Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Supply of Mechanical Seal Replacement Parts Kit

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of a mechanical seal replacement parts kit identified by NSN 5330014521310, specifically tailored to meet Department of Defense requirements. The scope includes all necessary components for replacement, along with proper packaging and labeling that adhere to established DoD standards to ensure compatibility, traceability, and readiness for deployment. The item is classified under NAICS code 332996, indicating it is part of other fabricating operations, and the award is structured as a subcontract under the Defense Logistics Agency, which operates under the Department of Defense. Delivery must be fully compliant with military logistics protocols, ensuring the kit is ready for immediate use in operational environments. The contract was posted on July 17, 2026, and is linked to the award record through the DIBBS system under contract SPE7LX22D0068 with delivery order SPE7L126FAU7B. There is no specified set-aside classification or small business designation, suggesting the opportunity is open to all qualified vendors. The place of performance and office address details are not provided, indicating that delivery may be directed to any DoD-affiliated location as required. The contractor is responsible for end-to-end compliance, from manufacturing and assembly to final packaging and shipment, ensuring the kit meets all functional, logistical, and regulatory expectations of the military supply chain.

General Info

Supply of DoD-compliant mechanical seal replacement kit under DLA subcontract with strict logistics and packaging requirements.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provision of a mechanical seal replacement parts kit (NSN: 5330014521310), including packaging, labeling, and delivery compliant with DoD standards.

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M5-26-T-337C
The contract solicitation SPE7M5-26-T-337C calls for the procurement of 73 units of a critical application hose clamp made from aluminum alloy band material with a t-bolt steel alloy and self-locking nut, featuring an 8.25-inch nominal inside diameter and 0.62-inch nominal width. The item is identified by NSN 4730-00-439-2933 and is supplied under two vendor part numbers: Eaton Aeroquip LLC P/N 321-62-825S and V I J Corp P/N U11-62-825S. Delivery is required within 81 days of award, with FOB origin terms and inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia. The unit price is set at $73.00 per unit, totaling $5,329.00 for the full quantity, with zero variance allowed in quantity. Packaging must comply with ASTM D3951, but all requirements from the DLA Master List of Technical and Quality Requirements take precedence, including palletization under RP001 and labeling per MIL-STD-129, which mandates proper marking with unit of issue and quantity per unit pack, along with barcoding for traceability. Hazardous material labeling must align with 29 CFR 1910.1200, and all supplies must be free of government identification if non-accepted. The contract incorporates multiple FAR and DFARS clauses including those related to small business representation, employment equity, trafficking in persons, hazardous materials identification, sustainable products, and transportation by sea, with specific adherence to NIST SP 800-171 DOD assessment requirements. Proposals must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by the deadline of August 5, 2026, and must include required representations regarding unique entity ID and CAGE codes, small business status, and compliance with defense telecommunications equipment disclosures. Payment will be processed through WAWF, and the contracting officer retains full authority to determine contract type and insert specific details not currently completed in the solicitation.
ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-271N
The contract seeks the procurement of 134 metallic tubes designated for use as aircraft tow bars, identified by NSN 4710-01-289-2302 and part number 1479AS101-3, under a simplified acquisition process with a total small business set-aside. Delivery is required within 122 days after the date of order, with a final need ship date of December 1, 2026, and an absolute deadline of September 5, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is fixed-price and includes detailed technical and quality requirements derived from the DLA Master List of Technical and Quality Requirements, mandating adherence to standards such as MIL-STD-129 for marking and packaging, ASTM D3951 for packaging, and MIL-A-8625 for anodic coating. All items must be permanently marked with producer identification, specification, composition, size, contract number, NSN, and seam type, and must comply with DLA packaging requirements and hazardous material labeling under 29 CFR 1910.1200 and MIL-STD-129 for radioactive content thresholds. The supplier must be certified as a CMMC Level 2 C3PAO and comply with DFARS 252.204-7012 for the protection of covered defense information, implementing NIST SP 800-171 security controls. Safety Data Sheets must be submitted prior to award and updated for any composition changes, and all hazardous materials must be labeled per regulatory standards. Quality conformance requires the submission of a Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and uploaded electronically to iRAPT along with certified test reports. Inspection and acceptance occur at origin by the Government, with the contractor responsible for maintaining compliance throughout production. The contract prohibits Class I ozone-depleting chemicals and mandates configuration change management and removal of government identification from non-accepted items. Electronic submission via the DLA-BSM Internet Bid Board System is required by the August 5, 2026 deadline, with all documentation, including COQC, SDS, and bar-coded labels, governed by DLA’s e-procurement protocols and submitted through WAWF for invoicing and receiving.
FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
STRAINER ELEMENT, SE
Solicitation # SPE7M3-26-T-7565
The contract pertains to the procurement of nine Strainer Elements, Sediment, identified by NSN 4730014689945 and part number 120-45-S08211, under solicitation SPE7M3-26-T-7565, issued by the Defense Logistics Agency’s Fluid Handling Division. The acquisition is structured as a total small business set-aside under NAICS code 332996, with delivery required within 203 days after receipt of order, targeting a need ship date of February 20, 2027. Goods are to be delivered FOB origin to the DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance also occurring at the destination. The unit of issue is each, with a unit price of $9.00, totaling $81.00 for the quantity ordered. Packaging and marking must adhere strictly to MIL-STD-2073-1E and MIL-STD-129, including specific codes for preservation, wrapping, cushioning, and container types, with palletization governed by DLA’s RP001 requirements. No special marking is required, but hazardous material compliance is mandatory per 29 CFR 1910.1200 and NAVSEA 5100-003D, prohibiting intentional introduction of mercury or mercury compounds unless exempted for functional applications like batteries or sensors, which must include secondary containment. Invoicing is exclusively through Wide Area WorkFlow, and payment processing relies on DoDAAC routing information specified in the final award. Technical and quality requirements are incorporated via the DLA Master List identified by R or I numbers, and all contractors must comply with a suite of FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment verification, sustainable products, hazardous materials, cybersecurity (NIST SP 800-171), whistleblower rights, and subcontracting for commercial items. Contractors must maintain valid UEI and CAGE codes, certify small business status through SAM.gov, and submit required representations via DIBBS by the August 5, 2026 deadline, with no formal evaluation factors or pricing data published in the solicitation beyond the nominal unit cost.
FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, FL
Solicitation # SPE4A5-26-T-299Z
The contract is for the procurement of two straight flange-to-tube adapters with NSN 4730-01-196-6006 and part number 9969M50P02 from General Electric Company, issued under solicitation SPE4A5-26-T-299Z by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 171 days after order placement, with an original delivery deadline of November 27, 2027, and a need ship date of January 17, 2027. The item must be manufactured and delivered FOB destination to the DLA Distribution facility in New Cumberland, Pennsylvania, with no tolerance for quantity variance. Packaging must comply with ASTM D3951, but all requirements from the DLA Master List of Technical and Quality Requirements take precedence, including RP001 for palletization and RQ017 for physical identification and bare item marking. All packaging and labeling must adhere to MIL-STD-129, including barcoding per DoD logistics standards, with the unit of issue as each and quantity per unit pack as specified. Sampling for inspection follows MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances for acceptance unless otherwise stipulated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0, respectively. Inspection and acceptance are conducted at the origin. The adapter is designated as a critical application item with no shelf life requirement, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i). The contract enforces compliance with hazardous material identification via FAR 52.223-3, cybersecurity protections under 252.204-7012, prohibition of hexavalent chromium, and restrictions on the use of foreign-flag vessels for shipping, which require prior approval and certification. The contractor must flow down applicable clauses to subcontractors and comply with labor laws, including combating trafficking in persons, employment eligibility verification, and whistleblower protections. Invoicing must be submitted electronically via Wide Area WorkFlow, and no pricing information is provided in the contract, as unit and total prices remain blank. The solicitation required electronic submission through
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M1-26-U-4471
This contract is a solicitations for a commercial item, specifically a quick disconnect coupling half, part number 6903-041, manufactured by Parker Hannifin Corporation, with a National Stock Number of 4730002423003. The item is a threaded male fitting sized for 3/8 inch OD tube, rated for 1500 psi operating pressure, and is designated as a critical application component for use on H-3, B-52, and C-141 aircraft. The solicitation is structured as an indefinite-delivery contract with a maximum value of $350,000, and an estimated base quantity of 6 units at $6.00 per unit, though the base quantity is explicitly noted as an estimate and not a firm commitment. Delivery is FOB origin with an 84-day delivery window, zero variance tolerance, and inspection and acceptance occurring at the destination. Packaging must conform to ASTM D3951 unless overridden by the DLA Master List of Technical and Quality Requirements, which takes precedence, and all items must be palletized per RP001 and marked and labeled according to MIL-STD-129, including full compliance with barcoding and hazardous material labeling requirements under OSHA’s Hazard Communication Standard and DFARS 252.223-7001. The item cannot contain hexavalent chromium, and any hazardous materials must be properly documented and labeled prior to award. The contract requires full compliance with a wide array of federal acquisition regulations, including cybersecurity protections under DFARS 252.204-7012 and 252.240-7997, mandating implementation of NIST SP 800-171 controls and submission of assessment results via the Supplier Performance Risk System. Contractors must affirm no use of covered defense telecommunications equipment, comply with employment eligibility verification, and adhere to trafficking and equal opportunity requirements. Invoicing must occur exclusively through Wide Area WorkFlow, and payment details, along with accountable appropriation data, will be specified in the resulting award. The solicitation is set aside entirely for small businesses under NAICS code 332996, and responses must be submitted electronically through the DIBBS portal by the July 31, 2026 deadline. Offerors are required to provide their Unique Entity ID and CAGE code, and must certify compliance
MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
COUPLING, TUBE
Solicitation # SPE7L1-26-T-856F
This contract is for the procurement of 219 units of a tube coupling, specifically a Permaswage flareless sleeve designed for aircraft applications, identified by NSN 4730-00-009-5216. The item is classified as a commercial item and must be manufactured using a forging process, requiring specialized tooling that must be sourced in coordination with DLA’s Aviation, C&E or Land & Maritime Supply Chain teams. Delivery is required within 87 days after award, with a need ship date of September 9, 2025, and a final delivery deadline of October 17, 2026. All items must be shipped FOB origin, inspected and accepted at destination, and packaged in strict compliance with MIL-STD-2073-1E and DLA’s RP001 packaging requirements. Each unit must be cleaned and dried only, with no preservation materials, wrapping, or cushioning used, and all packaging must include a blanket wrap unit container and an E5 intermediate container. Marking must conform to MIL-STD-129 with a 2D Data Matrix barcode on all packaging levels and no special markings required. The contract explicitly prohibits the intentional addition or direct contact of mercury or mercury compounds in the item, its packaging, preservation, or labeling, with limited exceptions for functional uses in batteries, instruments, sensors, weapon systems, or Navsea-specified reagents, which must also include a secondary containment as per NAVSEA 5100-003D. Hazardous material labeling must comply with OSHA’s Hazard Communication Standard and DFARS 252.223-7001, excluding materials regulated under FIFRA, FFDCA, CPSA, FHSA, or FAA Act. All vendors must represent their small business status and provide a Unique Entity Identifier and CAGE Code. The contract includes standard FAR and DFARS clauses covering inspection, termination, cybersecurity safeguards, trafficking in persons, employment eligibility, sustainable products, and prohibition of hexavalent chromium. Invoicing is required through Wide Area WorkFlow, and payment is contingent upon accurate electronic submission of receiving reports and invoices. The solicitation was issued on July 31, 2026, with a response deadline of August 5, 2026, under the NAICS code 332996, and will be awarded by the Department of Defense’s Land
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-Q-2104
The contract pertains to the procurement of 12-volt lead acid storage batteries, specifically the Power-Sonic Corporation model PG-12V35FR, with a total quantity of 90 units distributed across multiple Navy vessels. These batteries are commercial off-the-shelf items with a mandatory Type I shelf life of 12 months, non-extendable, and must be supplied with two bolts and two washers for terminal cable attachment. Strict compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements is enforced, including the special marking code 32 to indicate shelf life classification. All shipments must adhere to DLA packaging and palletization rules, with hazardous materials handling governed by IP025, and mercury or mercury compounds are prohibited except where functionally necessary and explicitly authorized. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise specified. The contract uses a firm fixed price with zero quantity variance, origin inspection and acceptance, and FOB origin terms. Delivery must occur within 60 days of award, and all items must be shipped via traceable freight using VSM, explicitly forbidding parcel post. Each shipment is directed to specific Navy vessel addresses using RDD codes, with transportation governed by DLAD procedural notes, and delivery timelines are individually assigned, ranging from March to June 2026.
Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331221
New
DIBBS
POST, FENCE, METAL
Solicitation # SPE8E6-26-T-3754
The contract involves the procurement of 92 units of zinc-coated steel pipe fence posts, each measuring 4.0 inches outside diameter and 13.0 feet overall length, with a weight of 9.11 pounds per foot, intended for use as gate posts in chain link fencing systems. The product is identified by NSN 5660-01-015-9800 and must conform to Federal Specification RR-F-191K Revision K dated February 13, 2023, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting provisions in other standards. Packaging must adhere to ASTM D3951 and fully comply with RP001, DLA’s Packaging Requirements for Procurement, including palletization, while labeling and marking must strictly follow MIL-STD-129, incorporating barcodes and unit of issue data as specified. The items are to be delivered FOB origin with a strict delivery window of five days to Sweihan Air Base, AE, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The total contract value is $8,464.00 at a unit price of $92.00 per unit, with delivery required no later than July 17, 2026. All submissions must be made through the DIBBS portal by the proposal deadline, and invoicing is mandatory via Wide Area WorkFlow with electronic payment instructions governed by DFARS clauses. The contract incorporates multiple FAR and DFARS clauses related to employment equity, trafficking in persons, sustainable products, hazardous material labeling, cybersecurity, subcontracting, and maritime transport, including a strict requirement that sea shipments must use U.S.-flag vessels with 45-day advance notice for waivers. Compliance with safety data sheet requirements and hazardous material declarations is mandatory, and all subcontractors must flow down applicable clauses. Offerors must provide their Unique Entity ID and CAGE code and make accurate socioeconomic representations. Deviations from standard clauses are permitted under specific government-issued deviation numbers, and the contractor is responsible for ensuring all material, packaging, and shipping documentation meets federal and agency standards without exception.
Rolled Steel Shape Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334416
New
DIBBS
POWER SUPPLY ASSEMBLY
Solicitation # SPE7L7-26-T-4377
The contract involves the procurement of a single Power Supply Assembly, identified by NSN 6130-01-476-2036, under solicitation SPE7L7-26-T-4377 issued by the Defense Logistics Agency. Delivery is required within 20 days after order placement to the destination address associated with USS PATRIOT MCM 7 at FPO AP 96675, with FOB DESTINATION terms applying. The contractor, K D K ELECTRONICS, INC., must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements and governed by MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, labeling, and barcoding, including UCC/ITF-14 and Data Matrix symbols. Zero tolerance is enforced for quantity variance, and all hardware must be free of intentional mercury or mercury compounds, with limited exceptions for specific functional applications compliant with NAVSEA 5100-003D. Cyberspace requirements mandate CMMC Level 2 self-assessment and full compliance with the NIST SP 800-171 DOD Assessment Requirements and DFARS 252.204-7012 for safeguarding covered defense information, alongside the Basic Safeguarding of Covered Contractor Information Systems clause. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero acceptance criteria unless otherwise specified. The contract includes clauses requiring adherence to environmental prohibitions such as the elimination of hexavalent chromium and proper handling of hazardous materials, with mandatory submission of Safety Data Sheets prior to award. Payment must be processed exclusively through WAWF using approved document types like the Invoice and Receiving Report, and the contractor must maintain an active UEI and CAGE code while certifying its small business status if applicable. All submissions must be made via DIBBS by the deadline of August 5, 2026, with no alternative submission methods permitted.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GATE
Solicitation # SPE7MC-26-T-3635
The contract pertains to the procurement of one gate valve with NSN 4820-01-465-8423 under solicitation SPE7MC-26-T-3635, issued by the Defense Logistics Agency on behalf of the Department of Defense. The item is required for delivery within five days of award, with a response deadline of August 5, 2026, and is classified under NAICS code 332911. The procurement is subject to the DLA Packaging Requirements and incorporates all technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on the acquisition size. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware unless explicitly exempted, such as in functional batteries, fluorescent lights, designated instruments, sensors, controls, weapon systems, or specific chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or portable instruments containing mercury must be shockproof and include a secondary containment barrier to prevent leakage, in compliance with NAVSEA 5100-003D. The sole point of contact for the solicitation is Tracy Smith, reachable via email and phone, with performance required at the location identified by zip code 93928-7156 in Jolon.
Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-142D
The contract is for the procurement of one ball valve with NSN 4820015636585 under solicitation SPE7MC-26-T-142D issued by the Defense Logistics Agency. Delivery is required within 20 days of order issuance to the USS MESA VERDE LPD 19 at FPO AE 09578, with all shipments going FOB destination and no variance allowed in quantity. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all markings must include the correct Unit of Issue and Quantity per Unit Pack. The valve must not contain mercury or mercury compounds except in specific exempted uses such as functional batteries or sensors, and any portable devices containing mercury must have shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and the Government retains full authority to reject nonconforming supplies. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting commercial standards. The contract incorporates multiple Federal Acquisition Regulation clauses including 52.246-2 for inspection, 52.249-8 for default, 52.227-1 Alternates I and II for authorization and consent, and 52.222-50 and 52.222-54 for combating trafficking and employment eligibility verification, all with deviations effective in 2026. Defense-specific clauses under DFARS include 252.240-7997 for NIST 800-171 compliance, 252.232-7010 for levies on payments, 252.246-7003 for safety issue notifications, and 252.223-7001 for hazardous material labeling. Invoicing must be processed exclusively through Wide Area WorkFlow, and payment routing relies on DoDAACs not detailed in the solicitation. Offerors must provide a Unique Entity ID and CAGE code, and may claim small business or socioeconomic status benefits including HUBZone, 8(a), WOSB, or SDVOSB, with automated award preferences applied. Compliance with safeguarding contractor information systems
Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
New
DIBBS
TOOL, PULLING, MALE, DIVI
Solicitation # SPE8E6-26-Q-0607
The contract is for a single unit of a pulling male diving tool designated under the NSN 4220-01-130-5526, part of the MK 12 Diving System, with a delivery requirement of 60 days after delivery order. The solicitation number is SPE8E6-26-Q-0607, issued by the Defense Logistics Agency under the Department of Defense, with a response deadline of August 10, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date based on acquisition scale. Packaging must comply with DLA standards, and the item has no shelf life. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons, including foreign nationals within the United States. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, submitted the DLA Export-Controlled Technical Data Questionnaire, and received formal approval from the DLA controlling authority. DFARS 252.225-7048 governs the handling of this controlled technical data, and government identification must be removed from non-accepted supplies. The point of contact for this solicitation is Jasmine Jiles, with primary communication via email and phone.

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 326191
New
DIBBS
TOILET, MARINE
Solicitation # SPE8E8-26-T-4762
The contract pertains to the procurement of one marine toilet, identified by NSN 4510016022193 and manufactured by Dometic Corporation under part number 301197506, with three identical line items totaling three units to be delivered. All items are subject to a strict five-day delivery window from award, with FOB Origin terms meaning title transfers at the supplier’s location, and final acceptance occurring upon delivery to the designated Virginia Beach facility. Packaging must comply with ASTM D3951 but is overridden by the DLA Master List of Technical and Quality Requirements, which takes absolute precedence; palletization must follow RP001, and all items must be marked and labeled per MIL-STD-129 with proper NSN, lot number, and machine-readable barcoding. Parcel post is strictly prohibited, and shipments must be sent via the fastest traceable means with RDD 777 designation. The solicitation, identified as SPE8E8-26-T-4762, has a response deadline of August 5, 2026, and requires electronic submission through DIBBS. Pricing is not specified in the document, indicating a blank solicitation for offeror responses, with no total contract value stated. Compliance with extensive FAR and DFARS clauses is mandatory, including cybersecurity safeguards under 252.204-7012, safeguarding covered defense information, combating human trafficking, employment eligibility verification, sustainable product use, hazardous materials identification, and whistleblower protections. Offerors must hold a current UEI and CAGE code and disclose socioeconomic status, including small business or veteran-owned certifications if applicable. Any use of covered defense telecommunications equipment triggers additional disclosures. Inspection and acceptance occur at the destination, and invoice submission must be electronic through WAWF. The contract requires adherence to strict documentation protocols, including the use of standardized reporting formats and compliance with all DLA packaging, marking, and transportation directives.
Plastics Plumbing Fixture Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332215
New
DIBBS
KNIFE, DIVER'S
Solicitation # SPE8E6-26-Q-0606
This contract pertains to the procurement of four Diver’s Knives with NSN 4220-00-372-0665 under solicitation SPE8E6-26-Q-0606, issued by the Defense Logistics Agency. The item must be manufactured in strict accordance with drawing 921557 and associated technical documentation, including qualified assurance provisions and updated revisions as referenced. Material specifications cited in the original drawing, such as MIL-B-16541 and MIL-I-763, are obsolete; acceptable alternatives include any current bronze specification equal to or better than Grade A bronze and any varnished maple hardwood. Production may require casting or forging, and the government does not provide associated tooling, necessitating contractors to submit a Casting and Forging Assistance Request for support. Inspection and acceptance occur at destination, with firm fixed pricing and zero variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-B-117 standards, with marking per MIL-STD-129 and no special markings required. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Tolerances for machined and casting dimensions are defined by strict dimensional allowances based on size ranges, with angular tolerances set at ±0°30′. The supply is subject to full and open competition, with no restrictions on bidder eligibility. Mercury or mercury-containing compounds are prohibited in or on the item except for specific functional uses such as batteries, instruments, or sensors as outlined in NAVSEA 5100-003D, with additional containment requirements for portable devices. The contract incorporates all applicable technical and quality requirements from the DLA Master List of Requirements, referenced by R or I numbers, with revisions governed by the solicitation or award date depending on acquisition size. Delivery is required within 60 days after award, with FOB origin terms and transportation details directed to the Commander, SRF-JRMC Yokosuka Naval Base in Japan. The unit of issue is each, with pricing and order quantity fixed at four units. The contract includes provisions for the removal of government identification from non-accepted supplies and affirms that covered defense information may apply. The item is procured to support a specific government
Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details