This Government Contract opportunity from Tennessee was posted on August 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of OSHA-Compliant Full-Body Aerial Lift Harnesses

Closed

State & Local

Submission Closed08/17/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339920

New

SLED

DMA-RFP-361 X-TIC EVOLUTION ACFT LANE SYSTEM

Solicitation # DMA-RFP-361

The Florida Department of Military Affairs is soliciting proposals under solicitation DMA-RFP-361 for the procurement, logo application, and delivery of X-TIC Evolution ACFT Lane systems to various National Guard Armory locations across Florida. The required systems must feature a level, uniform artificial turf surface with a permeable, non-marring, anti-skid base and comply with ATP requirement 7-22.01, C1, page 2-4, Paragraph 2-22 and 2-23. These lanes must provide sufficient space for Preparation Drills and a uniform platform for the Standing Power Throw, Hand Release Push-up, and Plank. The estimated expenditure for this project is approximately 250,000 dollars. Proposals are evaluated based on a 160-point scale, considering general response requirements, qualifications and experience, price per complete lane, and estimated lead time for delivery. The award will be granted to the respondent deemed most advantageous to the state, and short-listed vendors may be subject to site visits and interviews. Mandatory submission documents include a price sheet, vendor references, a drug-free workplace certification, a minimum qualifications statement, and a certification regarding scrutinized companies. Additionally, a cross-reference table is required for a response to be considered responsive. The successful contractor must provide a primary point of contact and maintain public liability, worker's compensation, and commercial blanket bond insurance.

Department of Military Affairs

POSTED

DEADLINE

Cardio and Strength Fitness Equipment

Solicitation # NOI 2026-26PM

The City of Pitt Meadows in British Columbia is seeking proposals for the procurement of cardio and strength fitness equipment under solicitation number NOI 2026-26PM. This pre-solicitation notice outlines the requirement for fitness apparatus to be utilized within the province of British Columbia. Interested parties must submit their responses by the deadline of October 30, 2026. Further details regarding the submission process and specific equipment requirements can be accessed through the official BC Bid portal.

POSTED

DEADLINE

LIFESLED RESCUE BOARDS

Solicitation # R2701275

The County of Hawai'i, through the Hawaii Fire Department, is soliciting quotations under solicitation number R2701275 for the procurement of three LS2 Lifesled Rescue Boards. These specialized boards are designed for high-risk extrication in extreme conditions such as ocean storms, surf rescue, rip currents, floodwater, and ice rescue. Each board must be yellow, measure 74 inches long by 41 inches wide by 4 inches thick, weigh 58 pounds, and feature 10 grab handles, a plastic nose protector, and three points of attachment. The procurement is governed by Chapter 103D, HRS, and the award will be based on best value, considering price, product quality, and the performance and technical capabilities of the vendor. Quotations must be submitted via the OpenGov Procurement Portal by the deadline of October 23, 2026. All bids must be F.O.B. Destination, Freight Prepaid and Allowed, with delivery to 466 Kinoole St, Hilo, HI 96720. Key compliance requirements include providing tax clearance from the Director of Taxation and the IRS, adhering to campaign contribution laws under section 11-355 HRS, and submitting a V-8 form for vendors who have not previously conducted business with the County. For contracts exceeding 25,000 dollars, offerors must also certify compliance with wages, hours, and working conditions pursuant to section 103-55 and 103D-328 HRS. The County retains the final authority to judge vendor capability and product quality during the inspection and acceptance process.

Hawaii Fire Department

POSTED

DEADLINE

V211-27-014 Athletic Apparel Sponsorship

Solicitation # V211-27-014

The Virginia Military Institute is soliciting proposals under solicitation V211-27-014 for a strategic athletic apparel sponsorship partner to serve as the exclusive supplier of uniforms, footwear, training gear, and equipment for all varsity athletic programs. The selected provider will be responsible for product supply, design, customization, branding, inventory management, and distribution fulfillment, while also supporting recruiting, marketing, and fan engagement initiatives. The contract features an initial five-year term with five optional one-year renewals. Proposals must be submitted electronically via the eVA portal by 2:00 PM on October 29, 2026. Award selection is based on the best proposal, evaluated on a 100-point scale considering the financial proposal (40 points), the quality and suitability of products (20 points), the approach and methodology (20 points), and the offeror's qualifications and experience (20 points). The solicitation provides award priority to DSBSD-certified micro, small, women-owned, or minority-owned businesses. Contract administration is managed by the Director of Intercollegiate Athletics, with payment terms set at Net 30 days. All products must adhere to VMI licensing and brand standards, and the contractor must comply with various federal and state anti-discrimination laws and PII confidentiality requirements.

Virginia Military Institute

POSTED

DEADLINE

Solicitation # 4000849999-P23

Solicitation 4000849999-P23 is a request from the Dormitory Authority of the State of New York (DASNY) for a vendor to furnish, deliver, install, and provide training on the installation of a sideline tarp for York College. The contract is awarded based on a grand total lump sum price, though DASNY may also consider the lowest bid per item or a best value proposal. Bidders must be responsive and responsible, providing comprehensive technical documentation including manufacturer model numbers, cut sheets, construction and installation specifications, warranty information, and any deviations from the required materials or dimensions. The successful vendor must comply with New York State Labor Law regarding prevailing wage rates and adhere to various certifications, including the Omnibus Procurement Certification and the Contractor ST-220 for contracts exceeding 100,000 dollars. While MWBE and SDVOB goals have been waived for this procurement, bidders must still comply with NYS Executive Law Articles 15-A and 17-B. The project is excluded from the Project Labor Agreement (PLA). Performance begins upon issuance of the Purchase Order, and the vendor is required to provide a minimum one-year warranty on all work. All inquiries are directed to Madeline Miller.

Dormitory Authority of the State of New York

POSTED

DEADLINE

REBID - York College-Furnish, Deliver, Install and Provide Training on Installation of Sideline Tarp.

Solicitation # 2139994

The Dormitory Authority of the State of New York (DASNY) has issued solicitation number 2139994 for a one-time purchase to furnish, deliver, install, and provide installation training for a sideline tarp at CUNY York College, located at 9420 Guy R Brewer Blvd, Jamaica, New York. The solicitation was posted on October 16, 2026, with a response deadline of November 13, 2026. Interested bidders must access all related documents and addenda via the Bid Express service. All domestic and foreign bidders are required to comply with New York State business registration requirements. Furthermore, this procurement is subject to strict communication restrictions under State Finance Law sections 139-j and 139-k; any unauthorized contact between offerors and Dormitory Authority personnel may result in disqualification. Madeline Miller serves as the Procurement Administrator and primary point of contact for this action.

Dormitory Authority of the State of New York

POSTED

DEADLINE

Monterey Golf Range Technology

Solicitation # NAVMWR-27-R-0001

Solicitation NAVMWR-27-R-0001 is a negotiated design-build project issued by the Commander Navy Installations Command for the renovation and expansion of the driving range at NSA Monterey in California. The project aims to meet increased customer demand by repairing existing bays and constructing a new two-story, 24-bay covered range structure equipped with weather-resistant lighting and ceiling fans. Additional infrastructure includes a 440-square-foot range building, a 500-square-foot concession building with restrooms, a concrete cart path extension from the 9th hole, and the extension of the driving range length by approximately 30 yards. A key component of the project is the installation of a golf range technology system for interactive virtual golf and ball flight tracking, along with 150 linear feet of high-impact range netting. The contract will be awarded based on a best-value tradeoff method, weighing price equally against technical factors including the proposed design solution, qualifications and experience, and the project execution method. Total available funds for design and construction are approximately 3.94 million dollars, with an estimated construction cost of 3.99 million dollars excluding furniture and portable equipment. Proposals must be submitted in two separate volumes, Technical and Price, with a response deadline of November 20, 2026. The awarded contractor must provide a qualified Chief of Construction Quality Control with at least 10 years of experience and adhere to strict federal, state, and local codes, including the Davis-Bacon Act and the Architectural Barriers Act.

Commander Navy Installations Command

POSTED

DEADLINE

Playground Equipment SupplierThis subcontract agreement involves the supply and delivery of two complete outdoor playground units for prime contractors working on Richmond County Board of Education facility projects in Georgia. The selected supplier is responsible for manufacturing steel and aluminum components in accordance with ASTM A-315 and A-500 standards, as well as producing rotationally molded HDPE plastic panels. All metal components must be finished with zinc galvanized and powder coatings to ensure durability. To ensure safety and accessibility, all equipment must hold IPEMA certification and maintain full compliance with ADA 1990 standards. The scope of work concludes with the delivery of the two complete equipment sets directly to the project site. Interested parties must respond by November 9, 2026.

Richmond County Board of Education

POSTED

DEADLINE

FREEDOM PARK PLAYGROUND EQUIPMENT & POURED RUBBER SAFETY SURFACING; RFP#26-216

Solicitation # RFP #26-216

RFP #26-216 is a solicitation issued by the Richmond County Board of Education for the delivery and installation of playground equipment and poured rubber safety surfacing at Freedom Park K-8 School in Fort Gordon, Georgia. The project requires the provision of two playgrounds that comply with the Americans with Disabilities Act of 1990 and IPEMA certifications. All equipment must meet rigorous material standards, including specific ASTM specifications for steel, aluminum, and UV-stabilized plastics, while shade canopies must be engineered to withstand wind speeds of 90 MPH. The awarded vendor must complete all delivery and installation within 90 days of the award notification, which is anticipated for November 17, 2026. Proposals are due by November 9, 2026, at 3:00 p.m. EST and must be submitted as a sealed package containing one hard copy and one digital copy on a labeled USB flash drive. Required documentation includes a detailed pricing sheet, equipment lists, product specifications, warranties, and technical drawings in .dwg format. Bidders must provide proof of product liability insurance of at least 5 million dollars, as well as workers compensation and general liability coverage of 1 million dollars each. Additionally, the contractor must ensure installation is performed by a certified Playground Safety Inspector and comply with Georgia state mandates regarding E-Verify and annual criminal history checks. Award selection will be based on the most qualified responsive bidder offering the best overall value and product quality.

Richmond County Board of Education

POSTED

DEADLINE

Fitness Equipment SupplierThe Fitness Equipment Supplier subcontract involves providing both indoor and outdoor fitness equipment for prime contractors working on Oregon Procurement Services projects. The scope of work includes the sourcing and delivery of commercial-grade fitness machinery and weather-resistant outdoor exercise stations, with the supplier responsible for delivering the completed equipment. This opportunity is managed by the state of Oregon under Procurement Services, with the place of performance located in Salem, Oregon. The solicitation was posted on October 9, 2026, and requires responses to be submitted by the deadline of October 30, 2026.

POSTED

DEADLINE

Request for Information Only for Parks and Recreation Equipment and Installation

Solicitation # S-10700-00018166

The State of Oregon, through the Department of Administrative Services Procurement Services, has issued an informal Request for Information (S-10700-00018166) to gather industry feedback regarding parks and recreation equipment and installation. This RFI is intended solely for market research to aid in the development of future competitive solicitations and will not be evaluated for contract awards. The state is seeking data on the provision and installation of equipment, including related services such as site cleanup, demolition, disposal, site inspections, and repairs. The state is specifically requesting information on industry alignment with the Consumer Product Safety Commission Public Playground Safety Handbook, current ADA accessibility guidelines for playgrounds, and industry minimums for fall attenuation and impact-absorption surfacing. Interested parties must submit concise electronic responses without marketing materials by October 30, 2026, using the designated yellow text boxes in the provided document via OregonBuys. Primary contact for this inquiry is Kaliska King.

POSTED

DEADLINE

Physical Education and General Athletics Equipment SupplierThis subcontract opportunity is for a Physical Education and General Athletics Equipment Supplier to support prime contractors on projects for Hampton City Schools in the City of Hampton, Virginia. The selected supplier will provide a comprehensive catalog of PE supplies, including mats, cones, nets, and balls, which will be furnished on an as-needed basis. All provided athletic gear must be new, free of defects, and compliant with established industry standards. The solicitation was posted on October 7, 2026, with a response deadline of October 29, 2026. Operating under NAICS code 339920, the contract encompasses both the procurement and delivery of the required equipment to ensure the successful execution of school athletic projects.

Hampton City Schools

POSTED

15 days ago

DEADLINE

in 7 days

AI Contract Overview

Nashville Electric Service is seeking a subcontractor for the supply of 10 H-style, full-body aerial lift harnesses. The required equipment must be constructed from 3 inch nylon webbing and strictly adhere to ASTM and OSHA safety standards. To ensure compliance, only two specific manufacturer part numbers are acceptable: BUCKNGHM U64A23H6E00 or BASHLIN 662AD-O. The procurement is categorized under NAICS code 339920 with the place of performance located in Nashville. Interested parties must submit their responses by the deadline of August 17, 2026, at 7:00 PM.

General Info

Nashville Electric Service seeks 10 OSHA-compliant aerial lift harnesses by August 17, 2026.

Agency

Tennessee → Nashville Electric Service

NAICS

339920 - Sporting and Athletic Goods Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

This scope was carved out of Z4965.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Lift Harness

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 10

subcontract

Response DeadlineAug 17

Deadline has passed

Submission Closed

08/17/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTennessee → Nashville Electric Service

ContactsNo contacts available

OfficeN/A

Organization / AgencyTennessee → Nashville Electric Service

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of 10 units of H-style, full-body aerial lift harnesses made from 3" nylon webbing, meeting ASTM and OSHA standards. Only two approved manufacturer part numbers: BUCKNGHM U64A23H6E00 or BASHLIN 662AD-O.