Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Raw Aluminum Alloy Material

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of certified aluminum alloy raw material with full traceability from source to delivery, including comprehensive mill test reports to verify composition, mechanical properties, and processing history. All materials must meet stringent defense industry specifications and comply with applicable environmental regulations to ensure suitability for critical aerospace and defense applications. The material is destined for performance at Tinker Air Force Base, with delivery and compliance deadlines strictly enforced. Submission responses are due by July 27, 2026, and the contract is structured as a subcontract under the NAICS code 331313, indicating classification within the aluminum rolling, drawing, and extruding industry. The ordering activity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with no set-aside provisions applied. The procurement is managed through the DIBBS platform, and bidders must ensure adherence to all technical, documentation, and logistical requirements outlined in the solicitation to qualify for award.

General Info

Supply certified aluminum alloy with full traceability for aerospace defense use at Tinker Air Force Base by July 27, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

331313 - Alumina Refining and Primary Aluminum ProductionView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of certified aluminum alloy raw material with full traceability, mill test reports, and compliance with defense and environmental standards.

Similar Contracts

Same NAICS industry code

MASSAGER, MUSCLEThe contract is for a hand-held muscle massager featuring a foam-covered, ergonomically designed body with non-slip grips, suitable for targeted relief on the neck, arms, shoulders, upper and lower back, hips, glutes, quads, hamstrings, IT bands, calves, shins, and feet. The foam is closed-cell, non-porous, and free of rubber or latex, ensuring durability and ease of cleaning with antibacterial gel or spray. The unit measures 18 inches overall with a 10-inch roller length and is portable for convenient use. It is supplied as a single unit under the NSN 6530-01-600-2392, with a required delivery within 20 days of award. Technical and quality requirements are governed by the DLA Master List, and packaging must comply with DLA standards. The government mandates removal of its identification from non-accepted supplies, and bidders must clearly state the source and part number being offered. The solicitation number is SPE2DH-26-T-5334, issued on July 20, 2026, with responses due by July 27, 2026, under a federal procurement managed by the Department of Defense through the Medical Supply Chain FSH office, with performance located at Fort Bliss, Texas. Primary point of contact is Tina Vu, reachable via email and phone provided.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 18 hours ago

DEADLINE

FOAM ROLLER, PHYSICAL TThe contract is for the procurement of two foam rollers designed for physical therapy, specifically a firm blue round foam roller measuring 6 inches by 12 inches, identified by the NSN 6530-01-600-8194. Each unit must be individually packaged in a sealed commercial container that protects against damage or breakage and then packed in suitable commercial shipping containers to ensure safe and cost-effective delivery to Fort Bragg, North Carolina, with a delivery deadline of 20 days after award. All packaging and labeling must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and suppliers must reference this standard for proper identification and marking. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the time of solicitation or award. The contract also includes provisions for the removal of government identification from non-accepted supplies and may involve covered defense information. Bidders are required to specify the manufacturer, part number, and source of the foam rollers being offered, and all submissions must be received by the response deadline of July 27, 2026. The procurement is managed by the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 18 hours ago

DEADLINE

FOAM ROLLER, PHYSICAL T

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 18 hours ago

DEADLINE

Niobium Material Supply

Fermilab - DOE Contractor

POSTED

about 23 hours ago

DEADLINE

LAMP HOLDER ASSEMBLThe contract is for the procurement of a single lamp holder assembly identified by NSN 6530-01-566-6739, intended for use on Federal Medical surgical ceiling lights. The item must comply with stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951 and MIL-STD-129. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the product, except for functional uses in batteries, fluorescent lamps, required instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and equipped with a secondary containment barrier as per NAVSEA 5100-003D. Packaging must adhere to commercial standards and the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, with all units sealed in suitable containers to prevent damage and shipped in commercial exterior containers using the lowest-cost carrier to the specified delivery point. The item is not regulated by the FDA. Delivery is required within 20 days FOB destination with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. Shipping must avoid parcel post and use the fastest traceable means, with parcel post address and freight shipping details provided for USS ESSEX LHD 2. All packaging and labeling must conform to DLA Packaging Requirements and palletization standards. The solicitation number is SPE2DH-26-T-5292, with a response deadline of July 27, 2026, and an original required delivery date of July 21, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Raw Materials & Components SupplyThe contract involves the supply of aerospace-grade aluminum, advanced composites, and AI-enabled components specifically for the fabrication of structural panels, with all materials required to meet stringent defense standards. Full compliance with the Defense Federal Acquisition Regulation Supplement is mandatory, ensuring that sourcing, manufacturing, and delivery adhere to U.S. national security requirements. Comprehensive traceability systems must be implemented from raw material origin through final assembly to guarantee authenticity and prevent the introduction of counterfeit or non-compliant parts. The procurement is structured as a subcontract under the Department of Defense’s Defense Logistics Agency, classified under NAICS code 331313 for aluminum rolling, drawing, and extruding. Performance is expected to support critical defense applications, with no specific geographic restriction listed for place of performance. The contract was posted on July 17, 2026, and is accessible via the DIBBS portal under award number SPE4A726P3877. All supplied materials must align with the technical and regulatory rigor expected in defense aerospace systems, emphasizing quality assurance, supply chain integrity, and domestic sourcing where applicable.

Defense Logistics Agency

POSTED

DEADLINE

HYGIENE KIT, HOSPITAL PThe contract is for a hospital patient hygiene kit containing thirty units, each comprising a hair brush, comb, soap, a 6x10 inch ziplock bag, a razor, a toothbrush, toothpaste, a clear vinyl pouch, a 4x4 inch box label, and five packets of 0.25 ounce shaving cream. The unit of issue is a package of thirty items, with one package ordered under NSN 6530-01-618-9373 and purchase request 7017513490. All items must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA specifications, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and bidders must provide the source and part number for each item supplied. Delivery is required within five days of award, and the solicitation, issued under SPE2DH-26-T-5258, closes on July 23, 2026. The procurement is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Bronze Strainer Manufacturing and SupplyThe contract calls for the manufacture and supply of precision bronze strainers specifically designed for use in medical sterilization equipment, requiring strict adherence to technical specifications that ensure performance under rigorous clinical conditions. All products must be produced using domestically sourced materials and components to meet federal sourcing requirements, and must be packaged according to military packaging standards to guarantee integrity during transport and storage in austere environments. The work is classified as a subcontract under NAICS code 331313, indicating it falls within the copper foundry industry, and performance is expected to occur at a military postal address designated as FPO with zip code 96678. The solicitation was posted on July 15, 2026, with a response deadline of July 22, 2026, and is being managed by the Department of Defense’s Medical Supply Chain FSH office, reflecting its critical role in supporting military medical operations.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

VALVE, BALL ANLRThe contract specifies the procurement of a ball valve designated as VALVE, BALL ANLR with NSN 6530-01-546-3565 and part number 700321 REV J, requiring one unit for delivery within 20 days to a FPO military address. The item is classified as a medical device regulated by the FDA under Regulation 880.6880, Class II, requiring compliance with 510(k) premarket notification, registration, labeling, and good manufacturing practices. All packaging and marking must adhere to the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed packaging guidelines require each unit to be sealed in a protective container and shipped in commercial exterior containers suitable for safe transport at the lowest freight rate. The valve is subject to strict prohibitions against intentional use of mercury or mercury compounds except in approved applications like batteries or sensors, with additional containment requirements for portable devices. The vendor must ensure compliance with DLA packaging and labeling standards and use only authorized unit of issue codes. The delivery is FOB destination with zero variance allowed, inspection and acceptance occur upon arrival, and shipping must bypass parcel post in favor of traceable methods. The contract references technical and quality requirements from the DLA Master List, and the supplier must comply with all applicable defense logistics regulations including radiation-controlled environments and defense information handling. The point of contact for inquiries is Tina Vu of the Department of Defense, and the solicitation response deadline is July 22, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

STRAINER, BRONZThe contract is for the procurement of one unit of a brass strainer, NSN 6530-01-546-3556, intended for use with a general purpose sterilizer within the U.S. Department of Defense’s Medical Supply Chain FSH. The solicitation, identified as SPE2DH-26-T-5209, was issued on July 15, 2026, with responses due by July 22, 2026, and requires delivery by July 17, 2026, within a 20-day ADO window. The item must be shipped FOB destination to USS ARLINGTON LPD 24, FPO, ZIP 96678, using the fastest traceable means without parcel post. Packaging must comply with commercial standards and be secure in a sealed unit container to prevent damage, with exterior shipping containers suitable for safe, low-cost carriage to the delivery point. All labeling and marking must adhere to Medical Marking Standard No. 1, replacing MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement (RP001). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers, and supersede ASTM D3951 where applicable. The item is subject to the Buy American Act and Berry Amendment, with a reduced threshold of $150,000, requiring full disclosure of non-domestic materials. The contractor must comply with cybersecurity mandates including NIST SP 800-171 DoD Assessment Requirements and safeguarding of covered defense information, in addition to FAR and DFARS clauses covering trafficking in persons, equal opportunity, electronic submission of payments via WAWF, and prohibited materials such as hexavalent chromium. Payment and receiving reports must be submitted electronically through WAWF under DFARS Appendix F requirements, and the contractor must maintain active SAM registration with updated socioeconomic and small business status representations. This solicitation is not a small business set-aside, and award will be based on compliance with all technical, packaging, regulatory, and cybersecurity conditions.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

HYGIENE KIT, PATIENTThe HYGIENE KIT, PATIENT is a medical supply item with NSN 6530-01-621-4282, procured in quantities of 10 boxes, each containing 12 units, for delivery within five days to San Antonio, Texas, under contract SPE2DH-26-T-5236. Each unit must be sealed in a protective container to prevent damage and shipped in commercial exterior packaging that ensures safe, cost-effective delivery via common carrier, with compliance to Medical Marking Standard No. 1, which replaces MIL-STD-129. All items must be properly marked per MMS NO. 1 guidelines, and technical and quality requirements referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA requirements, and government identification must be removed from non-accepted supplies. The procurement is governed by federal standards under NAICS code 331313, with the offering deadline set for July 22, 2026, and the primary point of contact is Tina Vu at DLA Troop Support.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

COVER, HEAT TREATMENT PThe item is a heat treatment pad cover, specifically designed for cervical use, measuring 24 inches in length and 6.6 inches in width, made of washable terry cloth material. It is intended for use with heat treatment pads and is to be supplied as individual units, with a quantity of two required. The product is identified by the NSN 6530-01-600-2674 and must comply with the DLA Packaging Requirements for Procurement, incorporating all referenced technical and quality standards listed in the DLA Master List of Technical and Quality Requirements. Bidders are required to specify the source and part number being offered. Delivery is due within 20 days after award, and the procurement is under solicitation SPE2DH-26-T-5225, issued by the Department of Defense’s Medical Supply Chain FSH. The solicitation was posted on July 15, 2026, with responses due by July 22, 2026, and performance will take place at Fort Bliss, Texas, 79918-0000. The primary point of contact for inquiries is Tina Vu, reachable via email and phone.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Quality Assurance and Testing ServicesThe contract requires independent quality sampling and inspection of bushings in accordance with MIL-STD-1916 or ASQ H1331 standards, including the application of AQL classification and comprehensive traceability reporting. Work must be performed at Fort Irwin, California, with zip code 92310-9986, and is classified as a subcontract under NAICS code 541330. The offering organization is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and the solicitation is open for response until July 28, 2026, with a posted date of July 20, 2026. All inspections and documentation must meet strict military and industry-defined quality protocols to ensure product conformity and full traceability throughout the process.

Engineering Services

POSTED

about 18 hours ago

DEADLINE

Packaging, Marking, and Logistics for Defense ShipmentThis contract requires the provision of military-compliant packaging, labeling, and barcoding for bushings destined for Fort Irwin, California, in strict adherence to DLA and MIL-STD specifications. All shipments must meet Department of Defense standards for documentation, marking, and logistics to ensure seamless receipt and inventory control at the installation. The work is classified as a subcontract under NAICS code 493190, and performance is exclusively tied to the specified delivery location with zip code 92310-9986. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Participation is subject to full compliance with military logistics protocols, and all deliverables must be traceable and certified to meet federal defense shipment requirements.

Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

Manufacture and Supply of Tapered BushingsThe contract requires the manufacture, testing, packaging, and delivery of tapered bushings identified by NSN 5365012441608, adhering strictly to specifications set by the Defense Logistics Agency, MIL-STD standards, and federal hazardous materials regulations. All work must be completed in compliance with quality and safety benchmarks to ensure suitability for military use. The item is to be delivered to Fort Irwin, California, with a postal code of 92310-9986, and the performance location is fixed at this site. The solicitation is issued as a subcontract under NAICS code 332998, indicating it pertains to other fabricated metal product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The opportunity was posted on July 20, 2026, with a firm response deadline of July 28, 2026. Interested parties must submit proposals through the DIBBS platform using the reference number SPE4A726T582N, and all deliverables must meet required federal compliance and logistics protocols prior to acceptance and payment.

Enameled Iron and Metal Sanitary Ware Manufacturing

POSTED

about 18 hours ago

DEADLINE

Spill Containment Unit Supply and PackagingThe contract requires the supply, packaging, and delivery of six spill containment units that must meet stringent military packaging and labeling standards, ensuring full compliance with defense logistics requirements. These units are intended for use in environments where hazardous material containment is critical, and strict adherence to federal specifications is mandatory to guarantee operational readiness and safety. The procurement is structured as a subcontract under the North American Industry Classification System code 339920, which pertains to other miscellaneous manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 20, 2026, with a firm response deadline of July 28, 2026, leaving a narrow window for qualified suppliers to submit proposals. While the specific place of performance and point of contact details are not provided, the contract is being processed through the DLA’s DIBBS system, indicating a formal defense supply chain process. Packaging and labeling must follow Department of Defense guidelines to facilitate seamless integration into military logistics, inventory management, and field deployment procedures. Suppliers must demonstrate capability in producing units that withstand military transport and storage conditions while fully meeting all safety and regulatory compliance benchmarks.

Sporting and Athletic Goods Manufacturing

POSTED

about 18 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract seeks qualified small businesses to provide quality assurance and inspection services for aerospace components using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 standards. All work must be performed at the specified place of performance in Jacksonville, Florida, with a focus on ensuring compliance with rigorous aerospace quality requirements through statistically valid, non-traditional sampling methods that eliminate batch sampling in favor of 100% confidence in product integrity. This is a subcontract opportunity classified under NAICS code 541330 and set aside exclusively for total small businesses as defined by the SBA under FAR 19.5, ensuring eligibility is restricted to businesses meeting the small business size standards for this category. The solicitation was posted on July 20, 2026, with a response deadline of July 28, 2026, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The contract does not specify a solicitation number but is accessible via the DIBBS platform using the provided UI link. Performance expectations require full adherence to military and industry inspection standards without reliance on conventional sampling techniques, emphasizing defect prevention and real-time quality control processes. Contractors must demonstrate proven experience with zero-based sampling systems in aerospace environments and the capability to operate within the stringent compliance framework of DoD supply chain requirements.

Engineering Services

POSTED

about 18 hours ago

DEADLINE

Defense Logistics Packaging and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services in full alignment with MIL-STD-129, ASTM D3951, and specific Defense Logistics Agency requirements. All work must adhere to stringent federal standards for the secure, durable, and properly marked handling of defense-related materiel, ensuring compatibility with military logistics and supply chain operations. Services must be performed at the designated place of performance in Jacksonville, Florida, with all deliverables meeting exacting technical and regulatory specifications to support the Department of Defense's distribution and storage protocols. This is a total small business set-aside subcontract under NAICS code 493190, exclusively available to small businesses certified by the Small Business Administration. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, and is managed by the ASC Supplier Oper AE and AF Division. Contractors must demonstrate proven capability in military packaging systems and be prepared to comply with all DLA-specific directives, including labeling formats, preservation methods, and documentation requirements. The contract is awarded through the DIBBS platform, with no specified point of contact listed, requiring interested parties to review the full solicitation via the provided link for additional operational and compliance details.

Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Handling and Labeling ComplianceThe contract titled Hazardous Materials Handling and Labeling Compliance requires strict adherence to OSHA and DLA standards for the proper labeling, documentation, and handling of hazardous materials to ensure full regulatory compliance during shipment and operational use. This subcontract is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision, with the NAICS code 541690 indicating it falls under Other Scientific and Technical Consulting Services. The work must be performed at the specified place of performance in Jacksonville, Florida, with a zip code of 32212-0103, and all activities must meet the stringent safety and compliance protocols mandated by federal agencies. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, with the contracting officer being part of the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. All contractors must demonstrate proven capability in hazardous materials management and complete documentation processes to fulfill contractual obligations under this requirement.

Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

Precision Machined Components SupplyThe contract is for the supply of precision machined components intended for use in aerospace or defense systems, requiring adherence to military inspection and packaging standards to ensure reliability and compliance in critical applications. It is structured as a subcontract, with a Total Small Business Set-Aside designation under the SBA, limiting eligibility to qualified small businesses as defined by FAR 19.5, and is classified under NAICS code 332721 for machine shops. The solicitation was posted on July 20, 2026, with a firm response deadline of July 28, 2026, and performance is to occur at a designated location in Jacksonville, Florida, with a ZIP code of 32212-0103. The contracting activity is administered by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, though specific point of contact details and full office address information are not provided in the data. All bids must meet the technical and regulatory requirements for military-grade components and packaging, and interested parties are directed to the DIBBS portal for full solicitation details.

Precision Turned Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Aerospace Door and Fairing Assembly ManufacturingThe contract involves the manufacture and delivery of an aerospace door and fairing assembly designated as part number 70215-42410-056, requiring full compliance with military specifications and DLA packaging standards to ensure operational readiness and logistical compatibility. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the SBA and aligned with NAICS code 336413, which pertains to aircraft and spacecraft manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, and performance is to be carried out at a location in Jacksonville, Florida, with a zip code of 32212-0103. The contracting office operates under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, and the procurement channel is accessible via the DIBBS platform for registered participants.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Radioactive Materials Identification & LabelingThe contract requires the identification and proper labeling of items containing radioactive materials that exceed established regulatory thresholds, in full compliance with MIL-STD-129 and the specific requirements outlined in clause 52.223-7. This subcontract is issued under the NAICS code 541380 and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with performance expected at the location in Anniston, Alabama, 36201-4199. All responding parties must ensure accurate detection, classification, and marking of radioactive content according to military and federal standards, with responses due by July 28, 2026. The task demands technical precision and adherence to regulatory frameworks governing the handling and labeling of hazardous materials in defense supply chains.

Testing Laboratories and Services

POSTED

about 18 hours ago

DEADLINE

Cybersecurity & CUI Safeguarding SupportThe contract requires implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information stored, processed, or transmitted on contractor systems. This includes full adherence to DFARS 252.204-7012 and associated clauses governing the safeguarding of controlled unclassified information, ensuring all technical, administrative, and physical safeguards are properly applied and documented. The contractor must also establish and maintain a robust cyber incident reporting capability to detect, respond to, and report any security breaches or anomalies involving covered defense information in accordance with federal requirements. All work must be performed at the designated place of performance in Anniston, Alabama, with compliance expected throughout the contract lifecycle. The solicitation is classified as a subcontract under NAICS code 541512, indicating the nature of the services provided relates to computer systems design and related services. The response deadline is July 28, 2026, and the offering is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The contractor is responsible for aligning all cybersecurity practices with current federal standards, maintaining audit-ready documentation, and ensuring continuous compliance with all applicable defense information protection mandates.

Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract seeks specialized hazard communication services focused on ensuring full compliance with OSHA 29 CFR 1910.1200 and DFARS 252.223-7001, covering the development of safety data sheets, accurate labeling of hazardous materials, and ongoing adherence to federal chemical safety regulations. The work requires expert knowledge in chemical classification, regulatory documentation, and proper dissemination of hazard information to meet both industrial safety standards and defense contract requirements. This subcontract is issued under NAICS code 541690 and is performance-based with the place of performance located in Anniston, Alabama, with a zip code of 36201-4199. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026. The contracting entity operates under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, and the contract will support defense supply chain integrity through precise, compliant hazard communication practices.

Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE