This Government Contract opportunity from Iowa was posted on July 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Woven Steel Wire Mesh Panels

Closed

State & Local

Submission Closed07/22/2026, 05:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312

New

Federal

LIBERTY SUBSTATION ADOT EXTENSION STEEL POLE STRUCTURESThe Western Area Power Administration, under the Department of Energy, has issued a forecast for the procurement of steel pole structures to support the Liberty Substation ADOT Extension project. This procurement falls under NAICS code 332312, indicating it involves the fabrication of structural metal components, specifically steel poles intended for electrical transmission or distribution infrastructure. The project is designed to extend and enhance utility infrastructure in alignment with ADOT requirements, though specific location details for performance are not provided. The contract is currently in the forecasting stage, indicating it is not yet open for bidding but is planned for future release, with a posted date of August 10, 2026. Small business program managers at the agency are the primary points of contact for inquiries, with email addresses provided for further engagement, emphasizing the agency’s focus on small business participation in the upcoming solicitation process.

Western Area Power Administration

POSTED

DEADLINE

Bundle 35 B3411 External SheltersThe contract titled Bundle 35 B3411 External Shelters is a forecasted procurement issued by Naval Information Warfare Systems under the Navy Information Warfare Command Atlantic, with a NAICS code of 332312 indicating it pertains to the manufacturing of metal buildings and sheds. The solicitation is posted as a forecast with no specific solicitation number assigned, indicating it is an early-stage notice to provide industry with advance awareness of potential future procurement activity. The place of performance is designated as Charleston, and the sole point of contact for the acquisition is Tyler J. Roberts, who serves as both the primary and secondary contracting officer, reachable via the email address tyler.j.roberts53.civ@us.navy.mil. The contract opportunity is published on the Navy’s procurement portal, and while details such as set-aside status, funding, or delivery timelines are not specified, the notice aims to inform potential vendors of an anticipated requirement for external shelters, likely to support naval infrastructure or operational needs.

POSTED

DEADLINE

PALLET RACKING COMPThe contract titled "PALLET RACKING COMP" is a forecast opportunity posted on May 25, 2026, by the Department of Justice under the Inc Federal Prison Industries agency. This procurement is designated as a Small Business Total Set-aside, signaling that only small businesses are eligible to compete for the contract. The contract falls under the NAICS code 332312, which pertains to fabricated structural metal manufacturing. The work is expected to be performed in Green Bay, Wisconsin. Key contacts for this contract include Stacey Phipps, who serves as the primary point of contact, and Robert L. Connolly, the Small Business Point of Contact, providing assistance to small business vendors interested in bidding. Additional details and updates about this opportunity can be accessed through the Department of Justice's official contracting forecast website. The contract aims to support the department’s operational needs related to pallet racking systems through a competitive process limited to small business entities.

Inc Federal Prison Industries

POSTED

DEADLINE

Marine Structural Metal Door Fabrication and AssemblyThe contract entails the fabrication and assembly of a marine-grade structural metal door in accordance with military technical drawings, requiring precision steel construction, full hardware installation, and surface finishing that meets rigorous military compliance standards. The work must ensure durability and performance in harsh maritime environments, with all components and finishes adhering to specified military specifications for corrosion resistance, structural integrity, and operational reliability. The solicitation is issued as a subcontract under NAICS code 332312, with a response deadline of August 21, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contracting entity is the Fluid Handling Division within the Department of Defense, indicating this effort supports naval or maritime defense systems. There is no set-aside designation, and the opportunity is open to qualified subcontractors capable of delivering military-grade marine doors meeting exacting technical and quality requirements.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Self-Drilling Screw SupplyThe contract calls for the supply of five self-drilling screws, part number 90822A350 and national stock number 5305015613885, which must fully comply with applicable federal material specifications. The items are required to meet stringent military-grade standards and are intended for use within Department of Defense operations. The solicitation is issued under the NAICS code 332312, which classifies the procurement within the screw, bolt, and fastener manufacturing sector, indicating the technical precision and regulatory adherence expected from the supplier. Issued by the ASC Commodities Division under the Department of Defense, the contract is structured as a subcontract with a response deadline of August 18, 2026, and was posted on August 10, 2026. The place of performance is designated as FPO with ZIP code 96667-2610, suggesting delivery to a military postal address, likely supporting overseas or mobile operations. The contract is accessible via the DIBBS platform, and while no specific set-aside or point of contact is identified, adherence to federal compliance and timely delivery are critical for successful award and fulfillment.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

DOOR, METAL, MARINE STRU

Solicitation # SPE7M4-26-T-328U

The contract specifies the procurement of a single marine structural metal door, designated by NSN 2040-00-912-6167, with detailed technical specifications including a hinge assembly, right-hand low-type steel construction, interior design without fixed light or hasp assembly, and specific grab handles labeled PC 37B inside and PC 36B outside. The door requires a label plate (Piece 32B) and gasket (Piece 31A), with surface finish compliant with Note 47 of drawing 80064 DWG.2226372. Drawing number 167-7379216 has been formally added to the authorized item description per MACHALT 538. The item is subject to stringent export control regulations under ITAR or EAR, restricting technical data disclosure to foreign persons regardless of location, and DFARS 252.225-7048 governs compliance. Only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire, and have received formal approval are permitted access to the controlled data. The solicitation is issued under contract number SPE7M4-26-T-328U by the Department of Defense's Fluid Handling Division, with a response deadline of August 21, 2026, and a required delivery within 164 days after award. The place of performance is New Cumberland, Pennsylvania, 17070-5002. The North American Industry Classification System code 332312 indicates the product falls under metal door and window manufacturing. The contract emphasizes cybersecurity compliance, as the vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization (C3PAO), ensuring the firm meets rigorous cybersecurity standards for handling government data. All technical and procedural requirements are tied to strict regulatory frameworks, and the point of contact for inquiries is Rory O’Reilly, reachable via email and phone as listed in the contract data.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Reinforcing Steel Supply

POSTED

DEADLINE

Supply of SUEX Aluminum Transport Boxes (L&R)

Naval Surface Warfare Center

POSTED

DEADLINE

Structural Steel Fabrication and Installation

W2SD Endist New England

POSTED

DEADLINE

Crash Cushion Supply and Installation (TL-3)

California Department of Transportation

POSTED

DEADLINE

Supply of Manufactured Security Door and Frame Assemblies

Royal Canadian Mounted Police

POSTED

DEADLINE

Blind Rivet Manufacturing and SupplyThe contract seeks the manufacture and supply of 19,727 blind rivets identified by NSN 5320010978081, with strict adherence to military specifications, packaging standards, and technical requirements established by the Defense Logistics Agency. All units must meet exacting quality and performance criteria to ensure compatibility and reliability in defense applications. The work is to be performed under a subcontract arrangement, with the place of performance specified as Hill Air Force Base in Utah, where delivered items will be received and issued. Compliance with the NAICS code 332312 confirms the scope is limited to the fabrication of fasteners and similar metal products. The contract opportunity was posted on August 9, 2026, with a firm response deadline of August 17, 2026, and is administered by the ASC Commodities Division under the Department of Defense, which oversees procurement logistics for military components.

ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The contract calls for the manufacture and delivery of 124 precision steel wire mesh panels, each measuring 5 feet by 10 feet, featuring a 2-inch by 2-inch grid pattern and a wire diameter of 0.250 inches. The panels must be constructed using the Lockcrimp W-71 weaving pattern and delivered in bare steel without any protective coating. This is a subcontract under NAICS code 332312, which pertains to the fabrication of wire products, and is solicited by the Iowa agency with a response deadline of July 22, 2026. The work is to be performed without a designated set-aside classification, and all panels must meet exacting dimensional and structural specifications to ensure uniformity and performance. Bidders must submit proposals through the provided online portal by the stated deadline to be considered for award.

General Info

124 bare steel wire mesh panels, 5x10 ft, 2x2 in grid, 0.250 in wire, Lockcrimp W-71, deliver by July 22, 2026

Agency

IowaView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 13

subcontract

Response DeadlineJul 22

Deadline has passed

Submission Closed

07/22/2026, 05:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyIowa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Iowa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and delivery of 124 precision 5' x 10' steel wire mesh panels with 2" x 2" grid and .250" wire diameter, Lockcrimp W-71 pattern, in bare steel without coating.