Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Mercury-Free and Sustainable Packaging Materials

Active

Federal

Response Deadline08/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of packaging, preservation, and marking materials that are free of mercury and compliant with sustainable product requirements, emphasizing environmental responsibility and regulatory adherence. All materials must meet strict criteria to ensure they do not contain mercury or other hazardous substances, aligning with broader defense and sustainability initiatives. The procurement is structured as a subcontract and falls under NAICS code 324199, indicating its focus on other petroleum and coal products manufacturing. Performance is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002, signaling the location where delivery and compliance verification will occur. The opportunity was posted on August 4, 2026, and responses are due by August 12, 2026, providing a limited window for qualified suppliers to submit proposals. The contracting activity is under the ASC Commodities Division of the Department of Defense, underscoring the military significance of the requirement and the need for reliable, eco-conscious supply chain solutions.

General Info

Supply mercury-free eco-compliant packaging materials for DoD in New Cumberland, PA, due August 12, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

324199 - All Other Petroleum and Coal Products ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply preservation, packaging, and marking materials free of mercury and compliant with sustainable product requirements.

Similar Contracts

Same NAICS industry code

Radioactive Source Supply and Handling

ASC COMMODITIES DIVISION

POSTED

DEADLINE

OVEN, THERMAL DRYING

Solicitation # SPE8E8-26-T-5069

The contract is for the procurement of six thermal drying ovens under solicitation SPE8E8-26-T-5069, issued by the Department of Defense through the DDSP New Cumberland Facility. The item is identified by NSN 4430-01-668-9983 and part numbers 50128124 and OMH60 from Thermo Fisher Scientific (Asheville), with a total contract value of $6.000 per unit. Delivery is required FOB origin within 167 days, with an original delivery date of February 11, 2027, and a need ship date of February 1, 2027. The contract is a total small business set-aside under NAICS code 324199, and compliance with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 is mandatory, including specific packaging methods, container types, and marking standards. Inspection and acceptance occur at destination, with no quantity variance allowed. Technical and quality requirements referenced by R and I numbers are incorporated from the DLA Master List, and documentation for source approval must meet RC001 standards. Removal of government identification from non-accepted supplies is required per RQ011, and shipping must follow DLA procedures C19 and C20 to the designated delivery address in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Personal Hygiene and Patient Care Items

Southern Regional Health Authority

POSTED

DEADLINE

Supply of Spill Kits and Safety EquipmentThe contract seeks the supply of spill containment kits and associated safety equipment specifically designed for the safe handling of Rapicide PA disinfectant spills, ensuring compliance with procedural and safety standards in medical and facility environments. The work is intended for subcontracting under the Department of Veterans Affairs, managed by the 242-NETWORK Contract Office 02, with performance expected to support operational safety requirements across VA facilities. The North American Industry Classification System code 324199 indicates the scope relates to other petroleum and coal products manufacturing, suggesting the kits may involve specialized materials or components aligned with hazardous substance response. Subcontractors must submit responses by the deadline of August 10, 2026, at 5:00 PM, following the posted solicitation on SAM.gov, which remains open for review and proposal submission from the issuance date of August 4, 2026. While detailed specifications for the kits are not included in the metadata, the requirement implies adherence to regulatory guidelines for chemical spill management, including absorbent materials, personal protective equipment, disposal protocols, and labeling compliant with OSHA and EPA standards. The absence of set-aside classifications or specific performance location details suggests this is a broad, non-targeted subcontract opportunity open to qualified vendors capable of delivering certified spill response solutions.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

Supply of Spill Cleanup Absorbents and Non-RCRA SolidsThe Defense Logistics Agency is soliciting a subcontract for the supply and delivery of pre-packaged, non-hazardous spill cleanup materials designed for environmental response, including absorbents, spill dirt, and gravel-based kits. These materials are categorized as non-RCRA solids, ensuring compliance with environmental regulations while providing effective containment and cleanup capabilities for spills. The contract is classified under NAICS code 324199, indicating it relates to other petroleum and coal products manufacturing, and is intended to support the Department of Defense’s readiness and environmental response capabilities. Deliveries will be made to meet operational needs across unspecified locations, with no specific place of performance detailed in the posting. The solicitation was posted on July 28, 2026, and the contract award reference number is SP450026D0002 with delivery order SP450026F6007. All materials must be non-hazardous, properly labeled, and packaged for immediate deployment in emergency and routine spill scenarios.

Defense Logistics Agency

POSTED

DEADLINE

Hot-Pour Crack Sealant SupplyThe Texas Department of Transportation is seeking a subcontractor to supply hot-applied rubberized or polymer-modified asphalt sealant for highway crack sealing operations, with the solicitation posted on July 28, 2026, and responses due by August 18, 2026. The sealant must meet specification standards for use in high-traffic road environments, ensuring durability, adhesion, and resistance to weathering and traffic wear. The contract falls under NAICS code 324199, which categorizes other petroleum and coal products manufacturing, indicating the product is a specialized asphalt-based material formulated for pavement preservation rather than general construction. Performance of this contract will occur across Texas state highways, with no specific city or zip code designated as the place of performance, implying the sealant must be deliverable to multiple locations statewide as required by maintenance schedules. The agreement is structured as a subcontract, meaning the supplier will provide materials to a prime contractor or agency entity responsible for field application, rather than performing the sealing work directly. Bidders must ensure their product complies with TxDOT’s technical requirements for hot-pour sealants, including viscosity, elasticity, and temperature resistance, and be prepared to meet just-in-time delivery schedules to support seasonal pavement repair operations. All inquiries and submissions must be processed through the TX SmartBuy portal linked in the posting.

Texas Department of Transportation

POSTED

DEADLINE

Rubberized Asphalt Sealant SupplyThe contract is for the supply of rubberized asphalt sealant material specifically intended for crack sealing operations, with strict adherence to established product specifications to ensure performance and durability in field applications. The material must be delivered directly to designated project sites as required by the Public Works agency of Arizona, with full compliance expected throughout the supply chain and application process. This subcontract is part of an infrastructure maintenance initiative aimed at preserving pavement integrity through effective, long-lasting crack repair solutions. The solicitation is open for responses until August 13, 2026, at 8:30 PM Arizona time, and the contract falls under the NAICS code 324199 for other petroleum and coal products manufacturing. The place of performance spans unspecified locations within Arizona, and while no set-aside designation is listed, the procurement is structured as a subcontract under the Public Works department. All vendors must meet technical and logistical requirements to qualify, with delivery timelines and material quality being central to award consideration. The official portal for details is accessible via the provided UI link.

POSTED

DEADLINE

Friction Mastic Material SupplyThe contract involves the supply of ONYX-branded or approved equivalent friction mastic material that meets AASHTO TSP2 specifications, encompassing the emulsion, aggregate, and necessary additives required for pavement friction enhancement. The material must comply strictly with the technical standards outlined in the specification to ensure performance and durability under traffic and environmental conditions. Submissions are limited to products that are either officially branded as ONYX or approved equivalents that have been verified to fulfill all required criteria without deviation. This is a subcontract opportunity posted by the state of Utah, with the NAICS code 324199 indicating classification under other petroleum and coal products manufacturing. The solicitation was posted on July 23, 2026, and responses are due by August 13, 2026, at 4:00 PM. The place of performance and specific delivery locations are not detailed in the provided data, but the material will be utilized within Utah’s transportation infrastructure projects. Interested parties must submit their proposals through the designated online platform by the deadline, as no alternative submission methods are indicated.

POSTED

DEADLINE

U.S.-Based Advanced Materials Supply for Oilfield UseThe contract seeks U.S.-based suppliers to provide domestically manufactured corrosion-resistant coatings, friction-reducing liners, or composite materials specifically for use in oilfield pipelines to ensure long-term structural integrity. These materials must meet stringent performance standards for durability under harsh operational conditions and must be entirely produced within the United States to support national energy infrastructure resilience. The effort is aligned with the Department of Energy’s National Energy Technology Laboratory’s mission to advance secure, sustainable, and reliable energy technologies through domestic innovation and manufacturing. Proposals are due by September 22, 2026, and the opportunity is classified as a subcontract under NAICS code 324199, which pertains to other petroleum and coal products manufacturing. While no set-aside provisions are specified, preference will be given to firms capable of demonstrating proven capabilities in producing advanced materials that meet the technical requirements for pipeline protection. The place of performance and point of contact details are not provided, but all submitted materials must align with federal procurement guidelines and demonstrate full compliance with U.S. manufacturing and quality assurance standards.

National Energy Technology Laboratory

POSTED

DEADLINE

in about 2 months

Hazardous Waste Material Supply & PackagingThe contract encompasses the supply and proper packaging of hazardous waste materials including paint filters, contaminated rags, debris, and absorbents, all in strict adherence to military and Department of Transportation regulatory standards. This subcontract, issued under the Defense Logistics Agency within the Department of Defense, requires full compliance with applicable safety, handling, and documentation protocols to ensure secure transportation and disposal of hazardous materials. The work is governed by NAICS code 324199, indicating specialized waste treatment and environmental services, and the performance is expected to meet federal defense supply chain requirements without specific geographic constraints noted. The contract was posted on July 20, 2026, and is managed through the DIBBS platform, with no set-aside provisions designated for small businesses or other categories. All materials must be packaged, labeled, and documented in alignment with DOT and military hazardous materials regulations, emphasizing worker safety and environmental protection. The contract does not specify a point of contact or detailed location for performance, suggesting it may be executed across multiple defense installations or logistics hubs under the agency’s oversight.

Defense Logistics Agency

POSTED

DEADLINE

Burner Fuel Oil (FJ1) SupplyThe contract involves the supply of 3,172 U.S. gallons of Fuel Oil, Burner FJ1, solely for use in facility operations located in Japan. This undertaking is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 324199, which pertains to other petroleum and coal products manufacturing. The contract was posted on July 17, 2026, and is designated for the fulfillment of energy needs required to sustain critical facility functions in the region. The exact delivery location and point of contact are not specified in the provided data, but performance is confined to Japan. The award details can be accessed through the DIBBS system using the provided linkage, which contains official procurement records linked to contract SPE60524D1004 and delivery order SPE60526FHRU6.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Quick-Light Charcoal (NSN 9925014593321)The contract pertains to the procurement and delivery of one box of quick-light charcoal designated by NSN 9925014593321 for military use, requiring strict adherence to established technical and performance specifications. Delivery must be completed FOB Destination to Blount Island, Florida, no later than July 31, 2026, ensuring the product arrives in a condition suitable for immediate operational deployment. The acquisition is categorized as a subcontract under NAICS code 324199 and is managed by the Defense Logistics Agency under the Department of Defense, reflecting its alignment with broader military supply chain requirements. Although no solicitation number is listed and specific point of contact details are absent, the contract is accessible through the DIBBS system using the provided link for further administrative tracking and verification.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Unable to Decompose Prime ContractThe contract titled Unable to Decompose Prime Contract was posted on August 6, 2026, with a response deadline of August 21, 2026, and is classified as a subcontract opportunity under the Department of Defense through the ASC COMMODITIES DIVISION. No solicitation number, set-aside type, or NAICS code is provided, and critical details such as the point of contact, office address, and place of performance are incomplete or undefined. Despite the absence of substantive information required to break down the prime contract into subcontract opportunities, the associated link directs users to the DIBBS platform for potential further access. The system encountered a configuration error preventing data decomposition, leaving key procurement specifics undetermined.

POSTED

about 22 hours ago

DEADLINE

HVAC Equipment and Ductwork InstallationThe contract pertains to the installation of HVAC equipment, air handling systems, ductwork, and associated controls for heating and cooling distribution, under the NAICS code 238220 for HVAC installation services. It is structured as a subcontract and is managed by the ASC Commodities Division within the Department of Defense. The solicitation was posted on August 6, 2026, with a response deadline of August 18, 2026, and the performance location is not specified beyond the overarching agency jurisdiction. The work involves comprehensive mechanical system integration requiring precise coordination of equipment placement, airflow design, and control system implementation to ensure optimal environmental regulation across designated facilities. All bids must comply with federal subcontracting requirements and be submitted through the designated DIBBS portal prior to the stipulated deadline.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 22 hours ago

DEADLINE

Roofing System InstallationThe contract pertains to the supply and installation of low-slope membrane roofing systems, encompassing all necessary components such as insulation, vapor barriers, and detailed flashing work to ensure watertight performance and durability. The work is classified under NAICS code 238160, indicating it falls within the roofing contractors category, and is structured as a subcontract under the Department of Defense’s ASC Commodities Division. Performance is expected to occur at an unspecified location, with no detailed place of performance provided, and the solicitation remains open for response until August 18, 2026. The posting date indicates the opportunity was made available on August 6, 2026, and interested parties must submit their proposals by the deadline to be considered. All technical specifications and installation standards are implied to align with industry best practices for commercial and institutional low-slope roofing applications.

Roofing Contractors

POSTED

about 22 hours ago

DEADLINE

Concrete Formwork and PlacementThe contract titled Concrete Formwork and Placement pertains to the formwork construction, reinforcement, and pouring of structural concrete for foundations, slabs, and walls, covering all associated activities required to meet engineering specifications and structural integrity standards. Work is expected to be performed under a subcontract arrangement within the scope of NAICS code 238110, which classifies the activity as concrete work for building construction. The solicitation was posted on August 6, 2026, with responses due by August 18, 2026, under the oversight of the ASC Commodities Division within the Department of Defense. While the exact location of performance remains unspecified, the project is tied to federal defense infrastructure requirements. All parties must comply with applicable regulations and standards governing concrete placement and safety protocols for military-related construction.

Poured Concrete Foundation and Structure Contractors

POSTED

about 22 hours ago

DEADLINE

Plumbing and Piping Systems InstallationThe contract pertains to the installation of potable water, sanitary waste, and vent piping systems tailored to meet local plumbing codes and specific project requirements. This work is classified under NAICS code 238220, indicating it falls within the plumbing, heating, and air-conditioning contracting sector, and is structured as a subcontract under the Department of Defense’s ASC Commodities Division. The work must be executed in strict compliance with applicable regulations and detailed project specifications to ensure safety, functionality, and regulatory adherence. The solicitation was posted on August 6, 2026, with a response deadline set for August 18, 2026, providing potential contractors with a twelve-day window to submit proposals. The place of performance and exact location details are not specified in the available data, suggesting the work may be distributed across multiple sites or will be determined upon award. Interested parties must access the full solicitation through the provided DIBBS link to obtain all technical, administrative, and compliance requirements necessary for submission.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 22 hours ago

DEADLINE

Electrical Installation and Wiring ServicesThe contract pertains to the installation of electrical systems for commercial or infrastructure projects under the title Electrical Installation and Wiring Services, with NAICS code 238210, indicating classification under Electrical Contracting. It encompasses all aspects of electrical work including the deployment of conduits, wiring, lighting fixtures, and power distribution components necessary to support facility operations. The work is being procured as a subcontract under the Department of Defense, specifically through the ASC Commodities Division, and the performance location details are not specified, suggesting potential flexibility in site assignment across multiple locations. The solicitation was posted on August 6, 2026, with a response deadline of August 18, 2026, allowing interested parties a twelve-day window to submit proposals. No set-aside provisions are indicated, meaning the opportunity is open to all qualified vendors regardless of business size or ownership characteristics. The contract is not tied to a specific geographic location, and there is no designated point of contact provided in the data, requiring proposers to rely on the official DIBBS portal link for submission details and additional instructions. All work must align with federal standards for electrical installations and be executed to meet the operational demands of the end-user, likely to support defense-related infrastructure or facilities.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 22 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-R-XC33

This contract is an Indefinite Delivery Purchase Order (IDPO) issued by the Department of Defense’s DLA Aviation, Commodity Division, for the procurement of 90 units of a critical application cable assembly identified by NSN 5995-01-628-8998, with a guaranteed minimum order of 22 units per year and a maximum order limit of 90 units per delivery. The contract has a firm fixed price structure with no variance allowed in quantity, and delivery is required within 350 days after order award. The total estimated contract value is capped at $350,000, which serves as the aggregate spending limit across all orders issued over the five-year base period, during which orders may be placed for up to 1,825 days after the award date. The item is specified as a Mercury Mission Systems LLC part number 4585-05000-15-301, with strict prohibitions against the intentional introduction of mercury or mercury-containing compounds into the hardware, except for approved functional uses in batteries, fluorescent lights, weapons systems, and NAVSEA-specified reagents, which must include secondary containment and shock-proof design per NAVSEA 5100-003D. All supplies must comply with DLA’s Master List of Technical and Quality Requirements referenced by R or I numbers, and technical compliance is enforced through sampling methods in accordance with MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Packaging must adhere to MIL-STD-2073-1E with specific parameters for preservation, wrapping, and unit containment, and marking must follow MIL-STD-129 with no special markings required. Palletization must conform to DLA Packaging Requirements RP001. Inspection and acceptance occur at destination, and the contractor must maintain a government-approved inspection system, with Product Verification Testing conducted by the government at a designated lab prior to shipment; failure results in rejection of the entire lot. The contractor is also required to comply with stringent regulatory provisions including restrictions on hexavalent chromium, toxic material disposal, Buy American preferences, prohibitions on procurement from Xinjiang, antit

Current-Carrying Wiring Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE4A6-26-R-XA86

This contract solicits the procurement of 358 machine bolts with NSN 5306-01-096-5596 under solicitation number SPE4A6-26-R-XA86, issued by the Defense Logistics Agency’s Commodities Division under the Department of Defense. The delivery deadline is set at 736 days after contract award, with responses due by August 18, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging, inspection at origin, configuration change management, and export control of technical data are strictly governed by specific DLA requirements including RQ002, RQ009, and RQ032. The technical data associated with this item is subject to ITAR or EAR, and its disclosure to foreign persons—even within the United States—is prohibited without prior authorization. Contractors must be approved by DLA, hold valid US/Canada Joint Certification Program status, and have completed mandatory training and questionnaire compliance to access export-controlled data. Documentation for source approval, removal of government identification from non-accepted items, and bare item marking are required. The point of contact for inquiries is Ashley Hardy, reachable via email and phone.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 22 hours ago

DEADLINE

CABLE ASSEMBLY, RADI

Solicitation # SPE4A6-26-R-XC37

This contract is an Indefinite Delivery Purchase Order (IDPO) issued by the Defense Logistics Agency Aviation, Commodity Division, for the procurement of 140 cable assemblies, Radi, identified by NSN 5995-01-675-7639 and manufacturer part number 12006-7181-A30 from L3Harris Technologies, Inc. The base period spans five years with an estimated annual demand of 140 units and a guaranteed minimum quantity of 35 units per year, with a total contract ceiling of $350,000. Delivery orders may be issued for up to 140 units per order, with a required delivery window of 245 days after receipt of order, under FOB origin terms. The contract is firm fixed price with zero variance allowed in quantity. Inspection and acceptance occur at the destination, with the government retaining the right to reject the entire lot if product verification test samples fail at a government-designated lab; shipment is prohibited until acceptable test results are received unless otherwise directed. All items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, unit containers, and labeling directives. Special marking requirements mandate bold text on external packages stating “Product Verification Test Samples - Do Not Post to Stock” along with contract and lot numbers, and the special marking code is set to zero, indicating no additional markings. Packaging and palletization must adhere to DLA’s RP001 requirements, while documentation must include a hard copy of the system of record receiving report. Sampling and quality control follow MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. All technical and quality requirements referenced by 'R' or 'I' numbers are incorporated from the DLA Master List, and the contractor must comply with regulations governing the removal of government identification from non-accepted supplies, physical item marking, and documentation for source approval requests. The contract includes mandatory DFARS clauses on whistleblower rights, antiterrorism training, litigation support restrictions, subcontracting with state sponsors of terrorism, hazard labeling, and payment instructions via WAWF. Offer

Electronic Connector Manufacturing

POSTED

about 22 hours ago

DEADLINE

U.S. Flag Ocean TransportThe contract specifies the ocean transportation of defense supplies using U.S.-flagged vessels, strictly adhering to the Defense Federal Acquisition Regulation Supplement section 252.247-7024, which mandates the use of American-owned and crewed ships for military cargo. The work is to be performed with a primary place of performance in San Diego, California, and falls under the NAICS code 483111 for ocean freight transportation. This is a subcontract opportunity issued by the ASC Commodities Division of the Department of Defense, with responses required by August 13, 2026, and the solicitation posted on August 5, 2026. All transportation services must comply with federal regulations ensuring national security and maritime sovereignty, making vessel ownership, flag status, and crew nationality critical factors in vendor eligibility.

Deep Sea Freight Transportation

POSTED

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls outlined in NIST SP 800-171 to safeguard Controlled Unclassified Information related to defense contracts, ensuring full compliance with DFARS cyber incident reporting obligations. This subcontract is focused on securing Covered Defense Information through the establishment of robust technical, administrative, and physical safeguards aligned with federal standards, with performance specifically tied to the location in San Diego, CA, 92136-3581. The effort is governed under NAICS code 541512, indicating it involves computer systems design and related services, and is issued by the ASC Commodities Division under the Department of Defense. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and must include demonstrated capability to meet all required security controls, maintain compliance over time, and properly report any cyber incidents as mandated by regulation.

Computer Systems Design Services

POSTED

DEADLINE

Packaging and Preservation ServicesThe contract is for packaging and preservation services requiring strict adherence to military standards MIL-STD-2073-1E and MIL-STD-129, ensuring all supplies are securely packaged, preserved, and labeled with compliant barcode systems for defense logistics. This subcontract is managed by the ASC Commodities Division under the Department of Defense, with performance required at a specified location in San Diego, California, with a ZIP code of 92136-3581. The solicitation was posted on August 5, 2026, and responses must be submitted by August 13, 2026, with the NAICS code 561910 indicating it falls under Other Support Activities for Transportation. The work demands precision in material handling and documentation to meet federal military specifications, with all packaging and labeling rigorously verified for compatibility with DoD supply chain systems.

Packaging and Labeling Services

POSTED

DEADLINE