Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Raw High-Performance Textile Materials

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of bulk nylon or polyester webbing material that must meet military specification standards for use in the fabrication of aircraft arresting assemblies. This raw textile material is critical for defense applications where durability, high tensile strength, and compliance with rigorous military performance criteria are non-negotiable. The material must be delivered in sufficient quantities to support ongoing production needs and must adhere strictly to established technical requirements for use in safety-critical aircraft systems. Issued under the Defense Logistics Agency and classified under NAICS code 313210 for textile mill products, this subcontract is part of the Department of Defense’s broader supply chain for aviation safety equipment. The contract was posted in August 2026 and is linked to a specific delivery order under contract SPE7MX26D0026 with delivery order SPE7M126F4797. There is no set-aside designation or geographic restriction specified, indicating the opportunity is open to qualified suppliers nationwide. Performance is expected to support nationwide defense operations, with no specific place of performance listed, suggesting delivery to multiple military or contractor sites as required.

General Info

Supply of military-spec nylon or polyester webbing for aircraft arresting systems under DLA contract SPE7MX26D0026.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

313210 - Broadwoven Fabric Mills

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M126F4797.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WEBBING ASSEMBLY, BARRIER AIRCRAFT ARREST

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 4

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of bulk MIL-SPEC compliant nylon or polyester webbing material for fabrication of aircraft arresting assemblies.

Similar Contracts

Same NAICS industry code

Military-Grade Webbing Material SupplyThis subcontract involves the supply of high-tenacity raw textile webbing material to prime contractors supporting the DLA Weapons Support Strategic Acquisition Program Directorate. The materials must strictly adhere to the specifications of NSN 5340-01-609-8284 and be delivered in raw webbing material rolls. To ensure quality and compliance, the provider is required to submit material test reports and certificates of analysis with the deliveries. A critical requirement of this contract is strict adherence to the Berry Amendment and the Buy American Act, mandating that all supplied materials be of domestic origin. The opportunity is categorized under NAICS code 313210 and is managed by the Department of Defense. Interested parties must respond by November 12, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 24 hours ago

DEADLINE

Heavy-Duty Vehicle Upholstery Material SupplyThis subcontract for Heavy-Duty Vehicle Upholstery Material Supply involves the procurement of raw textile fabrics, threads, and fasteners to support prime contractors fulfilling DLA supply contracts. The materials must be military-grade, durable, and weather-resistant or flame-retardant, specifically adhering to Oshkosh Defense LLC part number 5SK66 specifications. To ensure quality and regulatory adherence, the provider must supply Certificates of Conformance for critical application standards and maintain strict compliance with the Buy American Act. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines, the contract falls under NAICS code 313210. Performance for the delivery of raw textile rolls, thread, and hardware is centered in Texarkana, Texas. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 24 hours ago

DEADLINE

Supply of Nonwoven Cotton and Perforated Plastic FilmThis subcontract involves the manufacture and supply of white nonwoven cotton fabric and perforated plastic film used for medical-grade nonadherent coverings. Supporting prime contractors on DLA Troop Support Medical Supply Chain projects for the Department of Defense, the provider must ensure all materials adhere to strict medical sterility and biocompatibility standards. Deliverables consist of bulk rolls or sheets of the specified materials. The contract requires strict compliance with the Buy American Act and the Berry Amendment. Performance is associated with NAICS code 313210 and is designated for the Medical Supply Chain MD Surg FSF. The response deadline for this opportunity is November 2, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 24 hours ago

DEADLINE

21C31-268293 RFSO Denim fabric

Solicitation # WS5935204941

The Government of Canada, through the Department of Public Works and Government Services, is seeking offers to establish a National Individual Standing Offer for CORCAN – Correctional Service Canada. The contract involves the supply of 100% cotton bleach-safe denim fabric, with an estimated annual requirement of 50,000 meters. All materials are to be delivered to various locations within the province of Quebec. This solicitation is restricted to Canadian suppliers and those from Applicable Trading Partners. The initial term of the Standing Offer is for one year, with the possibility of two subsequent one-year extensions. Interested parties must submit their responses by November 30, 2026.

Department of Public Works and Government Services

POSTED

DEADLINE

in about 1 month

Supply of Heaving Line (NSN 2020014490339)This subcontract involves the supply of 124 units of 100-foot heaving line to support prime contractors for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The provided materials must strictly adhere to NSN 2020014490339 specifications. Additionally, the contractor is responsible for ensuring all items are marked according to MIL-STD-129 and palletized in compliance with RP001 DLA Packaging Requirements. The final deliverables must be packaged, marked, and delivered to the designated DLA location in New Cumberland, Pennsylvania. This procurement falls under NAICS code 313210, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

High-Tensile Medical Strap SupplyThe High-Tensile Medical Strap Supply subcontract, issued by the Department of Defense under the Medical Supply Chain MD Surg FSF, involves the production of reinforced webbing and strapping for prime contractors fulfilling DLA supply contracts. The scope of work requires the use of industrial weaving looms to create high-tensile strength straps from medical-grade nylon or polyester, ensuring the materials are durable and resistant to degradation in field environments. A critical requirement of the contract is the provision of material strength certifications to guarantee the straps do not fail during blood flow occlusion. The deliverables include high-tensile webbing provided in either cut or rolled formats. Performance for this contract is centered in Indianapolis, with the project falling under NAICS code 313210. The solicitation was posted on October 25, 2026, with a response deadline of November 2, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Multifunctional Fabric ConstructionThis subcontract opportunity with the Department of Defense, managed by W6QK Acc-Apg Natick, involves the weaving, knitting, or construction of technical fabrics for soldier protection projects. The selected provider will produce fabrics designed for cold, temperate, and hot environments, ensuring all materials meet ASTM D5034, D1424, and D3786 standards. Strict adherence to the Berry Amendment and PFAS-free certification is required for all deliverables. Deliverables consist of either full-width fabric measuring at least five continuous linear yards or a minimum of five 24 by 36 inch swatches. The project falls under NAICS code 313210 and will be performed in Natick, Massachusetts. Interested parties must submit their responses by the deadline of December 23, 2026.

W6QK Acc-Apg Natick

POSTED

DEADLINE

in about 2 months

RFI - Novel or Multifunctional Fibers, Yarns, Coatings/Finishes and Fabrics for Soldier Protection and Comfort (MFFYF)

Solicitation # RFINovelOrMultifunctionalFibersYarnsCoatings-FinishesandFabricsForSoldierProtectionAndComfort(MFFYF)

The US Army DEVCOM Soldier Center, in coordination with the Product Manager for Soldier Clothing and Individual Equipment, has issued this Sources Sought Announcement to identify potential sources of multifunctional fibers, yarns, fabrics, coatings, or finishes. The primary objective is to enhance the environmental protection of dismounted Warfighters by identifying materials that provide at least two functionalities, such as moisture management, thermal protection, repellency, vector protection, and flame resistance. The government is seeking both near-term solutions with a Technology Readiness Level (TRL) of 5 to 7+ for rapid integration into active Programs of Record, and far-term next-generation concepts with a TRL of 2 to 4 to inform future technology investments. All submissions must be completely PFAS-free and avoid cyclic siloxanes, silicones, and heavy metal catalysts. Respondents must provide detailed business information, including CAGE and NAICS codes, and verify compliance with the Berry Amendment. Technical submissions require comprehensive data, including GHS-compliant Safety Data Sheets and verifiable test reports adhering to standards such as ASTM D5034 for tensile strength and AATCC TM22 for water repellency. Physical samples, including specific yardage for fabrics or minimum meterage for yarns, must be submitted for destructive laboratory testing. Electronic responses, including white papers and the completed Appendix A template, are due by December 23, 2026, with physical samples to follow within six weeks. This announcement is for information gathering and planning purposes only and does not constitute a formal solicitation or a commitment to award a contract.

W6QK Acc-Apg Natick

POSTED

DEADLINE

in about 2 months

Medical Grade Textile SupplierThis subcontract opportunity is for a medical grade textile supplier to provide black bandage material to prime contractors supporting Department of Defense medical supply contracts. The scope of work involves the weaving or knitting of medical-grade black textile or gauze, which must be cut into specific dimensions of 4 inches wide by 3 yards in length. Deliverables may be provided as rolls or pre-cut lengths, and all production must strictly adhere to Berry Amendment compliance for textiles. Managed by the Medical Supply Chain MD Surg FSF, the performance of this contract will take place at Fort Campbell. Interested parties should note the short response window, with the solicitation posted on October 22, 2026, and a response deadline of October 28, 2026. The requirement falls under NAICS code 313210.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Aviation-Grade Webbing and HardwareThis subcontract involves the supply of high-strength, flame-resistant aviation-grade nylon and polyester webbing along with corrosion-resistant hardware for prime contractors supporting Defense Logistics Agency aviation life support contracts. The materials must be compatible with Interspiro P/N 460-190-457 and include all necessary material certifications and Certificates of Conformance to ensure strict adherence to Berry Amendment compliance. Managed under NAICS code 313210, the contract focuses on the delivery of raw materials and hardware components with performance taking place in San Diego, California. The solicitation was posted on October 22, 2026, with a response deadline set for November 2, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Military-Grade Textile Material SupplyThis subcontract for Military-Grade Textile Material Supply supports prime contractors on DLA Troop Support C and T Supply Chain projects under the Department of Defense. The scope of work involves the provision of bulk rolls of polyester serge fabric in color shade 65018 and spools of synthetic metallic silver yarn. To ensure strict adherence to military technical specifications, the supplier is required to provide all necessary material certifications and technical data sheets. The contract falls under NAICS code 313210 and was posted on October 22, 2026, with a response deadline of October 29, 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

TT-C-490 Compliant Material SupplyThis subcontract involves the supply of raw webbing and hardware to prime contractors supporting the DLA Weapons Support Land Supply Chain. The provider is responsible for sourcing materials that strictly adhere to the physical and chemical properties outlined in specification TT-C-490. A critical requirement of the contract is the provision of Mill Test Reports to certify that all materials comply with Berry Amendment domestic origin regulations. The scope of work focuses on the delivery of certified raw materials accompanied by the necessary origin documentation to ensure full regulatory compliance.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Cafeteria & Food Truck Services - DLA Susquehanna

Solicitation # NAFUA1-26-R-0005

The Defense Logistics Agency NAF Contracting Office, acting for the Susquehanna Post Restaurant Fund, is soliciting proposals under RFP NAFUA1-26-R-0005 for a single concessionaire to provide full-scope cafeteria, catering, and optional food truck services at the Defense Distribution Center Susquehanna in New Cumberland, Pennsylvania. This revenue-generating agreement requires the contractor to operate Darrs Cafe in Building 430 and the Inflight Cafe in Building 2001, supporting approximately 4,500 personnel. The contract structure includes a two-year base period starting December 1, 2026, with four subsequent two-year option periods for a total potential duration of ten years. Notably, the government will not pay for these services; instead, the concessionaire pays the government a monthly fee based on the higher of a Minimum Monthly Guarantee or a gross sales commission percentage. Operational requirements include providing breakfast and lunch, managing 24/7 automated kiosks, and adhering to strict health and safety standards, including ServSafe certification for supervisors and compliance with the Food Allergen Labeling and Consumer Protection Act. All food must originate from sanitarily approved sources and meet specific packaging and labeling criteria. Award decisions will be based on a composite score consisting of a technical evaluation (60 percent), focusing on the operating plan and past performance, and a financial fee proposal (40 percent). Proposals must be submitted electronically or in hard copy to Contracting Officer Michael Thompson by October 30, 2026, at 4:00 PM EDT.

POSTED

about 5 hours ago

DEADLINE

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 24 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 24 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690016685478)This subcontract involves the manufacture or procurement of three identification markers under NSN 7690016685478 for prime contractors supporting Defense Logistics Agency supply contracts for the USS GABRIELLE GIFFORDS (LCS 10). The selected provider must ensure all units are marked according to MIL-STD-129 with Special Marking Code 32 and packaged in compliance with MIL-STD-2073-1E. The contract falls under NAICS code 339999 and requires strict adherence to DFARS 252.204-7012 regarding the safeguarding of covered defense information. Performance will take place in FPO 96671, with the final deliverable being three properly marked and packaged identification markers.

All Other Miscellaneous Manufacturing

POSTED

about 24 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 24 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 24 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 24 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 24 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 24 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 24 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Textile Webbing Manufacturing and Supply

C AND T SUPPLY CHAIN

POSTED

CLOSED

WEBBING, TEXTILE

Solicitation # SPE1C1-26-T-1581

C AND T SUPPLY CHAIN

POSTED

CLOSED

Supply of Lint-Free Cotton Wiping Cloths (20"x20")

DLA Maritime - Pearl Harbor

POSTED

CLOSED

Manufacture and Supply of Square Mesh Safety Nets

DLA Maritime - Portsmouth

POSTED

CLOSED

SQUARE MESH SAFETY NET

Solicitation # SPMYM326Q8033

DLA Maritime - Portsmouth

POSTED

CLOSED

Supply of Black Coated Cloth (Type II, Class 2)

C AND T SUPPLY CHAIN

POSTED

CLOSED

Manufacture of Disposable Aluminum-Coated Plastic Bed Sheets

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

CLOSED

Solicitation # SPE1C1-26-Q-0396

C AND T SUPPLY CHAIN

POSTED

CLOSED

Solicitation # SPE2DS-26-T-305A

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

CLOSED

Supplier of High-Strength Nylon/Polyester Yarn (Raw Material)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Medical Component Supply – Underpads

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

CLOSED

Solicitation # SPEFA5-26-Q-0055

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS