Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Whiteboards

Active

International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the procurement and delivery of six standard whiteboards for use at Port Maria Hospital under the jurisdiction of the North East Regional Health Authority, acting on behalf of the Government of Jamaica. The whiteboards are to be supplied without any requirement for installation, mounting, or technical customization, making the scope limited to transportation and handover of the equipment in its standard form. The procurement falls under NAICS code 339940, indicating it pertains to other miscellaneous manufacturing, likely relating to the production of educational or office equipment. The contract was posted on August 3, 2026, and is classified as a subcontract, suggesting it may be part of a larger procurement initiative managed by the health authority. There is no set-aside designation, and no specific point of contact or place of performance address details are provided beyond the hospital location in Port Maria. The official procurement information can be accessed via the Jamaican E-Procurement Portal, indicating adherence to national government contracting protocols. Delivery is expected to fulfill a basic infrastructure need at the hospital, with no additional services or modifications demanded by the buyer.

General Info

Six standard whiteboards procured for Port Maria Hospital, delivered without installation or customization.

Agency

Government of Jamaica → North East Regional Health AuthorityView Agency

NAICS

339940 - Office Supplies (except Paper) ManufacturingView NAICS

Place of Performance

JAM

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Jamaica → North East Regional Health Authority

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Jamaica → North East Regional Health Authority

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of six standard whiteboards for use at Port Maria Hospital. No installation or technical customization required.

Similar Contracts

Same NAICS industry code

Promotional Item Purchase for MANG Recruiting & Retention Command

Solicitation # W912SV26QA019

The Massachusetts Army National Guard is soliciting commercial promotional items under solicitation W912SV26QA019, a small business set-aside exclusively for concerns certified under NAICS code 339940, with all awards subject to a firm-fixed-price contract. The requirement is for branded personal presentation items including 1,000 sets of customized playing cards, 8,000 black fleece beanies, 2,500 lace-up hoodies, 1,500 football jerseys in black and gold, and 40,000 black ballpoint pens, all featuring approved MAARNG logos and artwork. The solicitation, issued under FAR Part 12, follows a lowest price technically acceptable approach where technical acceptability, responsibility, and administrative compliance serve as mandatory pass/fail gates before price evaluation. Quotes must be submitted electronically to Marc Kerrigan and Isao Hattori by August 14, 2026, at 5:00 p.m., and must include a fully completed SF 1449, pricing for each CLIN, a narrative confirming compliance with all specifications, acknowledgment of approval conditions, company details, Unique Entity ID from SAM.gov, and a certification of small business status. Artwork will be provided by MAARNG within seven days of award, and vendors must submit digital proofs within seven days of receiving artwork and production samples within fourteen days of proof approval. All deliveries must be shipped to Camp Curtis Guild at 25 Haverhill St, BLDG L003, Reading, MA 01867, with this address explicitly required on all shipping documentation, despite system-generated DoDAACs pointing to Hanscom AFB, which is strictly prohibited as a delivery location. Items must be delivered within 60 calendar days of award under FOB destination terms with transportation costs borne by the contractor. The contract incorporates numerous FAR and DFARS clauses regarding subcontracting, labor, trafficking, cybersecurity, procurement prohibitions, and payment processes including WAWF electronic invoicing, and requires adherence to strict inspection and acceptance standards under FAR 52.212-4(b). Late or non-conforming submissions will not be evaluated, and the award will be made solely to the qualified low-priced offeror whose quote fully satisfies all solicitation requirements.

W7NE Uspfo Activity Ma Arng

POSTED

DEADLINE

RFQ No. CAFC-CO-26-001 "Automatic electronic date/time roller"

Solicitation # CAFC-CO-26-001

The U.S. Court of Appeals for the Federal Circuit is soliciting quotes for a single automatic electronic date/time stamp machine, with a preference for the RapidPrint brand or an equivalent model, to be used at the intake counter. The device must feature a blue ink roller with an automatic electronic date/time function and include custom die plates configured with two lines of text above the roller reading “US Court of Appeals” and “Federal Circuit,” and a single line below in all capital letters, larger font, reading “RECEIVED.” Vendors must ensure their offered product meets all specified physical and functional requirements, and if standard models do not include the required custom die plates, they must clearly indicate whether custom engraving or plate configuration is available, along with any associated cost or lead time implications. The government reserves the right to consider alternative options that satisfy or exceed the stated specifications. The solicitation, identified as RFQ No. CAFC-CO-26-001, was posted on August 6, 2026, with responses due by August 30, 2026, at 9:00 PM Eastern Time. The procurement falls under NAICS code 339940 and is managed by the Federal Circuit Court of Appeals under the Judicial Branch, with performance located at its office in Washington, D.C., ZIP 20439. Primary contact for inquiries is Joseph Tembo, reachable via email or phone, with additional support available through the Procurement Department. The contract is open to all eligible vendors without specific set-aside restrictions, and submissions must align precisely with the technical and operational demands outlined to be considered for award.

Federal Circuit Court Of Appeals

POSTED

DEADLINE

Supply of Synthetic Rope (MIL-R-17343D Compliant)The contract specifies the supply of nine reels of 1,200-foot synthetic rope that must fully comply with the military specification MIL-R-17343D or its updated counterpart MIL-PRF-17343E, ensuring the product meets stringent performance and durability standards required for defense applications. Each reel must be properly packaged and clearly marked in accordance with military requirements to facilitate handling, storage, and deployment in operational environments. The work is being procured as a subcontract under NAICS code 339940, indicating it relates to miscellaneous finished textile product manufacturing, and is sourced through the Department of Defense’s Construction & Equipment MRO SVC I organization. Performance is required to be delivered to the designated location in Bremerton, Washington, with a zip code of 98314-6001. The solicitation was posted on August 5, 2026, and all proposals must be submitted no later than August 17, 2026, providing potential vendors a twelve-day window to respond.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Identification Marker ManufacturingThe contract requires the manufacture of 222 military specification identification markers adhering to stringent federal procurement regulations including DFARS, FAR, and DLA standards. Each marker must be properly packaged and labeled to comply with all applicable military and logistics requirements, ensuring traceability and operational readiness. The work is classified as a subcontract under NAICS code 339940 and is being procured by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance required at the facility located in New Cumberland, Pennsylvania, zip code 17070-5002. Responses to this solicitation are due by August 17, 2026, with the opportunity posted on August 5, 2026. The contract does not specify a set-aside classification and no point of contact details are provided. All submissions must meet the technical and regulatory bar established by the Department of Defense, and successful contractors will be expected to deliver fully compliant units in accordance with the designated place of performance and labeling protocols. Further details can be accessed through the official DIBBS portal using the solicitation reference number SPE8E526T3800.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Identification Marker (NSN: 7690-01-729-4720)The contract requires the manufacture or supply of 18 standardized identification markers identified by NSN 7690-01-729-4720, with strict adherence to federal specifications including MIL-STD-129 marking standards and MIL-STD-2073-1E packaging requirements. Each unit must meet a 24-month shelf-life requirement to ensure long-term usability and compliance with military logistics standards. The solicitation is classified as a subcontract under NAICS code 339940 and is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. Performance of the contract is designated for the location with zip code 17070-5002 in New Cumberland. The opportunity was posted on August 5, 2026, and responses must be submitted by August 17, 2026, with no set-aside provisions indicated. All materials must be fully compliant with the specified military standards to be eligible for acceptance under this agreement.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

MIL-STD-129 & MIL-STD-130N Marking and LabelingThe contract requires precise application of permanent markings and labels in full compliance with MIL-STD-129 for packaging and MIL-STD-130N for item-level identification, ensuring all units receive standardized identification including barcodes, lot traceability data, and proper hazardous material indicators. The work must be executed with strict adherence to Department of Defense standards to guarantee uniformity, durability, and legibility throughout the supply chain, supporting inventory management, logistics, and safety protocols. Performance is designated for Tracy, California, with a response deadline of August 13, 2026, and the solicitation falls under NAICS code 339940 for other manufacturing equipment. This is a subcontract opportunity issued by the ASC Commodities Division under the Department of Defense, focusing on the accurate and consistent labeling of military items to ensure regulatory compliance and operational readiness.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Identification Marker Manufacturing and SupplyThe contract involves the manufacture and supply of 32 military identification markers with National Stock Number 7690011725404, requiring strict adherence to shelf-life, marking, and hazardous materials standards to ensure safety and compliance with military specifications. The work is to be performed at Tracy, California, with the delivery location designated by the zip code 95304-5000. The solicitation, issued under NAICS code 339940 for other miscellaneous manufacturing, is classified as a subcontract and was posted on August 5, 2026, with responses due by August 17, 2026. The contracting activity is managed by DLA DIST SAN JOAQUIN under the Department of Defense, and all deliverables must meet defined operational and regulatory criteria to ensure suitability for military use.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Electoral Material – Wooden Ruler

Solicitation # ECBH-RFP-2026-4123-1

The Office of the Chief Electoral Officer, operating as Elections Canada, is seeking proposals for the supply of wooden rulers bearing the official Elections Canada logo, with a preferred delivery date no later than December 1, 2026. The contract will initially run until March 31, 2027, with the option for Elections Canada to extend the term by two additional years under the same conditions. This procurement is open to Canadian suppliers as well as those from applicable trading partners and non-trading partners, provided no international sanctions apply. Proposals must be submitted by the closing date of August 21, 2026, and can be delivered in person, by mail, or through Canada Post’s Connect service; email and fax submissions are not accepted. All proposals must be sealed and addressed to the Proposal Receiving Unit in Gatineau, Quebec, during designated business hours. Bidders may submit documentation in either English or French, and all inquiries must be directed in writing exclusively to the Contracting Authority at proposal@elections.ca before the specified deadline. No security clearance is required for this procurement, and the incumbent is currently not a contractor. The solicitation documents are available exclusively through the CanadaBuys portal, and any bidder may request a debriefing after the award is announced by contacting the Contracting Authority.

Office of the Chief Electoral Officer (Elections)

POSTED

DEADLINE

Sensory Toys SupplyThe contract pertains to the supply of new sensory stimulation toys that meet federal compliance standards for use in developmental and therapeutic care environments. These toys are intended to support sensory integration and cognitive development in clinical, educational, or rehabilitative settings. The solicitation is categorized as a subcontract under NAICS code 339940, which classifies the manufacturing of other sporting and athletic goods, indicating the products must be produced in accordance with relevant federal manufacturing and safety regulations. The Texas branch of the Health and Human Services Commission issued the opportunity, with responses due by August 19, 2026, at 4:30 PM. The contract is accessible through the Texas SmartBuy portal, and while specific delivery locations and points of contact are not provided, performance is expected to serve state-funded therapeutic programs requiring federally compliant equipment. All submitted proposals must demonstrate adherence to federal guidelines for safety, material composition, and developmental appropriateness of the toys.

Health and Human Services Commission

POSTED

DEADLINE

Paint Roller Kit Supply and AssemblyThe contract calls for the supply, packaging, and delivery of paint roller kits that must fully comply with federal logistics and defense standards, specifically MIL-STD-129 for labeling and packaging, as well as all applicable hazardous materials labeling requirements. These kits are intended for use by the Department of Defense and must be assembled and shipped to the designated place of performance in New Cumberland, Pennsylvania, with ZIP code 17070-5002. The work falls under NAICS code 339940, indicating it involves other miscellaneous manufacturing, and is issued as a subcontract under the DDSP New Cumberland Facility. All responses must be submitted by August 17, 2026, with the solicitation posted on August 4, 2026. Proper compliance with military packaging, labeling, and hazardous materials regulations is mandatory to ensure seamless integration into defense supply chains, and failure to meet these standards will result in rejection of the offer.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Paint Roller Kits (Commercial Off-the-Shelf Items)The contract requires the procurement, packaging, labeling, and delivery of four boxes containing paint roller kits, with each box holding ten complete kits. Each kit consists of a 7-inch cage roller, a handle, and a solvent-resistant tray, all classified as commercial off-the-shelf items. The work must be completed and delivered according to the specified requirements, ensuring proper assembly, labeling, and packaging before shipment. The performance location is in New Cumberland with the ZIP code 17070-5002, and the NAICS code 339940 indicates the manufacturing category for other miscellaneous fabricated metal products. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and is structured as a subcontract under the Department of Defense through the DDSP New Cumberland Facility. No set-aside type is assigned, and the contract is open to eligible subcontractors meeting the technical and delivery specifications. The procurement is managed through the DIBBS system, and all bids must be submitted prior to the deadline to be considered. The items are standard commercial products, but full compliance with packaging, labeling, and delivery timelines is mandatory to fulfill contractual obligations.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Artist’s Brush Manufacturing and SupplyThe contract mandates the full manufacturing and supply of 12,000 artist’s brushes to meet federal and military standards for packaging, labeling, and hazardous materials handling, ensuring compliance with all applicable regulations for defense procurement. The work must be performed under a small business set-aside designation, specifically reserved for total small businesses as defined under FAR 19.5, with the North American Industry Classification System code 339940 applying to the manufacturing scope. All deliverables are required to be shipped to Tinker Air Force Base, OK, with a zip code of 73145-8000, and the contract is structured as a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program. The solicitation was posted on August 4, 2026, with a firm response deadline of August 17, 2026, indicating a tight turnaround for interested small business contractors to submit proposals. The procurement environment is strictly competitive within the small business sector, and bidders must be prepared to demonstrate capacity to meet exacting military specifications for product integrity, safety compliance, and logistical readiness. The absence of a designated point of contact or office address suggests that all communications and submissions must be processed through the DIBBS portal using the provided RFQ link.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

More opportunities from Government of Jamaica → North East Regional Health Authority

Same awarding agency

Custom Commemorative Tokens SupplyThe contract entails the manufacture and delivery of custom-designed metal tokens to be used by staff and attendees of the Parish HOD Retreat, with responsibilities covering full production from design finalization through to packaging and timely delivery. The tokens are commemorative in nature and must be produced to meet specific aesthetic and functional requirements aligned with the retreat’s theme and purpose. The work is classified under NAICS code 339920, indicating it falls within the miscellaneous manufacturing sector, and is structured as a subcontract under the Government of Jamaica’s North East Regional Health Authority. Production efforts must adhere to quality standards ensuring durability and precision, with all items delivered in a manner that supports ceremonial distribution at the event. The contract was posted on August 5, 2026, and while the place of performance and point of contact details are not specified, the procurement is managed through the Government of Jamaica’s electronic procurement system. There is no set-aside designation applied, meaning the contract is open to any qualified subcontractor capable of fulfilling the technical and logistical demands of the project.

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE

SMHD26-RO-G041-To Supply Tokens For Staff/Attendee For Parish HOD Retreat To Be Held July 29, 2026

Solicitation # GOJEP-9945671

POSTED

DEADLINE

Supply of Plastic Storage ContainersThe contract entails the procurement and delivery of six durable plastic storage containers intended for use in hospital operations under the North East Regional Health Authority, which operates under the Government of Jamaica. The requirement is classified as a subcontract with a NAICS code of 326199, indicating it falls under other plastic product manufacturing. There are no specified details regarding labeling, customization, or technical standards for the containers, leaving the design and material specifications to the discretion of the supplier as long as the durability and functionality meet operational needs. The contract was posted on August 3, 2026, and while the place of performance and point of contact information are not provided, the solicitation is accessible through the Jamaica e-procurement portal. The absence of a set-aside designation or organizational type specification suggests the contract is open to any qualified vendor without preferential treatment.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

PMH26-G078 To Supply Six (6) White Boards and Six(6) Plastic Storage Containers To The Port Maria Hospital

Solicitation # GOJEP-9901226

Office Supplies and Stationery Retailers

POSTED

DEADLINE

Project Management and General Contracting OversightThe contract entails comprehensive project management and general contracting oversight for the renovation of a health center under the North East Regional Health Authority, part of the Government of Jamaica. The scope includes end-to-end coordination of all trade activities, scheduling of work phases, implementation of quality control measures, and direct communication with clients to ensure alignment with project goals and standards. The work falls under NAICS code 236220, indicating classification as a commercial and institutional building construction project, and is structured as a subcontract within the broader procurement framework of the Jamaican government. Performance of the work is expected to occur at the health center site, though specific location details are not provided, and all activities must adhere to the regulatory and operational requirements of the public health sector in Jamaica.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Painting and Wall FinishesThe contract titled Painting and Wall Finishes involves surface preparation, priming, and the application of low-VOC paint on walls and adjacent areas that have been impacted by construction activities. It is issued as a subcontract under the NAICS code 238390 and is managed by the North East Regional Health Authority under the Government of Jamaica. The work must meet environmental standards by using paints with low volatile organic compound content to ensure safety and compliance with health and sustainability guidelines. The contract was posted on August 3, 2026, and the performance location is not specified, but the work is tied to construction-affected areas within the jurisdiction of the authority. All activities are intended to restore and finish interior surfaces to an appropriate standard following construction disruption.

Other Building Finishing Contractors

POSTED

DEADLINE

Electrical Rough-In and Trim for Work StationsThe contract titled Electrical Rough-In and Trim for Work Stations involves the installation of electrical conduit, wiring, outlets, switches, and trim work specifically integrated into cubicles and work stations to support clinical operations within healthcare facilities. This subcontract falls under NAICS code 238210, which pertains to electrical contracting services, and is issued by the North East Regional Health Authority under the Government of Jamaica. The work requires precision to ensure all electrical components are properly concealed and functional within the structure of the work stations, meeting the operational demands of a clinical environment. The solicitation was posted on August 3, 2026, and while no set-aside or specific procurement type is indicated, the project is designated for subcontracting and must be executed at the project location governed by the health authority’s operational needs. The full scope is accessible via the provided government portal link for interested contractors.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

On-Site Installation of Cubicles and Work StationsThe contract involves the on-site assembly, alignment, anchoring, and finishing of prefabricated cubicle units and work stations within an occupied health center, ensuring minimal operational disruption during installation. Work must be performed with precision and care to integrate seamlessly into existing facility layouts while maintaining safety and hygiene standards in a sensitive healthcare environment. The scope requires skilled labor capable of handling delicate installations without compromising the functionality of surrounding medical services or patient areas. The project falls under NAICS code 238350 for other building finishing contractors and is structured as a subcontract under the Government of Jamaica through the North East Regional Health Authority. All work is to be carried out at the health center location, with timing and execution strategies designed around the constraints of an active healthcare facility. The solicitation was posted on August 3, 2026, and full details can be accessed through the official Jamaican e-procurement portal, though no specific set-aside provisions or point of contact information are provided in the available data.

Finish Carpentry Contractors

POSTED

DEADLINE

Custom Cubicle Fabrication and Millwork SupplyThe contract entails the fabrication and supply of prefabricated cubicle units and custom millwork components for installation at the Highgate Health Centre, with all materials required to meet healthcare-grade standards, specifically emphasizing moisture resistance to ensure durability and hygiene in clinical environments. The work is scoped under NAICS code 337110, classifying it within the furniture and related product manufacturing sector, and is structured as a subcontract under the North East Regional Health Authority, which operates under the Government of Jamaica. All components must be precisely manufactured to support functional and sanitary demands typical of healthcare facilities, with no flexibility in material specifications or installation requirements. The contract was posted on August 3, 2026, and is accessible through the Government of Jamaica’s eProcurement portal, though no solicitation number or point of contact is provided. There is no designated set-aside classification, and the place of performance is limited to the Highgate Health Centre without additional geographic specification. The project demands strict adherence to clinical environmental standards, and while the contract does not outline funding mechanisms or payment terms, execution is expected to comply with all applicable healthcare construction and material regulations enforced by the authority.

Wood Kitchen Cabinet and Countertop Manufacturing

POSTED

DEADLINE

SMHD26-RO-W008-To Fabricate and Install Cubicles/Work Stations at the Highgate Health Centre

Solicitation # GOJEP-9895796

Finish Carpentry Contractors

POSTED

DEADLINE

Functional Testing and Compliance VerificationThe contract pertains to comprehensive functional testing and compliance verification for medical equipment following repair, with a focus on ensuring hospital-grade sterilization capability. Key activities include post-repair performance testing such as cycle validation to confirm operational integrity under standard and extreme conditions, precise pressure and temperature calibration to meet stringent sterilization benchmarks, and rigorous safety checks to guarantee the reliability and safety of the equipment in clinical environments. These procedures are essential to uphold regulatory and institutional standards for infection control and patient safety within healthcare facilities. This subcontract is issued under the North East Regional Health Authority, part of the Government of Jamaica, and is classified under NAICS code 541380, indicating it involves scientific and technical consulting services related to health and medical systems. Although specific location and contact details are not provided, the work is expected to be performed in alignment with Jamaican healthcare infrastructure requirements. The contract was posted on August 3, 2026, and can be accessed via the official Jamaica Electronic Public Procurement System, requiring adherence to technical protocols and compliance documentation to validate the equipment’s readiness for clinical use.

Testing Laboratories and Services

POSTED

DEADLINE

Medical Equipment Repair and Installation ServicesThe contract pertains to the on-site installation, calibration, and functional testing of a repaired Steris autoclave, ensuring it meets all operational and safety standards required by the hospital facility. The work must be performed at the location where the equipment is deployed, with strict adherence to medical compliance protocols to guarantee patient safety and regulatory alignment. The service provider is responsible for verifying that the autoclave functions correctly after repair, including precise calibration and rigorous testing procedures to confirm reliability and efficiency under clinical conditions. This subcontract falls under the NAICS code 811310, which classifies it within medical equipment repair and maintenance services, and is issued by the North East Regional Health Authority under the Government of Jamaica. The solicitation was posted on August 3, 2026, and is accessible via the Jamaican Electronic Public Procurement System. While specific financial details or performance timelines are not provided, the scope emphasizes direct technical expertise in hospital-grade sterilization equipment and requires qualified personnel to execute the installation and validation process without disruption to ongoing healthcare operations.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE