Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Fluid Filter Element (NSN 2910015193768, P/N 1R1807)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement and delivery of a single fluid filter element identified by NSN 2910015193768 and part number 1R1807, must comply fully with military specifications, traceability requirements, and DFARS standards to ensure authenticity, quality, and supply chain integrity. The item falls under the NAICS code 332999 for other fabricated metal product manufacturing and is issued as a subcontract under the Defense Logistics Agency, part of the Department of Defense. All deliverables must meet rigorous defense-grade criteria, including documented provenance and adherence to federal acquisition regulations governing defense contractors. Performance is expected to meet defense logistics standards without specific geographic location outlined, and the action is listed on the DIBBS system with the contract reference SPE7LX26FB880. The solicitation was posted on July 17, 2026, indicating an upcoming or active procurement window for this critical component. No set-aside designation is specified, meaning the contract is open to all eligible vendors capable of meeting the stringent technical and regulatory demands. The urgency and specificity of the requirements reflect the essential nature of this filter element in maintaining operational readiness across military systems.

General Info

Procurement of defense-grade fluid filter NSN 2910015193768 per DFARS and military specs, under DLA subcontract SPE7LX26FB880.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procure and deliver one new fluid filter element compliant with military specifications, traceability requirements, and DFARS standards.

Similar Contracts

Same NAICS industry code

Supplier of Raw Materials / Components for Horn AssemblyThe contract is for the supply of critical metal components—including housings, valves, and diaphragms—required for the assembly of military fluid-operated horns, supporting defense-related operational systems. It is issued as a subcontract under NAICS code 332999 and managed by the ASC Commodities Division within the Department of Defense. The solicitation was publicly posted on July 29, 2026, with responses due by August 28, 2026, providing suppliers a four-week window to submit proposals. Performance is expected to align with military specifications for component durability, precision, and reliability under extreme conditions, though specific delivery locations or technical requirements are not detailed publicly. The contract is open to qualified vendors without designated set-aside preferences, and all submissions must be made through the official DIBBS portal referenced in the posting.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

PANEL, VEHICULAR OPE

Solicitation # SPE7LX-26-U-9072

The contract solicitation SPE7LX-26-U-9072 is issued by the Department of Defense’s Strategic Acquisition Program Directorate for the procurement of 24 vehicular panels with NSN 2510-01-687-9931 under a Total Small Business Set-Aside, with a unit of issue per each (EA) and a total price of $24.00 per unit. Delivery is required within 89 days, FOB origin, with zero variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s Packaging Requirements, including individual packaging with QUP=001, use of designated cushioning materials to prevent damage from vibration, and proper immobilization within unit containers. Cushioning must either be die-cut NA material to protect protrusions or weather-resistant fiberboard (JC) secured with tape to each other, not the part, ensuring panels are positioned flat-side down with reinforced tape securing container flaps. Marking must adhere to MIL-STD-129 on both barrier bag and box with no special codes applied. All packaging and preservation methods are prohibited from containing mercury or mercury compounds. The contract mandates compliance with all technical and quality requirements referenced in the DLA Master List, with revisions controlled based on the solicitation issue or award date, as applicable. The solicitation closed on August 13, 2026, and was posted on July 29, 2026, with primary point of contact Theodore Misiolek.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-10HT

The contract specifies the procurement of one SHIM item with NSN 5365-01-569-5357 and part number BACS40R240B480F under solicitation SPE4A6-26-T-10HT, requiring delivery within 20 days FOB origin to Cannon AFB, New Mexico. All supplies must comply with DLA’s packaging specifications per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required and palletization aligned with RP001. Item Unique Identification is waived per customer request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes default to major. Zero non-conformances are mandated in sample lots unless otherwise stated. The contractor must adhere to all technical and quality requirements referenced from the DLA Master List, including RQ001 for tailored quality provisions and RQ042 for ISO 9001:2015 compliance by both manufacturers and non-manufacturers. Configuration changes require an Engineering Change Proposal or variance request, and government identification must be removed from non-accepted supplies per RQ011. Measuring and test equipment must meet RT001 standards. Delivery is subject to strict quantity precision—no variance permitted—and inspection and acceptance occur at destination. Shipment must use traceable freight methods; parcel post is prohibited. The contract is governed by the DLA Master List revision in effect at the RFP issue date, and all documentation must align with the referenced DFARS and DoD units of issue.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-26-T-290W

The contract is for a nonmetallic hose assembly with a 5/8 inch inner diameter and a length of 62-1/2 inches, identified by NSN 4720-01-186-8681 and part number 28052 from EaglePicher Corp or 9J5197 from Caterpillar Inc. Two units are required to be delivered within ten days under FOB origin terms, with no variance allowed in quantity. The product must comply with all DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with units packed according to the specified Quantity per Unit Pack and palletized as directed. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly permitted by the specification. Delivery is to be made to the military facility at Camp Casey, Dongducheon, South Korea, with shipment details governed by DLAD Procurement Notes C19 and C20. The contract is issued under solicitation SPE7M4-26-T-290W with a required delivery date of July 27, 2026, and the unit of issue is AY. All markings and labeling must reflect the government’s designated point of contact and shipment information, and the item must be shipped without government identification if not accepted.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3730

The contract specifies the procurement of aluminum step ladders with the NSN 5440-00-512-0311 and part number 206106ACS200, requiring a quantity of four units to be delivered within 20 days FOB origin. The ladders must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any general standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 for marking and labeling, with palletization following DLA packaging guidelines. Delivery is directed to a U.S. Air Force prepositioning site in Al Udeid Air Base, Qatar, with shipping instructions referencing specific DLA procedural notes and using the APO AE 09898 address for parcel posting. The unit price is set at $4.00 per unit, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract is issued under solicitation SPE8E5-26-T-3730, with a response deadline of August 10, 2026, and a required delivery date of July 27, 2026, to be fulfilled by approved suppliers including Louisville Ladder Inc, Bauer Corp, and Green Bull Inc. All items must be shipped using TAC 2, labeled as non-mailable, and tracked under RDD 777 with the assigned project code 9GS TP 2.

Defense Logistics Agency

POSTED

DEADLINE

HOSE, NONMETALLIC

Solicitation # SPE7M4-26-T-291A

A 2-1/2 inch nonmetallic hose, 35 feet in length, is being procured under specification MIL-DTL-22240G with a modified weight test requirement of 500 pounds instead of the standard 650 pounds. The product must comply with stringent quality and technical requirements referenced through the DLA Master List and includes controlled packaging, inspection, and acceptance protocols at origin, with shipment following MIL-STD-2073-1E and MIL-STD-129 standards. The item carries a non-extendable 120-month shelf life classified as Type I (Code W) and must be marked accordingly. Ozone-depleting chemicals and mercury or mercury-containing compounds are strictly prohibited unless specifically exempted and approved, and all substitute materials require prior authorization. The contract mandates full and open competition under a Service-Disabled Veteran-Owned Small Business Set-Aside, with adherence to ISO 9001 and higher-level quality requirements including configuration control, engineering change proposals, and zero-defect sampling per MIL-STD-1916 or equivalent. First article testing is required for one unit, and failure to price this line item will result in no separate charge being assumed. Delivery is due within 333 days FOB origin to the Defense Logistics Agency in San Diego, with no variance allowed in quantity. The procurement is governed by clauses addressing inspection, acceptance, packaging, and transportation, and all documentation and marking must align with current DLA and DoD directives.

FLUID HANDLING DIVISION

POSTED

DEADLINE

WINDOW, VEHICULAR

Solicitation # SPE7LX-26-U-9070

The contract specifies the procurement of 121 vehicular windows under NSN 2510-01-617-8631 and Daimler Truck North America P/N 18-57409-003 through a DLA Direct, CONUS delivery arrangement with a delivery window of 89 days FOB origin. The quantity is fixed with no variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, using QUP 001, preservation method 10, and unit container F2, with marking strictly following MIL-STD-129. The windows must be covered with an easily removable protective film to prevent scratches, and cushioning materials must fully immobilize the product against all impact types, including edge, corner, and side drops, with specialized cut-outs for protrusions. Acceptable cushioning includes MIL-PRF-26514 Type I Class 2 Grade B or C flexible polyurethane foam, or equivalent materials that meet shock absorption and creep resistance requirements determined by static stress and density. Package design must satisfy ASTM D4169 Distribution Cycle 18, Assurance Level II, Acceptance Criteria 3, or provide validated military packaging documentation per MIL-STD-2073-1. Special markings must include FRAGILE, ARROW UP, GLASS, and GLASS DO NOT DROP per MIL-STD-129 and ASTM D5445, and containers must support mechanical handling to avoid discrepancies. Mercury and mercury compounds are strictly prohibited in all packaging and preservation components. The solicitation, issued under SPE7LX-26-U-9070, is a total small business set-aside with a response deadline of August 13, 2026, and is governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, with packaging and technical compliance controlled by the revision in effect on the solicitation issue date.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

HOSE ASSEMBLY, METAL

Solicitation # SPE7L4-26-T-5854

The contract is for a single unit of a metal hose assembly with NSN 4720-01-234-3003 and part number 114B355, supplied by STEWART & STEVENSON POWER PRODUCTS LLC. Delivery is required within five days of award, with FOB origin terms, and no variance in quantity is allowed. Inspection and acceptance occur at the origin point, and the item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, containment methods, and marking standards. The product must not contain or come into direct contact with mercury or mercury-containing compounds except for specified functional uses in batteries, lighting, instruments, weapon systems, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The delivery destination is the General Depot of Naval Supplies in Kaohsiung, Taiwan, and shipment must follow DLA transportation guidelines, with the freight forwarder and shipping details governed by DLAD PROC NOTES C19 and C20. The contract is issued under solicitation SPE7L4-26-T-5854, with an original required delivery date of July 31, 2026, and the supplier must adhere to all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

COMPRESSOR UNIT, REC

Solicitation # SPE7M1-26-T-237J

The contract is for the procurement of three reciprocating compressor units, identified by NSN 4310-01-211-4963 and part number CU4963 from NETEX INDUSTRIES, with a total quantity of three units to be delivered within 20 days under FOB destination terms. All deliveries must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and levels, with units packed in single unit containers and marked in accordance with MIL-STD-129 and MIL-STD-130 for government identification. The item is designated as a critical application item, and no variance in quantity is permitted—zero percent plus or minus. Inspection and acceptance occur at the destination, and the contract references the DLA Master List of Technical and Quality Requirements for all technical and quality standards identified by R or I numbers. The delivery destination is APO AP 96278-2069, while the freight shipping address is OSAN AB, South Korea. The solicitation number is SPE7M1-26-T-237J, with a response deadline of August 10, 2026, and an original required delivery date of July 27, 2026. The point of contact is Michael Reese at DLA, and all items must be procured using the DoD authorized unit of issue and comply with applicable transportation and logistics directives including DLAD procedural notes C19 and C20.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SPACER, REACTION, IGNITI

Solicitation # SPE4A7-26-T-600N

The contract pertains to the procurement of four units of SPACER, REACTION, IGNITION with NSN 5365-01-230-3095, under solicitation SPE4A7-26-T-600N, with a response deadline of August 6, 2026, and a required delivery within five days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting disclosure of associated technical data to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to such controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and DLA questionnaire, and have received formal authorization from DLA. Packaging must adhere to DLA standards, inspection and acceptance occur at the manufacturer’s origin, and non-accepted items must have government identification removed. Covered defense information applies, and tailored higher-level quality requirements are enforced for both manufacturers and non-manufacturers. The solicitation is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Christian Roberson as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

SPACER, SPECIAL SHAPED

Solicitation # SPE4A7-26-T-599N

The contract is for 56 special-shaped spacers identified by NSN 5365-01-588-4009 under solicitation SPE4A7-26-T-599N, with a delivery requirement of 171 days after order. The item is classified as a commercial item, allowing the use of a Certificate of Conformance unless restricted by a Quality Assurance Letter of Instruction. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in the sample lot unless otherwise stated. The contractor must comply with DLA packaging requirements and technical quality specifications referenced in the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. The item is subject to export control under ITAR or EAR, restricting technical data sharing with foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data requires JCP certification, completion of DOD export training, and DLA approval. The contractor must also maintain CMMC Level 2 certification through a certified third-party assessment organization. Physical identification of the product must meet specified marking requirements, and covered defense information protocols are enforced. The contract is managed by the Department of Defense through the ASC Supplier Operations AE and AF Division, with performance located in New Cumberland, PA, and primary point of contact is Tamera Greene.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Fixed Canopy Manufacturing and AssemblyThe contract entails the fabrication, assembly, and rigorous quality assurance of 85 fixed canopies identified by NSN 1560-01-708-2761, requiring full compliance with both military specifications and ISO standards to ensure operational readiness and durability under demanding conditions. The work must be performed at the designated place of performance in Chambersburg, Pennsylvania, with all deliverables subject to stringent inspection and certification protocols to meet defense-grade requirements. This is a subcontract opportunity exclusively reserved for SBA-certified Women-Owned Small Businesses under the WOSB Sole Source Program, ensuring eligibility is restricted to businesses that meet the criteria outlined in FAR 19.15. The North American Industry Classification System code 332999 applies, covering other fabricated metal product manufacturing and reflects the specialized nature of the fabrication process. The solicitation was posted on July 29, 2026, and responses are due by August 28, 2026, at 9:00 p.m. Eastern Time, with no formal solicitation number issued. The contracting activity is managed under the Department of Defense through the DLA Aviation office in Huntsville, indicating direct support to military logistics and aviation systems. Although no point of contact is listed, interested parties must submit proposals through the SAM.gov platform using the provided link, and all technical, quality, and delivery requirements must be fully addressed to be considered responsive. The contract requires full adherence to federal acquisition regulations and quality control processes, with performance expectations aligned to the Department of Defense’s standards for sustainment and operational use.

Al DLA Aviation At Huntsville

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

SPECTACLES, INDUSTRI

Solicitation # SPE8E6-26-T-3915

The contract pertains to the procurement of industrial spectacles under NSN 4240-01-729-1324, with a quantity of 10 units, each priced at $10.00, for a total of $100.00. Delivery is required within five days from the date of contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with DLA Master List of Technical and Quality Requirements, specifically RP001 for packaging, MIL-STD-129 for marking and labeling, and either TQ IP025 for hazardous material or ASTM D3951 for non-hazardous items, with DLA requirements taking precedence. The items must be shipped by traceable freight methods, not parcel post, to the designated military address at Camp Lejeune, NC. The contract references multiple DLA directives governing technical standards, source approval documentation, and removal of government identification from non-accepted supplies, with all provisions governed by the active revision of the DLA Master List as of the solicitation or award date. The solicitation number is SPE8E6-26-T-3915, with a response deadline of August 10, 2026, and the required delivery date is July 30, 2026. The point of contact is John Lieb, and the North American Industry Classification System code is 339113 for optical instrument manufacturing.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Solicitation # SPE3SE-26-Q-0411

A non-NSN item with part number 7310GM5022323 is being solicited under purchase request 7017575083 for a quantity of one unit. The solicitation, identified by number SPE3SE-26-Q-0411, was posted on July 29, 2026, with a response deadline of August 5, 2026. This is a federal procurement managed by the Defense Logistics Agency under the Department of Defense. No specific set-aside type or NAICS code is provided. The place of performance and office address details are unspecified, but the procurement is for a U.S.-based operation. All questions regarding the solicitation must be directed via email to DibbsBSM@dla.mil, with further information accessible through the DIBBS website using the solicitation number. The official solicitation document can be retrieved via the provided UI link.

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3732

This contract, issued by the Defense Logistics Agency under solicitation SPE8E5-26-T-3732, requires the delivery of one unit of NSN 3455-01-045-7948, identified as a rotary component, with a strict delivery timeline of 20 days from the award date. The item must be shipped FOB origin, with no variance allowed in quantity, and inspected and accepted at the destination. Packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, and all packaging and labeling must adhere to MIL-STD-129. Palletization must follow the DLA Packaging Requirements for Procurement, and the use of ozone-depleting substances is prohibited. The shipment must be sent via traceable freight methods, explicitly excluding parcel post, to the designated delivery point at Naval Air Station North Island in San Diego, California. Government-specific identifiers and control codes, including the freight address, military freight number, and project codes, are included for internal tracking and compliance. The contract incorporates all applicable technical and quality standards referenced through R and I numbers from the official DLA master list, with revisions controlled based on solicitation and award dates. The required delivery date is January 12, 2026, and the contract is set to expire after response deadlines in August 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

GAGE, SNAP, FIXED

Solicitation # SPE8E5-26-T-3729

The contract pertains to the procurement of two units of a GAGE, SNAP, FIXED item identified by NSN 5220-15-033-5333 and part number 506010051, with a total value of $2.00 per unit and a firm fixed price structure. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 as a baseline, but all DLA Master List of Technical and Quality Requirements take precedence, mandating adherence to MIL-STD-129 for marking and labeling. Palletization must follow DLA Packaging Requirements for Procurement, and traceable freight shipping is required—parcel post is explicitly prohibited. The item is to be delivered to the Marine Corps Systems Command in Quantico, Virginia, with specific shipping and identification codes provided for government use. The contract references technical and quality requirements from the DLA Master List, with revision control tied to the solicitation issuance date. The solicitation number is SPE8E5-26-T-3729, issued by the Defense Logistics Agency under the NAICS code 333515, with a response deadline of August 10, 2026, and a posted date of July 29, 2026. The contract includes a covered defense information clause and requires compliance with source approval documentation and removal of government identification from non-accepted supplies. The point of contact is Khue Nguyen, reachable via email and phone, and the unit of issue is each (EA). The required delivery date is set for January 9, 2026, with a project code and tracking identifiers provided for logistical and financial purposes. Government use fields include specific distribution, fiscal, and administrative codes to ensure proper processing and accountability within the Department of Defense acquisition system.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

INNER TUBE, PNEUMATIC T

Solicitation # SPE7L7-26-T-4493

This contract specifies the procurement of 50 pneumatic tire inner tubes with a straight large bore valve system, identified by NSN 2610-00-051-9610 and part number GP4/16.00-24/TRJ670-02/ON CENT. Each inner tube must include a TR-J670-02 valve stem, TR-AD4 adapter, and TR-SP1000 component, with the valve stem centered. The product must comply with strict environmental standards prohibiting all Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. The item has a non-extendable shelf life of 60 months, classified as Type I, and must be packaged per MIL-STD-2073-1E with each tube partially inflated, folded to avoid sharp creases, and treated with powdered soapstone or talc to prevent sticking. Packaging and marking must adhere to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. The delivery destination is the Vehicle Main Depot at Red Mountain, Cairo, Egypt, under FOB origin terms, with inspection and acceptance occurring at the point of origin. The contracted quantity of 50 units must be delivered within 20 days of order, with no variance allowed in quantity. The freight forwarder is DEG005, DF YOUNG, in Hanover, Maryland, and the contract is issued under solicitation SPE7L7-26-T-4493, with a required delivery date of August 3, 2026. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation or award date.

Tire Manufacturing (except Retreading)

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-284H

The contract is for the procurement of CHIP, AMMONIA with the NSN/Part Number 6550-01-530-9390, under a single-unit purchase request numbered 7017447510. The solicitation was issued by the Defense Logistics Agency under the Department of Defense with the solicitation number SPE2DS-26-T-284H and was posted on July 29, 2026. Respondents must submit their proposals by August 4, 2026, at 5:00 PM, with no set-aside provisions specified for small businesses or other categories. The item is designated for federal use, and the place of performance has not been defined with specific geographic details. All correspondence and submissions must be processed through the official DIBBS platform, accessible via the provided link.

Industrial Gas Manufacturing

POSTED

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-158J

A safety relief valve is being procured under contract SPE7MC-26-T-158J by the Defense Logistics Agency for delivery to the USS BOXER LHD 4 at FPO AP 96661, with a required delivery date of July 27, 2026. The contract specifies two identical items, each priced at $1.00, with no variance allowed in quantity, and delivery must be made FOB destination within 20 days. The valve has a carbon steel body with flanged end connections and must comply with strict environmental and safety standards, including a complete prohibition on ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except where explicitly permitted for functional uses in batteries, instruments, or weapon systems as defined by NAVSEA, with additional containment requirements for portable devices. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization adhering to DLA’s packaging requirements, and all materials must be properly identified using the assigned NSN 4820013387425. The contract references the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications, and the procurement is a total small business set-aside under NAICS code 332911, with submissions directed to DLA and managed via the DIBBS system.

Industrial Valve Manufacturing

POSTED

DEADLINE

LINK, FUSIBLE, FIRE

Solicitation # SPE8E6-26-T-3916

The contract specifies the procurement of 30 units of LINK, FUSIBLE, FIRE with NSN 4210016853524 under solicitation SPE8E6-26-T-3916, requiring delivery within 20 days FOB origin with no variance in quantity. All items must be packaged and marked in strict compliance with DLA packaging requirements, MIL-STD-129, and applicable technical standards, including IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous items, with DLA Master List requirements taking precedence. The product must be shipped via traceable freight, not parcel post, to the designated delivery point at Shaw Air Force Base, South Carolina, with the required shipment reference RDD 777 and project code TP 2. All documentation must align with DLA’s source approval request and government identification removal protocols, and the materials are subject to inspection and acceptance at the destination. The contract includes specific unit of issue, pricing, and compliance directives tied to the DLA Master List of Technical and Quality Requirements, with delivery due no later than July 27, 2026, and response to solicitation required by August 10, 2026.

All Other Miscellaneous Textile Product Mills

POSTED

DEADLINE

BANDAGE KIT, ELASTIC, AB

Solicitation # SPE2DS-26-T-284K

The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for a Bandage Kit, Elastic, AB with NSN 6510-01-532-6656 under solicitation number SPE2DS-26-T-284K. The request is for a single unit and was posted on July 29, 2026, with a response deadline of August 4, 2026. This is a federal procurement action with no specific set-aside designation or NAICS code listed, indicating it is open to all eligible contractors. The place of performance and office address details are not specified, but the contracting activity is managed through the DLA’s procurement system. Interested parties must submit responses prior to the stated deadline via the provided DIBBS portal link to be considered for award.

POSTED

DEADLINE

Solicitation # SPE7L7-26-T-4492

This contract, issued by the Defense Logistics Agency under solicitation SPE7L7-26-T-4492, pertains to the procurement of one power supply unit with NSN 6130-01-523-2469, to be delivered FOB origin within 20 days of contract award. The item is subject to stringent technical and quality requirements defined by the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951. All packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly adhering to government specifications. The supply must not contain intentionally added mercury or mercury-containing compounds except for specific authorized uses such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents as defined by NAVSEA, and any portable devices containing mercury must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with acceptance criteria mandating zero non-conformances unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The contract enforces CMMC Level 2 self-assessment compliance and applies Covered Defense Information protocols. Delivery is directed to USS PORTLAND LPD 27 in San Diego, with inspection and acceptance occurring at the destination. The supplier must use the specified unit of issue and meet all packaging, marking, and transportation requirements as outlined in DLA procedural notes. The purchase request number is 7017574045, and the original required delivery date is July 20, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3725

This solicitation is for 3 pounds of welding rod specified as MIL-R-5031 CL 5 0.062, with a diameter of 1/16 inch and a length of 36 inches, classified as steel corrosion-resisting filler. The item is identified by NSN 3439-00-246-0575 with a unit of issue of 1 pound and a quantity of 3 pounds under purchase request 7017622781. Delivery is required within 5 days of award. The contract is governed by the DLA Master List of Technical and Quality Requirements, which incorporates referenced technical standards identified by R or I numbers. Packaging must comply with DLA packaging requirements, and government identification must be removed from non-accepted supplies per RQ011. This material has no shelf life requirement. The solicitation, issued under number SPE8E5-26-T-3725, was posted on July 29, 2026, with a response deadline of August 10, 2026. It is classified as a fully competitive procurement under a military specification and falls under NAICS code 333992. The procuring agency is the Defense Logistics Agency, part of the Department of Defense, with performance occurring in Tampa, Florida, 33621. Primary point of contact is Ira Hedgepeth, reachable via email and phone. All technical and quality requirements are subject to the DLA Master List version effective as of the solicitation issue date, and this procurement is subject to potential covered defense information regulations.

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE

SUTURE KIT, SURGICAL

Solicitation # SPE2DS-26-T-284G

The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for a SUTURE KIT, SURGICAL with NSN 6515-01-309-3551, requesting a quantity of four units. The solicitation, identified by number SPE2DS-26-T-284G, was posted on July 29, 2026, with responses due by August 4, 2026. This procurement is designated as a federal action and does not specify any set-aside preferences or NAICS codes. The kits are intended for delivery to a U.S.-based performance location, though no specific city or state is provided. All inquiries and submissions must be directed through the DIBBS platform via the provided UI link, and no point of contact information is listed in the solicitation details.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE