Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of General Mechanics Tool Kits (Snap-On Equivalent)

Active

Federal

Response Deadline08/18/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the supply of five mobile, secure, general mechanics hand tool kits that must be equivalent to or exceed the specifications of the Snap-On KTL1022APBO model, including all components detailed in Attachment 1. These kits are intended for use in field maintenance operations and must meet stringent standards for durability, organization, and security. The solicitation is designated as a Small Business Set Aside under the SBA program, meaning only eligible small businesses may submit proposals, and the NAICS code 332215 classifies the requirement under hand and edge tool manufacturing. The opportunity was posted on August 3, 2026, with a firm response deadline of August 18, 2026, at 9:00 PM. The contract is structured as a subcontract and will be performed at a location with a zip code of 73523, though the specific city and state are not provided. The contracting entity is the Department of Defense under the office designation FA4419 97 Conf Cc. Interested parties must submit proposals through the official SAM.gov portal linked in the contract data, and the procurement is focused exclusively on securing high-quality, field-ready tool kits that ensure operational readiness and efficiency.

General Info

Five secure mobile tool kits, Snap-On KTL1022APBO equivalent, for DoD field use, small business set aside, due August 18, 2026.

Agency

Department Of Defense → FA4419 97 Conf CcView Agency

NAICS

332215 - Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) ManufacturingView NAICS

Place of Performance

0, OK, 73523, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 09:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4419 97 Conf Cc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4419 97 Conf Cc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of five mobile, secure, general mechanics hand tool kits equivalent to or exceeding the Snap-On KTL1022APBO model, including all components specified in Attachment 1.

Similar Contracts

Same NAICS industry code

TILT SKILLET BRAISING PANS

Solicitation # IW259261

The Texas Department of Criminal Justice is seeking quotes for the procurement of tilt skillet braising pans under solicitation number IW259261, with the request posted on August 4, 2026, and responses due by August 19, 2026, at 9:00 PM Central Time. The contract is issued under the state and local government (SLED) category and is intended for use within Texas correctional facilities, with performance occurring across the state. The procurement is managed by Donna Gardner, the primary point of contact, who can be reached via email at donna.gardner@tdcj.texas.gov or by phone at 936-437-3859. This solicitation does not specify a NAICS code or set-aside designation, and all bids must be submitted through the Texas SmartBuy portal accessible via the provided URL.

Texas Department of Criminal Justice

POSTED

about 11 hours ago

DEADLINE

Precision Hand Tap Supply – 1/2" UNC Thread, Type 1001

Nashville Electric Service

POSTED

about 22 hours ago

DEADLINE

Fire Extinguisher Supply and ReplacementThe contract requires the supply and delivery of NFPA-compliant fire extinguishers that are fully charged and ready for immediate use, specifically to replace units at the Excelsior Springs Job Corps Center that have been used, partially discharged, or failed inspection. All extinguishers must meet current National Fire Protection Association standards and be installed or substituted in accordance with facility safety protocols. The work is classified as a subcontract under a Small Business set-aside, open to eligible categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The North American Industry Classification System code is 332215, indicating the scope involves the manufacturing of fire extinguishers and related safety equipment. The opportunity was posted on August 4, 2026, with responses due by August 14, 2026, and the work will be performed at the Excelsior Springs Job Corps Center, though exact location details are not specified in the data. The contract is managed by ETR/Excelsior Springs Job Corps, and interested parties must respond through the official SBA opportunity portal.

ETR/Excelsior Springs Job Corps

POSTED

about 23 hours ago

DEADLINE

Metal Hose Assembly SupplyThe contract entails the supply of metal hose assemblies identified by NSN 4720015172223, with full responsibility for proper packaging, labeling, and delivery to Huntsville, Alabama, no later than July 31, 2026. The work falls under the NAICS code 332215, indicating manufacturing of metal hose and piping components, and is structured as a subcontract under the Department of Defense’s Maritime Supply Chain ESOC Buys office. All deliverables must meet quality and compliance standards tied to military specifications, and the place of performance is firmly established at the zip code 35805-6715 in Huntsville. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, leaving a limited window for interested parties to submit proposals. The contract is not subject to any set-aside classification and is exclusively for fulfillment of a defense supply requirement.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Emergency Rescue Bar Supply and ManufacturingThe contract involves the manufacture and supply of 2,100 Emergency Rescue Bars tailored to military-industrial specifications, with an initial baseline order and the potential for additional requirements under an Indefinite-Delivery, Indefinite-Quantity structure, up to a total value of $350,000. All work must comply with defense logistics standards and ensure full adherence to quality, reliability, and performance criteria demanded by military applications. The procurement is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with NAICS code 332215 categorizing it under Other Fabricated Metal Product Manufacturing. The solicitation was posted on August 3, 2026, with responses required by August 18, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. Performance is expected to meet stringent defense supply chain protocols, though the specific place of performance and point of contact details are not provided.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Duty Accessories and RestraintsThe contract is for the supply of duty accessories and restraints including handcuffs, batons, flashlights, radio holsters, and other small accessories required for deputy gear kits under USMS-0015. It is structured as a subcontract with a Small Business Set Aside designation, meaning only qualifying small businesses are eligible to bid, and the NAICS code 332215 applies to the manufacturing of metal forgings and stampings, indicating the nature of the products being procured. The opportunity was posted on August 3, 2026, with a response deadline of August 10, 2026, at 5:00 p.m. Eastern Time. Performance of this contract will be centered in Salt Lake City, Utah, with a zip code of 84101, specifying the primary location for delivery and fulfillment. The contracting entity is the U.S. Marshals Service under the Department of Justice, and while specific contact information is not provided, the procurement is accessible through the SAM.gov portal. The items to be supplied are essential operational equipment for federal deputies, and the contract ensures standardized, reliable gear is available to support law enforcement duties across the agency’s jurisdiction.

Department Of Justice US Marshal Service

POSTED

DEADLINE

Elevator Door Operator and Safety Device InstallationThe contract involves the comprehensive replacement of elevator door operators, sensors, interlocks, and safety edges at Schofield Barracks under the Department of Defense. This work requires the installation of new hardware that meets safety and operational standards, followed by thorough testing and seamless integration with existing building control systems to ensure proper functionality and regulatory compliance. All components must be properly calibrated and verified to work in unison, maintaining the highest levels of safety and reliability for elevator use in a military facility. The solicitation is classified as a subcontract with a NAICS code of 332215, indicating it pertains to architectural and structural metals manufacturing, and is open for responses until August 8, 2026. The opportunity was posted on August 3, 2026, and performance is specifically tied to the Schofield Barracks location. Contractors must be prepared to execute the work in accordance with federal and military safety protocols, with no specific set-aside provisions listed, meaning eligible entities from any size classification may respond. The project emphasizes precision installation and system-wide coordination, underscoring the critical nature of elevator safety in an active defense installation.

0413 Aq Hq Rco-Hi

POSTED

DEADLINE

Cable Reel Supply (NSN 8130-00-174-0812)The contract entails the supply of military-specification cable reels identified by NSN 8130-00-174-0812, with full compliance required to all applicable U.S. Department of Defense standards for packaging, labeling, and construction. The equipment must adhere strictly to military specifications to ensure interoperability and reliability in operational environments, and all units must be packaged and marked in accordance with DLA guidelines. The performance location is specified as Port Hueneme, California, with the delivery and fulfillment obligations tied to this geographic requirement. The solicitation, classified as a subcontract, falls under the NAICS code 332215 for other fabricated metal product manufacturing and is managed by the Department of Defense under the Construction & Equipment Containers organization. Responses are due by August 13, 2026, and the opportunity was posted on August 2, 2026, with bidders expected to align their proposals with the technical and logistical demands of a defense supply chain.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Supply of Specialized Components or Raw MaterialsThe contract seeks the supply of precision-machined parts, seals, springs, or high-grade alloys specifically for use in safety relief valve assemblies, with all components required to meet MIL-SPEC certification and provide full traceability from raw material to finished part. The deliverables must adhere to stringent military standards ensuring reliability, durability, and performance under critical conditions, and the contractor must maintain complete documentation to verify compliance and origin. This is a subcontract opportunity designated as a Total Small Business Set-Aside under the Small Business Administration, with the NAICS code 332215 indicating classification within the forging and stamping industry. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with performance expected to be carried out at Tracy, California, 95304-5000. The awarding agency is the DLA Dist San Joaquin, operating under the Department of Defense, and the contract is accessed through the DIBBS platform. Only small businesses are eligible to bid, and proposers must demonstrate the capability to meet technical specifications, quality controls, and documentation requirements tied to defense applications. The requirement underscores a critical need for certified components in safety-critical systems where failure is not an option.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of Retaining Bands (Commercial Item)The contract involves the procurement and delivery of commercial off-the-shelf retaining bands under individual delivery orders, with all items required to meet federal packaging, labeling, and hazardous materials standards. This is a subcontract classified as a total small business set-aside under the Small Business Administration guidelines, ensuring only small businesses are eligible to respond. The North American Industry Classification System code 332215 designates the nature of the work to metal forging and stamping, indicating the manufacturing process involved in producing the retaining bands. The contract was posted on August 2, 2026, with responses due by August 17, 2026, and is managed by the Land Supply Chain office under the Department of Defense, though no specific place of performance or point of contact details are provided. All deliveries will be governed by the terms of individual delivery orders issued under this master contract framework.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Cabinet Key Supply (NSN 2090-00-904-6699)The contract requires the supply of 63 cabinet keys identified by NSN 2090-00-904-6699, with strict adherence to technical specifications including dimensions for the hinge fast-type pin and bulkhead clip designated as HPC-511. These keys must meet exacting manufacturing and dimensional standards to ensure compatibility and functionality within authorized military equipment. The submission deadline is August 13, 2026, and the solicitation was posted on August 2, 2026, under a subcontract type with no set-aside classification. The work is performance-based at Tracy, California, with a zip code of 95304-5000, and falls under NAICS code 332215, which pertains to locksmith and safe manufacturing. The agency responsible is the Fluid Handling Division within the Department of Defense, though no point of contact is listed, and all inquiries should reference the provided DIBBS portal link for further details.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Self-Locking Nuts Supply (NSN 5310015975820)The contract requires the supply of 1,000 self-locking nuts identified by NSN 5310015975820, all of which must meet mandatory military specifications for packaging, marking, and hazardous materials documentation to ensure compliance with defense logistics standards. The solicitation is issued under a subcontract type with a NAICS code of 332215, indicating the work involves threaded fastener manufacturing, and the performance location is designated as Spanish Fork, Utah, with a ZIP code of 84660-0000. The offering was posted on August 2, 2026, and all responses must be submitted by August 10, 2026, at 17:00 UTC. The contracting activity is managed by the ASC Commodities Division under the Department of Defense, and full participation requires adherence to all technical and regulatory requirements outlined in the military standards.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4419 97 Conf Cc

Same awarding agency

60" Concrete Saw & Diamond Blade

Solicitation # FA441926Q0029

The 97th Contracting Squadron at Altus Air Force Base, Oklahoma, intends to issue a Request for Quote for a heavy-duty walk-behind 60-inch concrete saw equipped with a diamond blade capable of a 25-inch cutting depth to support full-depth rigid pavement repairs on military airfields including runways, taxiways, and aprons. The solicitation is designated as a Small Business Set Aside - Total under NAICS code 333991 and is identified by solicitation number FA441926Q0029. Although the solicitation is posted, no funds are currently available for this effort, and no award will be made until funding is secured; the government reserves the right to cancel the solicitation at any time without obligation to reimburse offerors for any incurred costs. All submissions must be made through the SAM.gov website, and contractors must be registered in the System for Award Management with a Valid Unique Entity ID prior to proposal submission. Failure to register will render an offeror ineligible for award. The response deadline is August 19, 2026, at 5:30 PM CST. Questions must be submitted in writing or via email to Phillip Chambers or Scott Swain no later than August 12, 2026, at 4:00 PM CST. The place of performance is Altus, Oklahoma.

Power-Driven Handtool Manufacturing

POSTED

about 15 hours ago

DEADLINE

97 LRS Vehicle Maintenance Tool Kits

Solicitation # FA441926Q0046

The 97th Logistics Readiness Squadron at Altus Air Force Base is seeking qualified small businesses to supply five comprehensive, mobile, and secure general mechanics hand tool kits that meet or exceed the functionality of the Snap-On KTL1022APBO model, as detailed in Attachment 1. These kits are essential for maintaining a fleet of 372 vehicles and associated equipment, with the goal of improving technician efficiency, ergonomics, and overall fleet readiness by addressing current operational deficiencies. The solicitation is a Small Business Set Aside under NAICS code 332510, and only contractors registered in the System for Award Management with a Unique Entity ID are eligible to respond. All submissions must be made electronically via SAM.gov; no paper copies will be provided. Proposals are due by August 18, 2026, with questions to be submitted via email to Jarrod Ford or Scott Swain no later than August 10, 2026. No funds are currently available, and the Government reserves the right to cancel the solicitation at any time without obligation to reimburse offerors for any costs incurred.

Hardware Manufacturing

POSTED

DEADLINE

KC-46 Thrust Reverser Plug Set

Solicitation # FA4419-26-Q-0015

The 97th Contracting Squadron at Altus Air Force Base, Oklahoma, is soliciting quotes for 12 LMC18M87 Thrust Reverse Plug Sets, each designed for the PW4000 engine on KC-46 aircraft, under solicitation FA4419-26-Q-0015. This acquisition is a 100% Small Business Set Aside under NAICS code 336411, exclusively available to registered small businesses, and requires all offerors to maintain active registration in the System for Award Management (SAM) with a valid Unique Entity ID (UEI) to be eligible for award. The solicitation is structured as a combined synopsis and request for quote using commercial item procedures under FAR Subpart 12.6, and while funds are not currently available, any awarded contract would be firm-fixed-price with delivery to Altus AFB under FOB destination terms. The evaluation process will follow a lowest price technically acceptable (LPTA) methodology, where technical acceptability is determined by binary assessment—acceptable or unacceptable—based on adherence to specified salient characteristics, primarily the two-piece semi-circle configuration of the plug sets, with price being the sole determining factor among technically acceptable offers. All submissions must be delivered electronically by the deadline of August 14, 2026, at 2100 CST to the designated point of contact, and must include a completed pricing schedule and technical documentation that clearly demonstrates compliance without merely restating requirements. Contractors must comply with a comprehensive set of federal clauses and statutory requirements, including restrictions on procuring goods or services linked to the Xinjiang Uyghur Autonomous Region, prohibitions on certain defense telecommunications equipment as outlined in Section 889 of the NDAA, and mandatory reporting of executive compensation and subcontract awards. Invoicing and payment must be conducted exclusively via the Wide Area Workflow (WAWF) system using specified DoDAAC codes for routing, and all deliverables are subject to government inspection and acceptance at the destination. Compliance with representations regarding child labor, trafficking in persons, convict labor, and whistleblower protections is required, and offerors must affirmatively disclose any use of equipment or services linked to covered entities under federal sanctions. No packaging, preservation, or marking specifications are provided beyond the requirement for conforming commercial items, and no detailed delivery timeline or pricing data is available in the solicitation documents, though attachments outline evaluation factors, clauses, instructions, and clarifications

Aircraft Manufacturing

POSTED

DEADLINE

Consumables and Spare Parts SupplyThe contract entails the recurring supply of consumables and spare parts specifically designed for use with the OptiFlash and Pensky-Martens flash point testers located at Altus Air Force Base, including critical components such as test cups, seals, and ignition systems. All items must be fully compatible with the designated testing equipment to ensure accurate and reliable operation in military testing environments. The procurement is structured as a subcontract under a Small Business Set Aside designation, specifically reserved for total small business participation, and is classified under NAICS code 423420 for industrial supplies and services. Offers must be submitted by August 6, 2026, with the opportunity posted on July 30, 2026, and performance is expected to occur at the facility with the ZIP code 73521. The contracting activity falls under the Department of Defense through the FA4419 97 Conf Cc office, and the work is subject to federal acquisition regulations applicable to defense subcontracting.

Office Equipment Merchant Wholesalers

POSTED

DEADLINE

Long-Term Maintenance and Repair SupportThe contract requires ongoing maintenance, troubleshooting, and repair services for a flash point tester at Altus Air Force Base, ensuring continuous operational readiness throughout the equipment’s lifecycle. Services must be performed to meet military standards, with all work focused on preserving accuracy, safety, and reliability of the tester under demanding environmental and usage conditions. The contractor is expected to respond promptly to failures, conduct preventive maintenance, and provide documentation of all repairs and service activities. This is a small business set-aside subcontract under NAICS code 811212, indicating it is reserved for small businesses to promote competition and economic opportunity within the defense supply chain. The solicitation was posted on July 30, 2026, with a response deadline of August 6, 2026, and performance is to occur at the facility in Altus, Oklahoma, ZIP 73521. The contracting activity is managed by the Department of Defense through agency FA4419 97 Conf Cc, emphasizing compliance with federal procurement regulations and military operational needs.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Technical Installation and Calibration ServicesThe contract calls for on-site installation, calibration, and operational checkout of a flash point tester at Altus Air Force Base, with a zip code of 73521. The services include ensuring the equipment is properly set up, accurately calibrated, and fully functional in its intended environment. Additionally, the contractor is expected to provide training to government personnel to ensure competent and safe operation of the device. This is a subcontract classified as a Small Business Set Aside under the NAICS code 541380, indicating the work is reserved for small businesses. The solicitation was posted on July 30, 2026, with a response deadline of August 6, 2026, and is managed by the Department of Defense under the agency designation FA4419 97 Conf Cc. The place of performance is fixed at the specified base location, and all activities must be completed in accordance with federal contracting requirements for small business participation.

Testing Laboratories and Services

POSTED

DEADLINE

Supply of Pensky-Martens Flash Point TesterThe contract seeks the procurement and delivery of one fully functional Pensky-Martens closed-cup flash point tester specifically for fuels analysis at Altus Air Force Base, with an emphasis on ensuring the equipment meets all operational and safety standards for military fuel testing. The device must be delivered in complete working condition, accompanied by comprehensive technical documentation and installation support to enable seamless integration into existing laboratory workflows. The requirement is designated as a Small Business Set Aside under the NAICS code 423490, indicating it is reserved for small business concerns, and the solicitation is structured as a subcontract. The place of performance is identified with a zip code of 73521, corresponding to Altus AFB in Oklahoma, and all deliverables must be completed by the response deadline of August 6, 2026. The contracting activity falls under the Department of Defense, specifically the FA4419 97 Conf Cc office, and the acquisition is open for proposals with a submission window closing at 5:00 p.m. Eastern Time on the deadline date.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Altus AFB - Flashpoint Tester

Solicitation # FA441926Q0047

The 97th Contracting Squadron at Altus Air Force Base, Oklahoma, intends to issue a Request for Quote for the acquisition of a Pensky Martens Flashpoint Tester, with the preferred product being the Herzog OptiFlash® model that meets the salient characteristics detailed in Attachment 1; however, any equivalent product satisfying those same technical specifications will be considered. This solicitation is a 100% Small Business Set Aside under NAICS code 334516, and only registered small businesses are eligible to respond. All prospective offerors must be currently registered in the System for Award Management (SAM) with an active UEI number prior to submitting a quote, as failure to register will result in automatic disqualification. While funds are not yet available and no award will be made until they are, the government retains the right to cancel the solicitation at any time without obligation to reimburse offerors for associated costs. To maintain warranty validity, vendors must provide documentation confirming their status as authorized distributors. Questions must be submitted via email to 2nd Lt Jacob Funderburg or Kacie Halpain no later than August 4, 2026, at 11:00 AM CDT, and responses are due by August 6, 2026, at 5:00 PM CDT.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Target Like Metal Object (TLMO) Adornments

Solicitation # FA441926Q0044

The contract seeks the manufacturing and shipment of nine low-definition, scale-sized Target Like Metal Object (TLMO) adornments, intended for use by the Department of Defense. The solicitation, numbered FA441926Q0044, is a total small business set-aside under NAICS code 332999, restricted to small business concerns, with responses due by July 29, 2026. Although the posting date is July 15, 2026, no funds are currently available for this effort, and no award will be made until funding is appropriated. The government retains full discretion to cancel the solicitation at any time before or after the deadline without any obligation to reimburse offerors for incurred costs. The performance location is in Fort Smith, Arkansas, with primary and secondary points of contact based at Altus Air Force Base, Oklahoma, for inquiries and coordination related to the procurement.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 13 hours

Supply of Trane HVAC Condenser Coils (Model COL27512 and COL27514)The contract involves the procurement and delivery of Trane-branded HVAC condenser coils identified by part numbers COL27512 and COL27514, specifically for use under federal procurement guidelines that mandate compliance with Buy American requirements and applicable environmental restrictions. These components are essential for maintaining operational HVAC systems within Department of Defense facilities and must meet all regulatory standards for domestic content and environmental safety. The solicitation is structured as a subcontract under a Small Business Set Aside designation, ensuring eligibility and preference for small businesses as defined by the SBA, with the NAICS code 333415 indicating classification within the HVAC equipment manufacturing sector. The contract was posted on July 28, 2026, with a mandatory response deadline of August 12, 2026, at 9:30 PM Eastern Time. Performance is required to be completed at Altus, Oklahoma, with ZIP code 73521 designated as the place of performance. The contracting agency is listed as FA4419 97 Conf Cc under the Department of Defense, though no specific point of contact or office address details are provided. Interested parties must adhere strictly to federal compliance standards and submit proposals within the stipulated timeline to be considered for award.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

HVAC Condenser Coils

Solicitation # FA441926Q0048

The 97th Contracting Squadron at Altus Air Force Base, Oklahoma, is soliciting quotes for Trane HVAC Condenser Coils, specifically models COL27512 and COL27514, under solicitation number FA441926Q0048. This acquisition is classified under NAICS code 333415 and is a 100% Small Business Set Aside, meaning only certified small businesses are eligible to bid. All prospective contractors must be currently registered in the System for Award Management (SAM) and must possess a DUNS number prior to submitting their quotes; failure to complete this registration will disqualify a firm from consideration. The response deadline is 1630 CST on 12 August 2026, with questions regarding the RFQ to be submitted via email to the designated point of contacts, A1C Phillip Chambers or Scott Swain, by the same deadline. Performance of the contract will occur at Altus Air Force Base, Oklahoma, with a ZIP code of 73521. Interested parties are encouraged to register in SAM immediately to ensure timely eligibility and avoid delays in award.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Warranty and Maintenance SupportThe contract provides post-delivery warranty coverage and technical support for a handheld X-ray imager, encompassing repairs, replacements, and remote troubleshooting services to ensure continued operational readiness. This support is essential for maintaining device functionality and minimizing downtime in field applications, particularly in mission-critical environments. The scope is defined under a subcontract for a Total Small Business Set-Aside, indicating that only small businesses qualifying under SBA guidelines are eligible to bid, reinforcing the government’s commitment to small business participation. The solicitation was posted on July 23, 2026, with a response deadline set for August 6, 2026, and is managed by the Department of Defense under the agency designation FA4419 97 Conf Cc. The North American Industry Classification System code 811212 categorizes the work under repair and maintenance services for medical, dental, and hospital equipment. Performance of the contract is designated to take place in Fort Smith, Arkansas, with a ZIP code of 72903, though no specific point of contact or additional address details are provided. The work is anticipated to support defense-related operations requiring reliable and responsive technical assistance for portable diagnostic imaging equipment.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE