Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SUPPORT, CANOPY, ROCKE

Active
SPEFA3-26-T-0297Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDGView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

P.O.BOX 357058, SAN DIEGO, CA, 92135-7058, US

Set-Aside

NONE

Documents

(1)

SPEFA3-26-T-0297.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG
View Agency Profile
Office AddressUS
Contacts
JAMES GREEN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SUPPORT, CANOPY, ROCKET MOTOR AFT
CANOPY,MOVABLE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 76301 P/N 74A350861-2001
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017191803 0001 EA 1.000
SPEFA3-26-T-0297
SECTION B
PR: 7017191803 PRLI: 0001 CONT’D
NSN/MATERIAL:1560LN0031058
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N65888
FLEET READINESS CENTER SOUTHWEST
P.O.BOX 357058
SAN DIEGO CA 92135-7058
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N65888
DLA RECEIVING OFFICER
NAVAL BASE CORONADO
BLDG 660 BAY 3 ROGERS RD
SAN DIEGO CA 92135-5017
US
M/F: (TCN) N658886166A118
RDD: 166
PROJ: 705 TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0D DIST: 9B ADV: 24 FC: GC
Need Ship Date:00/00/0000 Original Required Delivery Date:06/18/2026
SPEFA3-26-T-0297 NSN/Part Number: 1560-LN-003-1058 Quantity: 1 EA Purchase Request: 7017191803QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
LEVER, BREECHBLOCK, COCK
Solicitation # SPE7L4-26-T-5985
The contract involves the procurement of 17 units of a lever, breechblock, cocking component designated by NSN 1005-13-116-2146 under solicitation SPE7L4-26-T-5985, with a delivery deadline of 145 days after contract award. This item is classified as a defense article subject to the International Traffic in Arms Regulations and the Arms Export Control Act, requiring all manufacturers and exporters to be registered with the Directorate of Defense Trade Controls; failure to provide proof of registration renders any offer ineligible. The technical data associated with this component is export-controlled under either ITAR or EAR, with strict limitations on dissemination to foreign persons or entities, even within the United States. Only contractors with approved U.S./Canada Joint Certification Program status, completion of mandatory DOD export control training, and explicit DLA authorization may access the technical data. Additionally, the item falls under demilitarization requirements for Category I munitions, and the use of Class I ozone-depleting chemicals is strictly prohibited. Packaging must comply with DLA procurement standards, and government identification must be removed from any non-accepted supplies. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, and performance is designated for Cherry Point, North Carolina, under the oversight of the Department of Defense’s Combat Vehicles and Armament division.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-12PD
This contract pertains to the procurement of PIN-RIVET items identified by NSN 5320-01-623-5442 and part number HLT50YB-12-18 or ST3M759C6-18, with a total quantity of 23 units at a unit price of $23.00, resulting in a total contract value of $529.00. The items must be manufactured or sourced from approved vendors including SPS Technologies LLC, Huck International Inc, West Coast Aerospace Inc, Hi-Shear Corporation, Heartland Precision Fasteners Inc, Fastener Innovation Technology Inc, and The Boeing Company, all of which are listed with their respective DOD vendor identifiers. Manufacturing may require casting or forging processes, and if the contractor lacks the necessary tooling or technical expertise, they must submit a Casting and Forging Assistance Request to the Defense Logistics Agency. Compliance with MIL-STD-130N for identification marking of U.S. military property is mandatory, and all items must be physically marked in accordance with RQ017 requirements. Inspection and acceptance occur at the origin, with sampling governed by MIL-STD-1916 or equivalent zero-based sampling plans, and all attributes must be verified using strict AQL standards: critical at 0.1, major at 1.0, minor at 4.0. Packaging must adhere to ASTM D3951 as supplemented by DLA’s Master List of Technical and Quality Requirements and MIL-STD-129 for labeling, with palletization following RP001 guidelines. Delivery is FOB origin, with a required delivery date of March 13, 2027, and a need ship date of January 31, 2027, under a 171-day performance window. The contract mandates zero variance in quantity and requires all documentation and labeling to reflect the DLA unit of issue and purchase unit as defined in official DLA resources. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
DUCT, EXHAUST, AIRCRA
Solicitation # SPE4A5-26-T-323S
This contract issued by the Defense Logistics Agency for a duct, exhaust, aircraft component with NSN 2840-01-499-0448 and part number 5116T08P02 specifies the procurement of exactly eight units under procurement request 7017739863, with delivery due in 171 days FOB origin and no variance allowed in quantity. The item must comply with stringent military standards including MIL-STD-130 for Item Unique Identification, MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging, with specific preservation methods, container types, and palletization following DLA’s procurement requirements. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the item is subject to DFARS 252.211-7003 for covered defense information. Inspection and acceptance occur at origin using zero-defect sampling based on MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs as defined. The delivered item must be shipped to DLA Distribution Jacksonville at the specified address with a required ship date of January 31, 2027, and original delivery deadline of April 16, 2028. The contract is governed by the DLA Master List of Technical and Quality Requirements applicable as of the solicitation issue date, and documentation for source approval is required.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SLEEVE, EXPANSION MA
Solicitation # SPE8E5-26-T-3767
The contract is for the procurement of 1,023 units of a SLEEVE, EXPANSION MA, identified by NSN 3460014986519 and part number FTS-4-0-3-8, under solicitation SPE8E5-26-T-3767, issued by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required at the destination address in New Cumberland, Pennsylvania, with a 153-day delivery timeframe from the date of order, and the contract specifies FOB Destination terms. All items must comply with stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging and labeling must strictly follow MIL-STD-129 for marking and 2D barcoding, with palletization governed by RP001 DLA Packaging Requirements for Procurement. The Unit of Issue is each (EA), with zero variance allowed in quantity, and inspection and acceptance occur at the destination point by the Government. The contract mandates compliance with multiple Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses covering cybersecurity (252.204-7012), hazardous materials labeling, employment eligibility, trafficking in persons, sustainable products, whistleblower protections, and restrictions on covered defense telecommunications equipment. Offerors must possess a valid Unique Entity Identifier and CAGE code, and are required to submit accurate representations of their size and socioeconomic status, including any joint venture affiliations. Invoicing must be submitted through Wide Area WorkFlow, and all hazardous materials must be documented with a complete list and corresponding Safety Data Sheets prior to award, with ongoing updates required if compositions change. The contract includes mandatory adherence to federal regulations on material safety, export control, and government information safeguarding, and prohibits the use of unauthorized contractors for telecommunications equipment. The original required delivery date is March 6, 2027, with a need ship date of January 18, 2027. Pricing for the 1,023 units is not explicitly stated in the CLIN, but award data indicates related line items sum to a total estimated value of $10,730.31, though this figure is derived from partial award records and may not represent the full contract value.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
CAP, FILTER
Solicitation # SPEFA3-26-T-0336
This contract pertains to the procurement of a CAP, FILTER with the NSN 1650-LL-FFX-F347 and Parker Hannifin Corporation part number 3831355-101, quantity of 10 units, to be delivered FOB destination within 84 days of contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with revision control based on the solicitation or award date depending on acquisition type. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, using zero acceptance criteria unless otherwise specified, with attributes classified as critical, major, or minor assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application with no shelf life requirement. Packaging must conform to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA Packaging Requirements. Unit of issue is each, with no variance allowed in quantity. Inspection and acceptance occur at the destination. The delivery address is the DLA Distribution Jacksonville facility, with parcel post addressed to the Fleet Readiness Center Southeast. The contract is issued under solicitation SPEFA3-26-T-0336 with a required delivery date of August 4, 2026, and a response deadline of August 12, 2026.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11ZV
The contract pertains to the procurement of 3 retaining rings with NSN 5325-01-517-3749 and part number M10HS155 from HEIL TRAILER INTERNATIONAL LLC, under solicitation SPE4A6-26-T-11ZV. Delivery is required FOB origin with zero variance in quantity, and inspection and acceptance occur at the destination. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including mandatory marking and labeling per MIL-STD-129 and palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. The required delivery date is January 18, 2027, with an allowed delivery order of 171 days, and the ship date must occur no later than January 31, 2027. The delivery location is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation must comply with DLAD Proc Note C19 and C20. The unit of issue is each, priced at $3.00 per unit, with total contract value of $9.00. All technical and quality provisions referenced via R or I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SET SCREW
Solicitation # SPEFA5-26-T-0974
This contract pertains to a single set screw with NSN 5305-LN-003-5502, procured by the Defense Logistics Agency under solicitation SPEFA5-26-T-0974, with a required delivery within five days of contract award. The item is designated as a critical application item for Hydro-Aire Aerospace Corp, part number 83691, and must comply strictly with MIL-STD-130N for identification marking of U.S. military property, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based sampling plan. Unless otherwise specified, all attributes not explicitly categorized are treated as major, and acceptance criteria demand zero non-conformances in the sampled lot. Packaging must adhere to ASTM D3951 but is subordinate to all DLA Master List of Technical and Quality Requirements, and labeling must conform to MIL-STD-129 with unit pack details as specified. Palletization follows DLA packaging guidelines, and the item has no shelf life restriction. The delivery is FOB destination, with inspection and acceptance occurring at the destination, and zero variance in quantity is permitted. The item must be shipped by the fastest traceable means, with parcel post strictly prohibited; freight must be sent to the specified address at Cherry Point, NC, using the provided freight and contact details. The required delivery date is August 6, 2026, and the contract includes mandatory government-only use identifiers for tracking and processing. The unit of issue is each (EA), with a total quantity of one and a unit price of $1.00, and the procurement is subject to all applicable technical, quality, and packaging standards listed in the DLA Master List, which override any conflicting commercial standards.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
3851718-101 PIN ( LLFF
Solicitation # SPEFA3-26-T-0335
The contract pertains to the procurement of two units of part number 3851718-101, a critical application item manufactured by Parker Hannifin Corporation with CAGE code 0000092003, identified by NSN 5315LLFFXF362, under solicitation SPEFA3-26-T-0335 issued by the Defense Logistics Agency. The total contract value is $8.00, with each item priced at $2.00, delivered in two separate CLINs of two units each, with a required delivery date of August 6, 2026, and a five-day lead time from order placement. Delivery is FOB destination to the Fleet Readiness Center Southeast in Jacksonville, Florida, with inspection and acceptance also occurring at the destination. Item Unique Identification is not required under DFARS 252.211-7003(c)(1)(i), but bare item marking per RQ017 and packaging labeling must conform to MIL-STD-129, including application of the CAGE code and barcoding per standardized military logistics requirements. Packaging must adhere to ASTM D3951, unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence, and palletization must follow RP001. Parcel post is strictly prohibited, and shipments must be sent via the fastest traceable means. Sampling methodology must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; if drawings or specifications define critical, major, or minor attributes, they must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are considered major, and if MIL-STD-105 or ASQ Z1.4 is used for sample sizing, acceptance requires zero non-conformances. The supplier must comply with all applicable DLA technical and quality requirements referenced via RA001. Contractual clauses mandate compliance with cybersecurity standards including NIST SP 800-171, safeguarding of controlled unclassified information, prohibition of covered telecommunications equipment, hazardous material handling, trafficking-in-persons prevention, employment eligibility verification, sustainable products, and accelerated payments to small business subcontractors. Payment must be submitted electronically via Wide Area WorkFlow
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
CUSHION
Solicitation # SPEFA5-26-T-0975
The contract specifies the procurement of 25 units of a cushion identified by NSN 5330-LN-002-7833 and part number SPD65E-1701-055, with a total contract value of $25.00 per unit delivered FOB destination within 48 days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and must follow DLA Packaging Requirements for Procurement (RP001) and be palletized accordingly, while the material itself has no shelf life restriction. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated; critical attributes must be verified at Level VII or AQL 0.1, major at Level IV or AQL 1.0, and minor at Level II or AQL 4.0. Inspection and acceptance occur at the destination, with no允许 variance in quantity. Delivery must be sent to the specified freight address at Cherry Point, North Carolina, with a required delivery date of August 4, 2026, and must be prepared for shipment in accordance with the defined unit of issue and packaging protocols.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
VALVE, AIRCRAFT, MATE
Solicitation # SPE4A5-26-T-324D
The item is a valve for aircraft mating applications, identified by NSN 1680-01-524-1537, with a quantity of 11 units required under solicitation SPE4A5-26-T-324D, which is a total small business set-aside under NAICS code 488190. The contract requires strict compliance with limited rights data that must govern manufacturing and testing, and only vendors with direct access to this data or verifiable traceability to approved sources may submit quotes. A Source Approval Request (SAR) package is mandatory for companies seeking source approval, and all technical data associated with this item is classified as covered defense information subject to export control under either ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, including foreign nationals within the U.S. and subsidiaries of U.S. companies. Access to the controlled data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required DLA training on handling export-controlled technical data, and have received formal authorization from the DLA. Delivery is due 171 days after contract award, with performance centered in San Diego, California, and inquiries must be directed to Steven Lewis at the designated DLA email.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
CAP
Solicitation # SPEFA5-26-T-0956
This contract, issued under solicitation number SPEFA5-26-T-0956 by the Defense Logistics Agency Fleet Readiness Center, is a simplified acquisition for a single unit of a military component identified by NSN 1560LLNC08714 and part number 205-030-724-047 from Bell Textron Inc. Delivery is required within 50 days, with an original delivery date of October 29, 2026, and is FOB destination with zero tolerance for quantity variance. The Government will inspect and accept the item at the destination address in Cherry Point, North Carolina, using the freight shipping address provided. All packaging must comply with ASTM D3951, but the DLA Master List of Technical and Quality Requirements takes precedence, and palletization must adhere to RP001: DLA Packaging Requirements for Procurement. Marking and labeling must follow MIL-STD-129 for shipment and storage, and unique identification of the item must comply with MIL-STD-130N(1) as mandated for U.S. military property. The material has no shelf life requirement. Quality assurance sampling must follow MIL-STD-1916 or ASQ Z1331, Table 1, or an equivalent zero-based sampling plan, with attributes classified as critical, major, or minor assigned AQLs of 0.1, 1.0, and 4.0 respectively, and corresponding verification levels of VII, IV, and II; unspecified attributes are treated as major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size, but acceptance requires zero non-conformances unless otherwise specified. The contract is anticipated to be awarded as a firm-fixed-price contract under an automated process, likely using a Lowest Price Technically Acceptable methodology. Multiple FAR and DFARS clauses are incorporated, including inspection requirements under 52.246-2, cybersecurity safeguards under 252.204-7012, prohibitions on covered telecommunications equipment under 252.204-7018, trafficking in persons compliance under 52.222-50, and hazardous material handling restrictions under 252.223-7006. Payment must be submitted via WAWF, and compliance with employment eligibility verification, equal opportunity, and
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 488190
New
DIBBS
SKIN
Solicitation # SPEFA3-26-T-0334
This contract pertains to the procurement of two units of a specific component identified by NSN 1560-LN-003-4843 and part number 70203-21101-144, supplied by SIKORSKY AIRCRAFT CORPORATION and JGS PROPERTIES LLC. The item is not subject to shelf life requirements or unique identification marking, as per DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over all other standards. Packaging must comply with ASTM D3951, with mandatory adherence to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 packaging directives. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined. The delivery is FOB destination, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The required delivery date is January 31, 2027, with a lead time of 171 days. The unit of issue is each (EA), at a price of $2.00 per unit, totaling $4.00. Deliveries must be sent to the designated freight address in Jacksonville, Florida, and the contract is under solicitation number SPEFA3-26-T-0334, issued by the DLA Fleet Readiness Center Southeast.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details