This Government Contract opportunity from Government of Canada was posted on April 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Cryogenic Dewars

Closed

International

Submission Closed05/08/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332212

New

Federal

Automatic Door Operator Supply

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Lock Set Manufacturing and SupplyThe contract calls for the manufacture and supply of 535 lock set units per delivery order, with strict adherence to military specifications CID A-A-59486D and ASTM F883, ensuring mechanical durability, security, and performance under demanding conditions. All units must be delivered FOB origin within the continental United States, placing responsibility for transportation and associated risks on the buyer after shipment from the supplier’s facility. The solicitation is structured as a subcontract and is exclusively set aside for Service-Disabled Veteran-Owned Small Businesses, as defined by the SDVOSBC designation, ensuring eligibility and compliance with federal procurement priorities for veteran-owned enterprises. The North American Industry Classification System code 332212 identifies the industry as Lock and Security Equipment Manufacturing, aligning the work with specialized fabrication and assembly capabilities required for defense-grade hardware. The opportunity was posted on August 4, 2026, with responses due by August 19, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense, reflecting its critical role in supporting military logistics and equipment readiness.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Drainage Pipe and Culvert Materials SupplyThe contract is for the supply of corrugated metal pipe, precast concrete pipe, HDPE pipe, and associated fittings to support drainage rehabilitation and replacement projects under the Georgia Department of Transportation. This is a subcontract solicitation with a NAICS code of 332212, indicating the focus on metal pipe manufacturing and related products. All materials must meet specified standards for durability, structural integrity, and compatibility with existing infrastructure to ensure long-term performance in drainage systems. The solicitation is open for responses until September 1, 2026, and interested parties must submit proposals by the deadline to be considered for award. The place of performance and specific project locations are not detailed in the posting, but delivery and installation support will be required across Georgia’s transportation infrastructure network. Bidders are expected to demonstrate capacity for reliable supply, timely delivery, and adherence to state transportation specifications without requiring additional clarification or modification after award.

Department of Transportation

POSTED

DEADLINE

Precision Manufacturing of Pressure SwitchesThe contract calls for the manufacture of 21 pressure switches identified by NSN 5930013007740, fabricated strictly in accordance with technical drawing NR 97499 205-076-044-9, encompassing all phases of production including precision machining, final assembly, and comprehensive quality assurance. All work must adhere to the stringent requirements set forth by the Defense Logistics Agency and applicable military standards to ensure functionality, reliability, and compliance in operational environments. The solicitation is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside, restricting eligibility to qualified SDVOSB firms, and falls under NAICS code 332212 for electronic component and product manufacturing. Performance must be completed at the specified place of performance in Tracy, California, with a response deadline of August 10, 2026, and the contract is structured as a subcontract under the Department of Defense’s Electrical Devices Division.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

HDPE Pipe Supply – Standard Diameter (24” and 18” DR 32.5)The contract requires the supply of 5,000 feet of 24-inch and 8,700 feet of 18-inch DR 32.5 HDPE pipe for use in the South Boneta and Class B Canal projects. The material specification adheres to a standard dimension ratio of 32.5, ensuring consistent wall thickness and structural integrity for pressurized or gravity flow applications in irrigation or water conveyance systems. This is a subcontract opportunity under NAICS code 332212, which classifies it under pipe fitting and related manufacturing, indicating the need for suppliers with experience in producing high-density polyethylene pipe meeting industry and project-specific quality standards. All deliveries must meet technical requirements for material composition, pressure ratings, and dimensional tolerances to ensure compatibility with existing infrastructure. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, allowing potential vendors a 14-day window to submit proposals. The project is administered by the state of Utah with no set-aside provisions, meaning it is open to all qualified contractors regardless of business size or ownership characteristics. Performance location is tied to the South Boneta and Class B Canal systems, though specific geographic details are not fully defined in the provided data. The opportunity is hosted on a public platform accessible via a web link, and bidders are expected to fully comply with contractual terms regarding delivery schedules, inspection protocols, and certification documentation without explicit point of contact information provided.

POSTED

DEADLINE

HDPE Pipe Supply – Medium Diameter (42” DR 26, DR 17, DR 11)The contract calls for the supply of 3,750 feet of 42-inch high-density polyethylene pipe across three different dimension ratios—DR 26, DR 17, and DR 11—intended for use in the Class C and Coyote Canal projects. The pipe must meet specific engineering and material standards appropriate for each DR rating, ensuring structural integrity and performance under varying pressure and environmental conditions. Delivery is expected to support infrastructure development in Utah, with the materials designated for installation in water conveyance systems requiring durable, corrosion-resistant components. The solicitation is structured as a subcontract opportunity, open to qualified suppliers capable of meeting technical specifications and timely delivery requirements. The bidding window closes on August 12, 2026, with proposals needing to be submitted prior to the deadline of 5:00 PM Mountain Time. The opportunity is classified under NAICS code 332212, which corresponds to the manufacturing of plastic pipe and pipe fittings. While no set-aside provisions are specified, interested parties must comply with all technical and logistical expectations for material delivery, quality assurance, and compliance with project needs. The place of performance and agency details are tied to Utah, and the solicitation is hosted on the Bonfire Hub platform, where full documentation and submission guidelines are available to potential responders.

POSTED

DEADLINE

HDPE Pipe Supply – Large Diameter (63” and 54” DR 32.5)The contract calls for the supply of 22,300 feet of 63-inch diameter DR 32.5 HDPE pipe and 7,200 feet of 54-inch diameter DR 32.5 HDPE pipe, specifically for use in canal lining and water conveyance infrastructure. The pipes are engineered to meet high standards for durability and water transmission efficiency, with the DR 32.5 designation indicating a consistent wall thickness ratio suitable for demanding environmental and hydraulic conditions. The work is part of a larger public infrastructure initiative managed by the state of Utah, with all materials required to be delivered and installed in accordance with project specifications to ensure long-term performance and minimal maintenance. This subcontract opportunity is open for bids with a response deadline of August 12, 2026, and was posted on July 29, 2026. It falls under NAICS code 332212, reflecting its classification within the pipe and tube manufacturing sector. The solicitation is not set aside for any specific small business categories and is accessible through the Utah BonfireHub platform. While detailed performance location data is not provided, the infrastructure application implies deployment across state-managed water systems, requiring compliance with material quality, testing, and delivery standards typical for large-scale hydraulic projects. All subcontractors must be prepared to meet stringent fabrication and logistical demands given the size and scale of the pipe required.

POSTED

DEADLINE

Supply of Airframe Ball Bearing (NSN 3110-00-052-0812)The contract entails the procurement and delivery of a commercial off-the-shelf airframe ball bearing identified by the National Stock Number 3110-00-052-0812, with complete traceability to applicable military specifications. The item is supplied as-is, with no installation, assembly, or additional services included in the scope of work. The bearing must meet all required military standards and be fully documented to ensure accountability and compliance throughout the supply chain. The contract is classified as a subcontract under the NAICS code 332212 and is managed by the Defense Logistics Agency, a division of the Department of Defense. The solicitation was posted on July 21, 2026, and no set-aside provisions apply. The place of performance and point of contact details are not specified, but the award can be referenced through the DIBBS system using the contract number SPE4A626PA812.

Defense Logistics Agency

POSTED

DEADLINE

Non-Metallic Hose Assembly Supply (NSN 4720-01-453-6488)The contract entails the supply of non-metallic hose assemblies designated by NSN 4720-01-453-6488 for use in defense systems, specifically for fluid transfer applications where non-metallic materials are required for compatibility, safety, or operational performance. The work is classified under NAICS code 332212, indicating it involves the manufacturing of hose and hose fittings, and is structured as a subcontract under the Defense Logistics Agency, a division of the Department of Defense. Origin inspection and certification are mandatory requirements, ensuring that all materials and components meet strict defense standards for quality, traceability, and compliance with specified technical and safety criteria. Performance of the contract is not tied to a specific geographic location, and the solicitation was posted on July 20, 2026, with the award details accessible through the DIBBS system under contract SPE7MX26D0007.

Defense Logistics Agency

POSTED

DEADLINE

Grated PVC Pipe SupplyThe contract calls for the supply of durable, grated PVC pipe designed specifically for integration into an adit closure system, with stringent requirements for long-term performance under harsh environmental conditions and reliable drainage functionality. The material must withstand prolonged exposure to weather, moisture, and soil stress while maintaining structural integrity and consistent flow characteristics over decades of unattended use. All products must comply with technical specifications ensuring compatibility with existing closure methodologies and environmental safety standards. This is a total small business set-aside subcontract under NAICS code 332212, issued by the USDA Forest Service’s Stewardship Contracting Branch, with performance centered in Avery, Idaho, ZIP code 83802. Proposals must be submitted by August 24, 2026, and the opportunity is exclusively reserved for small businesses as defined by the SBA. The contract emphasizes local environmental stewardship and infrastructure resilience, aligning with federal land management objectives for sustainable mine and adit remediation.

Stewardship Contracting Branch Usda-Fs

POSTED

DEADLINE

Pressure Gage Supply and TestingThe contract entails the supply of calibrated pressure gages identified by NSN 6685-01-049-8055, requiring full traceability of calibration standards and adherence to military compliance testing protocols. Each unit must be accompanied by precise packaging, labeling, and certification documentation that meets all applicable military specifications, ensuring readiness for deployment in defense and logistics operations. The work is classified as a subcontract under NAICS code 332212, with the Defense Logistics Agency acting as the overseeing entity under the Department of Defense. The solicitation was posted on July 16, 2026, and is tied to contract number SPE4A624D50D4, indicating an active procurement cycle focused on maintaining critical measurement instrument inventory. While specific delivery locations and points of contact are not detailed, the performance location and organizational responsibilities align with DLA’s broader supply chain management objectives. Compliance with traceability and certification standards is non-negotiable, as these pressure gages support mission-critical systems requiring precision and reliability under operational conditions.

Defense Logistics Agency

POSTED

DEADLINE

Casing and Tubing Supply (6-5/8”)The contract involves the supply of a 6-5/8 inch casing string with specific material grade requirements such as N80 or L80, along with defined thread types and comprehensive inspection reports to ensure compliance with industry standards. The casing must be delivered to meet technical specifications necessary for subsurface operations, with all documentation including certifying inspections provided as part of the delivery. The procurement is classified as a subcontract under NAICS code 332212, indicating manufacturing of metal pipe and pipe fitting, and is associated with the California Department of Conservation, though the agency’s full organizational structure is not detailed. Performance of the contract is centered in Los Angeles, with no specified state or zip code provided for the place of delivery. The solicitation was posted on July 16, 2026, and no set-aside provisions or type of contracting preference are indicated. The contract link directs to a state project database hosted by California, suggesting it is part of a broader public infrastructure or resource management initiative, though the exact project context is not outlined in the provided data. There is no designated point of contact listed, and the agency information remains partially incomplete.

California Conservation, Department of

POSTED

22 days ago

DEADLINE

N/A

AI Contract Overview

The contract seeks the procurement and delivery of cryogenic Dewars designed for the safe storage and transport of liquefied gases including liquid nitrogen and liquid helium, with all units required to meet strict thermal performance and safety standards. These Dewars must ensure minimal boil-off, structural integrity under extreme temperatures, and compliance with industry-specific regulations for handling cryogenic materials during both stationary storage and transit. The work is governed as a subcontract under the National Research Council of Canada, part of the Government of Canada, and performance is expected to occur within the National Capital Region. Interested parties must submit responses by the deadline of May 8, 2026, with the solicitation posted on April 23, 2026. The North American Industry Classification System code 332212 indicates the work falls within the manufacturing of metal canisters and similar containers, aligning with the technical nature of the Dewar production. Although no set-aside criteria or point of contact details are provided, the procurement is open to qualified subcontractors capable of delivering high-quality, certified cryogenic containment systems. The tender opportunity is accessible through the CanadaBuys portal for full terms and submission requirements.

General Info

Procurement of cryogenic Dewars for liquefied gases, meeting thermal, safety standards, NRC Canada.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

332212 - Hand and Edge Tool ManufacturingView NAICS

Place of Performance

National Capital Region (NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedApr 23

subcontract

Response DeadlineMay 8

Deadline has passed

Submission Closed

05/08/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → National Research Council of Canada

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Procurement and delivery of cryogenic Dewars for storage and transport of liquefied gases such as liquid nitrogen and liquid helium, meeting thermal performance and safety standards.