Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Support, Bearing, Air

Awarded
SPRTA1-26-R-0249Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract concerns the acquisition of Support, Bearing, Air identified by NSN 2840-00-348-5990NZ and part number 4034246, issued by the Department of Defense through DLA Aviation at Tinker Air Force Base, Oklahoma. The solicitation, numbered SPRTA1-26-R-0249, was posted on June 18, 2026, with a closing date of June 30, 2026, and requires vendors to submit pricing and delivery information for a target quantity of 76 units, with a minimum of 19 and a maximum of 114 units, all to be delivered on or before May 31, 2029, to CLIN 0001-SW3211. The item is designated as a Critical Safety Item, mandating strict adherence to quality and inspection protocols. The contract is governed by the terms and conditions of SPE4A1-21-G-0001, with additional compliance required under DFARS [phone hidden] for Item Unique Identification, necessitating the use of an attached IUID Checklist. Quality assurance standards require conformance to ISO 9001:2000, and the Buy American Act and balance of payments program apply, restricting sourcing to domestic suppliers. Packaging must follow attached Packaging Requirements documents, and transportation must adhere to applicable Transportation documents. Inspection and acceptance occur at origin, with a receiving report required. The contracting office is located at Tinker AFB, OK 73145-3070, with Jayson Skalla as the primary point of contact for inquiries. No contract value is disclosed, and evaluation factors for award are not specified, though proposals must include pricing, production lead time, and capacity information.

General Info

DLA Aviation solicits air bearing support components for aircraft manufacturing, deadline June 5, 2026.

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

OK

Set-Aside

NONE

Documents

2

Letter Solicitation SPRTA1-26-R-0249 for Support, Bearing, Air

PDF, High priority: read this first1 page · rfq
High

SPRTA1-26-R-0249 Justification for Other Than Full and Open Competition

PDF, Low priorityjustification-and-authorization
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

2 updates
PhaseAwarded
Posted

Presolicitation

Type Changed

Presolicitation → Solicitation

Notice updated

Response deadline changed from Jun 5, 2026 to Jun 30, 2026. The notice description changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City
Contacts2 people available
OfficeTINKER AFB, OK, 73145-3070, USA
Office AddressTINKER AFB, OK, 73145-3070, USA

Full Description

Show more

PR:    FD2030-26-00173
RFP/RFQ:    SPRTA1-26-R-0249
EST. RFP ISSUE DATE:    1-May-2026
EST. RFP CLOSE DATE:    31-May-2026
AMC:    3C
ITEM DESCRIPTION:    Support, Bearing, Air
NSN:    2840-00-348-5990NZ
P/N:    4034246
BEQ QUANTITY:    76 EA (Min:  19 EA; Max:  114 EA)
DESTINATION(S):    SW3211
REQUESTED DELIVERY:    76 EA On or Before 31 May 2029
CRITICAL SAFETY ITEM:    Yes
FIRST ARTICLES REQUIRED:    No
QUALIFICATION REQUIREMENTS:    Yes
EXPORT CONTROLLED:    No
SURPLUS AUTHORIZED:    No
SMALL BUSINESS SET-ASIDE:    No
APPROVED SOURCE(S):    RTX Corporation
    
    
    
    
PURCHASE HISTORY:    
CONTRACT NUMBER:    SPRTA1-21-F-0237
DATE:    8-Sep-21
QTY:    10 EA
UNIT PRICE:    $4,298.50
AWARDEE:    RTX Corporation
CAGE:    52661


In accordance with FAR 5.207(c)(16)(ii), all responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency.


This acquisition involves technology that has a military or space application. The extent of foreign participation has not yet been determined. Nothing in this notice contradicts other restrictions, identified in the synopsis notice or solicitation regarding eligible sources (e.g. if this is a small business set aside foreign sources may not participate as prime contractors but could, if otherwise eligible, participate as subcontractors).


Based upon market research, the Government is not using the policies contained in FAR Part 12 (acquisitions of commercial items) in its solicitation for the described supplies. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government’s requirement with a commercial item within 15 days of this notice.


The Government’s obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the contracting officer for this contract and until the contractor receives notice of such availability, to be confirmed in writing by the contracting officer.


Authority: 10 U.S.C. 2304(c)(1). Justification: supplies required are available from only one or a limited number of responsible sources and no other supplies will satisfy agency requirements.  The proposed contract action is for supplies for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302.


It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed.  Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. 


This notice of intent is not a request for competition. However, all proposals received within 45 days (30 days if the award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. 


While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price, technical and past performance factors as detailed in the solicitation.


An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the ombudsman at +1 (555) 000-0000, facsimile +1 (555) 000-0000. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.


Electronic procedures will be used for this solicitation. Hardcopies of the solicitation will not be sent from this office. The solicitation will be available for download at www.fbo.gov. Questions concerning this synopsis or subsequent solicitation can be directed to the buyer, contact@example.gov.  
 

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
SHROUD ASSEMBLY, ENGINE
Solicitation # SPE4A7-27-R-X125
Solicitation SPE4A7-27-R-X125 is a fixed-price procurement issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the supply of Engine Shroud Assemblies (NSN 1560-007683121). Designated as a critical application item, the procurement is intended to provide worldwide support over a five-year term or until an aggregate total of 350,000 dollars is reached. The initial base year includes a guaranteed minimum quantity of 14 units, with a maximum delivery order of 28 units. This is not a small business set-aside, and awardees must be registered in the System for Award Management (SAM). Technical requirements mandate strict adherence to MIL-STD-130 for marking and identification, MA-122 for sheet metal fabrication, and ASME B46.1 for surface texture. The contractor must provide first article units for approval testing within 30 days of award, with the government adding the cost of this testing to the evaluated price. Due to the nature of the item, a Northrop Grumman Licensing Agreement applies, requiring strict data non-disclosure and destruction protocols. Additionally, contractors must meet Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements and provide unique identifiers issued by SPRS. Inspection and acceptance are generally conducted at the source, though first article testing is accepted at the destination. Invoicing and payment are processed electronically through the Wide Area WorkFlow (WAWF) system. Evaluation for award is based on technical acceptability, price relative to estimated annual demand, and the cost of government first article testing. Offers for surplus material are explicitly excluded from consideration.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

17 minutes ago

DEADLINE

in 6 days
View Details
NAICS: 336412
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-27-T-7328
Solicitation SPE4A6-27-T-7328 is a fixed-price contract issued by the Defense Logistics Agency (DLA) for the procurement of 313 units of close tolerance screws, identified by NSN 5305-01-3977495 and part number C20645-3-12. The requirement is designated as a critical application item and must adhere to technical and quality standards set forth in the DLA Master List, including specific configuration change management and physical identification requirements. Delivery is required within 23 days after receipt of order, with a need ship date of October 5, 2025, and an original required delivery date of December 15, 2026. The items are to be delivered FOB Origin to the DLA Distribution Depot at Hill AFB, Utah. Quality assurance is stringent, requiring destination inspection and acceptance per FAR 52.246-2, with sampling methods following MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001. The contract incorporates several critical regulatory clauses, including the Buy American and Balance of Payments Program, DFARS cybersecurity reporting requirements for covered defense information, and various hazardous material labeling standards. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. This solicitation is open for quotes via the DIBBS portal until November 5, 2026, and includes a price evaluation preference for HUBZone concerns.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

17 minutes ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

NAICS: 336412
New
Federal
ROTOR, FAN_End_Item_F110_NSN_2840015807062PR_PN_9547M28G15
Solicitation # FD20302700073
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify potential suppliers for the new manufacture of a Rotor, Fan with NSN 2840-01-580-7062PR and Part Number 9547M28G15, intended for use on the F110 engine platform. This effort is a Sources Sought Synopsis under FAR Part 10 and is not a solicitation or guarantee of contract award; no funds are currently available, and the government does not intend to award a contract based on responses. The requirement seeks vendors capable of end-to-end production including component procurement, inspection, testing, packaging, shipping, and management of supply chain challenges such as diminishing manufacturing sources and long-lead material sourcing. Nonrecurring engineering costs associated with qualification as an approved source may also be required. The North American Industry Classification System code is 336412, with a size standard of 1,500 employees, and the government is actively encouraging participation from all types of businesses, including small businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses. Responses must be submitted through the designated Interested Vendors button on the SAM.gov portal by the deadline of July 28, 2026, at 4:59 AM Central Standard Time. All communication regarding this market research must be directed to the workflow email address [email hidden]. The place of performance is Tinker Air Force Base, Oklahoma, and the government may consider splitting the requirement by airframe to enhance competition. This effort is purely for information gathering to inform future acquisition strategy decisions.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS