Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on September 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Supply of Moisture Traps (NSN 4730-01-566-0310)

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 423450
New
SLED
Recycling Container Supply
State Health Planning and Development

POSTED

about 6 hours ago

DEADLINE

in 3 days
NAICS: 423450
New
DIBBS
Supply of Automatic Combination Autorefractor, Keratometer, and Non-Contact Tonometer
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 6 days
NAICS: 423450
New
DIBBS
Supply of Trauma Dressings (NSN 6510-01-571-9729)This subcontract involves the supply of sterile trauma dressings for prime contractors supporting Department of Defense medical supply contracts through DLA Troop Support. The specific requirement is for 20 units of NSN 6510-01-571-9729, consisting of black 4-inch by 3-yard bandages with 4-inch by 5-inch sterile, non-adherent foam pads. All items must be delivered in sealed unit containers via common carrier to Fort Bragg. To ensure quality and safety, the contractor must comply with FDA regulations for medical devices and guarantee a minimum shelf life of 36 months upon delivery. The opportunity is categorized under NAICS code 423450 and is managed by the Medical Supply Chain MD Surg FSF.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 6 days
NAICS: 423450
New
DIBBS
Supplier of Permeable Operative-Site DressingsThis subcontract involves the supply of permeable operative-site dressings for prime contractors supporting Department of Defense supply contracts through the Medical Supply Chain MD Surg FSF. The supplier is responsible for providing NSN 6510011621558 dressings measuring 10CM by 14CM, with a total delivery requirement of 6 boxes containing 50 dressings each. All items must be delivered FOB Destination to Camp Lejeune. Strict adherence to technical and quality standards is required, including compliance with MIL-STD-129, RP001, and ASTM D3951 for packaging. Additionally, the supplier must ensure all items are marked according to Medical Marking Standard No. 1 and meet the specifications outlined in the DLA Master List of Technical and Quality Requirements. The response deadline for this opportunity is November 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 6 days
NAICS: 423450
New
DIBBS
Supply of Surgical Drain ValvesThis subcontract involves the supply and delivery of 11 surgical drain valves to prime contractors supporting the Department of Defense Medical Supply Chain. The provided equipment must strictly adhere to NSN 6515-01-690-3796 and meet all DLA quality standards and specified CLIN quantities. Performance for this contract is centered at Fort Bragg. To be eligible for this opportunity, providers must maintain an active SAM registration, a valid CAGE code, and a Unique Entity Identifier. The procurement falls under NAICS code 423450, with a response deadline set for November 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 6 days
NAICS: 423450
New
DIBBS
Supply of Ultraviolet (UV) Disinfectant LightsThis subcontract involves the procurement and delivery of five ultraviolet disinfectant lights for prime contractors supporting Defense Logistics Agency supply contracts. The required equipment must be NSN 4230017111335 and meet the specific technical requirements of Air Science USA LLC part number CA-UV. Performance for this contract will take place in Machesney Park, Illinois. The agreement mandates strict adherence to FAR 52.246-2 inspection standards to ensure quality control and requires compliance with DFARS 252.204-7008 regarding the safeguarding of covered defense information. The procurement falls under NAICS code 423450 and is managed through the Department of Defense.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 11 days
NAICS: 423450
New
DIBBS
Laboratory Beaker SupplierThis subcontract involves the supply of 136 units of laboratory beakers, specifically NSN 6640-01-328-9684 glassware, for prime contractors supporting the Department of Defense Medical Supply Chain. The supplier is required to ensure all items are delivered in sealed unit containers to prevent breakage and must apply markings in accordance with Medical Marking Standard No. 1. Additionally, the provider must certify full compliance with the Buy American Act. The contract stipulates a delivery timeline of 30 days following the order date. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 423450. The procurement process is managed through the Defense Logistics Agency, with a response deadline set for November 5, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 7 days
NAICS: 423450
New
DIBBS
Supplier of Dental Curing Light Barrier Sleeves (VALO GRAND)This subcontract involves the supply of single-use, disposable barrier sleeves specifically designed for VALO GRAND curing lights under DLA Troop Support Medical Supply Chain projects. The contractor is responsible for providing sleeves that meet Medical Marking Standard No. 1 and are compatible with NSN 6520017300057. The scope of work requires the delivery of 10 packages, with each package containing 100 units. Strict adherence to packaging and palletization standards is required, specifically following RP001 and MIL-STD-2073-1E. The contract is managed by the Department of Defense Medical Supply Chain FSH, with the place of performance located at JBER in zip code 99506-3702. The solicitation falls under NAICS code 423450.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 6 hours ago

DEADLINE

in 7 days
NAICS: 423450
New
DIBBS
Supply of Isopropyl Rubbing Alcohol (USP 70%)
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 6 days
NAICS: 423450
New
DIBBS
Sexual Assault Determination Kit SupplierThis subcontract opportunity with the Department of Defense Medical Supply Chain FSH involves the supply and assembly of Sexual Assault Determination Kits, specifically the 15S Fingerstick Version, for prime contractors supporting DLA supply contracts. The supplier is responsible for assembling kits designed for room temperature storage, with each package containing 15 kits and affixed envelopes. All deliverables must strictly adhere to Medical Marking Standard No. 1, MIL-STD-129, and ASTM D3951/IP025 packaging standards. The contract requires full compliance with the Buy American Act and DFARS cybersecurity regulations. Performance will take place in Williamsburg, Virginia, under NAICS code 423450. Interested parties must submit their responses by November 5, 2026, to provide the completed evidence collection kits as specified.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 6 hours ago

DEADLINE

in 7 days
NAICS: 423450
New
DIBBS
Supply of Pulse Oximeters (NSN 6515-01-655-9412)
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 6 days
NAICS: 423450
New
DIBBS
Supply of Adjustable Adult Cervical Supports
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 6 days

AI Contract Overview

Show more

This subcontract involves the supply of 12 moisture traps, specifically King Nutrionics Corporation part number 3731-33-1 under NSN 4730-01-566-0310, for prime contractors supporting DLA supply contracts. The work is managed by the Fluid Handling Division of the Department of Defense and will be performed in New Cumberland. The supplier must ensure all units are packaged and marked according to MIL-STD-129, RP001, and MIL-STD-2073-1E standards. Additionally, the contract requires full compliance with the Buy American Act under DFARS 252.225-7001.

General Info

Supply 12 King Nutrionics moisture traps for DoD in New Cumberland, Buy American compliant.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-398B.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TRAP, MOISTURE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supplies moisture traps for prime contractors delivering DLA supply contracts. Provides NSN 4730-01-566-0310, specifically King Nutrionics Corporation P/N 3731-33-1. Performs marking per MIL-STD-129 and palletization/packaging per RP001 and MIL-STD-2073-1E. Complies with Buy American Act DFARS 252.225-7001. Delivers 12 units of packaged and marked moisture traps.

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332996
New
DIBBS
SEAL, CONICAL, FLARED
Solicitation # SPE7M4-26-T-427F
Solicitation SPE7M4-26-T-427F is a fixed-price procurement issued by the Defense Logistics Agency Fluid Handling Division for 644 copper alloy conical flared seals, identified by NSN 4730-00-932-0957. The contract specifies a delivery window with a need ship date of November 4, 2025, and an original required delivery date of November 29, 2025. Delivery is set as FOB Origin, with the final destination for inspection and acceptance being the DLA Distribution Depot Oklahoma at Tinker AFB. The procurement is subject to strict technical and quality standards, including DLA packaging requirements RP001, marking standards MIL-STD-129, and packaging data MIL-STD-2073-1E. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. The contract incorporates various FAR and DFARS clauses covering cybersecurity, the Buy American Act, and the Berry Amendment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. All quotations must be submitted via the DLA Internet Bid Board System.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 5 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-5688
This contract is a procurement request for 321 units of a metallic tube, identified by NSN 4710012653304, to be delivered to the DLA Distribution San Joaquin facility within 188 days after order. The approved manufacturer or source for these tubes is specified as 66935 007-07270-000. The solicitation is being conducted as a Request for Quote (RFQ) and is only available electronically through the provided link; no hard copies, specifications, plans, or drawings are distributed with the solicitation. All responsible and interested vendors are invited to submit their quotes electronically by the response deadline, ensuring their submissions are timely to be considered. The solicitation is issued by the Defense Logistics Agency (DLA) Land and Maritime office located in Columbus, Ohio, under NAICS code 331210, which pertains to metal tube and pipe manufacturing. The contract type is combined, indicating a possible mix of fixed-price and indefinite delivery terms. Interested parties with questions are directed to contact the buyer via email as detailed in the solicitation document. This opportunity is publicly posted with a response deadline set for February 2, 2026, and the solicitation number SPE7M426T5688 must be used for reference in all communications and quote submissions.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 6 hours ago

DEADLINE

in 5 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-374B
This contract, solicitation number SPE7M4-26-T-374B, is issued by the Department of Defense Fluid Handling Division for the procurement of 63 nonmetallic hose assemblies, identified by NSN 4720015902106 and part number T00076-5083. The delivery is required within 158 days after receipt of order, with an original required delivery date of December 10, 2026, and a need ship date of February 16, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including supply chain traceability documentation per DLAD Procurement Note C03 and identification marking according to MIL-STD-130N. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Additionally, the contract prohibits the use of Class I ozone depleting chemicals and requires compliance with covered defense information regulations. Inspection and acceptance will take place at the destination.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 5 days
View Details
NAICS: 488510
New
DIBBS
U.S.-Flag Ocean Transportation ServicesThis subcontract involves providing U.S.-flag ocean freight transportation services for prime contractors supporting DLA Land and Maritime supply contracts. The primary objective is the transport and delivery of 92 canopy mast assemblies to the port of final discharge, ensuring all operations comply with MARAD and Department of Defense regulations. The contractor is required to provide documented evidence of diligent efforts to secure U.S.-flag vessels and must be rated on the board vessel operating carrier's ocean bills of lading. Managed under the Department of Defense Fluid Handling Division, the project falls under NAICS code 488510. Performance is associated with New Cumberland, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline of November 2, 2026.
Freight Transportation Arrangement

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
Manufacture and Supply of Canopy Mast AssembliesThis subcontract involves the manufacture and supply of 92 canopy mast assemblies for prime contractors supporting Department of Defense DLA Land and Maritime supply contracts. The provider is responsible for producing or sourcing NSN 2040008832002 in strict accordance with the DLA Master List of Technical and Quality Requirements. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332999. To qualify for this engagement, the contractor must possess specialized tooling necessary for assembly production and maintain CMMC Level 2 certification validated by a C3PAO. The solicitation was posted on October 28, 2026, with a response deadline of November 2, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
MAST, ASSY, CANOPY
Solicitation # SPE7M4-26-T-366K
Solicitation SPE7M4-26-T-366K is a small business set-aside request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 92 units of Canopy Mast Assemblies (NSN 2040-00-883-2002). The requirement specifies a delivery period of 146 days after receipt of order, with a need ship date of February 2, 2027, and a final required delivery date of April 19, 2028. Delivery is established as FOB Origin, with the destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract imposes stringent technical and security requirements, including CMMC Level 2 certification and compliance with ITAR or EAR export controls for technical data. Quality assurance is managed through the DLA Master List of Technical and Quality Requirements, with manufacturer inspection systems requiring compliance with SAE AS9003 or ISO 9001. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling. Evaluation for award includes a price preference for HUBZone small businesses and requires offerors to provide components from qualified QPL or QML sources. Invoicing and payment are processed electronically via Wide Area WorkFlow.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 326220
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-373Q
Solicitation SPE7M4-26-T-373Q is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 108 units of air duct hose, identified by NSN 4720015313141 and HDT Expeditionary Systems Inc part number 064-00027. The contract is categorized under NAICS code 326220 and is designated as a small business set-aside. Delivery is required within 214 days after order, with a need ship date of April 11, 2027, and an original required delivery date of June 14, 2027. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California, with inspection and acceptance occurring at the destination. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, specifically referencing RA001 and RQ011 for the removal of government identification from non-accepted supplies. Packaging must adhere to ASTM D3951 and RP001 for palletization, while all marking and labeling must comply with MIL-STD-129. The contract incorporates several FAR and DFARS clauses, including those for basic safeguarding of covered contractor information systems, the Buy American Act, and the safeguarding of covered defense information. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 331420
New
DIBBS
MICEE BAG ASSEMBLY
Solicitation # SPE7M4-26-T-377F
Solicitation SPE7M4-26-T-377F is a federal procurement issued by the Defense Logistics Agency for the supply of one MICEE Bag Assembly, identified by NSN 4710015896794 and part number T00244-5083. The contract is categorized under NAICS code 331420 and requires delivery within 20 days after order. The item is to be shipped FOB Origin to the Distribution Management Office at Camp Pendleton, California, with an original required delivery date of August 27, 2026. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List technical and quality requirements take precedence. Palletization must comply with RP001. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. The procurement is managed by the Fluid Handling Division of the Department of Defense.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332912
New
DIBBS
HOSE ASSEMBLY, METALLIC
Solicitation # SPE7M4-27-T-0166
Solicitation SPE7M4-27-T-0166, issued by the DLA Land and Maritime Fluid Handling Division, is a request for quotation for one metallic hose assembly, identified by NSN 4720-01-286-0227 and part number 34738 from Hyspan Precision Products, Inc. The procurement falls under NAICS 332912 and is intended for delivery to the USNS Laramie (T AO 203) at FPO AE 09577. The required delivery date is September 29, 2026, with a delivery lead time of 20 days after order. Shipping must be handled via the fastest traceable means, specifically excluding parcel post, with FOB Destination terms. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with additional palletization requirements per DLA requirement RP001. Technical and quality standards are governed by the DLA Master List, and the use of additive manufacturing is prohibited unless authorized in writing. Key compliance mandates include the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and a prohibition on the intentional addition of mercury. Inspection and acceptance will occur at the destination per FAR 52.246-2. Invoicing and payment must be processed electronically through the Wide Area Workflow system.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 339999
New
DIBBS
Metal Hose Assembly Manufacturer (NSN 4720-01-547-8193)This subcontract involves the manufacture and supply of 12 specialized metal hose assemblies for prime contractors supporting the Department of Defense Fluid Handling Division. The assemblies must be fabricated in strict accordance with NSN 4720-01-547-8193 and the DLA Master List of Technical and Quality Requirements. Delivery of the completed units is required FOB Origin, with marking and packing adhering to MIL-STD-129 and ASTM D3951 standards respectively. To be eligible, the manufacturer must hold ISO 9001:2015 and JCP certifications, as well as DLA Controlling Authority Authorization. The project falls under NAICS code 339999 and is associated with a performance location in New Cumberland. Interested parties must adhere to the response deadline of October 30, 2026.
All Other Miscellaneous Manufacturing

POSTED

2 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 423830
New
DIBBS
Supply of Fluid Orifice Plate (NSN 4730017015377)This subcontract through the Department of Defense Fluid Handling Division involves the procurement and delivery of one Fluid Orifice Plate, part number 23509-400-1, with NSN 4730017015377. The item must be manufactured and delivered according to Sargent Aerospace and Defense specifications, while strictly adhering to DLA R001 packaging requirements and the DLA Master List of Technical and Quality Requirements. The contract is designated under NAICS code 423830 and requires delivery FOB Origin within 20 days after the order is placed. Performance for this requirement is centered in Mechanicsburg, Pennsylvania.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 326220
New
DIBBS
Supplier of Nonmetallic Medium Pressure Hydraulic HoseThis subcontract involves the supply of rubber-covered, one-wire braid, medium-pressure nonmetallic hydraulic hoses for prime contractors working on Department of Defense Fluid Handling Division projects. The specific requirement is for one Nonmetallic Hydraulic Hose under NSN 4720-01-701-0915, featuring a 2.38 inch inner diameter, a minimum bending radius of 24 inches, and an operating pressure of 350 psi. To ensure quality and safety, the manufacturer must perform burst test certification up to 1400 psi and maintain strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract falls under NAICS code 326220, with the place of performance located at FPO 96678.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

2 days ago

DEADLINE

in about 18 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 423450
Closed
DIBBS
Supplier of Schick Digital Dental Sensor Starter Kits
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 423450
Closed
DIBBS
Supply of Air Filtering Respirator Cartridges (NSN 4240-01-342-2857)
Defense Logistics Agency

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 423450
Closed
DIBBS
Supply of Intravenous Infusion System Connectors
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 423450
Closed
DIBBS
Supplier of Spinal Anesthesia Hypodermic Needles
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 423450
Closed
DIBBS
Supply of EP-4 Sonic Defender Earplugs (Medium)
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 423450
Closed
DIBBS
Supply of Ankle Braces (NSN 6515-01-674-0576)
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 423450
Closed
DIBBS
Supplier of TOA Dynamic Microphones (NSN 5965013711297)
ACTIVE DEVICES DIVISION

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 423450
Closed
DIBBS
Supply of Occlusive Adhesive IV Dressings
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 423450
Closed
DIBBS
Supply of Chlamydia Trachomatis Detection Test Kits
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 423450
Closed
DIBBS
Supply of Urine Analysis Test Strips and Color Charts
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 423450
Closed
DIBBS
Supply of Hospital Oxygen Minilators
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 423450
Closed
DIBBS
Supply of Manikin Resuscitation Training Chest Liners
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS