This Government Contract opportunity from Government of Canada was posted on May 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Pressure Gauges (OEM or Equivalent)

Closed

Canada

Submission Closed05/29/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334519

New

Federal

Notice of Intent to Sole Source to Agilent Technologies, Inc.The Department of the Navy, through the Naval Information Warfare Center Pacific, intends to award a firm-fixed-price purchase order on a noncompetitive basis to Technical Communities d.b.a. Test Mart as the authorized reseller of Agilent Technologies, Inc., for two specific items: a mobile helium leak detector in MD30 configuration with a 30m³/hr dry scroll pump (Part Number G8611B) and a power probe sniffer with a 10-foot hose and KF-25 fitting (Part Number K9565306), each in a quantity of one. This procurement is justified under FAR 12.102 due to the determination that only one responsible source exists capable of meeting the agency's technical and performance requirements without unacceptable risk to quality, performance, or schedule. A redacted Justification for Non-Competitive Procurement has been prepared and supports the decision not to solicit competitive bids. Although this notice is not a request for competitive quotations, interested parties may submit capability statements demonstrating their ability to fulfill the requirements, provided they are registered in the System for Award Management with active UEI and CAGE Code numbers. All submissions must be sent via email to Kylie Nevells at kylie.m.nevells.civ@us.navy.mil no later than 0900 Pacific time on June 29, 2026; phone or fax inquiries will not be accepted. This notice is purely anticipatory and non-binding, and the government retains full discretion to proceed or not proceed with the award based on responses received.

POSTED

DEADLINE

Next Gen High Pressure Cold Spray SystemThis solicitation, FA813226Q0029, seeks a complete Next Generation High-Pressure Cold Spray System as a brand-name, all-or-nothing requirement under a 100% Small Business Set-Aside with NAICS code 334519, limited to organizations with fewer than 600 employees. The system must include exact, unmodified components specified in the Statement of Work: Impact Innovation EvoCSII Cold Spray Machine configured for Helium and Nitrogen with dual powder feeders and nozzle cooling; a Fanuc M-710iC/50 Industrial Robot with all listed options; a 99.999% pure nitrogen supply system with 3600psig output, outdoor-rated and telemetry-enabled; an Argon fire suppression system compliant with NFPA 484 and NFPA 2001; HiWatch HR2 Particle Measurement System; ReliaCoat ICP-8 In-Situ Sensor; dust handler with spark arrester and blast venting; high-pressure gas plumbing; ancillary equipment; system integration; installation; and training. Substitutes or equal items are strictly prohibited. The offeror must provide full lifecycle support as supplier, installer, integrator, and trainer, and must include all site work and foundation assessments as outlined. The procurement uses RFO 12 simplified procedures with no RFO 15 applicability, and award will be made on a Lowest Price Technically Acceptable basis, where technical acceptability is a pass/fail gate determined by compliance with all technical specifications, brand-name adherence, and completeness of submission. Technical documentation is capped at 100 pages in Word, Excel, or PDF format, and quotations must be submitted by noon CDT on July 23rd, 2026; late submissions will not be accepted. The offeror must maintain an active and complete SAM.gov profile with verified NAICS 334519 registration and provide CAGE Code and UEI. Installation may be delayed up to 18 months pending Tinker AFB Civil Engineering approval of infrastructure modifications. The system must be delivered FOB Destination to Tinker AFB, OK 73145, with no separate freight charges allowed. Upon delivery, equipment must bear IUID plates per MIL-STD-130N with mandatory HRI and MRI data elements, including nomenclature, cage code, manufacturer, model, serial number

POSTED

DEADLINE

SPE4A626RXA78, 6680-011147653, Tachometer, Mechanical, Fixed MountingThe U.S. Department of Defense, through DLA Aviation, is seeking information on potential manufacturers capable of producing the mechanical fixed-mounting tachometer with NSN 6680-011147653, as part of a sources-sought notice under solicitation SPE4A626RXA78. This announcement is purely informational and does not constitute a solicitation, request for proposal, or commitment to award a contract; no funds are available for response preparation, and submissions are entirely voluntary. Respondents are asked to provide details on any manufacturers able to produce the item, including their location by city and state or country, and available points of contact, all to be submitted to Francis Rettzo at FRANCIS.RETTZO@DLA.MIL or by phone at 804-629-1389. There are currently no approved sources listed for this item, and the opportunity is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside classification with NAICS code 334519. The response deadline is June 30, 2026, at 7:00 PM Eastern Time, and the office overseeing this notice is located in Richmond, Virginia.

POSTED

DEADLINE

155mm Linear Variable Displacement Transducers EquipmentThe contract involves the development and delivery of specialized equipment for 155mm artillery calibration and sensor deployment, specifically the Calibration Guide Tube Assembly and the Self-Propelled Sensor Delivery Unit. The Calibration Guide Tube Assembly must enable calibration ring removal while remaining mounted to the cannon muzzle, ensuring precise in-situ calibration of 155mm M284 and M776 gun tubes without disassembly. It must also be designed to support the crawler, LBIS, and LVDT sensors while maintaining full access to the cannon bore and muzzle area. The Self-Propelled Sensor Delivery Unit must be capable of pushing or pulling 120mm sensors a minimum of 35 feet axially within the gun tube and must interface seamlessly with existing YPG-owned LBIS, LVDT, and VBIS sensors. It requires a muzzle adapter compatible with 155mm gun tubes and a flexible cable protected by a non-scratch cover to prevent damage to the barrel interior. Data acquisition must span the full bore length up to the muzzle with linear resolution of at least 0.010 inches and uni-directional position repeatability of 0.040 inches or better. This equipment is sought under Solicitation Number W911S226U3368, issued by the Department of Defense through the U.S. Army Fort Drum office in New York, with performance expected to occur in Arizona. The solicitation is a Total Small Business Set-Aside under NAICS code 334519, indicating it is exclusively available to small businesses. The response deadline is July 2, 2026, with the requirement posted on June 25, 2026. Primary point of contact for inquiries is David Le, reachable via phone or email provided. The equipment is critical for maintaining accuracy and readiness of 155mm artillery systems and must meet stringent performance and compatibility standards to ensure operational effectiveness across existing sensor infrastructure.

POSTED

DEADLINE

105-120mm Video Bore Inspection System EquipmentThe contract is for the procurement of a 105-120mm Video Bore Inspection System Equipment comprising a portable dual-channel data acquisition base unit and a self-propelled sensor delivery unit. The base unit features a ruggedized Intel Core i7-1260P processor, 16GB DDR4 RAM, 512GB NVMe SSD storage, and a sunlight-readable 13.3-inch Full HD display, all housed in a compact 380x200x300mm enclosure weighing 12.4 kg. It operates on 110/240 VAC power and is MIL-STD-810H and MIL-STD-461G certified, with an operating temperature range of -29°C to 63°C, IP66 certification, and compliance with ASTM D4169 DC 13 Assurance Level II for drop and vibration resistance. The system includes a detachable controller, LaserViewer Inspection Module, wireless mouse, shipping case, and full documentation suite with US-style AC power components. The self-propelled sensor delivery unit is designed to maneuver 105mm and 120mm LBIS sensors axially over a minimum distance of 8 meters within gun tubes, ensuring full bore inspection up to the muzzle. It includes a muzzle adapter compatible with both caliber sizes, a flexible non-scratch cable, and integrates seamlessly with existing YPG-owned laser sensors. The system achieves a linear resolution of 0.010 inch or better and targets a uni-directional position repeatability of 0.040 inch or better. All equipment is intended for use in demanding military environments and must operate reliably under non-condensing humidity up to 95%. The solicitation number is W911S226U3370, issued by the U.S. Army’s Office at Fort Drum, with a response deadline of July 1, 2026, and the primary point of contact is David Le at david.v.le.civ@army.mil.

W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

The contract entails the supply of pressure gauges identified by part number 4A52-00-097 or technically equivalent alternatives that come with full certification. The contracting party is the Department of National Defence, Government of Canada, with the performance locations specified in British Columbia and Nova Scotia. This subcontract, classified under NAICS code 334519, requires suppliers to provide products meeting stringent technical specifications to ensure compatibility and reliability. Issued on May 11, 2026, the contract invitation allows responses up to May 29, 2026. While the solicitation number and specific office contact details are not provided, the procurement is clearly aimed at securing pressure gauges either OEM or certified equivalent versions to fulfill government operational needs. The procurement process is accessible via the Canada Buys portal, highlighting an opportunity for qualified vendors to participate in supplying critical instrumentation for national defense purposes.

General Info

Supply of certified pressure gauges for Canadian Defence in BC and Nova Scotia, bids due May 29, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

334519 - Other Measuring and Controlling Device Manufacturing View NAICS

Place of Performance

Canada, British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 11

subcontract

Response DeadlineMay 29

Deadline has passed

Submission Closed

05/29/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply pressure gauges matching part number 4A52-00-097 or provide technically equivalent alternatives with full certification.