This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Tungsten Alloy Metal Bar (Flat Stock)

Closed

Federal

Submission Closed07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE4A5-26-T-337B

The contract pertains to the procurement of 18 units of a “KEY, MACHINE” item, identified by NSN 5315011674149 and part number 731833 from Hamilton Sundstrand Corporation, under solicitation SPE4A5-26-T-337B. Delivery is required FOB ORIGIN, with a 166-day performance period from award, and the item must be delivered to DLA Distribution Depot Oklahoma at Tinker Air Force Base by January 31, 2027, with an original delivery deadline of January 31, 2028. The item is classified as a commercial item and a critical application item, with no requirement for Item Unique Identification per DFARS 252.211-7003(c)(1)(i). Packaging must adhere to ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all packaging and labeling must comply with MIL-STD-129, including physical identification of bare items per RQ017 and palletization per RP001. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot unless otherwise specified, with verification levels of VII, IV, and II and corresponding AQLs of 0.1, 1.0, and 4.0 assigned to critical, major, and minor attributes respectively. Inspection and acceptance occur at the destination, with the government responsible for verification. The contract incorporates numerous FAR and DFARS clauses, including those for combating trafficking in persons, employment eligibility verification, sustainable products, cybersecurity compliance with NIST SP 800-171, hazardous material identification with labeling per 252.223-7001, and contract modifications. The contract clause 52.227-1 with alternates I and II addresses authorization and consent for government use of technical data. All offerors must be registered in SAM, submit proposals via the DLA-BSM IBBS portal by August 17, 2026, and comply with required representations regarding small business status, unique entity identifier, CAGE code, and covered defense telecommunications equipment. No contract pricing details are provided, indicating the contract may be awarded on a lowest price technically acceptable basis. The

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-14QL

The contract under solicitation SPE4A6-26-T-14QL is for the procurement of 386 units of the item identified as KEY,MACHINE with NSN 5315012070478, manufactured by Honeywell International Inc. and designated by part number 73563-8. Delivery is required within 145 days of order receipt, with an original delivery deadline of December 29, 2026 and a need ship date of January 10, 2027, under FOB Origin terms to the DLA Distribution Depot in Tinker AFB, Oklahoma. The item is subject to stringent technical and quality requirements referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951 for packaging. Marking and labeling must adhere to MIL-STD-129 and MIL-STD-130 for bare item identification, with palletization compliant with RP001 DLA Packaging Requirements. Sampling protocols require MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes must be verified at AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major, and zero non-conformances mandatory unless otherwise stated. The manufacturer must maintain an inspection system compliant with SAE AS9003 or ISO 9001 tailored to AS9003, and additive manufacturing is prohibited unless specifically authorized. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and includes all applicable Federal Acquisition Regulation clauses covering cybersecurity, whistleblower protections, export controls, cyber incident reporting, prohibition of hexavalent chromium, prohibited procurement from Communist Chinese military companies, electronic payment via WAWF, and compliance with NIST SP 800-171. Packaging and hazardous material labeling must conform to the Hazard Communication Standard, with full documentation of disclosures and safety data sheets required prior to award. The contract requires all offerors to maintain current representations in the System for Award Management, including small business status, and to affirm compliance with prohibitions on covered defense telecommunications equipment. Proposals must be submitted via DIBBS by August 17, 2026, and the award will be subject

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Valve Body Casting Manufacturing

Defense Logistics Agency

POSTED

DEADLINE

Precision Metal Casting and Foundry Services

Defense Logistics Agency

POSTED

DEADLINE

Supply of Class 1 Castings for Pump ComponentsThis contract involves the supply of precision steel investment castings that comply with MIL-STD-2175 Class 1 standards, intended for use in axial piston pump assemblies. The contract emphasizes stringent requirements for full traceability and defense-grade quality control to ensure the highest level of reliability and performance for military applications. The work will support the Department of Defense, specifically through the DLA Aviation office in Oklahoma City, reflecting the contract’s focus on meeting rigorous military specifications. As a subcontract opportunity under NAICS code 331523, the contract aims to secure high-quality castings essential for critical pump components. While location details and points of contact are not specified, the solicitation was posted in March 2026 and aligns with defense industry standards and requirements. The contract underlines the importance of adherence to tight quality assurance processes and full documentation to meet the demands of defense procurement.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Class 1 Casting Supply for Actuator Components

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Specialized Metal Casting or Forging SupplyThe contract involves the supply of raw or semi-finished valve body housings that are either forged or cast, with stringent requirements for high-pressure integrity and material traceability. These components must meet specific defense standards, ensuring reliability and quality suitable for military applications. The procurement is managed by DLA Aviation under the Department of Defense, emphasizing the strategic importance of the materials and the critical nature of compliance with rigorous specifications. Performance of the contract is expected to take place in Richmond, with a focus on providing specialized metal castings or forgings classified under the NAICS code 331523. As a subcontract opportunity posted in early November 2025, this contract does not specify a set-aside type, indicating it may be open to a broader supplier base capable of meeting the demanding technical and quality assurance requirements essential for defense-related manufacturing.

DLA Aviation

POSTED

9 months ago

DEADLINE

N/A

AI Contract Overview

The contract requires the supply of one flat tungsten alloy metal bar designated as UNS R07050, manufactured and delivered in full compliance with applicable military specifications. This includes all necessary packaging, marking, and labeling to meet defense standards, with delivery terms set at FOB Origin, meaning the buyer assumes responsibility for transportation and associated costs once the item leaves the supplier’s facility. The item is intended for performance at Tinker AFB, Oklahoma, with a zip code of 73145-9031, and the acquisition is classified under NAICS code 331523, which corresponds to forging and stamping operations. The contract is structured as a subcontract and is subject to a Total Small Business Set-Aside under Federal Acquisition Regulation 19.5, limiting eligibility exclusively to small businesses certified by the Small Business Administration. The solicitation was posted on July 16, 2026, with responses due by July 24, 2026, and is managed by the Defense Logistics Agency under the Department of Defense. All work must be completed and delivered within the specified timeline, and the supplier is expected to meet all technical, procedural, and administrative requirements without deviation.

General Info

Small business subcontract for one UNS R07050 tungsten bar, FOB Origin, for Tinker AFB, due July 24, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

331523 - Nonferrous Metal Die-Casting FoundriesView NAICS

Place of Performance

TINKER AFB, OK, 73145-9031, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE8E4-26-Q-0303.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BAR, METAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 16

subcontract

Response DeadlineJul 24

Deadline has passed

Submission Closed

07/24/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of one flat tungsten alloy metal bar (UNS R07050) per military specifications, including packaging, marking, and delivery under FOB Origin terms.