Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Supply of Adhesive Materials (TRA-BOND F112 / EPO-TEK 353ND)

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the procurement and delivery of 7,000 kilograms of dual-part epoxy adhesives packaged in 2.5 GRM BIPAK units, strictly meeting the technical specifications of TRA-BOND F112 and EPO-TEK 353ND. These adhesives are critical for high-performance bonding applications within defense systems and must adhere to stringent quality and compositional standards to ensure reliability under operational conditions. Delivery is structured under FOB Destination terms, with the final destination designated as Camp Zama, Japan, requiring the supplier to manage all transportation logistics and associated costs until the materials are physically received at the specified location. The procurement is classified as a subcontract under NAICS code 325510, indicating the chemical manufacturing sector, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The contract was posted on July 17, 2026, and is part of a broader supply chain effort to maintain operational readiness through guaranteed access to certified adhesive materials. Although specific delivery timelines, payment terms, or inspection protocols are not detailed here, compliance with the specified technical standards and timely delivery to Camp Zama are central obligations. The contract’s visibility through the DIBBS portal reflects its integration into formal Defense Department procurement tracking systems for transparency and fulfillment verification.

General Info

7,000 kg of certified epoxy adhesives delivered FOB Camp Zama, Japan, for defense use.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325510 - Paint and Coating ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Procurement and delivery of 7.000 kilograms of dual-part epoxy adhesives in 2.5 GRM BIPAK packaging, conforming to TRA-BOND F112 and EPO-TEK 353ND specifications, with FOB Destination delivery to Camp Zama, Japan.

Similar Contracts

Same NAICS industry code

NAICS: 325510
New
DIBBS
POLYURETHANE COATINGThis contract specifies the procurement of polyurethane coating in accordance with MIL-PRF-85285E, Type 2 for support equipment applications, with a maximum VOC limit of 340 grams per liter and a high-solids formulation. The coating consists of two components: Component A, a pigmented polyester resin and solvent, and Component B, a clear aliphatic isocyanate, combined to yield a total volume of 2 quarts (1.89 liters). The finished product must conform to Federal Standard 595, Color No. 16473, Gloss Gray. The item is identified by NSN 8010-01-380-3282 with a quantity of 10 kits, and delivery is required within 49 days after contract award. The coating is subject to a 12-month shelf life, extendable under applicable requirements, and each unit must be labeled with a MIL-STD-129 label that includes the lot or batch number. The supplier must comply with all applicable DLA technical and quality requirements referenced by R and I numbers, packaging standards, and the removal of government identification from non-accepted supplies. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) labels compliant with 29 C.F.R. 1910.1200, effective June 1, 2015, prior to award. These documents must align with the Globally Harmonized System and replace outdated Material Safety Data Sheets. Employees must be trained on the new SDS formats, labeling requirements, and hazard communication protocols. The contract also applies Covered Defense Information standards, and all documentation must adhere to the specifications outlined in DLA’s Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. The solicitation number is SPE8ES-26-T-2446, issued by the DLA San Joaquin office, with a response deadline of August 3, 2026, and primary point of contact available via email for inquiries.
DLA DIST SAN JOAQUIN

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325510
New
Federal
PRIMER COATINGThis contract mandates the supply of PRIMER COATING under a fixed-price arrangement with stringent quality and security requirements, issued under Emergency Acquisition Flexibilities. The item, identified by NSN 8010-015652617 and quantity of 2500 units, must conform to MIL-I-45208 inspection standards and MIL-STD-130 marking specifications, with ISO 9001 certification accepted as an alternative to MIL-I-45208. The contractor must hold a valid U.S. security clearance of at least confidential level due to access requirements for classified documents including NAVSEA 690-6726598 and NAVSEA 690-6726597, both marked Confidential. All classified material must be processed exclusively at the Valencia, CA facility (CAGE 0G1Z3); the Mount Laurel, NJ site (CAGE 22354) is prohibited from handling any classified content. The contract requires a DD Form 254 and imposes a national defense priority rating under the Defense Priorities and Allocations System. The material must be mercury-free with no contamination, and any use of mercury requires prior written approval with detailed safeguards and warning labeling. Compliance with Buy American provisions, Small Business Subcontracting Plan requirements, and Contractor Purchasing System Administration standards are mandatory, with all contractual documents deemed issued upon electronic transmission. The contractor is fully responsible for inspection and quality assurance, maintaining systems that ensure adherence to all contract specifications, with inspection records retained for four years after final delivery. Packaging must comply with MIL-STD-2073, and any alteration to design, material, or part number requires prior written approval with detailed documentation. The solicitation is issued with a narrow response window closing on July 27, 2026, and an award will be bilateral, contingent on the contractor’s written acceptance. Access to supporting documents must be requested through SAM.gov, and all inquiries should be directed to Alison N. Bruker at the provided Navy email address. The procurement is administered by NAVSUP Weapon Systems Support in Mechanicsburg, PA, with the final contract subject to compliance with all applicable federal regulations, including FAR 52.209-1 and the Security Prohibitions and Exclusions applicable to classified work.
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in about 9 hours
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 339113
New
DIBBS
HARNESS ASSEMBLY, MASK,The contract is for one unit of a harness assembly, mask, oxygen, identified by NSN 4240-01-392-6079 and part number 460-190-457, supplied by Interspiro Inc based in Branford, CT. Delivery is required within 20 days from the contract award, with shipment to be made FOB origin and delivered to the specified address in Gulfport, MS. The item must be packaged in strict accordance with MIL-STD-2073-1E, using packaging method 10, and labeled in compliance with MIL-STD-129 without special marking. Plastic materials are to be avoided for wrapping, cushioning, or dunnage whenever contract terms allow. All packaging, marking, and shipping of this non-hazardous item must follow applicable DLA procedures, and the item must be shipped by the fastest traceable means, explicitly prohibiting parcel post. Inspection and acceptance occur at the destination point, with no variance allowed in quantity—exactly one unit is required. The contract is issued under solicitation SPE8E6-26-T-3869 by the Defense Logistics Agency and incorporates technical and quality standards referenced in the DLA Master List, with revisions controlled by the solicitation issue date. The item is procured using the DoD authorized unit of issue, and all government identification must be removed from non-accepted supplies. The contract includes specific transportation and shipping instructions tied to DLA procedural notes, and delivery must be achieved by the original required date of July 28, 2026. The point of contact for inquiries is John Lieb, and the procurement falls under NAICS code 339113. The item is designated for government use only, with associated control codes and identifiers applied for internal tracking and logistics coordination.
Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
FLOAT, VALVEThe contract specifies the supply of a FLOAT, VALVE with NSN 4820015106023, with a single unit required under two CLINs, each for one EA at a unit price of $1.00. Delivery is due within 20 days FOB destination, with no variance allowed in quantity and inspection and acceptance performed at the final delivery point. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special markings required. Palletization adheres to DLA’s packaging requirements, and shipment must be sent via the fastest traceable means, explicitly prohibiting parcel post. The destination is the USS FT LAUDERDALE (LPD 28) at FPO AE 09595, with vessel shipment procedures and DLA transportation notes C19 and C20 applying. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in specific items like batteries, fluorescent lamps, instruments, sensors, weapon systems, or authorized chemical reagents, and any portable mercury-containing devices must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. The contract references the DLA Master List of Technical and Quality Requirements for incorporated technical specifications and mandates compliance with all applicable defense logistics standards. The original required delivery date is July 22, 2026, solicitation number is SPE7MC-26-T-154Q, and the responsible contracting office is under the Defense Logistics Agency with primary point of contact Paula McClary.
Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333415
New
DIBBS
CONDENSING UNIT, REFThe contract is for a single condensing unit for refrigeration, identified by part number D7AB-0150-TAD-001 MOD R134A and NSN 4130014795974, supplied by Emerson Climate Technologies Inc. CAGE 5L3D4, under solicitation SPE8E8-26-T-4847. Delivery is required within 20 days to the USS Ronald Reagan CVN 76 at FPO AP 96616, with FOB destination terms, zero variance allowed in quantity, and acceptance occurring at the delivery point. The unit must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, using preservation method code 10 per ASTM D3951, and must not contain mercury or mercury compounds except as expressly permitted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA, with portable mercury-containing items requiring shockproof design and secondary containment. All packaging and shipment must adhere to RP001 and the specified palletization and containment codes, with shipments directed via the DLA VSM system using the fastest traceable means—parcel post is prohibited. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date as applicable. The purchase request is 7017607400, with a total price of $1.00 for a single unit, and the original required delivery date is July 22, 2026.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
MAGAZINE, CARTRIDGEThis contract specifies the procurement of 50 magazine cartridges with part number MAG291-MCT manufactured by MAGPUL INDUSTRIES CORP, under the NSN 1005-01-717-7475 and solicitation number SPE7L7-26-T-4453. The item is classified as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, requiring all manufacturers and exporters to be registered with the Directorate of Defense Trade Controls; failure to provide registration documentation will disqualify any offer. The contract incorporates all applicable technical and quality requirements from the DLA Master List, which override other standards such as ASTM D3951, and mandates packaging in compliance with MIL-STD-129 and DLA packaging guidelines. Supply chain traceability documentation must be retained by the contractor in accordance with DLAD Procurement Note C03, though unit identification is not required per the service customer’s request. Delivery is FOB origin within 20 days of contract award, with inspection and acceptance occurring at the destination. Shipment must be made by the fastest traceable means and cannot use parcel post, with destination details provided for both parcel and vessel delivery. The unit of issue is each, with no variance allowed in quantity, and the contract includes specific transportation and logistics directives referenced in DLAD Procurement Notes C19 and C20.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333415
New
DIBBS
FILTER ELEMENT, AIRThe contract pertains to the procurement of one air filter element with NSN 4130-20-006-8403 and part number D259-05309, sourced from KNUDSEN ENGINEERING LTD, under solicitation SPE8E8-26-T-4853. The item must be delivered within 20 days FOB destination, with no tolerance for quantity variance, and is subject to full compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including no special marking. Packaging and palletization must conform to DLA’s DLA Packaging Requirements for Procurement, with all units shipped in compliance with DoD unit-of-issue specifications. Delivery is directed to two separate U.S. Navy vessels—USS STOCKDALE DDG 106 in FPO AP 96678 and USS BATAAN LHD 5 in FPO AE 09554—each requiring distinct shipping routes and transportation protocols, with vessel shipments mandating the fastest traceable means and explicit prohibition of parcel post. The contract references technical and quality requirements from the DLA Master List, effective on the solicitation or award date depending on acquisition size, and incorporates additional logistics and administrative controls including vendor shipment management codes, project tracking identifiers, and government-only disposition fields. The original required delivery dates are March 3, 2022 and March 9, 2023 respectively, though current need dates are unspecified.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details