This Subcontract opportunity from Georgia was posted on January 9, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Anodized Aluminum & Corrosion-Resistant Materials

Closed

State & Local

Submission Closed02/11/2024, 07:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331313

New

SLED

45-Degree Aluminum Alloy Bolted Terminals

POSTED

DEADLINE

STAND, SURGICAL INSTRUM

Solicitation # SPE2DH-27-T-0474

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Solicitation # SPE2DH-27-T-0464

Solicitation SPE2DH-27-T-0464 is a small business set-aside procurement for 12 plastic sterilization trays designed for the disinfection and cold sterilization of endoscopic surgical instruments. Each tray must measure 29 x 8.5 x 5 inches and include a liner. The items are regulated by the FDA as Class II devices, requiring registration, listing, and adherence to GMPs, and must be marked according to Medical Marking Standard No. 1. The required delivery date is November 10, 2026, with a delivery timeframe of five days after order, shipped FOB Destination to the Naval Med Readiness Logistics Command in Williamsburg, Virginia. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and RP001 for palletization, requiring suitable sealed unit containers and commercial exterior shipping containers. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Key regulatory clauses include FAR 52.246-2 for destination inspection, DFARS 252.225-7001 regarding the Buy American program, and DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

DISPOSAL CONTAINER, HYP

Solicitation # SPE2DH-27-T-0424

Solicitation SPE2DH-27-T-0424 is a small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of hypodermic needle disposal containers. Specifically, the requirement is for two packages of the Sharps Shuttle P2 (NSN 6530-01-619-5671), described as Sage storage containers measuring 1.25 by 6 inches that hold up to six needles vertically. The delivery is required within five days after receipt of the order, with the destination for inspection and acceptance being the USS Makin Island (LHD 8) in FPO AP 96672. Bidders must specify the source and part number being supplied and provide a complete data package if offering an alternate part. Packaging must be commercial and utilize sealed unit containers per MIL-STD-2073-1E, with marking adhering to Medical Marking Standard No. 1. The contract incorporates various FAR and DFARS clauses, including requirements for basic safeguarding of contractor information systems, the Buy American Act, and hazardous material labeling. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow system. Quotations are due by November 12, 2026, to the issuing office in Philadelphia, Pennsylvania.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

CONTAINER, UTILITY, MEDI

Solicitation # SPE2DH-27-T-0410

Solicitation SPE2DH-27-T-0410 is a Request for Quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of nonsterile, general-purpose medical utility containers under NSN 6530015840672. The required items must have a 64-ounce capacity, feature a snap lid, and be capable of being frozen and thawed. The order consists of one package containing 50 units. Delivery is required within 20 days after the order is placed, with an original required delivery date of November 6, 2026. The shipping terms are FOB Destination, with the delivery point specified as the USNS Comfort (TAH 20) at FPO AE 09566-4008. The contractor must adhere to strict packaging and marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial, with each unit in a sealed container and packed in suitable exterior shipping containers per MIL-STD-2073-1E at packing level B. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and compliance with various FAR and DFARS clauses, including those regarding the Buy American Act, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on certain telecommunications equipment. All quotes must be submitted via the DIBBS portal by November 12, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Raw Material Supply – Aluminum/Steel Alloy Sheet StockThe contract entails the supply of certified aluminum or steel alloy sheet stock to meet military or industrial specifications for the fabrication of electronic mounting trays. The materials must adhere to established standards to ensure compatibility, durability, and performance in defense-related applications, and the sourcing is restricted to qualified vendors capable of consistent compliance with quality and certification requirements. The contract falls under NAICS code 331313, indicating a focus on aluminum rolling, drawing, and extruding, and is classified as a subcontract within the Department of Defense structure managed by the Defense Logistics Agency. Performance obligations are tied directly to the production of electronic mounting trays, requiring precise material properties, dimensional tolerances, and traceability of alloy composition. The contract was posted on July 21, 2026, and is administered under the DLA’s procurement system with the identifier SPE4A726P5272. While no specific place of performance or point of contact is listed, all deliveries must support defense manufacturing workflows, and suppliers are expected to maintain certification records for inspection. The transaction is part of the broader DOD supply chain infrastructure aimed at securing critical components for electronic systems.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Aluminum/Steel Plate FabricationThe contract entails the supply of raw aluminum or steel plate materials that must comply with military or industrial specifications to support the fabrication of structural components. The materials are intended for use in defense-related applications and must meet stringent quality and performance standards to ensure compatibility with critical manufacturing processes. This subcontract is managed under the auspices of the Defense Logistics Agency, a component of the Department of Defense, and is categorized under NAICS code 331313, which pertains to aluminum Rolled Product Manufacturing. The solicitation was posted on July 21, 2026, and is part of a larger framework to secure essential raw materials for defense infrastructure projects. The place of performance and specific delivery locations are not specified, indicating flexibility for the supplier to fulfill requirements from various facilities, as long as the materials meet the defined specifications. The contract is directly linked to a system used by the Defense Logistics Agency for award tracking, and while no set-aside provisions or small business designations are noted, the focus remains on ensuring a reliable, high-quality supply chain for structural fabrication needs within the defense sector.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Materials Supply for Stiffener FabricationThe contract entails the supply of certified aerospace-grade raw materials, specifically 7075-T6 aluminum plate and titanium bar stock, to support the fabrication of stiffeners for defense components. All materials must strictly comply with MIL-DTL and AMS technical specifications to ensure integrity, performance, and traceability under demanding operational conditions. The materials will serve as critical inputs in the production of high-strength structural elements used in military aerospace platforms, requiring rigorous quality assurance and documentation throughout the supply chain. This agreement is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 331313 indicating classification within the primary metals industry. Although no solicitation number or specific place of performance is provided, the contract is linked to a DLA award record, implying it is part of a broader defense supply initiative. The materials must be sourced and delivered to meet exacting military standards, with an emphasis on material certification, dimensional precision, and compliance with defense procurement protocols. The contract supports national defense manufacturing priorities and is subject to all applicable federal regulations governing defense-supplied critical components.

Defense Logistics Agency

POSTED

DEADLINE

Raw Materials & Components SupplyThe contract involves the supply of aerospace-grade aluminum, advanced composites, and AI-enabled components specifically for the fabrication of structural panels, with all materials required to meet stringent defense standards. Full compliance with the Defense Federal Acquisition Regulation Supplement is mandatory, ensuring that sourcing, manufacturing, and delivery adhere to U.S. national security requirements. Comprehensive traceability systems must be implemented from raw material origin through final assembly to guarantee authenticity and prevent the introduction of counterfeit or non-compliant parts. The procurement is structured as a subcontract under the Department of Defense’s Defense Logistics Agency, classified under NAICS code 331313 for aluminum rolling, drawing, and extruding. Performance is expected to support critical defense applications, with no specific geographic restriction listed for place of performance. The contract was posted on July 17, 2026, and is accessible via the DIBBS portal under award number SPE4A726P3877. All supplied materials must align with the technical and regulatory rigor expected in defense aerospace systems, emphasizing quality assurance, supply chain integrity, and domestic sourcing where applicable.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Materials and Raw Stock SupplyThe contract titled Aerospace Materials and Raw Stock Supply is a subcontract issued by the Defense Logistics Agency under the Department of Defense, focused on providing raw aerospace materials essential for manufacturing air duct components. These materials include aluminum sheets, composite laminates, and insulation, all critical to the structural and thermal performance of aerospace systems. The contract was posted on July 13, 2026, and is categorized under NAICS code 331313, which corresponds to the rolling and drawing of aluminum and aluminum alloys, indicating the specialized nature of the required materials. Performance of the contract is not tied to a specific geographic location, suggesting delivery may occur across multiple production or assembly sites managed by the broader defense supply chain. There is no set-aside designation specified, meaning the contract is open to all eligible vendors without preferential treatment based on size, ownership, or other socioeconomic criteria. Access to contract details is available through the DIBBS system, but no point of contact information is provided in the public data.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply (Aluminum, Titanium, Composites)This subcontract, managed by the Defense Logistics Agency under the Department of Defense, governs the supply of certified aerospace-grade materials essential for component fabrication. The scope of the agreement specifically covers the procurement of aluminum 7075, titanium 6Al-4V, and carbon fiber pre-preg, ensuring that all materials meet strict industry certifications for aerospace use. Classified under NAICS code 331313, the contract was posted on June 30, 2026. It establishes the formal requirements for the delivery of these critical raw materials to support defense manufacturing operations.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Specialized Materials for Structural PanelsThe contract entails the supply of high-performance raw or semi-finished materials, including aluminum alloys and advanced composites, specifically designated for the fabrication of AI-enabled structural panels. These materials must meet stringent performance requirements to support defense applications, ensuring reliability, durability, and compatibility with integrated AI systems in structural components. The work is being procured as a subcontract under the broader procurement framework of the Defense Logistics Agency, operating within the Department of Defense, and is classified under NAICS code 331313, which corresponds to aluminum rolling, drawing, and extruding. The contract was posted on June 26, 2026, and the place of performance and point of contact details are not specified, indicating the supplier has flexibility in logistics coordination as long as deliverables meet technical and temporal obligations. The solicitation does not designate a specific set-aside classification, meaning participation is open to all eligible contractors without preference based on business size or type.

Defense Logistics Agency

POSTED

5 months ago

DEADLINE

N/A

AI Contract Overview

The City of Peachtree Corners in Georgia is seeking a subcontractor for the supply of certified anodized aluminum 3003 H14, stainless steel cases, and various other corrosion-resistant materials intended for vehicle construction. This procurement falls under NAICS code 331313 and focuses on securing high-quality materials capable of withstanding environmental degradation. The opportunity was posted on January 9, 2024, with a response deadline set for February 12, 2024. Interested parties can find further details and submission guidelines through the Georgia Department of Administrative Services portal.

General Info

Peachtree Corners seeks a subcontractor for corrosion-resistant vehicle construction materials by February 12.

Agency

Georgia → City of Peachtree Corners

NAICS

331313 - Alumina Refining and Primary Aluminum Production

Place of Performance

GA, USA

Set-Aside

NONE

Documents

This scope was carved out of PE-66492-NONST-2024-000000002.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

City of Bloomingdale 2024 Class A Recue Pumper

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJan 9

subcontract

Response DeadlineFeb 11

Deadline has passed

Submission Closed

02/11/2024, 07:00:00 PM EST

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGeorgia → City of Peachtree Corners

ContactsNo contacts available

OfficeN/A

Organization / AgencyGeorgia → City of Peachtree Corners

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of certified anodized aluminum (3003 H14), stainless steel cases, and other corrosion-resistant materials for vehicle construction.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS