Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Polyurethane Coating (NSN 8010015754987)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement and delivery of four boxes of military-spec polyurethane coating identified by NSN 8010015754987, with no installation, application, or related services included. The item is classified under NAICS code 325510, indicating it falls within the paints and coatings manufacturing sector, and is being sourced through a subcontract under the Defense Logistics Agency within the Department of Defense. The solicitation was posted on July 17, 2026, and the place of performance and specific office details are not provided, though the contract is linked to the DIBBS system for award documentation. The requirement is strictly for the supply of the specified coating material in the designated quantity, with no additional service obligations on the vendor.

General Info

Procurement of four boxes of military polyurethane coating, NSN 8010015754987, no installation or services included.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325510 - Paint and Coating ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of 4 boxes of military-spec polyurethane coating identified by NSN 8010015754987. No installation or application services are required.

Similar Contracts

Same NAICS industry code

FY26-DDOT-TSA-GtechnicThe contract titled FY26-DDOT-TSA-Gtechnic is a forecasted procurement issued by the District of Columbia Department of Transportation, indicating a planned acquisition for the fiscal year 2026 under the Transportation (DDOT) agency. The solicitation is currently in the forecasting phase with no assigned solicitation number, indicating it is not yet active for bidding. The contract is linked to Gtechnic, suggesting the intent to procure products or services related to surface protection technologies, likely for vehicle or infrastructure maintenance. There is no specified set-aside classification, NAICS code, or organizational type, and the point of contact details are unpopulated, leaving key logistical and compliance information pending further documentation. The place of performance details including city, state, and zip code are not provided, and no office address is listed, implying the delivery scope is still under evaluation. Potential vendors are advised to monitor the official portal for updates, as this forecast may soon evolve into a formal solicitation.

Transportation (DDOT)

POSTED

about 11 hours ago

DEADLINE

Polyurethane Coating Supply (Material Only)The contract is for the supply of bulk polyurethane coating material identified by NSN 8010013803282, which must fully comply with MIL-PRF-85285E/F specifications. The material is required to have a minimum 12-month shelf life and must be packaged appropriately to ensure integrity during storage and transport. All packaging and containers must be labeled in accordance with GHS guidelines to meet global hazard communication standards. This is a subcontract opportunity issued under NAICS code 325510, indicating the nature of the business involves paint and coating manufacturing. The performance location is designated as Tracy, California with a zip code of 95304-5000. The solicitation was posted on July 22, 2026, and responses are due by July 28, 2026, with the award expected to be managed by the DLA San Joaquin office under the Department of Defense.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Sealing Compound Manufacturer / SupplierThe contract requires the manufacture and supply of a two-part military-spec sealing compound in specified kit sizes, ensuring full compliance with federal and military standards for hazardous materials handling and packaging. The product must meet precise technical and safety requirements to support defense operations, with packaging and labeling aligned with regulatory protocols for transportation and storage of hazardous substances. The sealing compound is intended for critical military applications where performance under extreme conditions is essential. The solicitation is issued under NAICS code 325510 and is classified as a subcontract through the Defense Logistics Agency San Joaquin, with performance centered at Tracy, California, zip code 95304-5000. Bidders must submit responses by the deadline of July 28, 2026, and the opportunity is open to qualified suppliers capable of meeting the military-grade specifications without set-aside restrictions. The contract emphasizes reliability, adherence to technical standards, and compliance with defense logistics requirements for hazardous materials, with all fulfillment expected to originate from a certified manufacturing source capable of consistent high-volume production.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of Enamel (NSN 8010-00-801-5004)The contract calls for the procurement and delivery of four packages of Type II shelf-life enamel identified by NSN 8010-00-801-5004, with each package required to have at least 85 percent of its original shelf life remaining at the time of delivery. The enamel must fully comply with all applicable military specifications and hazardous material handling standards to ensure safety, performance, and regulatory adherence throughout transportation and storage. This requirement underscores the importance of quality control and proper inventory management to meet operational readiness needs. The contract is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with performance expected at Minot Air Force Base, North Dakota, ZIP 58705-5001. It was posted on July 22, 2026, and responses are due by July 28, 2026, indicating a short turnaround timeframe for potential suppliers. The NAICS code 325510 classifies this procurement under the paint and coating manufacturing sector, signaling that only qualified manufacturers or distributors with proven capability in defense-grade coatings are eligible to respond. The solicitation is accessible via the DIBBS platform, though no specific point of contact or set-aside status is provided.

Defense Logistics Agency

POSTED

DEADLINE

Polyurethane Coating Manufacturing and FormulationThe contract involves the manufacture of a two-component polyurethane coating formulated to meet the stringent military specification MIL-PRF-85285F, with a designated color matching FED-STD-595 color 36251 and a volatile organic compound content not exceeding 420 grams per liter. The coating must be packaged in aerosol cans and produced to ensure consistent performance, durability, and compliance with environmental and technical standards required by the Department of Defense. All materials and processes must adhere to the specified regulatory and quality benchmarks to ensure suitability for military applications. The solicitation is issued as a subcontract under NAICS code 325510 for chemical manufacturing, with a response deadline of July 28, 2026, and a posting date of July 22, 2026. Performance is required at Tracy, California, with a zip code of 95304-5000, and the contracting activity is managed by DLA Dist San Joaquin. The supplier must be prepared to deliver fully compliant product meeting all technical, packaging, and environmental conditions without deviation, and the procurement is part of broader Department of Defense logistics and supply chain efforts.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Specialty Coating Supplier (Enamel Paint Manufacturing & Formulation)The contract requires the manufacture and supply of eight quarts of exterior flat enamel paint that complies with MPI #8 and SAE AMS-STD-595 36231 Gray specifications, and must be sourced exclusively from a manufacturer approved by MPI. The paint is intended for specialized coating applications and must meet strict military and industrial standards for durability, finish, and color consistency. The solicitation is categorized as a subcontract under NAICS code 325510, indicating it falls within the paint and coating manufacturing sector, and is issued by the DLA Dist San Joaquin under the Department of Defense. The opportunity was posted on July 22, 2026, with a response deadline of July 28, 2026, indicating a narrow window for submissions. The place of performance is designated as Tracy, California, with a zip code of 95304-5000, suggesting delivery or production logistics are centered in this location. The contract is not subject to any specific set-aside classification, meaning it is openly available to qualified subcontractors. The UI link directs to the DIBBS portal where detailed solicitation documents and submission requirements can be accessed, though no point of contact is listed in the data provided.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Polyurethane Coating Manufacturing & FormulationThe contract requires the manufacture and formulation of a polyurethane coating that meets stringent military standards including MIL-STD-2073-1E for packaging and storage and MIL-STD-129 for labeling and marking of military supplies. Compliance with OSHA hazard communication guidelines is mandatory, requiring proper labeling, employee training, and the provision of accurate Safety Data Sheets for all batches produced. The coating must be formulated to ensure durability, environmental resilience, and consistent performance under military operational conditions. All production must adhere to the specified technical and documentation requirements without deviation. The procurement is structured as a subcontract under the NAICS code 325510 for paint and coating manufacturing, managed by the Defense Logistics Agency under the Department of Defense. The place of performance is designated as Jacksonville with a ZIP code of 28545-6070, though the physical location is not fully detailed. The solicitation was posted on July 22, 2026, with responses due by July 28, 2026. Interested parties must submit proposals through the DIBBS platform using the reference number SPE8ES26T2428, and all deliverables must be fully aligned with federal defense supply chain requirements for materials, documentation, and traceability.

Defense Logistics Agency

POSTED

DEADLINE

Fiberglass Stain Remover SupplyThe contract is for the supply of a specialized rust-removal chemical formulation designed for use on fiberglass surfaces, with strict compliance required for hazardous material handling and environmental safety standards. It is structured as a subcontract under a Total Small Business Set-Aside, indicating that only small business concerns are eligible to respond, in accordance with SBA regulations and FAR 19.5. The North American Industry Classification System code 325510 identifies the scope as related to paint and coating manufacturing, aligning the product with industrial chemical production. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026. The place of performance is specified as Tracy, California, with a ZIP code of 95304-5000, and the procuring agency is the DLA Dist San Joaquin under the Department of Defense. The contract requires adherence to federal safety and environmental protocols, emphasizing the need for a formulation that meets rigorous regulatory benchmarks while maintaining efficacy for its intended application. All bids must comply with the small business set-aside conditions and demonstrate capacity to deliver the specialized chemical solution to the designated location within the prescribed timeframe.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Polyurethane Coating Formulation and ManufacturingThe contract involves the formulation and manufacturing of a high-solids, low-VOC polyurethane coating specifically designed for aircraft applications, requiring strict adherence to MIL-PRF-85285 and QPL-85285-7 specifications. The coating must meet rigorous performance standards for durability, chemical resistance, and environmental compliance, ensuring suitability for military aviation use while minimizing volatile organic compound emissions. The work is scoped as a subcontract under the NAICS code 325510, indicating focus on paint and coating manufacturing, and is procured by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 22, 2026, with a firm response deadline of July 28, 2026, indicating a tightly paced procurement cycle. The place of performance and point of contact details are not specified, but the work is expected to align with federal defense manufacturing requirements. Interested parties must submit proposals through the DIBBS portal, and success will require demonstrated capability in producing coatings that satisfy military-grade technical and environmental benchmarks without reliance on traditional high-VOC formulations.

Defense Logistics Agency

POSTED

DEADLINE

Chemical Formulation and Manufacturing of Paint RemoverThe contract is for the manufacture of a specialized paint remover designed to meet stringent military and regulatory standards including MIL-STD-147F, ASTM D3359, and FED-STD-313F, ensuring performance, safety, and compliance in defense applications. The work involves precise chemical formulation and scaled production tailored to specifications required by defense operations, with the final product intended for use in military maintenance and restoration environments. The submission deadline is July 28, 2026, with the solicitation posted on July 22, 2026, and the contract classified as a subcontract under NAICS code 325510 for industrial chemical manufacturing. The performance location is set in Tracy, California, with a ZIP code of 95304-5000, and the contracting authority is DLA Dist San Joaquin under the Department of Defense. The procurement is not subject to any set-aside designation, indicating it is open to all qualified vendors. The project does not include a designated point of contact in the provided details, but the official solicitation can be accessed via the DIBBS portal at the provided URL. All parties must adhere to federal defense manufacturing protocols and deliver a product that consistently meets the established technical benchmarks for effectiveness and environmental safety.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supplier of Ready-Mix or Specialty Chemical FormulationsThe contract seeks a supplier to provide defense-compliant chemical products including coatings, cleaners, and solvents that meet military and federal specifications, with full responsibility for formulation, testing, and certification. The effort is classified as a subcontract under NAICS code 325510 and is managed by DLA DIST SAN JOAQUIN under the Department of Defense, with performance required at Tracy, California, 95304-5000. The solicitation was posted on July 22, 2026, and responses are due by July 28, 2026, with all materials expected to adhere to stringent defense standards for quality, durability, and regulatory compliance. The supplier must demonstrate proven capability in producing chemically complex formulations that support military operations, with documentation to verify adherence to applicable technical and certification requirements.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

POLYURETHANE COATINGThis contract specifies the procurement of polyurethane coating in accordance with MIL-PRF-85285E, Type 2, Class H, designed for support equipment applications with a maximum VOC content of 340 grams per liter. The coating is a two-component system consisting of Component A, a pigmented polyester resin and solvent, and Component B, a clear aliphatic isocyanate, supplied as a set totaling two quarts per unit. The finished coating must be gloss gray, conforming to Fed-Std-595 Color Number 16473. The product carries a shelf life of twelve months, extendable under RS001 requirements, and must be labeled with the NSN 8010-01-380-3282 and a lot or batch number per MIL-STD-129. The order quantity is two kits, with delivery required 173 days after order placement. Suppliers must comply with all applicable technical and quality requirements referenced in the DLA Master List, including packaging, labeling, and removal of government identification from non-accepted supplies. Compliance with the updated OSHA Hazard Communication Standard is mandatory, requiring submission of Safety Data Sheets formatted per 29 C.F.R. 1910.1200 and compliant hazard communication labels prior to award. Employee training on these updated safety procedures is required. The product is subject to Covered Defense Information requirements, and all documentation must adhere to the solicitation SPE8ES-26-T-2414, issued on July 22, 2026, with a response deadline of July 28, 2026. The contract is managed by DLA Dist San Joaquin, with performance located in Tracy, California, and inquiries directed to Stephen Ockenhouse at dla-ts-fceb.inquiry@dla.mil.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Government Delivery & Transportation (FOB Destination)The contract requires the coordination and timely execution of transportation for a packaged valve to FPO AE 09514 aboard the USS WASP LHD 1, with delivery mandated within twenty days of order receipt. All shipping activities must strictly comply with military transportation standards and invoicing protocols to ensure full adherence to Department of Defense regulations. The performance location is designated as a military fleet post office address, indicating delivery to a U.S. naval vessel operating in a deployed or overseas capacity, and the contractor must account for the unique logistical constraints of military maritime operations. This is a subcontract under the Defense Logistics Agency, classified under NAICS code 488999 for other support activities in transportation, and is solicited under the FOB Destination term, meaning the seller bears all costs and risks until the item reaches the specified military destination. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and all contractual obligations must align with the government’s procurement and accountability systems. While no specific set-aside or small business designation is indicated, full compliance with military shipping documentation, tracking, and delivery confirmation processes is essential for contract fulfillment.

All Other Support Activities for Transportation

POSTED

DEADLINE

Hazardous Materials Compliance & LabelingThis contract requires strict compliance with hazardous materials regulations, specifically enforcing 29 CFR 1910.1200 for hazard communication and MIL-STD-129 for uniform labeling of military materiel. A critical requirement is the verification that no mercury or mercury-containing components are present in any delivered items; if mercury cannot be entirely excluded, the contractor must implement robust containment measures and apply precise labeling to ensure safe handling and transport. The work is scoped as a subcontract under NAICS code 541620, indicating a focus on scientific and technical consulting services related to hazardous materials management. Performance is to be executed at FPO with a zip code of 09514, pointing to a military overseas location, and all deliverables must align with Department of Defense standards. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and is managed by the Defense Logistics Agency under the Department of Defense.

Environmental Consulting Services

POSTED

DEADLINE

Military Packaging and Palletization ServicesThe contract requires comprehensive military packaging and palletization services in full compliance with MIL-STD-2073-1E standards, encompassing dry cleaning of materials, air environment sealing to protect against moisture and contaminants, and secure packaging for long-term storage and transit. All work must meet the specific packaging and handling requirements defined by DLA RP001 for palletization, ensuring uniformity, stability, and ease of handling during transport. The service scope is designed to support the secure delivery of sensitive or mission-critical equipment to a naval vessel operating in a maritime environment, where exposure to salt air and extreme conditions demands rigorous protective measures. The services are to be performed under a subcontract agreement issued by the Defense Logistics Agency under the Department of Defense, with the place of performance designated as FPO 09514, indicating shipment to a vessel at sea. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, and is classified under NAICS code 493190 for other warehousing and storage. All subcontractors must demonstrate proven capability in military-grade packaging, adherence to federal standards, and experience handling defense logistics requirements, ensuring that every item is properly prepared, sealed, and palletized to maintain operational readiness upon arrival at the naval destination.

Other Warehousing and Storage

POSTED

DEADLINE

Safety Relief Valve Supply (Bronze Body, Monel Trim)The contract calls for the supply of a single safety relief valve featuring a bronze body and Monel trim, explicitly meeting the National Stock Number NSN 4820-01-213-1532 and adhering to all applicable military standards for packaging and handling of hazardous materials. The item is subject to strict compliance requirements ensuring performance, durability, and safety under defense-grade operational conditions. The procurement is structured as a subcontract under the NAICS code 332912, indicating the manufacturing focus on other fabricated metal product manufacturing. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and the place of performance is designated as FPO with ZIP code 09514, suggesting delivery to a military postal location. The contracting agency is the Defense Logistics Agency under the Department of Defense, indicating this is part of a broader defense supply chain effort. The contract’s official reference and detailed submission guidelines are accessible via the provided DIBBS portal link.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Quality Assurance & Inspection SupportThis contract provides for quality assurance and inspection support under a fixed-price arrangement governed by FAR 52.246-2, requiring rigorous verification of product attributes classified as critical, major, and minor using accepted acceptance quality levels and defined verification protocols. The work is to be performed at a military post office location with zip code 09520, and the contractor must ensure compliance with federal acquisition regulations through systematic inspection processes aligned with industry-standard sampling procedures. The effort supports the Defense Logistics Agency under the Department of Defense and is classified under NAICS code 541330, indicating professional, scientific, and technical services related to engineering and technical consulting. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, and is structured as a subcontract opportunity, with no set-aside designation specified.

Engineering Services

POSTED

DEADLINE

Domestic and International Shipping to FPO AddressThis contract requires the delivery of goods to the USS ABRAHAM LINCOLN CVN 72 at the FPO AE 09520 address under FOB Destination terms, meaning ownership and risk transfer only upon arrival at the final military destination. All shipments must comply with Defense Federal Acquisition Regulation Supplement (DFARS) shipping specifications, which include proper labeling, documentation, and adherence to military logistics protocols. Proof of delivery is mandatory and must be provided to confirm successful receipt by the designated naval vessel. The solicitation is classified as a subcontract under NAICS code 488999 for other support activities related to transportation, and it is managed by the Defense Logistics Agency under the Department of Defense. The offer deadline is August 3, 2026, with the opportunity posted on July 22, 2026, and performance is entirely focused on servicing the FPO address associated with the aircraft carrier.

All Other Support Activities for Transportation

POSTED

DEADLINE

Hazard Communication Compliance & SDS ManagementThe contract requires the preparation and submission of Safety Data Sheets and hazard labels specifically for lead-acid batteries, ensuring full compliance with OSHA and federal hazard communication standards. The work must align with the latest regulatory requirements to accurately convey chemical hazards, handling instructions, and emergency response procedures for users and responders. All documentation must be technically precise, consistently formatted, and verified to meet federal mandates for workplace safety and transport compliance. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a place of performance listed as FPO 09520. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026. The NAICS code 541690 indicates the work falls under other scientific and technical consulting services, suggesting a focus on regulatory expertise rather than manufacturing. The contract does not specify a set-aside status and lacks detailed point of contact information, indicating that interested parties should reference the provided DIBBS portal link for further submission guidelines and technical requirements.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Hazardous Materials Packaging and MarkingThe contract requires specialized packaging and labeling of lead-acid batteries in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all hazardous materials are documented, marked, and prepared for military logistics and storage. A key requirement is the application of Type I shelf-life identification code 32, which specifies the storage duration and expiration timeline for the batteries, critical for operational readiness and safety. The work must be performed in accordance with defense regulations governing hazardous material handling, with all external markings and documentation meeting exact military specifications for identification, handling warnings, and traceability. The contract is classified as a subcontract under NAICS code 561990 and is managed by the Defense Logistics Agency under the Department of Defense. The place of performance is designated as FPO with ZIP code 09520, indicating delivery to a military postal facility, likely for overseas or expeditionary use. Responses are due by August 3, 2026, with the solicitation posted on July 22, 2026, giving potential bidders approximately two weeks to prepare submissions. The contract is not set aside for any specific small business categories and is open to any qualified subcontractor capable of meeting the rigorous packaging, labeling, and compliance standards for military-grade hazardous materials.

All Other Support Services

POSTED

DEADLINE

Lead-Acid Battery Supply (Type I Shelf-Life)The contract is for the supply of 33 to 130 Type I lead-acid storage batteries with a strict 12-month non-extendable shelf life, ensuring compliance with military and hazardous materials standards. All units must meet rigorous performance and safety criteria as required by defense regulations, and the delivery schedule is aligned with operational needs dictated by the Department of Defense. The solicitation is issued as a subcontract under NAICS code 335910, which classifies the industry as Other Battery Manufacturing, and procurement is managed by the Defense Logistics Agency through the DIBBS platform. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, leaving bidders a limited window to submit proposals. The place of performance is designated as FPO 09520, indicating delivery to a military postal address, likely for overseas or deployed operations. No set-aside provisions are specified, and the contract does not include a point of contact, suggesting standardized submission procedures through the DIBBS portal. Failure to meet the shelf-life requirement or noncompliance with hazardous materials protocols will result in rejection, emphasizing the critical nature of adherence to technical and regulatory specifications.

Battery Manufacturing

POSTED

DEADLINE

Radioactive Materials Notification and Compliance (If Applicable)This contract requires compliance with radiological testing and reporting protocols for enamel materials that may contain trace radioactive substances exceeding established thresholds. The contractor must conduct appropriate testing to detect any radioactive contamination and ensure all affected items are properly labeled in accordance with MIL-STD-129 standards. Failure to meet these requirements could result in non-compliance and rejection of deliverables. All findings and actions taken must be formally documented and reported directly to the Contracting Officer to maintain regulatory adherence and contractual obligations. The contract pertains to work to be performed at Minot Air Force Base, North Dakota, under a subcontract solicitation issued by the Defense Logistics Agency, a branch of the Department of Defense. The North American Industry Classification System code 541380 indicates the nature of the work involves scientific and technical consulting services. The solicitation opened on July 22, 2026, with a rigid response deadline of July 28, 2026, emphasizing timely submission. While specific point of contact details are not provided, the contract is accessible through the DIBBS platform and applies to subcontractors delivering enamel materials subject to radiological controls.

Testing Laboratories and Services

POSTED

DEADLINE

Hazardous Materials Transportation and LogisticsThe contract specifies the transportation of hazardous enamel to Minot Air Force Base under FOB DESTINATION terms, meaning the vendor assumes full responsibility for all freight costs and the risk of loss until the material is successfully delivered to the destination. This includes comprehensive logistics management to ensure compliant handling, secure transit, and timely arrival of the hazardous material in accordance with federal regulations for dangerous goods. The vendor must maintain control over the shipment throughout the entire journey and bear all financial and operational liabilities until official receipt at Minot AFB. The solicitation, issued under NAICS code 484220 for specialized truck transportation, is part of a subcontract under the Defense Logistics Agency within the Department of Defense. The opportunity was posted on July 22, 2026, with a response deadline of July 28, 2026, indicating a short yet critical window for qualified carriers to submit proposals. Performance is mandated exclusively at Minot AFB with ZIP code 58705-5001, requiring precise coordination with military logistics protocols. All parties must be fully prepared to meet stringent safety, documentation, and environmental compliance standards expected for transporting hazardous materials to a federal defense installation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires the provision of fully compliant packaging, labeling, and documentation for hazardous enamel shipments in accordance with military standards, with strict adherence to Special Marking Code 33 and full lot traceability throughout the supply chain. All materials must meet stringent regulatory requirements for handling, storage, and transport of hazardous substances, ensuring safety and compliance at every stage from preparation through delivery. The work must be performed to support military logistics operations, with packaging and labeling systems that enable rapid identification, inspection, and accountability of hazardous contents. Performance is required at Minot Air Force Base, North Dakota, with a response deadline of July 28, 2026, and the contract is classified as a subcontract under NAICS code 561910. The contracting authority is the Defense Logistics Agency within the Department of Defense, and all deliverables must align with government-mandated specifications for hazardous material handling. Contractors must demonstrate capability in managing regulated materials under military protocols and maintaining complete documentation for audit and traceability purposes. Failure to meet these requirements may result in rejection of shipments and contract non-compliance.

Packaging and Labeling Services

POSTED

DEADLINE