Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, June 24 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Custom Cable Assembly for Vehicle Comms

Active

Federal

Response Deadline07/16/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the manufacture and supply of a custom cable assembly with part number 12106-2353-A006 or an approved equal, specifically designed to interface with new communication systems installed in strike vehicles. The work is part of a subcontract under a total small business set-aside as defined by the Small Business Administration, with the NAICS code 335931 indicating classification under Other Electronic Component Manufacturing. All performance activities are required to be completed at the designated place of performance in Prairie Village, Kansas, with a zip code of 67221. The solicitation was posted on June 18, 2026, and responses are due no later than July 16, 2026, at 2:00 PM Eastern Time. The contracting activity falls under the Department of Defense, specifically through W7M9 Uspfo Activity Ksang 184, and is intended to support critical communication upgrades within military vehicle platforms.

General Info

Custom cable assembly for military vehicles, manufactured in Prairie Village, Kansas, under DoD subcontract.

Agency

Department Of Defense → W7M9 Uspfo Activity Ksang 184View Agency

NAICS

335931 - Current-Carrying Wiring Device Manufacturing View NAICS

Place of Performance

PRAIRIE VLG, KS, 67221, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 18

subcontract

Response DeadlineJul 16

Submission deadline

Response Deadline

07/16/2026, 02:00:00 PM UTCin 25 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W7M9 Uspfo Activity Ksang 184

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W7M9 Uspfo Activity Ksang 184

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of a custom cable assembly (P/N: 12106-2353-A006 or equal) to interface new communication systems in strike vehicles.

Similar Contracts

Power Cables and Ancillary ComponentsMidlands Technical College is seeking qualified suppliers to provide UL and CE-compliant power cables and ancillary components specifically designed for compatibility with medical simulation equipment. The contract is structured as a subcontract, with a North American Industry Classification System code of 335931, indicating focus on other electrical equipment and component manufacturing. The opportunity was posted on June 19, 2026, and responses are due by June 29, 2026, at 6:00 PM Eastern Time. While specific performance locations and contact details are not provided, the requirement emphasizes strict adherence to international safety standards to ensure reliable and safe operation within healthcare training environments. The cables must meet rigorous compliance benchmarks and be fully functional with existing medical simulation systems, with no allowances for non-compliant or generic alternatives.

Midlands Technical College

POSTED

DEADLINE

TerminalThe contract solicits terminal lugs rated for 350 MCM stranded copper with a two-hole NEMA configuration, featuring 1 3/4 inch center-to-center spacing and pre-punched 1/2 inch bolt holes. Each lug has a 3 inch long tongue and an overall length of approximately 6 inches, and must be made exclusively from tinned copper. Approved manufacturers include 3M-INDUS31156, BURNDYYA31-2N, RICHARDSCL15-2N, ASKINCELL350121.75XSH, HOMACL350-N, and NSIINDUNSIL350N. The solicitation is issued by Nashville Electric Service under the Tennessee state agency, with a posting date of June 18, 2026, and a response deadline of June 23, 2026, at 7:00 PM Eastern Time. The place of performance is Nashville, Tennessee, and all inquiries must be directed to Procurement Contact Tiffany Caruthers via email at tcaruthers@nespower.com or phone at 615-747-3593. The full solicitation details and submission portal are accessible through the provided vendor link.

Nashville Electric Service

POSTED

DEADLINE

61--POWER SUPPLYThis contract pertains to the manufacture and delivery of a POWER SUPPLY for the AEGIS WEAPONS SYSTEM, identified by part number 2898032-17 and CAGE code 10001, under a firm fixed-price arrangement. The procurement is governed by strict technical and quality requirements, including compliance with MIL-STD-130 for item marking and MIL-STD-2073 for packaging, and prohibits the use of refurbished materials. The contractor must adhere to all design specifications outlined in the referenced drawing and is restricted from any design, material, or part number changes without prior written approval from the NAVICP-MECH Contracting Officer, with deviations classified under specific codes and justified in detail. All substitutions must be documented with engineering rationale and drawings, and any nonconformances require prior waiver requests evaluated for impact on form, fit, or function, with concurrence from the Government Quality Assurance Representative. The solicitation mandates inspection and acceptance at the manufacturer’s source, with no allowance for downstream inspection or replacement, and requires all proposals from distributors or dealers to include proof of authorization from the original equipment manufacturer, along with correct CAGE codes and part numbers. Electronic submission of invoices and receiving reports via PIEE-WAWF is mandatory, and contractors must register for access to the Electronic Document Access portal under PIEE. The contract emphasizes traceability, quality recordkeeping for at least 365 days after delivery, and compliance with federal security provisions including the Federal Acquisition Supply Chain Security Act and prohibitions on restricted suppliers. Responses are due by July 31, 2026, and all contractual documents are deemed issued upon electronic transmission. Offerors must provide a valid email for communication and specify their CAGE code if multiple are used, while adhering to distribution restrictions and safeguarding requirements for documents marked “NOFORN” or other controlled categories. Only manufacturers or authorized distributors may submit proposals, with additional documentation required for non-manufacturers.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

in about 1 month

CABLE ASSEMBLY,MAINThis contract solicitation, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, seeks qualified contractors to repair two specific military-grade items: the POWER SUPPLY and the CABLE ASSEMBLY,MAIN. The solicitation requires a firm-fixed-price structure with a mandatory 90-day Repair Turnaround Time (RTAT), measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system. Delivery is FOB Origin, and all repairs must comply with military standards, including MIL-STD-130 Rev N for marking and MIL-STD-2073 for packaging. Government Source Inspection is required, and contractors must demonstrate they are authorized distributors of the original equipment manufacturer. Pricing must be justified with comparison to new unit costs and historical data, and any deviation from the required RTAT incurs a monthly price reduction per unit, up to a specified maximum, without limiting the Government’s right to terminate for default. The contract mandates strict compliance with technical documentation, design change controls, and quality assurance protocols, requiring full records of inspection and testing to be retained for 365 days after final delivery. Contractors must adhere to DoD cybersecurity maturity requirements and Buy American provisions, and any changes to parts, materials, or design must be formally approved in writing by the contracting officer. The solicitation includes an option for increased quantity exercisable within 365 days after order receipt, and all proposals must include a detailed quote with unit and total pricing, RTAT, and, if applicable, a breakdown of test-and-evaluate fees for items deemed beyond repair. The award will be bilateral, requiring the contractor’s signed acceptance, and all documentation must reflect proper distribution statements per OPNAVINST 5510.1. Proposals are due by June 23, 2026, and must be submitted through the designated government portal with supporting documentation proving authorization and pricing legitimacy.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

WIRING HARNESSThe contract pertains to the procurement of 30 units of wiring harnesses identified by NSN/Part Number 6150-01-316-1251. This solicitation, designated SPE4A6-26-T-96M5, was issued by the Defense Logistics Agency under the Department of Defense, targeting federal organizations. The solicitation was posted on June 17, 2026, with responses due by June 25, 2026. Details such as specific location for performance, set-aside types, and NAICS codes are not provided in the contract data. The solicitation aims to fulfill a purchase request numbered 7015475598. The contract is accessible through the Defense Logistics Agency’s bidding system, indicating the procurement process is competitive and open for vendor participation.

Defense Logistics Agency

POSTED

DEADLINE