Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Commercial Off-The-Shelf Sunscreen and Insect Repellent Spray

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of commercial off-the-shelf sunscreen and insect repellent spray products that are pre-formulated and fully compliant with FDA regulations, specifically tailored to meet military-grade packaging and labeling standards. Each product must guarantee a minimum 36-month shelf life under operational conditions and be prepared for direct delivery to Fort Bragg, North Carolina, with packaging designed to withstand military logistics and storage environments. The equipment must be ready for immediate issue upon arrival without requiring repackaging or additional processing. The solicitation, issued under the NAICS code 325611 for pharmaceutical and medicinal preparation manufacturing, is classified as a subcontract and remains open for responses until August 3, 2026. All bids must demonstrate adherence to strict regulatory and performance criteria to ensure compatibility with Department of Defense medical supply systems. Although no specific set-aside provisions are listed, the requirement is managed by the Medical Supply Chain Pharm FSA, reflecting its critical support role in force health protection. Full details and submission instructions are available through the official DIBBS portal linked in the solicitation.

General Info

Supply of FDA-compliant sunscreen and insect repellent with 36-month shelf life for Fort Bragg, military packaging, DOD standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSAView Agency

NAICS

325611 - Soap and Other Detergent ManufacturingView NAICS

Place of Performance

FORT BRAGG, NC, 28310, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of pre-formulated, FDA-compliant sunscreen and insect repellent spray meeting military packaging, labeling, and 36-month shelf-life requirements for delivery to Fort Bragg, NC.

Similar Contracts

Same NAICS industry code

Eco-Friendly Cleaning Supplies Supply

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

SANITIZER, HAND

Solicitation # SPE2DS-26-T-274K

The contract is for the procurement of hand sanitizer, specifically an alcohol-based waterless cleanser containing 70% ethyl alcohol, unscented, and packaged in 4 fl oz bottles. Each unit of issue is a package containing 24 bottles, and the total order quantity is three packages. The item must have a shelf life of exactly 36 months, which is non-extendable, and no more than five months may have passed between the date of manufacture and the date of delivery to the government. Packaging must comply with DLA packaging requirements, and the technical and quality specifications referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Government identification must be removed from any non-accepted supplies. The item is identified by NSN 8520-01-346-9200, with a delivery requirement of 20 days after order. The solicitation number is SPE2DS-26-T-274K, issued on July 27, 2026, with responses due by August 3, 2026. The procurement is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, with performance at Fort Bliss, Texas, and primary point of contact being Mary-Kathryn Donahue.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Solicitation # SPE2DP-26-T-4276

The contract is for the procurement of PURELL hand sanitizer in 3 fl oz bottles with special side grips for one-handed dispensing, designed to withstand temperature extremes, packaged in units of 24 bottles per package. The item is identified by NSN 6508-01-535-5409 and is subject to a strict 36-month non-extendable shelf life under TYPE I (CODE Q) requirements. Delivery is due within 20 days to Ellsworth Air Force Base, South Dakota, under FOB destination terms, with inspection and acceptance occurring at the delivery point. The unit price is $49.73 for a single package, resulting in a total contract value of $49.73. Packaging must comply with MIL-STD-2073-1E and marking must follow the Medical Marking Standard No. 1, incorporating barcoding and traceability standards. As a hazardous substance regulated by both OSHA and the FDA, the product must be accompanied by Safety Data Sheets (SDS) formatted in accordance with 29 CFR 1910.1200 and labeled in compliance with the Globally Harmonized System. Suppliers must submit SDS and hazard labels for approval prior to award and ensure employee training on updated Hazard Communication Standards. The product is manufactured by GOJO Industries Inc. under part number 9624-24 and NDC 21749-0965-03. The contract includes clauses related to combating human trafficking, employment eligibility verification, sustainable procurement, cybersecurity safeguarding, whistleblower protections, export controls, restrictions on hexavalent chromium and Communist Chinese military companies, and prohibitions on certain internal confidentiality agreements. Payment is to be processed electronically via Wide Area WorkFlow, and the solicitation is issued under the NAICS code 325611 by the Department of Defense’s Medical Supply Chain PHARM FSA.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Ultrasound Transmission Gel SupplyThe contract seeks the supply of ultrasound transmission gel packaged in sealed unit containers that meet FDA compliance standards and adhere to military-grade packaging and medical marking requirements. The product must be suitable for use in medical environments under stringent operational conditions, ensuring sterility, durability, and regulatory alignment throughout its lifecycle. Packaging must comply with all applicable military specifications for storage, handling, and deployment, with clear and permanent medical labeling to support field and clinical use. The solicitation is issued as a subcontract under the NAICS code 325611 for Pharmaceutical and Medicine Manufacturing, managed by the Department of Defense through the Medical Supply Chain FSH. The place of performance is designated as Fort Bliss, Texas, with a response deadline of July 30, 2026, and the opportunity was posted on July 23, 2026. All proposals must demonstrate full adherence to federal medical and defense standards, and bidders are expected to provide evidence of capability to deliver consistent, high-volume shipments meeting exacting quality and regulatory benchmarks.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

in about 10 hours

Supply of Fluoride Toothpaste – 9.0 oz (255 g) UnitsThe contract requires the annual supply of 6,500 units of 9.0 oz (255 g) fluoride toothpaste that is ADA-approved and flavored, delivered in retail-ready condition with full compliance to packaging, labeling, and quality inspection standards. All units must meet strict regulatory and consumer safety requirements to ensure consistency and reliability for end users. The offering is structured as a subcontract under NAICS code 325611, indicating it pertains to the manufacture of dental and oral care products. The solicitation was posted on July 22, 2026, with responses due by August 18, 2026, and is being managed by DOC CORRECTIONS in Missouri, though specific physical delivery locations and point of contact details are not provided. The contract emphasizes adherence to quality metrics and retail standards without specifying set-aside provisions or award preferences.

DOC CORRECTIONS

POSTED

DEADLINE

Supply of Fluoride Toothpaste – 6.4 oz (181 g) UnitsThe contract requires the annual supply of 8,000 units of 6.4 oz (181 g) fluoride toothpaste that meets ADA approval standards and includes flavoring, all delivered in new retail condition with full compliance to packaging and labeling specifications. Delivery must be made under FOB Destination terms, meaning the supplier is responsible for all costs and risks until the product reaches the designated destination. The solicitation is classified as a subcontract under NAICS code 325611, which corresponds to soap and cleaning compound manufacturing, and is managed by DOC CORRECTIONS in Missouri. Proposals are due by August 18, 2026, with the opportunity posted on July 22, 2026, and bidders must ensure all regulatory and quality requirements are met for approval and acceptance.

DOC CORRECTIONS

POSTED

DEADLINE

Supply of Fluoride Toothpaste – 4.2 oz (119 g) UnitsThe contract requires the annual supply of 12,000 units of ADA-approved, flavored fluoride toothpaste in 4.2 oz 119 g sizes, meeting retail quality standards with full packaging and labeling compliance. All units must be delivered to Missouri correctional facilities, ensuring consistent availability for inmate use. The product must adhere to dental health guidelines as recognized by the American Dental Association, and the supplier is responsible for end-to-end fulfillment including manufacturing, quality control, packaging, labeling, and timely distribution. The solicitation is structured as a subcontract with a response deadline of August 18, 2026, and was posted on July 22, 2026. The North American Industry Classification System code 325611 indicates the manufacturing of dental and orthopedic supplies and appliances. The contract is managed by the Missouri Department of Corrections under the agency name DOC CORRECTIONS, with performance obligations centered within Missouri correctional facilities. No set-aside provisions or specific procurement preferences are indicated, and all submissions must meet regulatory and logistical requirements for federal correctional supply chains.

DOC CORRECTIONS

POSTED

DEADLINE

Windshield Cleaning Compound SupplyThe contract involves the supply and delivery of a specialized windshield cleaning compound that meets the military specification NSN 6850009262275, ensuring compliance with required military standards for performance and quality. The product must be properly packaged and shipped to Subic Bay, Philippines, with a firm delivery deadline of August 10, 2026. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, and falls under the NAICS code 325611, which corresponds to the manufacturing of cleaning and polishing preparations. The procurement is part of a broader logistical effort to maintain operational readiness by ensuring vehicle maintenance supplies are available at designated overseas locations. All aspects of production, packaging, and shipping must adhere to federal and military protocols to guarantee timely and correct fulfillment without disruption to mission-critical operations.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Industrial Metal Cleaner (NSN 6850012513289) for DoD DeliveryThe contract requires the procurement and delivery of 13 quarts of industrial metal cleaner identified by NSN 6850012513289 to the USS MAKIN ISLAND (LHD 8) at FPO AP 96672. All deliveries must be completed by August 5, 2026, with shipments rated DPAS for priority handling and delivered via traceable methods that exclude standard parcel post. The supplier must comply with DFARS regulations for invoicing, ensuring accurate and auditable financial documentation. The product falls under NAICS code 325611 and is procured under a subcontract by the Defense Logistics Agency on behalf of the Department of Defense. The delivery location is a military installation, necessitating strict adherence to federal supply chain protocols and timelines.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Optical Lens Cleaning Compound (NSN 6850002271887)The contract is for the supply of five quarts of a military specification optical lens cleaning compound identified by NSN 6850002271887, requiring proper labeling and delivery FOB destination to a Defense Logistics Agency facility in Tracy, California. The item falls under NAICS code 325611, indicating it pertains to the manufacture of other chemical products, and the transaction is classified as a subcontract under the Department of Defense. The procurement is managed by the Defense Logistics Agency, with the delivery terms ensuring the product arrives at the specified DLA location, placing responsibility for shipping and final delivery on the supplier. The solicitation was posted on July 21, 2026, and the contract is linked to a specific award record in the DIBBS system, indicating it is part of an active acquisition process under a larger military logistics framework.

Defense Logistics Agency

POSTED

DEADLINE

Calcium Hypochlorite Disinfectant SupplyThe contract entails the supply and delivery of 9,000 units of 5-pound calcium hypochlorite disinfectant, identified by NSN 6840002388115, to Subic Bay in the Philippines. The terms specify FOB origin, meaning responsibility for the goods transfers to the buyer once the product leaves the seller’s facility, and the product must fully comply with military specifications to ensure suitability for its intended use. The contract is classified as a subcontract under the NAICS code 325611, which corresponds to the manufacturing of other inorganic chemical products. The awarding agency is the Defense Logistics Agency under the Department of Defense, indicating this is a military procurement requiring strict adherence to standards and operational requirements. Delivery is scheduled for a future date, with the contract posted on July 21, 2026, and no set-aside provisions are specified, meaning it is open to all eligible contractors regardless of size or status.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Industrial Solvent Cleaning CompoundThe contract involves the supply and delivery of three units of Cleaning Compound, Solvent with NSN 6850014541310 to Fort Drum, New York, under a delivery order issued against the base contract SPE4AX-16-D-9008. The product is classified under NAICS code 325611, indicating it is related to industrial chemical manufacturing, and the procurement is managed by the Defense Logistics Agency under the Department of Defense. Shipment must be delivered FOB destination, meaning the seller assumes all costs and risks until the goods arrive at the specified location, and must be transported via traceable means to ensure accountability and security throughout transit. This is a subcontract under a federal procurement vehicle, with no set-aside designation specified, suggesting it is open to any qualified vendor. The solicitation was posted on July 21, 2026, and while specific point of contact or detailed addresses are not provided, the delivery destination is clearly identified as Fort Drum, NY. The transaction is tracked through the DIBBS system under contract reference SPE4A626FCXFU and count 264072, ensuring visibility within the defense supply chain. Compliance with FOB destination terms and traceable shipping methods is critical to meeting contractual obligations and facilitating efficient logistics for military operations.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA

Same awarding agency

TRICHLOROACETIC ACID

Solicitation # SPE2DP-26-T-4354

The contract specifies the procurement of Trichloroacetic Acid, ACS grade, 80% concentration, in 15 mL units, identified by NSN 6505-01-363-7674 and part number 749887 from AmerisourceBergen Drug Corp. The item is classified as a TYPE I (CODE M) with a non-extendable shelf life of 24 months and must be packaged and marked in full compliance with Medical Marking Standard No. 1, superseding MIL-STD-129. Packaging must meet commercial standards with sealed unit containers and shipping containers capable of preventing damage during transit, ensuring safe delivery by common carrier at the lowest cost to the designated destination in APO, 09094-3219. The item is regulated by the FDA, requiring referral through EBS for confirmation, and delivery must occur within 20 days FOB destination with zero quantity variance allowed. Inspection and acceptance occur at the delivery point. Suppliers must provide Safety Data Sheets (SDS) and labels compliant with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200), effective June 1, 2015, and must train employees on these requirements. All documentation must align with DLA’s Master List of Technical and Quality Requirements, and the unit of issue is BT, equivalent to 15 mL. The contract is issued under SPE2DP-26-T-4354, with a response deadline of August 4, 2026, and is governed by federal procurement regulations including DLA packaging and hazardous material handling standards.

Pharmaceutical Preparation Manufacturing

POSTED

about 14 hours ago

DEADLINE

DIBUCAINE OINTMENT

Solicitation # SPE2DP-26-T-4358

Dibucaine Ointment USP is a topical pharmaceutical product containing one percent dibucaine as the active ingredient, specifically formulated for rectal administration and external use only. It is supplied in a collapsible tube and a rectal applicator, with each unit of issue being a single package containing one ounce or 28 grams of the ointment. Storage requirements mandate a temperature range of 15 to 30 degrees Celsius (59 to 86 degrees Fahrenheit). The product is regulated by the FDA and must be marked in accordance with the latest edition of Medical Marking Standard No. 1, with a non-extendable shelf life of 36 months as a Type I (Code Q) item. Packaging must comply with MIL-STD-2073-1E, and government identification must be removed from any non-accepted supplies. The contract specifies a procurement quantity of two packages, to be delivered FOB destination within 20 days, with zero variance allowed in quantity. The item is identified by NSN 6505002999535 and NDC 00536-1211-95, supplied by The Harvard Drug Group, L.L.C. The solicitation number is SPE2DP-26-T-4358, with a response deadline of August 4, 2026, and the place of performance is Nellis AFB, NV. The contract includes adherence to DLA’s Master List of Technical and Quality Requirements, and buyers must submit referrals in EBS to confirm product compliance prior to award.

Pharmaceutical Preparation Manufacturing

POSTED

about 14 hours ago

DEADLINE

ALBUTEROL SULFATE INHA

Solicitation # SPE2DP-26-T-4353

Albuterol Sulfate Inhalation Aerosol with HFA is a prescription-only medication for oral inhalation, delivering 108 micrograms of albuterol sulfate per actuation, equivalent to 90 micrograms of albuterol base, supplied in an 8.5-gram canister containing 200 metered doses. The product must be stored at room temperature between 59°F and 77°F (15°C and 25°C), protected from extreme heat or cold, with specific warnings against puncturing, exposing to temperatures above 120°F, or spraying into the eyes. It has a non-extendable shelf life of 24 months and is classified as a TYPE I (CODE M) item under the Federal supply system. Labeling must include the National Stock Number, manufacturer date, expiration or retest date, contract number, and lot number, in compliance with the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery via common carrier. The product is regulated by the FDA and subject to Hazard Communication Standard requirements, mandating submission of Safety Data Sheets and compliant HCS labels aligned with 29 C.F.R. 1910.1200 prior to award, along with employee training on updated chemical labeling protocols. The contract specifies delivery of three units FOB destination within 20 days, with no variance allowed in quantity, and inspection and acceptance occurring at the delivery point. The NSN is 6505-01-543-6562, and the solicitation details identify Teva Pharmaceuticals USA, Inc. and Perrigo Direct Inc. as potential suppliers under procurement number SPE2DP-26-T-4353.

Pharmaceutical Preparation Manufacturing

POSTED

about 14 hours ago

DEADLINE

VECURONIUM BROMIDE FOR

Solicitation # SPE2DP-26-T-4359

Vecuronium Bromide for Injection is a freeze-dried powder containing 10 mg of the active ingredient, supplied in packages of ten vials each, with a total shelf life of 24 months. At the time of receipt by the first government activity, the product must have a minimum of 21 months of remaining shelf life. The powder must be stored at controlled room temperature between 20 to 25°C (68 to 77°F) and protected from light, with containers retained in their outer cartons until use. Packaging and labeling must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all units must be sealed and packaged in commercial shipping containers that ensure safe delivery via common carrier at the lowest rate. The product is not considered hazardous under FED-STD-313 and must be packaged in accordance with ASTM D3951, though DLA’s Master List of Technical and Quality Requirements takes precedence. Shipments must be sent by traceable means only; parcel post is prohibited. Deliveries are FOB destination with zero variance allowed, and inspection and acceptance occur upon arrival. The supplier is Hikma Pharmaceuticals USA Inc., with NDC 00143-9234-10, and the contract requires multiple deliveries across different locations and dates in July 2026, totaling eight line items for one or three packages per delivery. All packaging, palletization, and labeling must adhere to DLA Packaging Requirements for Procurement and specific storage and handling instructions.

Pharmaceutical Preparation Manufacturing

POSTED

about 14 hours ago

DEADLINE

ANALGESIC GEL, TOPICAL

Solicitation # SPE2DP-26-Q-0126

The product is an analgesic gel containing 5% menthol USP, packaged in 4 oz (118 ml) tubes, with 144 tubes per case, designated by NSN 6505-01-658-7643. It is classified as a flammable hazardous material and must be stored at 20–25°C (68–77°F), with a non-extendable shelf life of 24 months. The item is subject to stringent packaging and labeling requirements under the Medical Marking Standard No. 1, replacing MIL-STD-129, and must be shipped in commercially suitable containers that ensure safe transit via common carriers at the lowest rate. Each shipment must include a current Safety Data Sheet (SDS) compliant with OSHA’s Hazard Communication Standard (29 C.F.R. 1910.1200), and the SDS must be submitted to the contracting officer for approval prior to award. HCS-compliant labels are mandatory, and suppliers are required to train employees on SDS and labeling requirements. The product must be marked per Medical Marking Standard No. 1, and any hazardous material packaging must adhere to 49 CFR and ICAO regulations. The solicitation, issued under SPE2DP-26-Q-0126, requires delivery within 15 days to Fort Riley, 66442-0000, with responses due by August 3, 2026.

Photographic Equipment and Supplies Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

PETROLATUM, WHITE

Solicitation # SPE2DP-26-T-4355

The contract specifies the procurement of 8 units (TU) of white petrolatum, USP, with each TU equaling 28 milligrams, for a total quantity of 224 milligrams. The material must comply with stringent packaging and marking requirements per the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and must be packaged in sealed commercial unit containers that protect against damage, with exterior shipping containers ensuring safe, cost-effective delivery to the destination. The item is classified as a TYPE I (CODE Q) with a non-extendable shelf life of 36 months and must be shipped by the fastest traceable means, excluding parcel post. Delivery is required within five days of award under FOB destination terms with zero quantity variance permitted and acceptance occurring at the delivery point. The product must be commercially packaged per ASTM D3951 unless deemed hazardous under FED-STD-313, in which case TQ requirement IP025 applies; however, all DLA Master List of Technical and Quality Requirements override any conflicting standards. Packaging and labeling must reflect the specified unit of issue and quantity per unit pack, and palletization must adhere to DLA packaging guidelines. The delivery address is for the 0182 IN BN 01 HHC INFANTRY BN in Melrose, MA, with the required delivery date set for July 30, 2026, and the contract reference number is SPE2DP-26-T-4355.

Pharmaceutical Preparation Manufacturing

POSTED

about 14 hours ago

DEADLINE

TYPHOID VI POLYSACCHAR

Solicitation # SPE2DP-26-T-4363

The contract specifies the procurement of Typhoid Vi Polysaccharide Vaccine, a modified acellular vaccine supplied in 10 mL vials, with a total quantity of 10 vials, each containing 20 doses. The vaccine must adhere to the Medical Procurement Item Description (MPID) No. 3 dated 20 March 2006, with modifications including the substitution of “vial” for “box” in packaging references. The product must have a minimum shelf life of 18 months, with at least 15 months remaining at the time of delivery to the first government activity, and this shelf-life requirement is non-extendable. The vaccine requires constant refrigeration between 2 and 8 degrees Celsius (36 to 46 degrees Fahrenheit) throughout transport and storage, and all packaging, labeling, and marking must comply with the latest edition of the Medical Marking Standard No. 1 and MIL-STD-129. Commercial packaging must conform to ASTM D3951 unless overridden by DLA’s Master List of Technical and Quality Requirements, which take precedence. The product is to be delivered FOB destination within five days of the contract award, with no variance allowed in quantity. Delivery is directed to USS RALPH JOHNSON DDG 114 at FPO AP 96691-3300, with transportation governed by DLAD procedure notes C19 and C20. The contract is tied to NSN 6505-01-385-6328 and solicitation SPE2DP-26-T-4363, with an original required delivery date of 31 July 2026.

Pharmaceutical Preparation Manufacturing

POSTED

about 14 hours ago

DEADLINE

SUMATRIPTAN SUCCINA

Solicitation # SPE2DP-26-T-4365

Sumatriptan succinate tablets, 25 mg film-coated, are provided in bottles of nine tablets for the acute treatment of migraine with or without aura in adults and must be stored at controlled room temperature between 20 to 25 °C (68 to 77 °F) with protection from light. The contract specifies adherence to strict packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA packaging requirements and shelf life constrained to 24 months under Type I (Code M) non-extendable limits. Deliveries are scheduled for multiple military installations across Fort Bliss, Fort Hood, and Fort Bragg with firm delivery windows of 20 days and no variance allowed in quantity. Each shipment must be transported via traceable means excluding parcel post, with inspection and acceptance occurring at the destination. The contract includes multiple line items under solicitation SPE2DP-26-T-4365, totaling 54 units (nine-tablet bottles), with delivery dates ranging from April to July 2026, and all items carry the same NSN 6505017246289. The supplier must comply with technical and quality requirements referenced from the DLA Master List, and all labeling and documentation must conform to the Medical Marking Standard No. 1 and government-specific identifiers. Contract performance is tracked through detailed logistics codes, tracking numbers, and government-specific identifiers for procurement, distribution, and accountability.

Pharmaceutical Preparation Manufacturing

POSTED

about 14 hours ago

DEADLINE

Subcontract Management & Small Business Accelerated Payment ComplianceThe contract requires the administration of subcontract agreements with a focus on ensuring strict compliance with FAR 52.232-40, which mandates accelerated payments to small business subcontractors. This involves comprehensive tracking of subcontractor invoices, timely processing of payments, and accurate reporting to meet federal requirements. The workload centers on maintaining accountability throughout the subcontracting lifecycle to guarantee small businesses receive payment within the accelerated timeframe prescribed by regulation. Performance is to be conducted at Fort Bragg, North Carolina, under the auspices of the Department of Defense’s Medical Supply Chain Pharmaceutical FSA. The North American Industry Classification System code 541611 indicates the work relates to management consulting services, suggesting the scope may include oversight, process design, and compliance monitoring rather than direct supply or logistics. Bids must be submitted by August 3, 2026, and the contract type is specifically designated as a subcontract, implying the awardee will act as a prime contractor or higher-tier entity managing subcontractor relationships. There is no set-aside designation specified, meaning the opportunity is open to all eligible vendors regardless of business size or classification.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Logistics & Transportation for Hazardous Medical GoodsThe contract requires the transport and delivery of hazardous medical supplies under FOB destination terms, with all shipments obligated to be completed within five days of pick-up. Compliance with federal hazardous material shipping regulations is mandatory, ensuring the safe handling, labeling, packaging, and documentation of dangerous goods throughout the transportation process. Timely submission of WAWF documentation is critical to maintain operational continuity and meet federal accountability standards. The work is categorized under NAICS code 484220 for hazardous materials freight transportation, and the performance location is designated as Fort Bragg with a zip code of 28310. The contract is structured as a subcontract under the Department of Defense’s Medical Supply Chain PHSA, with responses due by August 3, 2026, after being posted on July 28, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Commercial-Grade Packaging & Kitting ServicesThe contract requires the provision of commercial-grade packaging and kitting services designed to ensure the safe, secure, and cost-effective shipment of sensitive medical supplies. This includes the full selection and specification of interior and exterior containers, appropriate cushioning materials, and unit-of-issue configurations that collectively prevent damage or breakage during transit. The packaging solution must be engineered to meet rigorous commercial standards while optimizing for efficiency and durability across all logistical phases. The work is specifically tied to performance at Fort Bragg, North Carolina, under the Department of Defense’s Medical Supply Chain Pharm FSA, and is solicited as a subcontract under NAICS code 323113, which categorizes it within commercial printing and related support activities. Interested parties must submit responses by August 3, 2026, with the opportunity arising from a federally managed procurement platform. The emphasis is on delivering packaging systems that maintain product integrity under varying transport conditions while aligning with defense logistics requirements and operational readiness standards.

Commercial Screen Printing

POSTED

DEADLINE

Hazard Communication & Labeling Compliance ServicesThe contract requires the development and submission of hazard warning labels and Safety Data Sheets (SDS) that fully comply with OSHA’s Hazard Communication Standard (29 CFR 1910.1200), ensuring all chemical hazard information is accurately communicated in accordance with federal regulations. This includes active coordination with suppliers to obtain and submit pre-award labels, verifying compliance before formal contract execution. The work is scoped to support medical supply chain operations for the Department of Defense, specifically tied to a performance location at Fort Bragg, North Carolina, with the North American Industry Classification System code 541690 indicating it falls under other scientific and technical consulting services. The solicitation was posted on July 28, 2026, and responses are due by August 3, 2026, under a subcontract structure, though no set-aside designation is specified.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE