Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Water Closet Repair Parts Kit (NSN 4510-01-560-8861)

Active

Federal

Response Deadline08/15/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture or supply of a fully assembled water closet repair parts kit identified by NSN 4510-01-560-8861, adhering strictly to DLA specifications, NAVSEA mercury restrictions, and MIL-STD-129 packaging standards. The parts kit must be fully assembled and ready for immediate use, ensuring compatibility and compliance with military plumbing systems while eliminating hazardous mercury content as mandated by NAVSEA. All packaging must conform to MIL-STD-129 to ensure proper labeling, protection, and handling during transit and storage within the Department of Defense supply chain. The solicitation is issued by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance scheduled for delivery to the location in NEW CUMBERLAND, Pennsylvania, ZIP 17070-5002. The contract falls under NAICS code 332913, indicating it is related to plumbing fixture manufacturing. It is classified as a subcontract opportunity with no specified set-aside type, and responses must be submitted by August 15, 2026. bidders must ensure full technical compliance with all referenced military standards and provide documentation verifying adherence to material restrictions and packaging protocols. Further details and submission guidelines are available via the provided DIBBS link.

General Info

Supply fully assembled water closet repair kit per military specs, no mercury, MIL-STD-129 packaging, deliver to New Cumberland, PA by August 15, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332913 - Plumbing Fixture Fitting and Trim ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 15

Submission deadline

Response Deadline

08/15/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture or supply of a fully assembled water closet repair parts kit compliant with DLA specifications, NAVSEA mercury restrictions, and MIL-STD-129 packaging requirements.

Similar Contracts

Same NAICS industry code

Solicitation # SPE8E8-26-T-5115

The contract is for the procurement of 200 units of a FLUSH VALVE identified by NSN 4510-01-579-3370 under Purchase Request 7017800109, with a delivery requirement of 75 days after award. The solicitation number is SPE8E8-26-T-5115, issued on August 9, 2026, with responses due by August 20, 2026. This is a Women-Owned Small Business Set-Aside under NAICS code 332913, managed by the Department of Defense through its San Diego office, with performance location at 92136-3581. All supplied items must comply with the DLA Master List of Technical and Quality Requirements, where referenced technical and quality standards are identified by R or I numbers and are incorporated by reference, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless superseded by an amendment. Non-accepted supplies must have government identification removed as per RQ011 requirements. The primary point of contact is Alexis Selby, reachable via email and phone provided in the contract data.

POSTED

about 1 hour ago

DEADLINE

Supply of Gate Valve (NSN 4820-01-656-8182)The contract entails the procurement and delivery of a single gate valve identified by NSN 4820-01-656-8182, designed to meet stringent federal and military specifications for form, fit, function, and durability. The supplier is responsible for end-to-end execution including sourcing compliant materials, conducting rigorous testing to ensure performance under operational conditions, and adhering to precise packaging and labeling requirements as mandated by the Defense Logistics Agency. All activities must align with DLA standards to guarantee readiness for military deployment and integration into existing systems. This subcontract, issued under NAICS code 332913 by the Department of Defense through the Defense Logistics Agency, is scheduled for performance following its posting date of August 7, 2026. The contract does not specify a set-aside type or location details, indicating it is open to eligible vendors without geographic or socioeconomic restrictions. Delivery and compliance outcomes are critical, as the valve must be fully functional and traceable through documented verification processes upon receipt. The award reference number SPE7M126V7243 is linked to official DIBBS records for tracking and accountability purposes.

Defense Logistics Agency

POSTED

DEADLINE

Unit and Container Labeling ServicesThe contract entails providing compliant labeling and marking services for unit, intermediate, and shipping containers in accordance with ZD072 requirements, ensuring all necessary identifiers such as NSN, contract number, lot number, CAGE codes, and part numbers are accurately applied. The work supports defense logistics operations under the Department of Defense, specifically managed by the Defense Logistics Agency, and is structured as a subcontract under NAICS code 332913, which pertains to other fabricated metal product manufacturing. The labeling must meet exact military standards to ensure traceability, compliance, and operational readiness across the supply chain. The solicitation was posted on August 7, 2026, and performance is governed by the referenced contract award SPE7LX22D0149 with delivery order SPE7LX26F89S9, though no specific location for performance or point of contact is provided.

Defense Logistics Agency

POSTED

DEADLINE

146555 PUMP-CRITICAL SPARES

Solicitation # 231338

The City of Los Angeles is soliciting bids for critical pump spares under solicitation number 231338, with a response deadline of August 22, 2026. This opportunity is targeted at vendors capable of supplying essential replacement components for pump systems critical to municipal operations, ensuring continuity and reliability of infrastructure services. The contract is managed by the City of Los Angeles Department of Water and Power, with Eric P. Lau listed as the primary contact for inquiries, and all correspondence must be directed to him at eric.lau@ladwp.com. Bidders are required to register on the City’s official procurement portal to participate, and failure to comply with registration protocols may disqualify their submissions. The place of performance is specified as Los Angeles, CA 90012, and all supplies must meet the operational and technical standards required by the City’s utility systems. While the solicitation does not specify a NAICS code or set-aside classification, interested parties must verify all requirements directly through the official bidding portal linked in the notice, as third-party aggregators like Biddingo.com provide only informational summaries and bear no responsibility for the accuracy or completeness of the bid details. Any questions regarding the terms, specifications, or submission process must be addressed to the originating agency.

City of Los Angeles

POSTED

DEADLINE

Sub-tier Supplier Management for Critical Components

POSTED

DEADLINE

Commercial Valve Supply – Check Valve (NSN 4820013398489)The contract calls for the supply of one commercial off-the-shelf check valve identified by NSN 4820013398489, manufactured to meet military specifications. The item is categorized under NAICS code 332913, indicating it falls within the manufacturing of other fabricated metal product industries, and is being procured as a subcontract under the Department of Defense. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, providing a twelve-day window for submissions. Performance of the contract is to be fulfilled at the New Cumberland facility, with a zip code of 17070-5002, though no specific city or state is listed for the agency's office address. The contract is managed by the DDSP New Cumberland Facility, and interested parties may access further details via the provided DIBBS link.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Metallic Tubing Supply (Precision Cut-to-Length)The contract involves the supply of metallic tubing precision-cut to specified lengths under an IDIQ vehicle, ensuring full compliance with federal and military standards for packaging, labeling, and hazardous materials handling. The work supports Department of Defense logistics through the Defense Logistics Agency and falls under NAICS code 332913, which covers other fabricated metal product manufacturing. All deliveries must adhere strictly to military specifications to ensure safe transport, proper identification, and regulatory compliance throughout the supply chain. This is a subcontract under a larger procurement structure, with performance obligations tied to the needs of the Department of Defense as determined through subsequent task orders. The contract does not specify a fixed quantity but establishes a framework for ongoing requirements, allowing the government to issue individual orders over the contract period. The place of performance and point of contact details are not provided, but all materials must be delivered in accordance with federal hazardous materials regulations and military packaging protocols to maintain operational readiness and safety compliance.

Defense Logistics Agency

POSTED

DEADLINE

Defueling Tube Manufacturing and SupplyThe contract entails the manufacture and supply of a single defueling tube identified by NSN 4710002386158, designed to meet rigorous military specifications for form, fit, and function. This item is critical for operational support and must be produced to exacting standards to ensure compatibility and reliability in defense logistics. The solicitation is structured as a subcontract under the NAICS code 332913, indicating it falls within the manufacturing sector for other fabricated metal products. The posting date is August 5, 2026, with a response deadline of August 17, 2026, providing interested parties a twelve-day window to submit proposals. The contracting entity is the Maritime Supply Chain ESOC Buys division within the Department of Defense, reflecting its alignment with broader defense supply chain initiatives, though specific performance location and point of contact details are not provided. The procurement is accessible through the DIBBS platform, and all submissions must comply with the technical and procedural requirements outlined in the solicitation.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Globe Valve Supply (NSN 4820-01-665-5444)

Defense Logistics Agency

POSTED

DEADLINE

Precision Valve Manufacturing and AssemblyThe contract calls for the manufacture and final assembly of a military-specification valve assembly adhering strictly to Defense Logistics Agency standards, with full compliance required across configuration control, first article testing, and compliant packaging protocols. This subcontract targets the production of a critical component meant for defense applications, ensuring rigorous quality assurance and traceability through every phase of fabrication and assembly. The work must be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000, and execution is governed by the NAICS code 332913, which classifies it under Other Fabricated Metal Product Manufacturing. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, giving potential contractors a twelve-day window to submit proposals. The contracting authority is the DLA Dist San Joaquin under the Department of Defense, and the opportunity is not reserved for any specific set-aside category, making it open to all qualified subcontractors. While no point of contact is listed, interested parties are directed to the DIBBS website for full solicitation details, where the complete requirements, technical specifications, and submission guidelines are available for review.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Check Valve Supply (Commercial Off-the-Shelf Component)

Defense Logistics Agency

POSTED

DEADLINE

Commercial Faucet Supply (Drinking Water Fixture)The contract calls for the supply and delivery of seven single-handle faucets, identified by NSN 4510011872555 and model DRINKAMATIC, specifically designed for drinking water applications and fully compliant with Department of Defense technical, packaging, and labeling standards. These fixtures are intended for use within military or government facilities and must meet all specified performance and durability requirements outlined by the Defense Logistics Agency. The work is to be performed with delivery to Tracy, California, with a zip code of 95304-5000, and the contractor is expected to adhere strictly to federal procurement guidelines for quality control and documentation. This subcontract, classified under NAICS code 332913 for plumbing fixture manufacturing, was posted on August 5, 2026, with responses due by August 17, 2026. The contracting activity falls under the Department of Defense through the Construction & Equipment MRO SVC I organization. Although no solicitation number is provided, the contract can be accessed via the DIBBS platform using the provided link. The procurement does not specify a set-aside status, and all bids must align with DLA standards for unclassified defense-related hardware, including proper labeling, secure packaging, and verifiable compliance documentation to ensure seamless integration into military infrastructure.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

ROLL SET, ROLLER TUB

Solicitation # SPE8E5-26-T-3946

The contract pertains to the procurement of a ROLL SET, ROLLER TUB identified by NSN 3456-00-640-3671 with a quantity of four standard units, issued under solicitation SPE8E5-26-T-3946. The item must be delivered FOB origin within 136 days of contract award, with no tolerance for quantity variance, and delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must comply strictly with MIL-STD-2073-1E and MIL-STD-129, including preservation methods as specified, with components packaged as a kit in a single box or multiple boxes clearly labeled as part of a set. Each box must contain an internal inventory list and adequate cushioning to prevent damage during transit. Marking, palletization, and preservation follow DLA’s detailed packaging requirements, incorporating technical and quality standards referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation or award date depending on acquisition size. Transportation and shipping details are governed by DLA procedural notes C19 and C20, and the contract mandates inspection and acceptance at the destination point. The item is subject to Covered Defense Information provisions and must be handled in accordance with federal procurement protocols for defense supply chain requirements.

Machine Tool Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E4-26-T-2040

The contract pertains to the procurement of ARMOR PLATE with NSN 9535017376339 and part number LS1155575, under solicitation SPE8E4-26-T-2040, requiring delivery of ten units within 164 days from the award date. The item is to be delivered FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization in accordance with DLA standards. The delivery address is the DDSP New Cumberland Facility in Pennsylvania, with the need ship date set for February 1, 2027, and the original required delivery date as February 5, 2027. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements and mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment since Covered Defense Information applies. All documentation and source approval submissions must follow the specified procedures, including RC001 for SAR and RQ011 for removal of government identification from non-accepted supplies. Pricing is set at $10.00 per unit for a total of $100.00, with payment terms linked to the CLIN structure. The contract was posted on August 9, 2026, with a response deadline of August 20, 2026, under NAICS code 332313, managed by the Department of Defense through the DDSP New Cumberland Facility, with Pamela Duffey as the primary point of contact.

Plate Work Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7MC-26-T-187B

This solicitation is for 202 check valves, identified by NSN 4820012316654 and part number 8KK352 from OSHKOSH DEFENSE LLC, designated as a critical application item. The valves must meet a thermal relief set pressure of 3000 PSI plus or minus 200 PSI with a maximum operating temperature of 180 degrees Fahrenheit. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and include a second containment boundary per NAVSEA 5100-003D. All packaging and marking must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements RP001, and hazardous materials must be labeled in accordance with 29 CFR 1910.1200. The item is subject to destination inspection and acceptance under FAR 52.246-2, with delivery due 188 days after award at FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates over 30 Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses, including cybersecurity safeguards, whistleblower protections, prohibition of hexavalent chromium and covered telecommunications equipment, and NIST SP 800-171 compliance. Offerors must submit a Safety Data Sheet for any hazardous materials prior to award, or face ineligibility. This is a non-small business set-aside solicitation subject to automated award consideration and HUBZone price evaluation preference. Quotations must be submitted electronically via the DIBBS system by August 20, 2026, and payment must be processed through the WAWF system per DFARS clauses 252.232-7003 and 252.232-7006. The contract includes provisions for control of government personnel work product, restrictions on mandatory arbitration agreements, and requirements to disclose non-domestic materials.

Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

MODULE HYDRAULIC

Solicitation # SPE7MC-26-T-187X

The contract is for the procurement of five hydraulic modules identified by NSN 4820-01-672-7782 under solicitation SPE7MC-26-T-187X, with a response deadline of August 20, 2026, and a delivery requirement of 578 days after order. The acquisition is a total small business set-aside under NAICS code 332911, managed by the Department of Defense through the DDSP New Cumberland Facility. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. Export control regulations apply to technical data associated with this item, subject to ITAR or EAR restrictions, prohibiting unauthorized disclosure to foreign persons regardless of location. Contractors must hold a valid US/Canada Joint Certification Program certification, complete required DOD export control training, and obtain prior approval from DLA to access controlled technical data. DFARS 252.225-7048 governs compliance with these export controls, and government identification must be removed from non-accepted supplies. Primary point of contact for inquiries is Paula McClary, reachable at fmda3302@dla.mil or 614-692-0417.

Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

MARKER, IDENTIFICATI

Solicitation # SPE8E6-26-T-4166

This contract pertains to the procurement of four units of a Type I shelf-life item with the NSN 7690-01-463-1209 and part number LAT-27-361-1, supplied by Brady United States. The item has a non-extendable shelf life of 24 months and must be marked in accordance with MIL-STD-129, including the special marking code 32 indicating its shelf-life status. All packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, specifying preservative methods, unit containers, and palletization standards. The product is classified as a critical application item and must be delivered FOB origin within 150 days of contract award, with no tolerance for variance in quantity. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania, as the final delivery point. The contract is issued under solicitation SPE8E6-26-T-4166 with a required ship date of January 18, 2027, and an original delivery deadline of August 27, 2026. The unit of issue is the individual (EA), priced at $4.00 per unit for a total of $16.00. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with revisions controlled based on acquisition size and amendment dates. Transportation and shipping logistics follow specific DLA procedures, and marking of all items must adhere strictly to MIL-STD-129. The procurement falls under NAICS code 323117 and is managed by the Department of Defense through the DDSP New Cumberland Facility, with Nicholas Mahoney as the primary point of contact.

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E4-26-T-2039

The contract pertains to the procurement of 10 units of ARMOR PLATE with NSN 9535-01-737-6349 and part number LS1155574 under solicitation SPE8E4-26-T-2039, issued by the Department of Defense through the DLA Distribution facility in New Cumberland, Pennsylvania. The item must be delivered FOB origin within 164 days of contract award, with a required ship date of February 1, 2027, and an original delivery deadline of February 5, 2027. The quantity is fixed at 10 units with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specified methods for preservation, wrapping, cushioning, and unit containers, and all marking must adhere to MIL-STD-129 with no special marking codes applied. Palletization follows DLA packaging requirements, and transportation details are governed by DLAD procedural notes C19 and C20. This procurement is subject to cybersecurity compliance requirements under the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment, with covered defense information applicable, necessitating adherence to established cybersecurity controls. Technical and quality standards referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on acquisition size. Documentation requirements for source approval requests and the removal of government identification from non-accepted supplies must also be followed. The unit of issue is each (EA), priced at $10.00 per unit, totaling $100.00. The contract is classified under NAICS code 332313, and the point of contact is Pamela Duffey, with additional administrative oversight from Aaliyah Nuriddin. The procurement is managed through the DIBBS system with the official solicitation link provided.

Plate Work Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E4-26-T-2062

The contract specifies the procurement of 109 feet of hot rolled, annealed 440C stainless steel bar with a diameter of 0.750 inches and a length requirement of exactly 10, 11, or 12 feet in whole increments, with a reference weight of 1.500 pounds per foot. All material must meet the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements and comply with applicable specifications including SAE AMS-QQ-S-763D, MIL-STD-129R, ASTM A700-14, and SAE AMS2806. Each unit must be permanently and legibly marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling methods that do not contaminate or impair performance, and markings must be waterproof and durable. Adhesive labels are required for bars under 0.250 inches in nominal outer diameter, while tags are acceptable for wire. A Certificate of Quality Compliance, commonly known as a mill-certification, is mandatory for every shipment and must accompany the product and be forwarded to the DLA Troop Support Contracting Officer. Supply is restricted to manufacturers and distributors listed on the Qualified Suppliers List for Distributors (QSLD), and any bid based on non-QSLD-sourced material constitutes an exception and must be explicitly declared. Failure to comply with QSLD eligibility may result in criminal penalties in addition to civil remedies. Packaging must conform to MIL-STD-2073-1E and DLA Packaging Requirements, with special packaging codes Z and ZZ aligned to ASTM A700. Marking and packaging must adhere strictly to MIL-STD-129, including the use of vinyl or plastic-coated pressure-sensitive labels on structural shapes and secured lifts. Delivery is FOB origin, with inspection and acceptance occurring at destination within 164 days, and a 10% variance in quantity is permitted. The shipment is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the solicitation is governed under the federal procurement code SPE8E4-26-T-2062 with a NAICS code of 332111.

Iron and Steel Forging

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E4-26-T-2059

The contract specifies the procurement of Nickel Alloy 400 bars in cold-drawn, stress-relieved condition, with a hexagonal cross-section measuring 0.938 inches across flats and lengths ranging from 6 to 20 feet in whole-foot increments, weighing approximately 2.920 pounds per foot. The material must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements and is subject to qualification under the Qualified Suppliers List for Distributors (QSLD), meaning only suppliers listed on the QSLD are eligible for award; any deviation from this requirement must be explicitly declared. The product must be accompanied by a Certificate of Quality Compliance with each shipment, and continuous identification markings on every unit are mandatory, including the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions, applied via stamping or stenciling in a legible, durable, and non-contaminating manner. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with special marking and preservation codes Z and ZZ as defined by ASTM A700, and all units must be palletized according to RP001. Continuous identification is required on each bar, and adhesive labels are permitted for items under 0.250 inches in nominal outer diameter. The delivery is FOB origin, with an acceptance point at destination, and a 10% quantity variance is allowed. The required delivery date is November 28, 2026, with a final ship date of February 1, 2027, and the material must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. All documentation, including CDRL-METALSCERT, must be submitted, and failure to meet any requirement may result in rejection or criminal penalties for unauthorized substitution.

Nonferrous Forging

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7MC-26-T-186V

The contract pertains to the procurement of a valve, angle, with NSN 4820-01-430-2762 and part number VA409443, under solicitation SPE7MC-26-T-186V, which is a Service-Disabled Veteran-Owned Small Business Set-Aside. The quantity required is 113 units, each priced at $113.00, for a total contract value of $12,769.00. Delivery is mandated FOB origin with a lead time of 165 days from the original required delivery date of May 18, 2027, and a need ship date of February 2, 2027. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, and labeled in accordance with MIL-STD-129 with no special marking required. Inspection and acceptance occur at the destination, and quantities are fixed with zero variance allowed. All packaging and palletization must conform to DLA’s packaging requirements, and transportation logistics are governed by DLAD procedural notes C19 and C20. The destination for delivery is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The contract incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and the applicable revision of that list is determined by the solicitation issue date. The contracting office is the Department of Defense, managed by the DDSP New Cumberland Facility, with Paula McCLary as the primary point of contact, reachable via email and phone. The contract was posted on August 9, 2026, with responses due by August 20, 2026, and is classified under NAICS code 332911 for federal procurement.

Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E4-26-T-2073

The contract specifies a metal plate made of aluminum alloy 6061 in temper T651, with exact dimensions of 0.3125 inches thick, 48 inches wide, and 144 inches long, delivered in whole-foot lengths only. The item weighs approximately 212.16 pounds per piece and is identified by NSN 9535-00-231-8232, with a required quantity of nine pieces. Strict compliance with technical specifications is mandated under referenced standards including SAE AMS4027P, MIL-STD-129R, ASTM B666/B666M-20, and ASTM B660-23, with material certification required for every shipment in the form of a Certificate of Quality Compliance, which must accompany each delivery and be forwarded to the contracting officer. Continuous markings on each unit must include the DLA contract number, NSN, specification revision, alloy grade, manufacturer name, heat and lot numbers, dimensions, and temper, with only stamping or stenciling permitted as marking methods—labels required for smaller bars and tubes under 0.250 inches in diameter. The procurement is subject to the Qualified Suppliers List for Distributors (QSLD) requirement, limiting eligibility to suppliers listed on the official QSLD; any deviation must be explicitly declared and may be considered an unauthorized substitution with potential criminal penalties. Packaging must conform to MIL-STD-2073-1E, with preservation and marking following ASTM B660 and additional specified codes, and palletization governed by DLA packaging requirements. Delivery is FOB origin, with inspection and acceptance at destination, and no quantity variance is permitted. The delivery window is 164 days, with an original required delivery date of December 5, 2026, and a need ship date of February 1, 2027, to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. Government information may be potentially classified under RD003, and technical and quality requirements are governed by DLA’s Master List, with contract data requirements such as CDRL-METALSCERT mandatory unless waived under QSL compliance conditions.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 1 hour ago

DEADLINE

LUMBER, NON-WOOD, TIMBER

Solicitation # SPE8E6-26-T-4169

The contract specifies the procurement of 800 units of LUMBER, NON-WOOD, TIMBER under NSN 5675-01-591-4344, with delivery required within 35 days after delivery order. The solicitation number is SPE8E6-26-T-4169, issued under the NAICS code 423310 and managed by the DLA New Cumberland Facility, a Department of Defense entity. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on the acquisition type. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Covered Defense Information requirements may apply, indicating potential handling of sensitive data. The product must meet the exact specifications listed in the purchase item description; only those named products are considered acceptable. The primary point of contact is Tai Nguyen, reachable by phone or email for inquiries, and responses must be submitted by the deadline of August 20, 2026.

Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E4-26-T-2037

The contract pertains to the procurement of 10 units of ARMOR PLATE with NSN 9535-01-737-6312 under solicitation SPE8E4-26-T-2037, issued by the Department of Defense through the DDSP New Cumberland Facility. The unit price is $10.00 per item, resulting in a total contract value of $100.00, with no variance allowed in quantity. Delivery is required FOB origin within 164 days of contract award, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging requirements, and the shipment must be delivered to the specified parcel post address in New Cumberland, Pennsylvania. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and applies to Covered Defense Information. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Transportation logistics are governed by DLAD Proc Notes C19 and C20. The contract is tied to a Federal NAICS code 332313 and was posted on August 9, 2026, with responses due by August 20, 2026. The original required delivery date is February 5, 2027, with a need ship date of February 1, 2027. Point of contact for the contract is Pamela Duffey, reachable via email and phone.

Plate Work Manufacturing

POSTED

about 1 hour ago

DEADLINE