Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Aerospace-Grade Raw Materials for Pump Housings

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of certified aerospace-grade raw metal stock, specifically billets, bars, or forgings, intended for pump housings under DLA Aviation supply contracts. The materials must strictly adhere to specific alloy and heat-treat specifications for NSN 2840-00-784-4694 and must be delivered with full traceability and Mill Test Reports. Managed by the Department of Defense through the DLA Weapons Support SMSG Aviation Supply Chain, the contract requires strict compliance with the Berry Amendment and the Buy American Act. Performance will take place at Tinker AFB, with a response deadline set for November 9, 2026.

General Info

Supply of aerospace-grade metal stock for pump housings at Tinker AFB by 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4AX-27-T-0011.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HOUSING, SEAL, PUMP H

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies certified aerospace-grade raw metal stock for prime contractors on DLA Aviation supply contracts. Sources billets, bars, or forgings meeting specific alloy and heat-treat specifications for NSN 2840-00-784-4694. Ensures compliance with Berry Amendment and Buy American Act. Delivers raw materials with full Mill Test Reports and traceability.

Similar Contracts

Same NAICS industry code

Supply of Aviation-Grade Raw Material for Angle BracketsThis subcontract involves the supply of certified aviation-grade raw metal stock for the production of angle brackets under the DLA Weapons Support SMSG Aviation Supply Chain. The provider is responsible for sourcing alloys that strictly adhere to Government Design Control Activity specifications and ensuring all materials are delivered directly to the fabricator. To maintain regulatory compliance, the supplier must provide Material Test Reports and Certificates of Conformance in accordance with DFARS Buy American Act requirements. The project is managed by the Department of Defense with the place of performance located at Tinker AFB.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 2 hours ago

DEADLINE

Supply of Aerospace-Grade Metal TubingThis subcontract involves the supply of raw aerospace-grade metal tubing to prime contractors supporting DLA Weapons Support aviation supply contracts. The materials must strictly adhere to the chemical and physical specifications outlined in Drawing 77445 822837 and be delivered as certified raw metal stock. To ensure quality and compliance, the provider must maintain full material traceability through Mill Test Reports and operate in strict accordance with the Buy American Act and the Berry Amendment. The contract is managed under the Department of Defense for the DLA Weapons Support SMSG Aviation Supply Chain, with the place of performance located at Tinker AFB. Falling under NAICS code 331210, the solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 2 hours ago

DEADLINE

Supply of Certified Aerospace Alloys (BMS Specifications)This subcontract, titled Supply of Certified Aerospace Alloys (BMS Specifications), involves the provision of raw materials for prime contractors working on DLA Weapons Support ASC projects for the Department of Defense. The scope of work requires the sourcing and certification of alloys according to specific Boeing Material Specifications, including BMS8-80, BMS8-11A, BMS9-3T, and BMS10-11. To ensure quality and compliance, the provider must deliver certified raw materials accompanied by mill test reports and maintain full material traceability documentation in accordance with C03 Contractor Retention of Supply Chain Traceability. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331210. It was posted on November 2, 2026, with a response deadline of November 16, 2026. The contract is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

Supply of Berry Amendment Compliant Raw MaterialsThis subcontract involves the sourcing and delivery of aerospace-grade raw metallic materials for prime contractors supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The scope of work requires the provision of certified raw materials delivered directly to the manufacturer, with a strict mandate that all metals comply with the Berry Amendment and the Buy American Act. To ensure regulatory adherence, the provider must submit mandatory disclosures and mill test reports certifying the domestic origin of all supplied materials. Managed under the Department of Defense, the contract is associated with NAICS code 331210 and specifies Tinker AFB as the place of performance. The solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 2 hours ago

DEADLINE

Aerospace-Grade Alloy Supply for Spur GearsThis subcontract involves the supply of raw metal stock and aerospace-grade alloys for prime contractors working on DLA Aviation Supply Chain projects, specifically for spur gears under NSN 3020015341738. The provider must ensure all materials meet the metallurgical standards defined in the Technical Data Package and strictly adhere to the Buy American Act and Berry Amendment. To maintain the integrity of Critical Safety Items, the contractor is required to provide Mill Test Reports for full material traceability and deliver certified raw material stock. The project is managed by the Department of Defense through the DLA Weapons Support SMSG Aviation Supply Chain Corporate LTC, with the place of performance located at Tinker AFB.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 2 hours ago

DEADLINE

Certified Alloy Steel SupplierThis subcontract opportunity is for a Certified Alloy Steel Supplier to provide certified raw materials to prime contractors supporting NAVSUP Weapon Systems Support projects for the Department of Defense. The scope of work involves sourcing and delivering mill-certified forgings and tubing, specifically including ASTM-A336, ASTM-A335, and ASTM-A322 standards. To ensure strict compliance with Special Emphasis Level I material tracking, the supplier must provide comprehensive material test reports for all delivered raw metal stock pipes and forgings. This requirement falls under NAICS code 331210, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Supply of 2.50 Inch Small PipeThis subcontract involves the manufacture or sourcing of two units of 2.50 inch small pipe for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. All piping must strictly adhere to NSN 4710-01-621-1340 and IRPOD technical drawings to ensure compliance with government specifications. The scope of work includes specialized cleaning and packaging processes governed by MIL-STD-129, MIL-STD-2073-1, and MIL-PRF-23199, utilizing MIL-DTL-24466 green poly bags. Final delivery of the processed units is required on a FOB Destination basis. The opportunity is categorized under NAICS code 331210, with a response deadline set for November 30, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Supply of Raw Materials for NRP Backplate AssemblyThis subcontract involves the supply of certified aerospace-grade raw materials, specifically raw stock plates, bars, or forgings, for the NRP Backplate Assembly under DLA Aviation projects. The materials must strictly adhere to the specifications for NSN 6680-01-619-7395 and be delivered directly to the manufacturer. To ensure full traceability for Critical Application Items, the provider is required to furnish Material Test Reports and Certificates of Conformance. Managed by the Department of Defense through Pa DLA Aviation At Philadelphia, the contract falls under NAICS code 331210. A critical requirement for this engagement is full compliance with the Buy American Act. Interested parties should note the response deadline of November 16, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 7 hours ago

DEADLINE

Supply of Raw Materials for Groove PulleyThis subcontract involves the supply of certified raw metal stock or castings for prime contractors supporting DLA Weapons Support projects, specifically for the production of groove pulleys. The contractor is required to provide high-grade industrial alloys or steel that strictly adhere to the metallurgical specifications for NSN 3020-01-515-0209. To ensure full compliance with technical requirements and the Buy American Act, the provider must submit detailed Material Test Reports along with the delivery of the certified raw material. Managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, the contract falls under NAICS code 331210. The place of performance is located in Portsmouth, New Hampshire. Interested parties must adhere to the response deadline of November 12, 2026, to be considered for this procurement effort.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Metallic Tubes and Fittings (NSN 4710-01-361-2538)This subcontract involves the fabrication and supply of five metallic tube and fitting units, specifically NSN 4710-01-361-2538, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for ensuring all units meet DLA technical specifications and RA001 quality requirements, with packaging and marking performed according to RP001 and MIL-STD-129 standards. Finished assemblies are to be delivered to DLA Distribution San Joaquin in Tracy. To be eligible for this contract, the provider must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The project falls under NAICS code 331210 and is managed under the Department of Defense. Interested parties must respond by November 12, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Welded Grade B Carbon Steel Square TubingThis HUBZone set-aside subcontract involves the supply of welded Grade B carbon steel square tubing for prime contractors working on projects for the Department of Defense DLA Weapons Support Fluid Handling Division. The requirement specifies a total of 6,150 feet of tubing with a 4.00 inch by 4.00 inch profile and a 0.250 inch wall thickness. All materials must adhere to ASTM A500/A500M Revision M and QAP 13873 standards. The tubing must be provided in random lengths ranging from 16 to 22 feet. Specific packaging and marking requirements include marking items every three feet and bundling the materials in accordance with MIL-STD-2073-1E. The contract falls under NAICS code 331210, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Specialty Metals for Valve FabricationThis subcontract, titled Supply of Specialty Metals for Valve Fabrication, involves the procurement of raw specialty metal materials for prime contractors fulfilling DLA supply contracts. The scope of work focuses on sourcing and certifying metals that strictly adhere to domestic sourcing requirements under DFARS 252.225-7008, 7009, and 7010. To ensure full compliance with military specifications, the provider must supply all necessary Mill Test Reports and material certifications for the raw metal stock used in valve fabrication. Managed by the Department of Defense through the DDSP New Cumberland Facility, this opportunity is designated as a Total Small Business Set-Aside under NAICS code 331210. The performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by the deadline of November 12, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

Same awarding agency

Manufacturing of Combustion Chamber Plates (NSN 2840-01-159-6767)This subcontract involves the manufacture and supply of 540 precision-engineered combustion chamber plates, identified as NSN 2840-01-159-6767, for prime contractors supporting the Department of Defense DLA Weapons Support SMSG Aviation Supply Chain. The work requires precision machining and forming to aerospace tolerances using CNC equipment, with performance taking place at Tinker AFB. The contractor must maintain strict adherence to quality standards, specifically SAE AS9003 or ISO 9001, and utilize MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the provider must ensure full compliance with the Buy American Act and meet CMMC Level 2 cybersecurity requirements.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized packaging and marking for prime contractors supporting DLA aviation supply contracts. The scope of work requires the packaging of items according to ASTM D3951 and marking in compliance with MIL-STD-129. Additionally, the provider must implement DLA Master List requirements RP001 and RQ017 to ensure proper physical identification and bare item marking. The specific deliverable for this contract consists of 29 units of tube assemblies, which must be packed and labeled for shipment to the DLA Distribution Depot Oklahoma. Performance will take place at Tinker AFB, and the project falls under NAICS code 561910 for the Department of Defense.

Packaging and Labeling Services

POSTED

about 2 hours ago

DEADLINE

Precision Manufacturing of Metal Tube AssembliesThis subcontract involves the precision manufacturing of 29 metal tube assemblies for the Department of Defense, specifically supporting DLA aviation supply contracts. The fabrication must strictly follow TDP Rev A Gen 1 and RTX Corporation part numbers 458123 and 646787, while adhering to Reference QAP 77445 MQR-PSD-1. A zero non-conformance policy is in effect, and the use of additive manufacturing is strictly prohibited for these components. The contractor is required to maintain CMMC Level 2 and NIST SP 800-171 compliance to ensure data security. Performance will take place at Tinker AFB, with the final deliverable consisting of 29 completed and inspected aviation tube assemblies. The solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

Precision Fabrication of Angle Brackets (NSN 5340-00-810-7046)This subcontract involves the precision fabrication of 134 angle brackets under NSN 5340-00-810-7046 for the Department of Defense, specifically supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The manufacturer must adhere strictly to Government Design Control Activity specifications and ensure all units are marked, labeled, and packaged in accordance with MIL-STD-129 and ASTM D3951 standards. Performance of this contract requires the provider to hold JCP certification and maintain ITAR/EAR approval. The final deliverable consists of 134 finished and packaged brackets to be associated with operations at Tinker AFB. Interested parties must respond by November 9, 2026.

POSTED

about 2 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for critical aircraft engine components supporting DLA Weapons Support projects. The contractor is responsible for ensuring all items are processed in strict accordance with MIL-STD-2073-1E and MIL-STD-129, specifically adhering to preservation method 10 and cleaning and drying requirement 1. The use of MIL-SPEC packaging materials and specialized marking equipment is mandatory to meet these standards. The final deliverables consist of packaged and marked components prepared for FOB Origin shipment to Tinker AFB. This requirement is managed under NAICS code 561910 for the Department of Defense, specifically the DLA Weapons Support SMSG Aviation Supply Chain organization.

Packaging and Labeling Services

POSTED

about 2 hours ago

DEADLINE

Aerospace Component Precision MachiningThis subcontract for Aerospace Component Precision Machining involves the final machining, drilling, and finishing of No. 4 bearing breather tube shields for DLA Weapons Support. The selected contractor must execute precision machining according to RTX Corporation part number 481080, ensuring physical identification and bare item marking comply with RQ017. Final inspections must be conducted in accordance with MIL-STD-1916 or ASQ H1331 to deliver fully finished and inspected heat shields. The project requires the use of CNC milling and turning centers and mandates that the provider holds SAE AS9003 or ISO 9001 certification along with a CMMC Level 2 Self-Assessment. Performance will take place at Tinker AFB. Interested parties must respond by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 332710.

POSTED

about 2 hours ago

DEADLINE

Aircraft Engine Heat Shield Casting/ForgingThis subcontract involves the casting or forging of metal heat shield blanks for the No. 4 bearing breather tube, supporting DLA Weapons Support projects. The contractor must produce these critical application items in accordance with RTX Corporation part number 481080 specifications. Due to the technical nature of the work, the provider is required to possess specialized tooling and high-temperature alloy casting or forging equipment. Compliance requirements include mandatory SAE AS9003 or ISO 9001 certification and a CMMC Level 2 Self-Assessment. The project is managed under the Department of Defense through the DLA Weapons Support SMSG Aviation Supply Chain organization, with the place of performance located at Tinker AFB. Interested parties must adhere to the response deadline of November 9, 2026.

Rolled Steel Shape Manufacturing

POSTED

about 2 hours ago

DEADLINE

Aerospace-Grade Raw Material Supply (Berry Amendment Compliant)This subcontract involves the supply of aerospace-grade raw alloys or bar stock to prime contractors supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The provider must deliver certified materials that strictly adhere to the chemical and physical properties outlined in TDP Rev A Gen 1. To ensure quality and regulatory adherence, the contract requires full material traceability, the provision of Mill Test Reports, and strict compliance with the Berry Amendment and the Buy American Act. The project is managed under the Department of Defense for the DLA Weapons Support SMSG Aviation Supply Chain Corporate LTC, with the place of performance located at Tinker AFB. Interested parties must respond by November 9, 2026, regarding this requirement categorized under NAICS code 336413. The primary objective is the reliable delivery of certified raw material stock directly to the manufacturer.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

Precision Machining/Manufacturing of Bearing Retaining Nuts (CSI)This subcontract involves the precision machining and manufacturing of three high-precision bearing retaining nuts, identified by NSN 5310-00-771-1489, for the Department of Defense under the DLA Weapons Support SMSG Aviation Supply Chain. The project requires strict adherence to Technical Data TDP Rev A Gen 1 and Air Force Critical Safety Item standards, with performance taking place at Tinker AFB. To qualify, the manufacturer must possess SAE AS9100 quality management certification and hold a Joint Certification Program certification to handle export-controlled data. The contract is categorized under NAICS code 332710 and requires specialized CNC machining capabilities to meet the rigorous safety and technical specifications of the aviation supply chain.

POSTED

about 2 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense, specifically the DLA Weapons Support aviation supply chain. The contractor is responsible for providing specialized packaging and marking for prime contractors, ensuring all components are processed according to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. Key tasks include applying lot and serial numbers and CAGE codes using industrial marking equipment and anti-corrosion materials to deliver shipment-ready goods. The project requires strict adherence to DFARS 252.223-7001 compliance and will be performed at Tinker AFB. This opportunity falls under NAICS code 488410, with a response deadline of November 9, 2026.

Motor Vehicle Towing

POSTED

about 2 hours ago

DEADLINE

Manufacturing of Spur Gears (Critical Safety Item)This subcontract involves the manufacture and delivery of 16 spur gears to support DLA Weapons Support aviation supply chain projects. The components must be produced to match RTX Corporation part number 820462, adhering strictly to TDP Rev A Gen 1, QAP 13873 QAP-E09 Rev A, and QAP 77445 MQR-PSD-1 Rev 2. Due to the technical nature of the project, the contractor is required to utilize precision gear cutting and grinding equipment. As these components are designated as Critical Safety Items, the provider must hold CSI certification and submit a CMMC Level 2 self-assessment. The work is associated with the Department of Defense and is designated for performance at Tinker AFB. Interested parties must respond by November 9, 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS