Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Seal Replacement Parts Kit

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the procurement and delivery of one unit of a Parts Kit, Seal Replacement, identified by NSN 5330015124287 and part number RE516512, to Jacksonville, Florida, with a mandatory delivery deadline of August 14, 2026. This order is DPAS-rated, indicating its high priority within the Department of Defense supply chain, and is issued as a subcontract under the NAICS code 423840 for wholesale trade of industrial supplies. The contracting entity is the Defense Logistics Agency, an arm of the Department of Defense, and the fulfillment is governed by the priority rating system to ensure timely acquisition for critical defense needs. Delivery must be completed without delay to meet operational requirements, and the order is tracked under contract number SPE7LX22D0068 with delivery reference SPE7L126FACF8.

General Info

Procure and deliver one seal replacement kit to Jacksonville, Florida by August 14, 2026, DPAS-rated, under DLA contract SPE7LX22D0068.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

423840 - Industrial Supplies Merchant WholesalersView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of one unit of a 'PARTS KIT, SEAL REPL' (NSN: 5330015124287, P/N RE516512) to Jacksonville, FL by August 14, 2026, under a DPAS-rated order.

Similar Contracts

Same NAICS industry code

CP-0380/25. Supply of Pneumatic Sewer Plugs and Poly-Lift Line.

Solicitation # GOJEP-7147324

National Water Commission

POSTED

DEADLINE

Flashlight Procurement and DeliveryThe contract specifies the supply and delivery of one military specification flashlight identified by NSN 6230016134312 to Marine Corps Air Station New River in North Carolina, with delivery terms set at FOB Destination, meaning the seller bears all shipping risks and costs until the item arrives at the designated location. The flashlight must be shipped using a traceable method to ensure accountability throughout transit, and the vendor is required to submit an electronic invoice through the Wide Area WorkFlow system to comply with Department of Defense procurement procedures. The solicitation falls under the NAICS code 423840 for miscellaneous durable goods merchant wholesalers and is managed by the Defense Logistics Agency under the Department of Defense, with the contract issued as a subcontract and posted on August 7, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Fluid Filter Element SupplyThe contract entails the supply of a single military-spec fluid filter element identified by part number 1R1807 and national stock number 2910015193768, with all packaging required to meet compliance standards ensuring proper handling and traceability throughout logistics. The item must be shipped FOB destination to Fort Bragg, North Carolina, with full traceability maintained from origin to delivery point. Invoicing must adhere to DFARS requirements to ensure regulatory compliance across financial and contractual obligations. The procurement is classified as a subcontract under NAICS code 423840 and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 7, 2026, and is linked to contract SPE7LX26FB4Y8 with the reference number 207587.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Installation Parts Kit (NSN: 2540016606081)The contract requires the procurement, packaging, labeling, and delivery of a single industrial parts kit identified by NSN 2540016606081 to Joint Base Lewis-McChord in Washington. No installation, integration, or technical support is needed; the deliverable is strictly the completed kit in ready-to-receive condition. The work falls under NAICS code 423840, indicating it is related to wholesale trade of machinery and equipment, and is structured as a subcontract under the Defense Logistics Agency, aDepartment of Defense entity. The solicitation was posted on August 7, 2026, and the contract is administered through DIBBS under award number SPE7LX26FB4R5 with reference count 207535. All logistical responsibilities, including proper documentation and compliance with military shipping standards, rest with the contractor to ensure timely and accurate fulfillment.

Defense Logistics Agency

POSTED

DEADLINE

Fire Extinguisher Component Parts SupplyThis contract is for the supply of OEM or certified equivalent replacement parts specifically for wheeled Halon extinguishers, encompassing critical components such as valves, hoses, nozzles, gaskets, pressure gauges, wheels, and structural hardware. The requirement is structured as a subcontract under a Small Business Set Aside Total designation, meaning only small businesses are eligible to respond, ensuring opportunities for smaller enterprises to participate in defense-related procurement. The North American Industry Classification System code 423840 categorizes this as wholesale trade of hardware and plumbing and heating equipment and supplies, aligning with the nature of the parts being procured. All deliveries are to be performed at a designated location with a zip code of 29044, indicating the primary site of performance is in South Carolina. The solicitation was posted on August 7, 2026, with a firm deadline for responses on August 13, 2026, at 4:00 PM Eastern Time, allowing a six-day window for interested parties to submit proposals. The contracting activity falls under the Department of Defense, specifically the W7NZ Uspfo Activity Scang 169 office, which is responsible for managing this procurement to support operational readiness and maintenance of fire suppression systems. While no point of contact is listed in the metadata, interested vendors must ensure compliance with all technical and certification standards for replacement parts to qualify, and all submissions must be made through the official SAM.gov portal linked in the posting.

W7NZ Uspfo Activity Scang 169

POSTED

DEADLINE

W168A-26MK07 Non-food Kitchen Supplies

Solicitation # WS5814701889

The Department of National Defence in Denwood, Alberta is seeking qualified Canadian suppliers and suppliers from applicable trading partners to enter into a Regional Individual Standing Offer for the supply, delivery, and offloading of non-food operational kitchen supplies on an as-needed basis. This solicitation, identified as WS5814701889 and titled Non-food Kitchen Supplies, is open exclusively to suppliers from Canada or countries covered under the Policy on Reciprocal Procurement; submissions from non-trading partners will be automatically rejected. The requirement covers various quantities of non-food items essential for kitchen operations, with deliveries triggered by request throughout the term of the standing offer. Offers must be submitted no later than August 25, 2026 at 7:00 PM Eastern Time, with no exceptions made for late submissions. The solicitation is managed by the Government of Canada through Public Services and Procurement Canada, with Lyland Wiebe serving as the primary contracting authority and point of contact. The place of performance is in Alberta, and all responses must comply with the stated eligibility criteria and procurement policy. Interested suppliers are directed to the official Canada Buys portal for full details and submission instructions.

Department of Public Works and Government Services

POSTED

DEADLINE

Fire Hydrant Replacement Parts & Accessories Supply

POSTED

DEADLINE

in about 1 month

Supply of Fire Extinguishers and Replacement UnitsThe City of Dallas is seeking qualified subcontractors to supply new fire extinguishers compliant with NFPA and OSHA standards for replacement or new installation across city facilities. The required units include ABC, CO2, and water-based extinguishers, all of which must meet current regulatory requirements for safety and performance. Delivery is to be made FOB Dallas, meaning the vendor is responsible for all shipping logistics and costs until the goods reach the designated delivery point within the city. This requirement applies to multiple city locations and demands consistent quality and adherence to established safety codes. The solicitation, posted on August 6, 2026, has a response deadline of September 4, 2026, and falls under NAICS code 423840, which corresponds to Wholesale Trade of Hardware, Plumbing, and Heating Equipment and Supplies. Submissions must be completed by the specified deadline to be considered, and no set-aside provisions have been designated for small, minority-owned, or other targeted business categories. All interested parties should review the opportunity through the designated portal to ensure full compliance with submission guidelines and technical requirements.

POSTED

DEADLINE

Pump Spare Parts Supply & Management

Department of Administrative Services

POSTED

DEADLINE

N5523626Q0109 - USS HALSEY (DDG-97), VARIOUS NON-MIL-SPEC HOSE ASSEMBLIES FOR NITROGEN

Solicitation # N5523626Q0109

The Southwest Regional Maintenance Center is conducting market research under FAR Part 12 to gauge industry interest and capability in supplying various non-MIL-SPEC hose assemblies for nitrogen use on the USS HALSEY, with a targeted delivery date of September 1, 2026. This sources sought announcement is designated as a Total Small Business Set-Aside under NAICS code 339991, focusing on gasket, packing, and sealing device manufacturing, and is intended to inform future acquisition planning rather than initiate an immediate contract award. Vendors are invited to voluntarily submit a letter of interest containing their company name, SAM Unique Entity ID, business size, contact details, and a brief description of their capabilities relative to the product requirements, including any available lead times. All submissions must be received by 6:00 PM PST on July 25, 2026, and sent via email to the designated point of contacts. Participation carries no obligation from the government, does not entitle respondents to a response or claim, and involves no cost to the government. The office is located in San Diego, California, and responses will be used solely to assess market readiness for a potential future procurement.

Southwest Regional Maintenance Center

POSTED

DEADLINE

Solicitation # Z4948

The contract calls for the procurement of fuel filters specifically approved for Mercedes Benz and Detroit Diesel 15-liter engines, with the approved manufacturer part number being MER-BENZDDE/A5410900151. This solicitation, identified by number Z4948, is issued by Nashville Electric Service under the Tennessee state agency, targeting commercial suppliers capable of providing certified diesel fuel filtration components that meet exacting technical specifications for heavy-duty engine applications. The solicitation is open to all eligible vendors without specific set-aside designations, and responses must be submitted by the deadline of August 12, 2026, at 7:00 PM Eastern Time. All performance and delivery obligations are centered in Nashville, Tennessee, with no alternate locations specified. The primary point of contact for questions and submissions is Alan Martinez, Procurement Contact, reachable via email at amartinez@nespower.com or phone at 615-747-3720. Interested parties can access the full solicitation details and submission portal through the official vendor portal at https://vendor.nespower.com/?bid=Z4948. The posting date of August 6, 2026, marks the official opening of the bidding window, and participation requires strict adherence to the stated technical requirements and submission deadlines to ensure consideration.

Nashville Electric Service

POSTED

DEADLINE

Defense-Compliant Packaging and Marking ServicesThe contract requires delivery of military-compliant packaging and labeling services aligned with DLA RP001, MIL-STD-2073-1E, and MIL-STD-129 standards, encompassing the full preparation of items for defense shipment including thorough cleaning and drying processes, adherence to specified container specifications, and proper marking and documentation for FOB origin shipment. All work must meet rigorous Department of Defense requirements to ensure durability, traceability, and compliance throughout the supply chain. The performance location is designated as Greensboro, North Carolina, with a zip code of 27409, and the work falls under NAICS code 423840 for wholesale trade of machinery and equipment. The solicitation is issued as a subcontract under the Land Supply Chain division of the Department of Defense, with a posted date of August 5, 2026, and a firm response deadline of August 17, 2026. Interested parties must submit proposals through the DIBBS platform using the provided solicitation link, and all deliverables must be fully compliant with federal military packaging and marking regulations to qualify for award. There is no set-aside designation or special procurement category specified, and the contract does not include a designated point of contact, requiring vendors to navigate the solicitation details directly through the provided online portal.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

DECK BOX OPERATOR, V

Solicitation # SPE7MC-26-T-186P

The contract is for the procurement of one unit of Deck Box Operator, V, identified by NSN 4820-01-521-1101, under solicitation SPE7MC-26-T-186P, issued by the Defense Logistics Agency. Delivery is required within 20 days to FPO AP 96632 aboard the USS THEODORE ROOSEVELT CVN 71, with terms FOB destination and zero variance allowed in quantity. The item must be packaged in strict accordance with MIL-STD-2073-1E and MIL-STD-129, using DLA-approved packaging procedures and codes, including unit container D3 and pack code U. The shipment must avoid parcel post and instead be dispatched by the fastest traceable means with DLA Vendor Shipment Method (VSM) and RDD 777 designation. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as specialized instruments or sensors as defined by NAVSEA, and any exempted fluorescent lamps or instruments must include a secondary containment and be shock-proof per NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendments. The item shall be inspected and accepted at the delivery point, and special marking is not required. The contract is classified under NAICS 332911 and was posted on August 9, 2026, with responses due by August 20, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

AIR CONDITIONER

Solicitation # SPE8E8-26-T-5113

The contract pertains to the procurement of six air conditioners, identified by NSN 4120016491002 and part number 38203-0666 from AIRXCEL, INC., under solicitation SPE8E8-26-T-5113. Delivery is required within 20 days of contract award, with shipment FOB destination, and inspection and acceptance occur at the delivery point. No variance in quantity is permitted, with zero percent plus or minus tolerance. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory labeling per MIL-STD-129 and palletization as specified in RP001. The unit of issue is each, with a total price of $6.00 per unit, totaling $36.00 for the order. The destination for delivery is Fleet Activities Sasebo, PSC 476 Box 1, FPO AP 96322-0001, United States, with an alternate freight shipping address in Sasebo, Japan. Transportation instructions are governed by DLAD Proc Note C19 and C20. The original required delivery date is August 5, 2026, and the contract is administered by the Defense Logistics Agency under the NAICS code 333415, with primary point of contact Alexis Selby. All supplies are subject to the rules regarding covered defense information and the removal of government identification from non-accepted items.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-187Y

A single check valve with a steel body and stainless steel trim is required, designed for a maximum operating pressure of 150 psi and a maximum temperature of 180 degrees Fahrenheit, with flange-type end connections and an end-to-end length of 4.12 inches nominal. The valve body may be manufactured from bar stock ASTM A36 alloy AISI 1018 as an acceptable alternative to the original cast material. The contract specifies strict compliance with DLA packaging requirements and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The use of Class I ozone depleting chemicals is prohibited, and mercury or mercury-containing compounds may not be intentionally added or come into direct contact with the hardware, except for specific functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; in those cases, portable devices must be shockproof and include a secondary containment boundary. This is classified as a critical application item with authorized part numbers from Admiral Valve LLC. Only one unit is required, to be delivered within 20 days FOB origin with zero variance in quantity, inspected and accepted at destination under MIL-STD-2073-1E packaging guidelines and MIL-STD-129 marking requirements. Palletization must align with DLA standards, and shipment must be sent by the fastest traceable means—parcel post is expressly prohibited. The delivery address is the Nuclear Power Training Unit in Goose Creek, South Carolina, and the contract was issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-187Y with a required delivery date of August 3, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186G

The contract specifies the procurement of a single valve body with NSN 4820-01-337-4114 and part number 6839586 for Allison Transmission Inc or 2AX532 for Oshkosh Defense LLC under solicitation SPE7MC-26-T-186G. The item must be delivered in one unit within ten days of award, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination location, Fort Bliss, Texas, where the shipment must be sent via the Redball Express system using the fastest traceable means, explicitly excluding parcel post. Packaging must comply with ASTM D3951 and MIL-STD-129, following DLA Packaging Requirements for Procurement, with unit packaging and palletization strictly adhering to specified standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards. The contract includes detailed shipping and marking instructions, including the military freight address, project code, and government-only identifiers, and the required delivery date is August 5, 2026. The official point of contact is Paula McClary, reachable via email and phone, with additional compliance and ordering details accessible through the DLA eProcurement portal.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186N

The contract specifies the procurement of a single globe valve made of 316 stainless steel with a 1/4 inch female NPT connection, designated by NSN 4820-01-042-2921 and part numbers 3008143-1 and 4251F4Y, for use in high-pressure, high-temperature environments up to 2000 PSI and 600 degrees Fahrenheit, primarily for end item storage and recharging applications. It is classified as a critical application item with strict compliance requirements, including zero tolerance for intentional mercury or mercury-containing compounds in direct contact with the hardware, except for specific exceptions like batteries, fluorescent lamps, sensors, and weapon systems, which must meet additional containment standards per NAVSEA 5100-003D. The valve must adhere to all technical and quality requirements referenced from the DLA Master List, and packaging must conform to MIL-STD-2073-1E and MIL-V-3, with Level A preservation when ZZ is used as the preservation method. Marking and labeling must follow MIL-STD-129 without special codes, and palletization must meet DLA packaging guidelines. Delivery is required within 20 days FOB destination to the USS THEODORE ROOSEVELT CVN 71, FPO AP 96632, via the fastest traceable means—not parcel post—with a required delivery date of August 10, 2026, and shipment must be coordinated using RDD 777 and the DLA Vendor Shipment Module. The contract is issued under solicitation SPE7MC-26-T-186N with a fixed quantity of one unit, no allowable variance, and inspection and acceptance occurring at destination.

Industrial Valve Manufacturing

POSTED

DEADLINE

VALVE, FLOW CONTROL

Solicitation # SPE7MC-26-T-187T

The contract is for the procurement of four flow control valves, identified by NSN 4820011979566 and part number 025-11046, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. Delivery is required within five days of contract award, with shipment originating from the supplier and delivered FOB origin to the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The unit price is $4.00 per valve, totaling $16.00 for the full order, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-V-3, including preservation methods specified as Level A when ZZ is used, and marking must adhere to MIL-STD-129. Palletization and packaging requirements follow DLA’s RP001 standards, with no special marking codes applied. Inspection and acceptance occur at origin, and the item is classified as a critical application component. The contract is issued under solicitation SPE7MC-26-T-187T, with a response deadline of August 20, 2026, and is managed by the Defense Logistics Agency under NAICS code 332911. Technical and quality requirements are incorporated by reference from the DLA Master List, and the latest revisions in effect on the solicitation issue date govern compliance. The point of contact for inquiries is Chad Zernis, with the delivery scheduled for January 14, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

PLATE, INSTRUCTION

Solicitation # SPE8E6-26-T-4163

This contract pertains to the procurement of a single unit of Plate, Instruction, identified by NSN 9905-01-090-7680 and part number 3561030, under solicitation SPE8E6-26-T-4163. The item is subject to specific DLA packaging requirements as outlined in the DLA Master List of Technical and Quality Requirements, with applicable technical standards referenced by R and I numbers. It is classified as a Type I (Code M) item with a non-extendable 24-month shelf life, requiring special marking code 32 to indicate this requirement. Packaging must comply with MIL-STD-2073-1E, including preservative methods, wrap materials, and unit container specifications, while marking must adhere to MIL-STD-129. The shipment must be transported via traceable means, excluding parcel post, to the designated delivery point at Rapid City, SD, with delivery due within 10 days of contract award and no tolerance for quantity variance. The contract specifies FOB origin delivery, with inspection and acceptance occurring at the destination. The Government retains control over the item’s handling and disposition, with specific instructions for removal of government identification from non-accepted supplies. The supply chain data includes the supplier address, shipment details through W8WP SD ARNG CSMS 2, and mandatory reporting identifiers such as RDD E, project TP 2, and supplier code W81LBJ. The contract is governed by DoD unit-of-issue standards, and Covered Defense Information provisions apply. The contract is issued by the Defense Logistics Agency under NAICS code 339950, with Brett Scull designated as the primary point of contact. The solicitation closed on August 20, 2026, with an original required delivery date of August 5, 2026, and all contractual obligations must be fulfilled within the prescribed parameters.

Sign Manufacturing

POSTED

DEADLINE

COATING KIT, RAIN ER

Solicitation # SPE8ES-26-T-2548

The contract pertains to the procurement of a Coating Kit, Rain ER, identified by NSN 8010-01-580-5987 and part number FP-100CM, with a quantity of four kits, each unit of issue being a KT. Delivery is required within 20 days to Edwards Air Force Base, California, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. The item is classified as a TYPE 2, CODE 4 shelf-life item with a 12-month extendable shelf life, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards. Packaging and shipping must adhere to DLA packaging requirements, including specific hazardous materials handling protocols under IP025, and traceable freight methods only are permitted—parcel post is prohibited. The supplier, CAAP CO., INC., must submit Safety Data Sheets and compliant Hazardous Communication Standard labels in accordance with 29 C.F.R. 1910.1200, effective June 1, 2015, and ensure employee training on these new requirements. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the acquisition type and solicitation timeline. The procurement is under solicitation SPE8ES-26-T-2548, with a response deadline of August 17, 2026, and the original required delivery date set for August 6, 2026.

Paint and Coating Manufacturing

POSTED

DEADLINE

HARNESS ASSEMBLY, MASK,

Solicitation # SPE8E6-26-T-4162

The contract pertains to the procurement of a harness assembly for an oxygen mask, identified by part number 460-190-457 and NSN 4240-01-392-6079, with a quantity of ten units to be delivered FOB origin within twenty days. The supplier, Interspiro Inc., is required to comply with all technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and governed by the revision in effect at the time of solicitation or award. Packaging must adhere to MIL-STD-2073-1E, with specific methods including preservation, labeling, and containment standards, and must follow MIL-STD-129 for marking, strictly prohibiting the use of plastics for wrapping or cushioning where feasible. Delivery is to be made to the Southwest Regional Maintenance Center in San Diego, with hazardous material shipping instructions directing delivery to Building 3322T, and parcel post is explicitly prohibited; shipping must occur via the fastest traceable method. Inspection and acceptance occur at the destination with no variance allowed in quantity. The contract, issued under solicitation SPE8E6-26-T-4162, carries a unit price of $10.00 for a total value of $100.00 and includes restrictions on the handling of covered defense information. The required delivery date is August 10, 2026, and the contract includes specific government use codes for tracking and logistics.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-186H

A safety relief valve with NSN 4820-01-588-7177 and part number 517.00005.3 is being procured by the Defense Logistics Agency under contract SPE7MC-26-T-186H, with a single unit requirement to be delivered within ten days of contract award. Delivery is FOB origin and must comply with stringent packaging standards per ASTM D3951 and MIL-STD-129, while adhering to DLA’s Master List of Technical and Quality Requirements, which override any conflicting specifications. The item must be packaged and palletized according to RP001 DLA Packaging Requirements, with no quantity variance permitted. The destination for delivery is Fort Riley, Kansas, with shipment required via the fastest traceable means, excluding parcel post, and marked with the official military shipping identifier W55XGJ and RDD 555. The contract specifies that all labeling and documentation must reflect government standards, and the item must be inspected and accepted at the destination. The solicitation was issued on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is August 5, 2026. The point of contact for inquiries is Paula Mcclary, reachable via email and phone provided in the contract documentation.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186E

The contract pertains to the procurement of a single DISK, VALVE with NSN 4820012210266, supplied by HUNT VALVE COMPANY, INC. under solicitation SPE7MC-26-T-186E. The item is required in a quantity of one unit with a delivery deadline of 20 days from the award, delivered FOB destination, and subject to zero variance in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and all markings must adhere to MIL-STD-129 without special codes. Palletization follows DLA packaging requirements, and the shipment is addressed to USS BOXER LHD 4 at FPO AP 96661. The item is to be shipped via vessel under DLAD PROC NOTE C19 and C20, with a required delivery date of August 5, 2026. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, particularly excluding intentional use of mercury or mercury-containing compounds in or on the hardware, with limited exceptions for approved functional applications like certain batteries or instruments, which must include secondary containment as per NAVSEA 5100-003D. All supplies must be free of government identification if non-accepted, and the unit of issue is the individual piece (EA). The Defense Logistics Agency issues this solicitation under NAICS code 332911, with Paula Mcclary listed as the primary point of contact. The delivery is part of a larger logistical effort identified under project 9AL TP 2 and requires use of the VSM system for vendor shipment coordination.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2546

This contract pertains to the procurement of 100 ounces of adhesive with NSN 8040-01-420-0999 under solicitation SPE8ES-26-T-2546, issued by the Defense Logistics Agency. The adhesive must comply with multiple technical and quality standards including SAE AMS-S-8802F, MIL-STD-129R, MIL-STD-147F, and Federal Standard 313F, and is classified as a Type I (Code G) item with a non-extendable shelf life of nine months. All hazardous materials must be accompanied by Safety Data Sheets (SDS) formatted to 29 C.F.R. 1910.1200 standards and labeled in accordance with the Globally Harmonized System, with supplier training on these requirements mandatory prior to award. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, including specific marking per MIL-STD-129 and the special code 32 indicating Type I shelf life. Palletization and shipping must adhere to RP001 and IP025 for hazardous materials, with freight shipped via traceable means only and no parcel post permitted. Delivery is FOB destination within 20 days of award to Fort Benning, Georgia, with zero variance allowed in quantity and inspection and acceptance occurring at the delivery point. The contract calls for full compliance with DLA’s Master List of Technical and Quality Requirements, and the unit of issue is the ounce as defined by DoD standards.

Adhesive Manufacturing

POSTED

DEADLINE