Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of High-Grade Stainless Steel Plate/Sheet

Active

State & Local

Response Deadline09/30/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of high-grade stainless steel plate and sheet for prime contractors working on North Carolina State University research projects. The scope of work includes sourcing and delivering materials that meet specific grade and thickness requirements necessary for vacuum-rated pressure vessels. To ensure full compliance with ASME and research standards, the provider must supply Mill Test Reports along with the certified materials delivered to the fabricator. The opportunity was posted on September 15, 2026, with a response deadline of September 30, 2026. Classified under NAICS code 423440, the contract is managed by North Carolina State University. Interested parties can find further details through the North Carolina electronic vendor portal.

General Info

Supply of high-grade stainless steel for NC State University research pressure vessels.

Agency

North Carolina State UniversityView Agency

NAICS

423440 - Other Commercial Equipment Merchant WholesalersView NAICS

Place of Performance

NC, USA

Set-Aside

NONE

Documents

This scope was carved out of 63-ARM1202926.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

1,000-Gal Stainless Steel Vacuum Tanks

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 30

Submission deadline

Response Deadline

09/30/2026, 10:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNorth Carolina State University

ContactsNo contacts available

OfficeN/A

Organization / Agency

North Carolina State University

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies high-grade stainless steel plate and sheet for prime contractors on North Carolina State University research projects. Sources and delivers stainless steel meeting specific grade and thickness requirements for vacuum-rated pressure vessels. Provides Mill Test Reports (MTRs) to ensure compliance with ASME and research standards. Delivers certified stainless steel materials to the fabricator.

Similar Contracts

Same NAICS industry code

Supply of Cold Rolled Steel Bars (1018 Carbon Steel)This subcontract through the Department of Defense involves the supply of precision-cut, cold-rolled 1018 carbon steel flat square bars for prime contractors working on DLA Troop Support Construction and Equipment projects. The required steel must be 2.000 inches thick and 4.000 inches wide, provided in whole foot lengths of 10, 11, or 12 feet, and must adhere to a weight standard of 27.20 LB/FT. The contract is managed by the agency in Warner Robins and the place of performance is located at Robins Air Force Base. All deliverables must comply with specific DLA shipping and invoicing requirements. The response deadline for this opportunity is September 28, 2026.

POSTED

about 11 hours ago

DEADLINE

Supply of 304 Stainless Steel Round BarsThis subcontract involves the supply of cold-drawn or rolled 304 grade stainless steel round bars for prime contractors operating at the DDSP New Cumberland Facility. The requirement specifies 0.375 inch diameter bars provided in lengths of 8 to 16 feet, totaling 241 feet of material. The contractor is responsible for delivering the physical metal bars along with a mandatory Certificate of Quality Compliance, also known as Mill-Material Certification, for every shipment. This procurement is managed under NAICS code 423440 for the Department of Defense, with performance taking place in New Cumberland.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

Mechanical Food Freezer SupplyThis subcontract involves the supply of two mechanical food freezers for prime contractors supporting the Department of Defense, specifically within the DLA Troop Support Subsistence FSE Supply Chain. The provider must source units that adhere to NSN 411004257993 specifications and ensure all equipment is packaged according to ASTM D3951 standards. The contractor is responsible for managing FOB Destination shipping to deliver two completed and accepted units. The project is categorized under NAICS code 423440 and is designated as a Total Small Business Set-Aside under FAR 19.5. Performance for this contract is located in Columbia, South Carolina. The solicitation was posted on September 15, 2026, with a response deadline of September 21, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Fastener Supply and LogisticsThis HUBZone set-aside subcontract with the Department of Defense ASC Commodities Division involves the supply and logistics of hexagon head cap screws for prime contractors supporting DLA supply contracts. The provider is responsible for sourcing parts that adhere to the DLA Master List of Tech requirements and ensuring manufacturer compliance with MIL-STD-129 marking standards. The scope of work includes managing the entire shipment process from origin to destination within a 121-day window, utilizing specialized warehouse and logistics management systems. Performance for this contract is centered at Hill AFB, zip code 84056-5734, under NAICS code 423440.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Specialized Steel Material SupplyThis subcontract, managed by the Department of Defense under the ASC Supplier Oper OEM Division, involves the procurement of high-grade alloy or carbon steel bar stock. The supplier is responsible for sourcing and delivering materials that meet specific metallurgical requirements for NSN 3040011946852 and P/N 3505036-1-1, ensuring all strength and durability standards are verified through Mill Test Reports and material certifications. The project falls under NAICS code 423440 and requires delivery of the raw steel stock to a fabricator located in Tracy, California. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Supply of Deep Fat Fryer (Star Manufacturing)This subcontract involves the procurement and delivery of one Star Manufacturing International model 150F-MN 440V deep fat fryer, identified by NSN 7310-01-465-9914, for prime contractors supporting DLA supply contracts. The equipment must be delivered to the designated location in FPO 09570 and must strictly adhere to DLA quality requirement RA001 and identification marking standards per MIL-STD-130N. Managed by the Department of Defense under the Subsistence FSE Supply Chain, the contract falls under NAICS code 423440. The solicitation was posted on September 15, 2026, with a response deadline of September 21, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Specialized Metal Stock SupplyThis subcontract for Specialized Metal Stock Supply supports prime contractors fulfilling DLA supply contracts through the provision of certified metal plates and sheets. The supplier is responsible for sourcing and delivering raw metal stock that adheres to the material specifications outlined in the RA001 technical requirements, including the submission of mill test reports to verify metal grade and strength compliance. Managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 423440. Performance of the contract takes place at Robins Air Force Base, and the response deadline for the solicitation is September 23, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Appliance Supply (Lease/Provision)This subcontract agreement involves the supply of 1,632 new combination microwave and refrigerator units, specifically Model 3.1MF7-7B1X, for University of Houston Student Housing and Residential Life projects. The equipment is to be delivered to three separate residence halls under a lease agreement structure to support prime contractors. The procurement is managed by the University of Houston in Texas under NAICS code 423440. The solicitation was posted on September 15, 2026, with a response deadline of October 7, 2026.

University of Houston

POSTED

about 12 hours ago

DEADLINE

HVAC Packaged Unit and Coil SupplyThis subcontract opportunity with Adams & Associates, Inc. involves the supply of 12.5 SEER packaged units and compatible coils for U.S. Department of Labor projects at the Atterbury Job Corps Center. The contractor must provide eco-sensitive units using non-R22 refrigerants, specifically R-410A or R-454B, and ensure all equipment complies with Buy American and Buy America requirements. The project is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses. Interested parties must submit their responses by October 5, 2026, under NAICS code 423440.

Adams & Associates, Inc.

POSTED

about 24 hours ago

DEADLINE

Janitorial Supplies ProvisioningThis subcontract opportunity, titled Janitorial Supplies Provisioning, involves the supply and delivery of consumables and chemicals for prime contractors operating at DOTHAN TPSC facility projects. The scope of work includes providing essential items such as paper towels, toilet tissue, trash liners, soaps, and approved cleaning chemicals directly to the site. Interested parties must possess a manufacturer's reseller authorization to be eligible. The solicitation was posted on September 14, 2026, with a response deadline of September 24, 2026. This requirement falls under NAICS code 423440 and is associated with the state of Alabama.

POSTED

DEADLINE

Supply of Heavy Duty Wet Floor Cone SignsThis subcontract involves the procurement and delivery of heavy-duty wet floor cone signs for prime contractors working on projects at the Princess Margaret Hospital. The selected provider is responsible for sourcing safety cones made of heavy-duty plastic or rubber and delivering them directly to the hospital facility located at 54 Lyssons Road. The contract is managed by the Government of Jamaica and adheres to CPV code 34928460 and NAICS code 423440. The agreement focuses on the physical supply and transport of these safety markers to ensure facility compliance and safety standards are met at the hospital site.

Princess Margaret Hospital

POSTED

DEADLINE

Supply of CRES 15-5PH Raw MaterialThis subcontract involves the supply of certified CRES 15-5PH precipitation-hardening stainless steel raw material in the form of bar or tube. The materials are intended for prime contractors producing fluid handling components for the Department of Defense Fluid Handling Division. A critical requirement of the contract is the provision of Mill Test Reports to verify that the alloy strictly adheres to 15-5PH specifications. The procurement is categorized under NAICS code 423440 and is associated with performance in New Cumberland, Pennsylvania. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from North Carolina State University

Same awarding agency

Fabrication of 1,000-Gallon Stainless Steel Vacuum TanksThis subcontract involves the fabrication of two 1,000-gallon stainless steel vacuum tanks designed for a Mach-7 Reflected Shock Tunnel as part of research projects at North Carolina State University. The scope of work includes pressure vessel fabrication, assembly, and precision welding using high-vacuum compatible seals. The contractor must maintain ASME certification for pressure vessels and ensure full compliance with OSHA standards. The final deliverable consists of two completed and certified vacuum tanks, with a response deadline for the solicitation set for September 30, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

1,000-Gal Stainless Steel Vacuum Tanks

Solicitation # 63-ARM1202926

Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 23 hours ago

DEADLINE

Fire Extinguisher Lifecycle Maintenance and InspectionThis subcontract for North Carolina State University involves fire extinguisher lifecycle maintenance and inspection services for prime contractors on facility projects. The scope of work requires the performance of 11 monthly inspections and one annual on-site inspection per unit each year, which includes necessary testing, recharging, and annual servicing. All activities must strictly adhere to the NFPA 10 2013 edition and the Fire Prevention Section of the 2018 NC Building Code. The selected provider is responsible for delivering all completed inspection reports and ensuring all extinguishers are properly serviced. This opportunity falls under NAICS code 811310, with a response deadline of September 24, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Fire Extinguisher and Accessory ProcurementThis subcontract for North Carolina State University focuses on the procurement and delivery of brand new, unused fire extinguishers and accessory parts for prime contractors working on university facility projects. The supplier is responsible for delivering various-sized units to designated storage locations, ensuring all equipment strictly adheres to the NFPA 10 2013 edition and the Fire Prevention Section of the 2018 NC Building Code. A critical requirement of this agreement is the prohibition of refurbished units, as only new equipment is permitted. The solicitation was posted on September 10, 2026, with a response deadline of September 24, 2026, falling under NAICS code 423450.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Fire Extinguisher Purchases / Services / Inspections

Solicitation # 63-DMP1193929

North Carolina State University is seeking quotations from qualified suppliers for the procurement of various-sized fire extinguishers, related accessory parts, and professional inspection and maintenance services. All provided equipment and services must strictly adhere to the standards set forth in the NFPA 10 2013 edition and the Fire Prevention Section of the 2018 NC Building Code. This solicitation, identified by number 63-DMP1193929, was posted on September 10, 2026, with a response deadline of September 24, 2026. The contract is managed by North Carolina State University, with Jessica Bowley serving as the primary point of contact for interested vendors.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS