Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Elbow, Pipe to Tube Fitting (NSN 4730015662986)

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the procurement and delivery of a single commercial off-the-shelf Elbow, Pipe to Tube Fitting identified by NSN 4730-01-566-2986, with strict adherence to military packaging, marking, and delivery requirements. The item must fulfill all technical and logistical standards expected for Department of Defense procurement, ensuring compatibility and readiness for military use. The solicitation is categorized as a subcontract, with performance required at the location specified as Baltimore, Maryland, 21222-1621, under the NAICS code 332919, which pertains to other fabricated metal product manufacturing. The opportunity was posted on July 22, 2026, with a firm deadline for responses set for August 3, 2026. Although no solicitation number or set-aside designation is provided, the contract is managed by the Fluid Handling Division under the Department of Defense. Interested parties must respond through the designated DIBBS portal link, ensuring full compliance with all submission guidelines and timelines to be considered for award. The requirement emphasizes reliable, off-the-shelf supply chain sourcing with no customization, making adherence to established military specifications non-negotiable.

General Info

Procure single NSN 4730-01-566-2986 elbow fitting for DoD, deliver to Baltimore by August 3, 2026, per military specs.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

BALTIMORE, MD, 21222-1621, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of one commercial off-the-shelf Elbow, Pipe to Tube fitting (NSN: 4730-01-566-2986) meeting military packaging, marking, and delivery standards.

Similar Contracts

Same NAICS industry code

ELBOW, PIPE TO TUBEThe contract specifies the procurement of one elbow, pipe to tube, identified by NSN 4730-01-584-9782 and McMaster-Carr part number 5463K512, under solicitation SPE7M0-26-T-017K. The item must be delivered within five days of order placement, FOB origin, with no tolerance for quantity variance. Delivery is required to the Sierra Army Depot in Herlong, California, and shipment must be made by the fastest traceable means, excluding parcel post. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, while adhering to DLA’s Packaging Requirements for Procurement, with precedence given to the DLA Master List of Technical and Quality Requirements over any other standard. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by the specification. The contract requires compliance with all DLA technical and quality standards referenced by R or I numbers from the official DLA master list. The unit of issue is TE, and the item is to be packed and palletized as specified, with markings and documentation following DLA and DoD protocols. The original required delivery date is July 21, 2026, and the contract is administered by the Department of Defense’s Maritime Supply Chain ESOc Buys division.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

SWITCH, PRESSUREThe contract is for the procurement of 54 pressure switches with NSN 5930-00-761-7565 under solicitation SPE7M1-26-U-4550, issued as a Total Small Business Set-Aside with a NAICS code of 332919. Delivery is required within 36 days of award, with FOB Origin terms applying, and acceptance occurs at the destination. The contract is structured as an indefinite delivery contract with a guaranteed minimum quantity of 8 units and a maximum value ceiling of $350,000, though unit pricing is not specified in the solicitation. Compliance with stringent military standards is mandatory, including packaging and preservation per MIL-STD-2073-1E and MIL-DTL-28786, labeling and barcoding per MIL-STD-129, and adherence to DLA’s RP001 packaging requirements. Hazardous materials are strictly restricted; mercury and mercury compounds are prohibited except for specific functional applications like batteries, fluorescent lights, sensors, weapon systems, and chemical reagents specified by NAVSEA, and portable devices containing mercury must have shockproof construction and a secondary containment boundary as defined by NAVSEA 5100-003D. Hazard communication requires labeling consistent with 29 CFR 1910.1200 and applicable defense regulations. The contract incorporates numerous FAR and DFARS clauses addressing employment equity, trafficking in persons, eligibility verification, sustainable products, hazardous material identification, electronic payment submissions via WAWF, cybersecurity protection of defense information, prohibition of certain foreign telecommunications equipment, and whistleblower protections. Offerors must be registered in SAM with a valid UEI and CAGE code and affirm their small business status and socioeconomic eligibility, including WOSB, SDVOSB, HUBZone, or SDB classifications. All proposals must be submitted electronically through DIBBS by the August 6, 2026 deadline, and no paper submissions are permitted. The award will be made to a small business capable of meeting all technical, packaging, quality, and regulatory requirements as defined by the DLA Master List of Technical and Quality Requirements, with inspections conducted by the government upon delivery.

MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

ADAPTER, STRAIGHT, PIThe contract pertains to the procurement of one adapter, straight, PI, identified by NSN 4730-01-679-2509, under solicitation SPE7M3-26-T-7582, with a response deadline of August 3, 2026. Delivery is required within 20 days of award. The requirement is governed by a set of standardized DLA packaging and quality mandates, including tailored higher-level quality requirements for both manufacturers and non-manufacturers, configuration change management protocols, and procedures for submitting deviation or waiver requests. The removal of government identification from non-accepted supplies is also mandated. Technical and quality specifications referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless amended. The solicitation is issued by the Department of Defense’s Fluid Handling Division, with performance to occur at FPO, 09591, and William Cain is the primary point of contact for inquiries. The NAICS code 332919 classifies this as a miscellaneous fabricated metal product manufacturing requirement, and the procurement is open to federal suppliers with no set-aside designation.

FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

SWITCH, PRESSUREThis contract specifies the procurement of a pressure switch under solicitation SPE7M8-26-T-5499, with a single line item for 22 units at $22.00 each, totaling $484.00. The item is identified by NSN 5930004388589 and part number 2335-15, and is designated as a critical application item subject to strict source control; only approved vendors listed—Spectrum Associates Inc., Custom Control Sensors LLC, ITT Aerospace Controls LLC, and Bell Textron Inc.—may supply the product, with delivery required within 14 days of award, FOB origin, and inspection and acceptance to occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, MIL-STD-129 labeling, and specific standards such as ASTM D3951 for non-hazardous materials or FED-STD-313 IP025 for hazardous items, with palletization following RP001 guidelines. The product must be manufactured and tested in accordance with limited rights data held exclusively by approved sources, and unapproved vendors must submit a Source Approval Request to qualify for future consideration. The contract enforces compliance with cybersecurity requirements via CMMC Level 2 Self-Assessment and mandates adherence to Covered Defense Information protocols under RD002. Any configuration changes require formal Engineering Change Proposal or Variance requests, and removal of government identification from non-accepted supplies is strictly prohibited. The delivery destination is DLA Distribution Cherry Point in North Carolina, with an original required delivery date of October 3, 2026, though the need ship date is August 18, 2026, indicating an anticipated early fulfillment timeline. No quantity variance is permitted, and all units must conform exactly to the drawing revision E dated January 11, 1983, even if the listed approved sources have not been updated on the current documentation. The contracting office is under the Department of Defense’s Electrical Devices Division, with Dawn MacLean as the primary point of contact, and responses must be submitted by August 3, 2026, under a non-set-aside solicitation categorized under NAICS code 332919.

ELECTRICAL DEVICES DIV

POSTED

about 21 hours ago

DEADLINE

RETAINER, PACKINGThis contract pertains to the procurement of retainer packing items under solicitation SPE7LX-26-U-8935, with a firm quantity of 18 units to be delivered FOB origin within 57 days. The item, identified by NSN 5330-01-419-2351 and part numbers from Johnson Controls Navy Systems, LLC, is classified as a critical application item and must comply with all DLA packaging requirements as defined in RP001 and MIL-STD-2073-1E. Packaging must be in a medium duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, and must adhere to MIL-STD-129 marking standards with no special marking required. Palletization must follow DLA packaging guidelines, and all components must avoid intentional contact with mercury or mercury-containing compounds, except for designated functional uses approved by NAVSEA, with portable devices containing mercury requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, with zero variance allowed in quantity. The contract applies to direct vendor delivery, foreign military sales, and stock shipments, with the unit of issue designated as each. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 21 hours ago

DEADLINE

VALVE, PLUMBING FIXTThe contract involves the procurement of 17 units of a valve for plumbing fixtures, identified by NSN 4510-01-276-1430, under solicitation SPE8E8-26-T-4788, with a response deadline of August 3, 2026, and a delivery requirement of 167 days after award. The acquisition is managed by the DLA Dist San Joaquin under the Department of Defense, with performance taking place in Tracy, California, 95304-5000. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Compliance with DLA packaging standards is mandatory, and government identification must be removed from any non-accepted supplies. A strict prohibition exists against the intentional addition of mercury or mercury-containing compounds to any supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents as designated by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier, in accordance with NAVSEA 5100-003D. The primary point of contact for inquiries is Alexis Selby, reachable via email and phone provided.

DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

ELBOW, TUBEThe contract specifies the procurement of one unit of an elbow tube with NSN 4730015667336 and part number 86050288 under solicitation SPE7M3-26-T-7584, with a required delivery within ten days of order placement. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence over this standard, and packaging must be marked and labeled in accordance with MIL-STD-129. The unit of issue is each, with no variance allowed in quantity, and delivery is FOB origin with inspection and acceptance occurring at the destination. The delivery address is the Dundalk Armory in Baltimore, Maryland, and shipments must be sent by the fastest traceable means, excluding parcel post. Packaging and palletization must adhere to DLA’s RP001 requirements, and all government identification must be removed from non-accepted supplies. The contract includes specific shipping, marking, and project identifiers including RDD 555, PROJ TP 2, and the point of contact is William Cain at the DLA Fluid Handling Division. The required delivery date is July 20, 2026, and the response deadline for the solicitation is August 3, 2026.

FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

ELBOW, PIPE TO TUBEThe contract pertains to the procurement of one elbow fitting, specifically a pipe-to-tube transition component identified by NSN 4730-01-566-2986 and part number 9615396, issued under solicitation SPE7M3-26-T-7585. Delivery is required within ten days of contract award, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination. The quantity is fixed at one unit with no variance permitted, and packaging must strictly comply with ASTM D3951 and MIL-STD-129, while adhering to all DLA Packaging Requirements for Procurement (RP001), including palletization standards. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements, and any substitute materials require prior approval. The item must be shipped via the fastest traceable method, excluding parcel post, to the designated military address in Dundalk, Maryland, with all packaging properly marked and labeled as specified. The contract mandates full compliance with the DLA Master List of Technical and Quality Requirements, which take precedence over general industry standards. The unit of issue is each (EA), and the purchase request number is 7017574204. Shipping instructions include a required delivery date of July 20, 2026, with the shipment referenced under RDD 555 and project code TP 2. The recipient is the W8SC MD ARNG FMS 2 facility at the Dundalk Armory, and the point of contact is William Cain of the Fluid Handling Division, Department of Defense, reachable via provided phone and email. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and is classified under NAICS code 332919. The item is to be delivered for government use only, with designated internal codes for tracking and distribution purposes.

FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

TEE ASSEMBLYThis contract pertains to the procurement of a specialized 0.25 IPS SW x 0.438-20UNF-2B x 0.438-20UNF-2B Tee Assembly, designated as Special Emphasis Level I material due to its critical role in shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must strictly conform to Naval Sea Systems Command Drawing 845-2445109, with mandatory compliance to specific material specifications including MIL-C-24679 Alloy C71500 for the Tee and QQ-N-281 Class A for the Plug. All components require full traceability from raw material through final assembly, with unique heat-lot markings permanently applied and verified against certified test reports. The Contractor must maintain a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, or an acceptable alternative under MIL-I-45208 and MIL-STD-45662, subject to government audit at any time during production. All inspections, tests, and certifications, including hydrostatic testing at 1050 PSI for three minutes without leakage or deformation, visual inspection per T9074-AS-GIB-010/271, and non-destructive testing, must be thoroughly documented with electronic signatures permitted under controlled procedures. Material certification data must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard prior to shipment, with specific routing to N50286 for shipping and N39040 for inspection and acceptance, and notification sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL. No material may be shipped until formal acceptance is received. Requirements for welding and brazing are tightly controlled, mandating prior submission and Navy approval of welding procedure qualifications under S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, including consumable filler metal certification and 72-hour notification to DCMA prior to test welding. Thread lubricants containing molybdenum disulfide are prohibited; only anti-galling compound A-A-59004 is permitted. All traceable materials must undergo 100% inspection for marking leg

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 2 months

PARTS KIT,BALL VALVThis contract pertains to the repair and refurbishment of a ball valve parts kit designated as SPECIAL EMPHASIS material due to its critical role in shipboard systems, where failure could result in catastrophic outcomes including loss of life or vessel. All components must be restored to “like new” or “A” condition under a firm fixed-price model, with mandatory submission of repair, teardown, and beyond-economic-repair pricing. The work is governed by stringent quality assurance protocols requiring ISO-9001 certification, compliance with MIL-STD and SAE standards, and full traceability from raw material through final assembly. Metallic parts, particularly the ball and seats, must meet exacting chemical and mechanical specifications, including SAE AMS-6931 and Torlon 4503/4203/4203L, with certifications that are unqualified, positively stated, and fully traceable to heat or lot numbers. All materials must bear permanent, legible markings that link directly to test reports, and any deviation, waiver, or engineering change requires prior government approval through formal processes. Certification documentation must be submitted via the Wide Area Work Flow system to Portsmouth Naval Shipyard, with inspection and acceptance authority vested in N39040 and shipped material strictly prohibited until formal acceptance is granted. The contractor must maintain complete control over subcontractors, ensure zero-defect lot acceptance, perform 100% inspection on critical documentation and traceability, and comply with Navy-wide procedures for weld qualification, material handling, and configuration control. The contract is a total small business set-aside, utilizes Commercial Asset Visibility, and is designated as a DO-rated order under the Defense Priorities and Allocations System, reflecting its priority status for national defense use. All deliverables must meet the requirements of Naval Sea Systems Command drawing 801-6404739 and incorporate the latest revisions referenced in the ECDS system, with final delivery required within 365 days of contract effective date.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 2 months

48--DIAPHRAGM,VALVE,FLAThe contract pertains to the procurement of a diaphragm, valve, flange component identified by part number N5431795 from Leslie Controls, Inc., under solicitation N0010426QBZ76, issued by the Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS) Mech. The requirement is strictly defined by the specified part number and catalog information, with no accompanying technical drawings or data; compliance must align exactly with the manufacturer’s design, material, and dimensional specifications as outlined in the ordering data. The contract mandates adherence to NAVSUP WSS-MECH Code N94 technical documentation with a defined order of precedence, requiring full use of cited document revisions unless explicit written approval is obtained from the Contracting Officer for deviations. Any non-conformance, including delivery delays or material substitutions, must be formally justified with technical data demonstrating no adverse impact on the part’s quality, form, fit, or function, and must be submitted to the Government Quality Assurance Representative for review. Mercury or mercury-containing compounds are strictly prohibited from contact with the supplied item. The contractor must implement and maintain a government-acceptable inspection system, keeping complete records available for review throughout performance and beyond. Packaging must comply with MIL-PRF-23199 and MIL-DTL-24466 specifications for heat-sealed envelopes if cleanliness controls apply, and fire-retardant materials are no longer required. All packaging must be clearly marked with the item name “CUP, DIAPHRAGM DISK” and accompanied by a Certificate of Compliance per DI-MISC-81356 at the time of delivery, issued separately for each unique contract line item. The offeror must submit pricing valid for 60 days after the closing date, and contractual documents are deemed issued upon electronic or physical transmission. The solicitation includes mandatory compliance with cybersecurity certification, veteran and disability equal opportunity clauses, security prohibitions, small business representations, and the mandatory use of Workflow Pro. Delivery is governed by FOB destination, and all contractual obligations are subject to DoD distribution controls, with information labeled according to six defined distribution statement codes. The first submission of required documentation is due at the end of contract performance, and responses must be submitted by August 21, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

49--ADAPTER,PRESSURE FUThe Government intends to procure ten units of the 49–ADAPTER, PRESSURE FU under a sole-source contract authorized under FAR 6.302-1, with all contractual documents deemed issued upon deposit in the mail, facsimile transmission, or electronic delivery such as email, following Government acceptance of the contractor’s proposal. Delivery terms are FOB origin, and early or incremental shipments are acceptable. The procurement is not subject to FAR Part 12 commercial item policies, though interested parties may still submit information within fifteen days demonstrating their ability to fulfill the requirement with a commercial item. All responsible sources are invited to express interest or submit proposals, quotations, or capability statements within 45 days of notice publication, or 30 days if an existing Basic Ordering Agreement applies. The Government reserves the right to determine whether to proceed with a competitive process based on responses received. Technical specifications and standards referenced in the procurement can be accessed via ASSIST-Online at http://quicksearch.dla.mil/ or ordered through the DODSSP website after registering for an account; alternative access is available via phone or mail to the DLA Document Services office in Philadelphia. The solicitation number is N0038326QPB99, with a response deadline of September 8, 2026, and primary point of contact is Andrew N. Phillips at NAVSUP Weapon Systems Support in Philadelphia, PA.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 2 months

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Hazardous Materials Compliance and DocumentationThe contract titled Hazardous Materials Compliance and Documentation requires the preparation and ongoing maintenance of Safety Data Sheets for supplied hose or packaging products, ensuring full adherence to OSHA and federal hazardous materials regulations. All labeling associated with these materials must also meet current federal compliance standards to guarantee safe handling, storage, and transportation. The work is to be performed in San Diego, California, under the oversight of the Fluid Handling Division within the Department of Defense, with a response deadline of August 3, 2026. This is a subcontract opportunity classified under NAICS code 541620, indicating it involves scientific and technical consulting services related to environmental and safety compliance. Bidders must ensure their documentation processes are accurate, up to date, and fully aligned with regulatory requirements to support the Department of Defense’s operational safety protocols.

Environmental Consulting Services

POSTED

about 21 hours ago

DEADLINE

Packaging, Marking, and Shipping ServicesThe contract requires the provision of comprehensive packaging, marking, and shipping services for nonmetallic hose designated for delivery to a naval vessel in San Diego, with strict adherence to MIL-STD-129 for labeling and MIL-STD-2073-1E for preservation standards to ensure long-term integrity and readiness. All materials must be traceable throughout the freight delivery process, ensuring full accountability from origin to final destination on the vessel. The work must be completed under the specifications of a subcontract agreement, with the North American Industry Classification System code 561910 indicating specialized support activities for transportation. The contract is managed by the Fluid Handling Division of the Department of Defense and is targeted for performance at the San Diego location with a zip code of 92113-3650. Responses are due by August 3, 2026, and the opportunity was posted on July 22, 2026, through the DIBBS platform.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Nonmetallic Hose SupplyThe contract calls for the supply of four units of nonmetallic hose identified by NSN 4720016987813, manufactured to meet all applicable military specifications, packaging, and shipping requirements. The item must comply with federal and defense standards for performance, durability, and material composition to ensure operational readiness in military environments. The solicitation is classified as a subcontract under NAICS code 326220, indicating the work falls within the rubber product manufacturing sector. The contract was posted on July 22, 2026, with a response deadline of August 3, 2026, and is managed by the Fluid Handling Division of the Department of Defense. Performance is required at a location in San Diego with ZIP code 92113-3650. The contract details are accessible through the DIBBS platform, and while no point of contact or set-aside designation is specified, all submissions must adhere strictly to military procurement protocols and delivery timelines to qualify for award.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 21 hours ago

DEADLINE

Domestic and Traceable Freight Shipping (Non-Parcel Post)This contract requires the domestic shipment of defense-related items via palletized, non-parcel post freight services to Baltimore, Maryland, with strict adherence to Defense Logistics Agency and Wide Area WorkFlow compliance standards. All shipments must be fast, fully traceable, and structured to meet the Department of Defense’s logistical protocols, ensuring accountability and security throughout transit. The performance location is specifically designated as 21226-5000 in Baltimore, and the work must be conducted under the NAICS code 484220 for truck transportation, excluding parcel post and standard courier methods. The solicitation is classified as a subcontract with a response deadline of August 3, 2026, and was posted on July 22, 2026. The contracting entity is the Fluid Handling Division under the Department of Defense, which seeks qualified vendors capable of delivering time-sensitive defense materials under DLA and WAWF regulatory frameworks. While no set-aside designation is specified, vendors must be prepared to demonstrate full compliance with federal defense shipping standards, including documentation, tracking, and delivery verification, without reliance on conventional parcel services. All proposals must align with the technical and procedural requirements outlined in the DIBBS system under solicitation number SPE7M426T273Z.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance and Safety Data Sheet (SDS) PreparationThe contract titled Hazardous Materials Compliance and Safety Data Sheet (SDS) Preparation requires the identification and thorough documentation of hazardous components within materials handled by the Fluid Handling Division of the Department of Defense. The successful contractor must ensure full compliance with federal hazard communication standards by preparing accurate, up-to-date Safety Data Sheets that align with regulatory requirements. All work must be performed to support safe handling, storage, and transport of hazardous substances, with a focus on clarity, consistency, and regulatory adherence across all documentation. Performance of this subcontract is specified to occur in Baltimore, Maryland, with a response deadline of August 3, 2026, and the solicitation was posted on July 22, 2026. The contract falls under the NAICS code 541690, which categorizes it under other scientific and technical consulting services. Although no specific set-aside or organization type is indicated, the work is intended for a subcontractor supporting defense-related operations. The contractor must be prepared to meet strict compliance timelines and deliver documentation that meets federal safety protocols without deviation.

Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract entails the packaging, labeling, and barcoding of defense-related items in full compliance with Department of Defense standards, specifically MIL-STD-2073-1E and MIL-STD-129, ensuring all materials meet military-grade requirements for storage, transport, and inventory management. The work must be performed at the designated place of performance in Baltimore, Maryland, with strict adherence to DLA protocols for documentation, traceability, and physical handling of sensitive defense equipment. This subcontract opportunity is open for responses until August 3, 2026, and falls under NAICS code 561910, aligning with other support services for military logistics and supply chain operations. All submissions must address technical specifications for labeling accuracy, barcode symbology, packaging materials, and environmental durability as mandated by federal defense standards.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Windshield Blade Set ManufacturingThe contract calls for the manufacture and delivery of 30 units of windshield blade sets that must fully comply with military specifications, including stringent packaging requirements and hazardous materials handling standards. These blade sets are intended for use in defense-related applications and must meet all performance, durability, and safety benchmarks dictated by military protocols. The work is to be performed under a subcontract arrangement, with the place of performance located in Baltimore, Maryland, and the acquiring agency is the Fluid Handling Division under the Department of Defense. All deliverables are subject to full compliance with applicable federal and military regulations, and nonconformity may result in rejection or penalties. The solicitation was posted on July 22, 2026, with a firm response deadline of August 3, 2026, leaving a narrow window for potential vendors to submit proposals. The NAICS code 336390 identifies the industry as Other Transportation Equipment Manufacturing, underscoring the specialized nature of the product. Interested parties must ensure their submissions address all technical, logistical, and regulatory components outlined in the requirements. The contract does not specify any set-aside provisions, meaning it is open to all qualified contractors regardless of size or status. Proposals must be submitted through the designated government portal for evaluation, and timely compliance with all deadlines and documentation standards is critical for consideration.

Other Motor Vehicle Parts Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Pipe Reducers (NSN: 4730017233918)The contract requires the supply and delivery of six pipe reducers identified by NSN 4730017233918, manufactured and packaged in full compliance with military specifications for labeling, packaging, and hazardous materials handling. The items must be delivered to MCAS Cherry Point, North Carolina, with the zip code 28533-8051 as the specified place of performance. The solicitation falls under the NAICS code 332911, indicating it pertains to other fabricated metal product manufacturing, and is classified as a subcontract opportunity under the Department of Defense’s Fluid Handling Division. The posting date is July 22, 2026, with a response deadline of August 3, 2026, leaving potential vendors a limited window to submit proposals. All contractual obligations are tied to meeting federal defense standards for quality and logistical handling, with no set-aside provisions indicated.

Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

International Logistics and FOB Origin DeliveryThe contract pertains to the coordination of international shipments originating from abroad and delivered to South Korea under FOB Origin terms, meaning the seller’s responsibility ends once the goods are loaded at the point of origin, and all subsequent transportation, insurance, and import costs are borne by the buyer. Central to this agreement is the accurate preparation and management of all necessary export documentation to ensure compliance with international trade regulations and facilitate smooth customs clearance. The work falls under NAICS code 488510, which classifies it as support activities for air transportation, indicating a focus on specialized logistics coordination rather than direct carriage. The contracting entity is the Fluid Handling Division within the Department of Defense, underscoring the sensitive and mission-critical nature of the shipments involved. Subcontracting is the authorized procurement type, and the solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026. Although the specific origin location and destination city within South Korea are not detailed, performance is expected to span international borders with full accountability for export compliance. The absence of set-aside information suggests this opportunity is open to all eligible bidders regardless of business size or classification. No point of contact is listed, and the primary interface for submissions and inquiries is the DIBBS platform via the provided online link, indicating a fully electronic procurement process. Timing and documentation accuracy are critical, as delays or errors in export paperwork could disrupt defense-related supply chains.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance and DocumentationThe contract requires comprehensive identification, labeling, and documentation of hazardous materials to ensure full compliance with Hazard Communication standards and Defense Federal Acquisition Regulation Supplement requirements. All hazardous components must be accurately classified, properly labeled according to global harmonization systems, and supported by complete safety data sheets and accompanying documentation that align with federal defense protocols. The work must be performed in accordance with strict regulatory guidelines to guarantee safety, traceability, and operational readiness across all handling and logistical processes. This subcontract, under NAICS code 541690 and issued by the Fluid Handling Division of the Department of Defense, is open for responses until August 3, 2026. Performance is expected to support military operations and supply chain integrity, with no specific set-aside provisions indicated. The solicitation is accessible through the DIBBS platform, and participants must demonstrate proven experience in hazardous materials management as applied to defense contracting environments, ensuring all deliverables meet the highest standards of regulatory adherence and operational safety.

Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

Military-Compliant Labeling and MarkingThe contract pertains to the application of standardized military labeling and marking requirements in strict accordance with MIL-STD-129, ensuring all packages and containers are properly identified with barcodes, hazard warnings, and other mandated visual indicators. This work is critical for maintaining compliance with Department of Defense logistics and inventory protocols, facilitating seamless tracking, handling, and safety procedures across the supply chain. All labeling must meet exact specifications for legibility, durability, placement, and content to ensure operational readiness and regulatory adherence. The solicitation is issued as a subcontract under the NAICS code 561910, with a response deadline of August 3, 2026, and was posted on July 22, 2026. The requirement is managed by the Fluid Handling Division of the Department of Defense, and while specific performance location details are not provided, the work is expected to support defense logistics operations. The contract does not specify a set-aside status or point of contact, and all proposals must be submitted via the official DIBBS portal listed in the solicitation.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires adherence to MIL-STD-2073-1E for the packaging and preservation of goods to ensure environmental protection throughout shipment and storage, guaranteeing items remain safeguarded against moisture, corrosion, contamination, and physical damage under military logistics conditions. This subcontract is issued under the NAICS code 561910 and is managed by the Fluid Handling Division within the Department of Defense, with a response deadline of August 3, 2026, and a posting date of July 22, 2026. Compliance with the specified military standard is mandatory and must be executed without deviation to meet strict defense logistics requirements, though no specific place of performance or point of contact is provided in the available data.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE