This Solicitation opportunity from Department Of Defense was posted on May 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SUPPORT, STRUCTURAL

Closed

SPE4A5-26-T-114BFederal

Submission Closed05/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

SHIELD, HEAT, AIRCRAFThe contract pertains to the procurement of heat shields specifically designed for aircraft, identified by the National Stock Number 2840-01-319-4889. The purchase request indicates a quantity of 10 units to be acquired under solicitation number SPE4A5-26-T-209F. The solicitation was posted on June 3, 2026, with responses due by June 11, 2026. This solicitation is managed by the Defense Logistics Agency within the Department of Defense, representing a federal government procurement effort. While no specific location details for the place of performance or office address are provided, the contract is a standard solicitation without set-aside restrictions or designated NAICS code. The procurement aims to fulfill the military's need for quality heat shielding components tailored for aircraft, ensuring operational safety and performance. Additional details and submission information are accessible through the provided government contracting platform link.

Defense Logistics Agency

POSTED

DEADLINE

GLAND, TAIL ROTOR HYThe contract involves the procurement of ten units of a component identified as the GLAND, TAIL ROTOR HY, with the National Stock Number 1650-01-179-7294. This solicitation, numbered SPE4A5-26-T-199D, was issued by the Defense Logistics Agency under the Department of Defense. The contract posting date was June 1, 2026, and the response deadline for submissions was June 9, 2026. The procurement is categorized under a federal organization type and does not specify any set-aside requirements or North American Industry Classification System code. The contract's specifics, including delivery location and point of contact details, are not delineated within the available data. The contract aims to facilitate the acquisition of parts necessary for tail rotor hydraulic systems, supporting military or defense-related aviation maintenance or operations. The solicitation is publicly accessible through the Defense Logistics Agency’s online portal, indicating transparency and standard federal procurement procedures.

Defense Logistics Agency

POSTED

DEADLINE

FUSELAGE SECTIONThe contract involves the procurement of ten fuselage sections, identified by the NSN/Part Number 1560-00-066-3022, under Purchase Request 7012147535. The solicitation, issued by the Defense Logistics Agency within the Department of Defense, is designated as SPE4A4-26-T-0153 and was posted on June 15, 2026. Interested parties were required to submit their responses by the deadline of June 23, 2026. This procurement is categorized as a federal solicitation without a specified set-aside type or NAICS code. The contract does not specify detailed location information for performance or office addresses. It aims to meet defense logistics needs for critical aircraft components, reflecting the department's ongoing requirements for maintaining and supporting military aviation assets.

Defense Logistics Agency

POSTED

DEADLINE

RIB, STIFFENER, AIRCRThe contract involves the procurement of six units of "RIB, STIFFENER, AIRCR," identified by the National Stock Number (NSN) 1560-01-648-1373. The solicitation number is SPE4A7-26-T-501W, issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 15, 2026, with a response deadline of June 23, 2026. This is a federal solicitation without any specified set-aside or NAICS code details. The place of performance and office address are not detailed in the contract data. The contract pertains to the acquisition of components likely used in aircraft structural applications, as indicated by the item title. Interested parties could access the solicitation and related documents through the Defense Logistics Agency's official procurement website.

Defense Logistics Agency

POSTED

DEADLINE

BULKHEAD, AIRCRAFTThis contract involves the procurement of a single aircraft bulkhead, identified by NSN/Part Number 1560-01-663-8957, under the purchase request number 7017092553. The solicitation for this item is designated SPE4A6-26-T-92H5 and was posted on June 15, 2026. Interested parties were required to submit their responses by June 23, 2026. The contract is managed by the Defense Logistics Agency, a component of the Department of Defense, reflecting its federal government affiliation. The contract type is a solicitation, indicating that the government invited offers to supply the specified aircraft bulkhead. There is no set-aside designation or NAICS code provided, suggesting open competition or unspecified industrial classification. The place of performance and office address details are not listed, but the contract is marked for performance within the United States. The solicitation and related documents are accessible through the Defense Logistics Agency's online platform for vendor engagement.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The contract pertains to the procurement of structural support components for aircraft, specifically involving four units of part number 1560-01-619-0191. The solicitation number SPE4A5-26-T-114B is issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION, with delivery scheduled for no later than March 11, 2027, at the Defense Distribution Depot in New Cumberland, Pennsylvania. Packaging and handling requirements emphasize adherence to DLA packaging standards, applicable federal specifications, and MIL-STD-129 marking protocols, ensuring proper identification and secure shipment. Hazardous materials must be packaged according to FED-STD-313 when applicable, while non-hazardous materials follow commercial packaging standards aligned with ASTM D3951. The contract integrates specific technical and quality requirements as outlined in the DLA Master List, including cybersecurity compliance at CMMC Level 2 Self-Assessment and provisions for the removal of government identification from non-accepted supplies. Sampling and inspection are governed by Sikorsky Corporation’s alternate sampling plan, ensuring quality control meets or exceeds industry standards. Acceptance and inspection will take place at the destination, with zero tolerance for quantity variance. The contract stipulates the use of the DoD authorized unit of issue, and transportation details direct shipments to the designated government facility. Communication and coordination will be managed through the designated point of contact, with the solicitation open for responses until May 13, 2026.

General Info

Procurement of four structural aircraft parts, delivery by March 2027, adhering to packaging and cybersecurity standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing View NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-114B.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 5

Solicitation

Response DeadlineMay 13

Deadline has passed

Submission Closed

05/13/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUS

Contacts

Carmen Gills

contact@example.gov

+1 (555) 000-0000

Full Description

SUPPORT,STRUCTURAL
SUPPORT,STRUCTURAL COMPONENT,AIRCRAFT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
SIKORSKY CORPORATION, CAGE 78286 ALTERNATE SAMPLING PLAN QAP 1201
PROCEDURE, "ATTRIBUTE SINGLE STATISTICAL ACCEPTANCE SAMPLING" IS
ACCEPTABLE. SIKORSKY CORPORATION'S ALTERNATE PLAN MUST MEET OR EXCEED
THE REQUIREMENTS OF ASQ H1331 OR MIL-STD-1916.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SIKORSKY AIRCRAFT CORPORATION 78286 P/N 96204-02551-121
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016646246 0001 EA 4.000
NSN/MATERIAL:1560016190191
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
SPE4A5-26-T-114B
SECTION B
PR: 7016646246 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/01/2026 Original Required Delivery Date:03/11/2027
SPE4A5-26-T-114B NSN/Part Number: 1560-01-619-0191 Quantity: 4 EA Purchase Request: 7016646246QTY: 4 Delivery: 171 days ADO