This Government Contract opportunity from Government of Canada was posted on May 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Electrical Resistance Temperature Transmitters

Closed

International

Submission Closed05/22/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # N0010426QEH41

This contract, under solicitation number N00104-26-Q-EH41, is for the manufacture of three High Pressure Test Kits identified by NSN 7H-6685-017081470-X5. The items must be produced in accordance with the IRPOD/TDP and delivered within 180 days after the contract date. Shipments are designated for two locations: DLA Distribution New Cumberland in Pennsylvania and DLA Distribution San Joaquin in Tracy, California. Government source inspection is required for this procurement, and the government has opted not to use FAR Part 12 commercial item policies. The action is intended to be a sole-source negotiation under FAR 6.302, though interested parties may submit proposals within 45 days of the synopsis publication. All technical specifications and standards are available through the DOD Single Stock Point or the ASSIST online portal.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Four Component Net Radiometers I Procurement Services I SOLE SOURCE

Solicitation # oregon-state-university-1295134

Oregon State University is seeking to procure eight four-component net radiometers from Apogee through a sole source contract. The university requires these instruments to measure incoming and outgoing shortwave and longwave radiation to quantify surface energy balance and evaluate ET measurements across network sites. The SN-500 model was selected because it is the only available instrument that meets all critical technical specifications, including native SDI-12 digital output, onboard A/D conversion, individually heated sensing elements, and low power consumption suitable for remote solar operation. These specific features ensure compatibility with existing Campbell Scientific data acquisition systems and 12-V solar-powered field stations without requiring additional hardware or analog channels. The procurement aims to maintain consistency in programming, maintenance, and data comparability across all eight sites. Interested parties may challenge this sole source determination by contacting Cassandra Hurd via email before the response deadline of September 25, 2026.

Oregon State University

POSTED

DEADLINE

Supply of Flow Rate Indicating Meters (P/N 7058-G501)This subcontract involves the procurement of 21 flow rate indicating meters for prime contractors supporting Department of Defense projects under the ASC Commodities Division. The required items must match part number 7058-G501 from Howell Laboratories Inc and adhere to NSN 6680014589470 specifications. All deliverables must comply with Critical Application Item quality standards and FAR 52.223-3 regulations regarding hazardous material identification. The contract is categorized under NAICS code 334519 and specifies delivery of the units FOB Origin. Performance of the contract is centered in Tracy, California. The solicitation was posted on September 18, 2026, with a response deadline of September 23, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Metallic Particle Detector SupplyThis subcontract under the Department of Defense Maritime Supply Chain involves the supply of 184,000 Metallic Particle Detectors, identified by NSN 2995-01-353-4067. The provider is responsible for manufacturing or sourcing components that strictly adhere to the DLA Master List of Technical and Quality Requirements and RQ001 quality standards. Key operational requirements include the management of cure-dated components and the provision of data plate verification to ensure compliance. These units are intended for prime contractors supporting DLA Land and Maritime supply contracts, with the project falling under NAICS code 334519.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

GENERATOR, TACHOMETER

Solicitation # SPE4A5-26-T-420B

Solicitation SPE4A5-26-T-420B is a request for quotations issued by the Defense Logistics Agency for the procurement of five tachometer generators, identified by NSN 6680010178443. The requirement is classified as a critical application item with a need ship date of July 23, 2027. Delivery is set as FOB Origin, with the destination and acceptance point located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E, and prohibits the intentional addition of mercury or mercury-containing compounds. Quality assurance will be managed through destination inspection and sampling methods following MIL-STD-1916 or ASQ H1331. Offerors must comply with the Buy American Act and submit quotes via the DLA Internet Bid Board System. Payment processing is required through the Wide Area Workflow system.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

METER, FLOW RATE INDICA

Solicitation # SPE4A6-26-T-25YT

Solicitation SPE4A6-26-T-25YT is a fixed-price procurement issued by the DLA Aviation ASC Commodities Division for 21 units of a flow rate indicating meter, identified as a critical application item with NSN 6680014589470 and part number 7058-G501 from Howell Laboratories Inc. The delivery requirement is 155 days after order, with terms set as FOB Origin and delivery to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict quality and packaging standards, requiring sampling in accordance with MIL-STD-1916 or ASQ H1331 and marking per MIL-STD-129, specifically using special marking code 05 for delicate instruments. Packaging must follow MIL-STD-2073-1E and RP001, with a total prohibition on the use of mercury or mercury compounds in preservation and packing. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the Berry Amendment.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-26-T-215A

Solicitation SPE4A5-26-T-215A is a fixed-price procurement issued by the Defense Logistics Agency for the acquisition of 28 motional transducer pickups, identified by NSN 6695014828743. The requirement is split into two line items of 14 units each, with delivery terms set as FOB Origin and inspection and acceptance occurring at the destination. Delivery is required within 147 days, with specific ship dates in November 2026 and required delivery dates in January and February 2027. Shipping destinations include DLA Distribution centers in Tracy, California, San Diego, California, and Yokosuka, Japan. The contract mandates strict adherence to quality and packaging standards, including ISO 9001:2015 compliance and sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must follow MIL-PRF-23199 and MIL-STD-2073-1E, with a total prohibition on the use of mercury or mercury compounds in preservation and packing. Technical and quality requirements are further governed by DLA master lists RA001, RP001, and RQ001. Offerors must comply with the Buy American Act, the Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-064B

Solicitation SPE7M0-26-T-064B is a request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of two magnetic contactors under NSN 6110012708606. The requirement is managed under NAICS code 334519 and specifies a delivery timeframe of five days after receipt of order, with an original required delivery date of September 2, 2026. The items are to be delivered FOB Origin to the Government of Israel, Ministry of Defense, in Israel. Inspection and acceptance will also take place at the origin. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, along with DLA packaging requirement RP001. Technical and quality requirements are governed by the DLA Master List, and the removal of government identification from non-accepted supplies is required per RQ011. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The solicitation also incorporates various federal regulations, including the Buy American Act, DFARS cybersecurity reporting standards, and the Hazard Communication Standard for any applicable hazardous materials.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Mobile SLAM LiDAR Scanning Systems

Solicitation # 75D301-26-Q-79246

The Centers for Disease Control and Prevention, through the National Institute for Occupational Safety and Health, is seeking a Firm-Fixed-Price purchase order for two complete handheld or backpack-mounted mobile SLAM LiDAR scanning systems. These systems will be utilized by the Pittsburgh Mining Research Division for 3D mapping and deformation measurements of roof, floor, and rib movement in underground coal mines. The procurement includes the hardware, all necessary software licenses for data processing and export in formats such as E57 and LAS/LAZ, a minimum of 24 hours of virtual instructor-led training for three government personnel, and at least one year of warranty and support. Technical requirements specify a measurement range of 0.5 to 25 meters, a horizontal field of view of at least 360 degrees, a vertical field of view of at least 270 degrees, and a point measurement rate of at least 420,000 points per second. Systems must operate between 0°C and 40°C and function without continuous internet access. Award will be granted to a responsible quoter who is technically acceptable, meets the 60-day delivery requirement to Pittsburgh, Pennsylvania, and provides the lowest evaluated total price. Quotations are due by September 17, 2026, at 10:00 AM ET, and must include a completed minimum requirements compliance checklist and an AI use compliance and risk management plan if artificial intelligence is utilized in the solution.

CDC Office Of Acquisition Services

POSTED

DEADLINE

NSN: 6665-01-415-4957 Sensor Assembly

Solicitation # CM26127005

The Defense Logistics Agency Land and Maritime intends to award a Firm-Fixed-Price Indefinite Delivery/Indefinite Quantity contract for the procurement of Sensor Assemblies, specifically NSN 6665-01-415-4957. This acquisition is a Total Small Business Set-Aside and will feature a five-year ordering period, consisting of a three-year base period and two one-year option periods. The government will evaluate awards based on Best Value, considering factors such as price, past performance, and delivery performance. The item is source controlled, with MSA Safety Sales, LLC as the approved manufacturer for part number N-26105. Any alternate sources must submit a Source Approval Request. The estimated annual demand quantity is 489 units, with a required delivery timeframe of 98 days after receipt of each order. Shipping and inspection are set as FOB Destination. Proposals should be submitted via the DIBBS system or electronically to the designated point of contact.

DLA Land And Maritime

POSTED

DEADLINE

W355B-270105B Laser Geometric Measuring & Bore Alignment System

Solicitation # WS5811557851

This solicitation, issued by the Department of Public Works and Government Services for the Government of Canada, is a reissue that supersedes a previous notice from August 11, 2026. The contract seeks the supply of Laser Geometric Measuring Systems to be utilized at Fleet Maintenance Facility Cape Scott in Nova Scotia. These systems will be used to verify the flatness of gun seats, launcher pads, antenna seats, and mounts, as well as to perform alignments on diesel generators for Arctic and Offshore Patrol Ships. The opportunity is open exclusively to Canadian suppliers and those from applicable trading partners. All submissions must be received by the deadline of 14:00 EDT on September 25, 2026, as late entries will not be accepted. The successful contractor must deliver the equipment by October 31, 2026, which also marks the end of the contract period. Offerors from the previous solicitation may request debriefing sessions regarding the results of the process.

Department of Public Works and Government Services

POSTED

DEADLINE

Eddy Current Probe Supplier (NSN 6635-01-696-4382)This subcontract is for the supply of one Eddy Current Probe, identified by NSN 6635-01-696-4382, to support prime contractors on Department of the Navy NAVSUP WSS projects. The supplier must adhere to strict packaging and marking standards according to MIL-STD-2073-1 and MIL-STD-129. Additionally, the contractor is required to obtain government source approval via the NAVSUP WSS Source Approval Brochure and provide certification of country of origin in compliance with the Buy American-Balance of Payments Program. The opportunity is managed by the Navsup Weapon Systems Support under NAICS code 334519, with the place of performance located in Philadelphia. Interested parties must submit their responses by the deadline of October 19, 2026. The final deliverable consists of the completed, packed, and marked probe delivered to the specified location.

Navsup Weapon Systems Support

POSTED

1 day ago

DEADLINE

in about 1 month

AI Contract Overview

The contract requires the supply of eight electrical resistance temperature transmitters or equivalent devices that must meet strict form, fit, function, quality, and performance standards to support operations at Canadian Forces Bases. The equipment must be fully compatible with existing military infrastructure and reliable under operational conditions across diverse Canadian climates, particularly in British Columbia and Nova Scotia where the devices will be deployed. All units are subject to rigorous technical validation and must satisfy the Department of National Defence’s specifications without deviation. The solicitation is structured as a subcontract under the NAICS code 334519, indicating it pertains to other electronic component manufacturing. The opportunity was posted on May 4, 2026, with a firm deadline for responses set for May 22, 2026, at 7:00 PM. The procurement is managed by the Government of Canada through the Department of National Defence, and while no set-aside provisions are specified, the delivery location and operational context imply an emphasis on domestic compliance and Canadian defence readiness. All bids must fully align with technical expectations and delivery timelines to ensure seamless integration into military systems.

General Info

Supply of eight temperature transmitters meeting military standards for Canadian Forces Bases, Department of National Defence.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

Canada, British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

This scope was carved out of W8482-264853/A .

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 4

subcontract

Response DeadlineMay 22

Deadline has passed

Submission Closed

05/22/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of 8 units of electrical resistance temperature transmitters (or equivalent) meeting form, fit, function, quality, and performance standards for Canadian Forces Bases.