Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Surface Treatment & Coating (Phosphate Coating)

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the application of a phosphate coating to bolt assemblies in strict adherence to the military specification MIL-DTL-16232H, with the primary objectives of enhancing corrosion resistance and improving adhesion for subsequent coatings or finishes. Process control measures must be rigorously implemented to ensure consistent quality, and full traceability of each coated assembly is mandatory to meet defense-grade standards for accountability and performance verification. The work is classified as a small business set-aside under the SBA, exclusively available to businesses certified as small under the NAICS code 332813, which corresponds to other fabricated metal product manufacturing. The solicitation was posted on July 28, 2026, and responses are due by August 7, 2026, with the procurement managed by the Department of Defense’s Land Supply Chain through a subcontracting arrangement. All work is to be performed in accordance with federal acquisition regulations, though specific performance location details are not provided.

General Info

Phosphate coat bolt assemblies to MIL-DTL-16232H, small business set-aside, due August 7, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and ColoringView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply phosphate coating to bolt assemblies per MIL-DTL-16232H for corrosion resistance and adhesion, with process control and traceability.

Similar Contracts

Same NAICS industry code

Hot-Dip Galvanizing of Metal ComponentsThe contract requires the hot-dip galvanizing of structural metal components to achieve a minimum zinc coating thickness of 120 microns, fully compliant with UNI EN ISO 1461 standards to ensure robust corrosion resistance in harsh marine environments. The work must be performed to meet the durability and protective requirements necessary for exposure to saltwater and coastal weather conditions, ensuring long-term structural integrity and reduced maintenance needs. All materials and processes must be rigorously controlled to maintain coating uniformity, adhesion, and surface quality as specified by the international standard. The contract, titled Hot-Dip Galvanizing of Metal Components, is classified as a subcontract under NAICS code 332813 and is solicited by the Naval Supply Systems Command Fleet Logistics Center Sigonella Naples Office under the Department of Defense. The response deadline is August 17, 2026, and all work must be performed in Gaeta. The solicitation was posted on July 29, 2026, and is accessible through the SAM.gov portal. No set-aside provisions are indicated, and the place of performance is fixed, requiring contractors to plan logistics and execution accordingly to meet the stringent technical and temporal requirements.

Navsup Flc Sigonella Naples Office

POSTED

about 17 hours ago

DEADLINE

Precision Metallic Tube Manufacturing & DeliveryThe contract calls for the manufacture and delivery of twelve precision metallic tubes designated as critical application items, requiring strict adherence to military technical data packages TDP Rev A Gen 1 and specific engineering drawings such as NR 53711 6690372. These components must meet exacting dimensional, material, and performance standards to ensure operational reliability in defense systems, with all work needing to conform to established military specifications without deviation. The subcontract is issued under NAICS code 332813, indicating classification within the forging and stamping industry, and places performance at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, leaving a limited window for qualification, proposal submission, and compliance verification. The contract is managed by the Fluid Handling Division of the Department of Defense and is accessible via a designated DIBBS platform link for vendor participation. While no set aside designation or point of contact information is provided, the nature of the items and the involvement of a DoD component signal that only qualified suppliers with verified capabilities in precision metal fabrication and defense supply chain experience are expected to respond. Failure to meet the technical requirements or delivery timelines will likely result in disqualification or contract termination.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Machining and Metal FabricationThe contract calls for precision CNC machining of valve bodies, spools, and internal components from specified high-performance alloys, with full lifecycle support including finishing, deburring, and rigorous dimensional inspection to meet strict aerospace and defense specifications. All work must adhere to exacting quality standards, ensuring tight tolerances and surface finishes suitable for critical fluid control systems within military applications. The scope emphasizes reliability and repeatability, requiring validated processes and documented quality controls throughout production. This is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by the NAICS code 332813, which covers machine shops and precision manufacturing services. The solicitation is issued by the Defense Logistics Agency under the Department of Defense, with performance required at the FPO location bearing zip code 09587. The opportunity was posted on July 28, 2026, and responses are due by August 10, 2026, providing interested small business contractors with a limited window to submit proposals for this high-priority subcontract opportunity.

Defense Logistics Agency

POSTED

DEADLINE

Surface Preparation and Coating ApplicationThis contract requires the cleaning, pretreatment, and application of an e-coat primer followed by a military-compliant topcoat to mounting brackets, ensuring full adherence to defense sector surface finishing standards. The work must be performed in compliance with military specifications for durability, corrosion resistance, and finish quality, with all processes tailored to meet the strict technical and environmental requirements of defense-grade coatings. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses certified by the Small Business Administration are eligible to bid, promoting small business participation in defense-related procurement. The solicitation, issued by the Strategic Acq Program Directorate within the Department of Defense, was posted on July 28, 2026, with responses due by August 12, 2026. It falls under NAICS code 332813, which categorizes metal coating, engraving, and related activities. The place of performance and specific location details are not specified, indicating flexibility in where the work may be carried out, as long as all contract requirements are met. Bidders must ensure capability to deliver finished brackets meeting military compliance standards within the given timeline, and all work must align with the technical and regulatory expectations of the Department of Defense procurement system.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Manufacturing of Plain Chrome Copper Shoe AssemblyThe contract calls for the manufacture of a military-spec chrome copper shoe assembly compliant with NSN 3110012249738, requiring precision machining, surface plating, and rigorous quality control processes to meet strict defense standards. The work must be performed to ensure full functional and dimensional conformity under operational military conditions, with all phases of production subject to inspection and certification protocols. The solicitation is issued as a subcontract under the NAICS code 332813 for other fabricated metal product manufacturing, with the place of performance located in Bremerton, Washington, 98314-6001. The opportunity was posted on July 28, 2026, and responses are due by August 5, 2026, with the ordering activity being the ASC Commodities Division under the Department of Defense. All work must align with the technical and procedural expectations defined by the military specification for this part.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Blue Anodizing and Surface FinishingThe contract calls for the surface treatment of aluminum spacer sleeves with a blue anodized finish, adhering to implied military or aerospace standards such as MIL-A-8625 to guarantee robustness, corrosion resistance, and uniform coloration. The work must meet precise quality benchmarks expected in defense and aviation applications, ensuring the finish withstands environmental stressors while maintaining aesthetic and functional integrity. All processing must comply with industry-recognized specifications governing anodizing thickness, dye consistency, and sealing integrity. The solicitation is structured as a subcontract under NAICS code 332813 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Proposals are due by August 5, 2026, with the contract performance location situated in Tracy, California, zip code 95304-5000. The posting date is July 28, 2026, indicating a lead time of approximately one week for vendor responses. The work requires precise execution to satisfy stringent military-grade requirements, and participation is open to qualified subcontractors capable of delivering certified anodized components meeting the specified durability and color standards.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Special Processes and Coatings for Aircraft ComponentsThe contract involves executing specialized manufacturing processes such as heat treatment, welding, non-destructive testing, and surface finishing including anodizing and plating on structural panel components for aerospace applications. These processes are critical to ensuring the structural integrity, durability, and compliance of aircraft parts with stringent military and aviation standards. Work under this subcontract must be performed at Tinker Air Force Base, Oklahoma, with a response deadline of August 5, 2026, and is classified under NAICS code 332813 for metal coating, engraving, and allied services. The contracting activity is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, indicating this is part of a broader defense supply chain effort to support aircraft maintenance and production. The solicitation is open to qualified subcontractors capable of meeting exacting quality control and process validation requirements for defense-critical components.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Metal Fabrication and Heat Treatment ServicesThe contract seeks qualified subcontractors to provide heat treatment, forging, and non-destructive testing services for metal components, ensuring compliance with stringent military specifications for performance and durability. All work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with delivery schedules and quality controls aligned to Department of Defense standards. The North American Industry Classification System code 332813 confirms the focus on forgings and stampings, requiring specialized equipment and certified personnel experienced in military-grade metal fabrication processes. Bidders must submit proposals by August 10, 2026, with no set-aside provisions identified, indicating open competition among eligible subcontractors. The solicitation is managed by the Maritime Supply Chain under the Department of Defense, emphasizing the critical nature of these components in defense systems. Technical compliance, traceability of materials, and adherence to non-destructive testing protocols are essential for award consideration, and all work must meet exacting quality assurance requirements without deviation.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CLEANING SOLVENT, GE

Solicitation # SPE8E5-26-T-3705

This contract is for the procurement of CLEANING SOLVENT, GE, under solicitation SPE8E5-26-T-3705, issued by the Defense Logistics Agency on behalf of the Department of Defense. The item, identified by NSN 7930-01-367-1000, requires a quantity of 10 boxes with delivery expected within 20 days after award. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. The contract is subject to strict export control regulations due to the presence of technical data governed by either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—is prohibited without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and only contractors with approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA questionnaire, are permitted access to the technical data. Additionally, the vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization, and the contract includes provisions for handling Covered Defense Information. The place of performance is Kings Bay, GA, with Devin Duffy as the primary point of contact.

Defense Logistics Agency

POSTED

DEADLINE

CLEANING SOLVENT, GE

Solicitation # SPE8E5-26-T-3717

The contract is for the procurement of Cleaning Solvent, GE, identified by NSN 7930-01-367-0995, under solicitation SPE8E5-26-T-3717, issued by the Defense Logistics Agency. Two separate line items are specified: one for 1 box delivered to Fort Benning, GA, and another for 2 boxes delivered to Cherry Point, NC, both with a required delivery window of five days. The solvent is classified as a Type I (Code H) item with a non-extendable 12-month shelf life and must meet the technical standards of SAE AMS3167 Revision NR B dated October 1, 2005. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is regulated as a hazardous material, subject to IP025 shipping protocols, and parcel post is strictly prohibited; shipments must use traceable freight methods. All deliveries are FOB destination, with inspection and acceptance occurring at the final delivery point and no quantity variance permitted. The contract references DLA’s Master List of Technical and Quality Requirements for mandatory specifications and uses the DoD unit of issue system. Delivery dates are set for January 16 and January 21, 2026, respectively, with contact and shipping details explicitly provided for each destination.

Defense Logistics Agency

POSTED

DEADLINE

Painting and Coating Application (Industrial)This contract is a subcontract for industrial painting and coating application services tied to a paint booth at Nellis Air Force Base, Nevada, with a ZIP code of 89191. The work includes essential support functions such as booth calibration, safety inspections, and assistance with coating application procedures. It is designated as a total small business set-aside under SBA regulations, meaning only small businesses are eligible to bid, in accordance with FAR 19.5. The North American Industry Classification System code for this procurement is 332813, which corresponds to metal coating, engraving, and allied services. The opportunity was posted on July 28, 2026, and responses are due by August 21, 2026, at 5:00 PM. The contracting agency is listed as FA4861 99 Cons Lgc under the Department of Defense, though no specific point of contact or office address details are provided.

FA4861 99 Cons Lgc

POSTED

DEADLINE

Protective Coating and Corrosion Resistance ApplicationThe contract involves the application of weather-resistant and anti-corrosion coatings, including powder coating and galvanizing, to protect materials exposed to outdoor conditions, ensuring long-term durability and structural integrity. The work is intended for use at facilities associated with DFW International Airport in Texas, with all coatings meeting required standards for environmental resilience and corrosion prevention under harsh outdoor exposure. This subcontract opportunity is open for responses until July 30, 2026, and is classified under NAICS code 332813, which pertains to metal coating, engraving, and allied services. The solicitation was posted on July 27, 2026, and is exclusively accessible through the DFW Airport BonfireHub portal, with no formal set-aside designation specified. Contractors must prepare and submit proposals addressing technical specifications for coating application and compliance with performance standards expected in high-traffic, outdoor aviation infrastructure environments.

Dfw International Airport

POSTED

DEADLINE

in about 14 hours

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Cybersecurity Compliance and CUI SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 Revision 2 controls to safeguard Controlled Unclassified Information within the contractor’s systems and environments. This includes establishing technical, administrative, and physical safeguards to ensure the confidentiality, integrity, and availability of CUI in alignment with federal cybersecurity standards. The contractor must also comply with incident reporting requirements mandated by DFARS 252.204-7012, ensuring timely notification and remediation of any cybersecurity events affecting CUI. All activities must be performed under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and the work is classified under NAICS code 541512 for Computer Systems Design Services. The contract is structured as a subcontract and is associated with the Department of Defense’s Land Supply Chain organization. Responses must be submitted by the deadline of August 28, 2026, with the expectation that performance will occur within the defense supply chain environment.

Computer Systems Design Services

POSTED

about 12 hours ago

DEADLINE

Quality Inspection and Testing ServicesThe contract requires independent inspection and testing of heater assemblies and components to ensure full compliance with specified technical drawings, MIL-STD-1916 standards, and a zero non-conformance mandate. All work must be performed with rigorous attention to quality control, ensuring that every part meets exacting military specifications without deviation. The services are critical to maintaining the integrity and reliability of defense-related heating systems. This is a total small business set-aside subcontract under NAICS code 541380, exclusively available to small business concerns as defined by the SBA. The solicitation was posted on July 29, 2026, with a response deadline of August 28, 2026. The contracting activity stems from the Department of Defense through the Land Supply Chain office, and performance is expected to support U.S. military operations. All proposals must demonstrate proven capability to deliver defect-free inspection and testing outcomes in alignment with stringent defense quality requirements.

Testing Laboratories and Services

POSTED

about 12 hours ago

DEADLINE

Packaging, Preservation, and Corrosion ControlThe contract requires comprehensive military-compliant packaging, corrosion prevention, and moisture control measures for a heater parts kit, ensuring all components are protected during storage and transit under demanding operational conditions. All packaging must meet strict defense standards with proper labeling and full documentation to guarantee traceability, readiness, and compliance with military logistics protocols. The scope encompasses every step from initial preservation techniques to final packaging and recordkeeping, with an emphasis on long-term durability and environmental resilience. This is a total small business set-aside subcontract under NAICS code 561910, issued by the Department of Defense’s Land Supply Chain, and is open for response until August 28, 2026. The solicitation is exclusively available to small businesses as defined by the Small Business Administration, and the place of performance and exact delivery location are not specified in the provided details. All work must align with federal acquisition regulations and military-grade specifications, with no flexibility in adherence to preservation and packaging standards.

Packaging and Labeling Services

POSTED

about 12 hours ago

DEADLINE

Component Supply for Heater AssemblyThe contract seeks the supply of critical components including heating elements, thermostats, housings, and electrical connectors specifically designed to meet military specifications and stringent quality standards for integration into heater assemblies. All materials must adhere to defined technical requirements and undergo rigorous testing to ensure reliability under demanding operational conditions. The procurement is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 335999 designating it under Other Electrical Equipment and Component Manufacturing. The solicitation was posted on July 29, 2026, and responses are due by August 28, 2026, with performance expected to support the Department of Defense’s Land Supply Chain through undisclosed but mission-critical locations. Compliance with federal acquisition regulations and defense-specific quality protocols is mandatory, and all suppliers must be certified to handle sensitive military-grade components under controlled manufacturing practices.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

Manufacture of Vehicular Compartment Heater Parts KitThe contract requires full manufacturing, assembly, testing, and packaging of the vehicular compartment heater parts kit designated by NSN 2540-01-096-5023, strictly in accordance with military specifications and source control drawings. All work must be performed to meet rigorous defense standards, ensuring the component’s reliability and performance under operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing the Department of Defense’s commitment to supporting small business participation in defense supply chains. The project falls under NAICS code 333414, which classifies it within the heating equipment manufacturing sector, and is managed by the Land Supply Chain division of the Department of Defense. The opportunity was posted on July 29, 2026, with a response deadline of August 28, 2026, providing potential bidders a four-week window to prepare and submit proposals. The place of performance and point of contact details are not specified, but the primary location of work is expected to align with the contractor’s facility capable of meeting military-grade production requirements. All submissions must be made through the official DIBBS platform, and compliance with all technical, quality, and regulatory standards is mandatory for award consideration.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 12 hours ago

DEADLINE

Small Business Subcontracting Participation (Socioeconomic Support)Small businesses are invited to participate in subcontracting opportunities to support a prime contractor’s socioeconomic evaluation score under a Department of Defense solicitation tied to NAICS code 333999. This subcontracting initiative is designed to enhance the prime contractor’s standing in federal socioeconomic assessments by integrating qualified small businesses into the supply chain, though no specific set-aside designation is applied. The opportunity was posted on July 29, 2026, with responses required by August 27, 2026, and is managed by the Land Supply Chain organization under the Office of the Secretary of Defense. While no place of performance or point of contact details are specified, interested small businesses must engage directly through the provided DIBBS portal to pursue participation and align with the prime contractor’s subcontracting goals. The effort does not involve a formal contract award but rather enables small firms to contribute to a larger bid’s compliance and competitiveness through verified subcontracting commitments.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

Logistics and Domestic Freight Shipping (FOB Origin)The contract pertains to the arrangement and execution of domestic freight shipping services from various points of origin within the United States to DLA Distribution New Cumberland, Pennsylvania, under FOB origin terms, meaning the responsibility for the shipment transfers to the buyer upon delivery to the carrier at the origin. This is a subcontract solicitation under the NAICS code 484220, which categorizes it within the truck transportation sector, specifically for general freight and local hauling. The opportunity is posted by the Department of Defense through its Land Supply Chain office, indicating that the work supports military logistics and supply chain operations. The response deadline is set for August 27, 2026, and the solicitation is available via a public portal for interested parties to review and submit proposals. There is no specific set-aside designation listed, suggesting the contract is open to all qualified contractors, regardless of business size or certification status. Performance is required solely within the U.S., with the final destination fixed at New Cumberland, PA, and no additional point of contact details are provided in the posting.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 12 hours ago

DEADLINE

Packaging, Preservation, and Marking ServicesThe contract requires the provision of packaging, preservation, and marking services for cylinder assemblies in full compliance with DLA RP001, MIL-STD-2073-1E, and MIL-STD-129 standards, ensuring all components meet rigorous military specification for handling, storage, and transportation. All work must adhere strictly to these technical guidelines to guarantee the integrity and traceability of the assemblies throughout the supply chain, with particular attention to labeling, protective materials, environmental preservation, and unit identification. This is a subcontract opportunity issued by the Department of Defense under the LAND SUPPLY CHAIN organization, with a solicitation posted on July 29, 2026, and a mandatory response deadline of August 27, 2026. The North American Industry Classification System code 493190 indicates the focus on warehousing and storage services, though the specific scope centers on specialized military packaging activities. The place of performance and point of contact details are unspecified, but the contract is accessible via the DIBBS platform for interested parties to review full requirements and submit proposals.

Other Warehousing and Storage

POSTED

about 12 hours ago

DEADLINE

Supply of Cylinder Assembly, Actuating, Linear (NSN 3040-01-642-5340)The contract seeks the procurement and delivery of 154 new, unused Cylinder Assembly, Actuating, Linear units identified by NSN 3040-01-642-5340, with the potential to expand to a maximum of 308 units if required. All units must fully comply with military specifications and meet stringent packaging standards to ensure readiness for deployment. The solicitation is issued under the NAICS code 333999 and is structured as a subcontract within the Department of Defense’s Land Supply Chain. Responses are due by August 27, 2026, with the opportunity formally posted on July 29, 2026. The place of performance and specific delivery location are not detailed in the available data, and no set-aside provisions or small business preferences are indicated. The contract is administered by the Department of Defense through its DLA DIBBS portal, with no direct point of contact listed for inquiries.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

CAP, FILLER OPENING

Solicitation # SPE7L1-26-T-889U

The contract pertains to the procurement of a CAP, FILLER OPENING with NSN 5340-01-371-2617 and part number 695155-1, under solicitation SPE7L1-26-T-889U, with a total quantity of 13 units to be delivered in 161 days from the award date, with delivery terms FOB origin and inspection and acceptance points at the destination. The item is classified as a commercial item, and unit identification is not required per DFARS 252.211-7003(c)(1)(i). Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified as VII, IV, and II for critical, major, and minor respectively, with unspecified attributes treated as major. The supplier must meet all applicable DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede other standards like ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and with RP001 for DLA packaging, requiring commercial packaging under ASTM D3951 unless the item is hazardous under FED-STD-313, in which case IP025 applies. Palletization must follow DLA guidelines, and the delivery address is DLA Distribution Warner Robbins, Robins AFB, GA. The contract is a total small business set-aside under NAICS code 332722, with a response deadline of August 10, 2026, and the required ship date is January 19, 2027. Documentation for source approval must be submitted per RC001, and all technical, quality, and packaging requirements are binding and take precedence over any conflicting commercial standards.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L1-26-Q-1375

This contract outlines the procurement of 470 units of a battery assembly identified by NSN 6140-01-737-7804 and part number LE1912MHIS, supplied by three qualified manufacturers: MAGNUM ELECTRONICS, INC, TAKAT LLC, and LOGIC ENERGY TECHNOLOGIES, INC. The item is classified as a Commercial Off the Shelf product with adequate catalog data available for evaluation, and it is subject to a strict 60-month Type I shelf life that is non-extendable. Compliance with DLA packaging, marking, and shipping standards is mandatory, including MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling, and RP001 for DLA-specific packaging requirements. The contract incorporates technical and quality requirements referenced from the DLA Master List, and inspection follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated. Critical, major, and minor attributes must be verified at specified levels or AQLs, and unspecified attributes are treated as major. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with additional containment requirements for portable mercury-containing devices. The delivery is FOB destination, with a firm delivery deadline of 250 days from award, and inspection and acceptance occur at the destination point. The item is to be palletized and shipped to the designated receiving warehouse in Tracy, California, in accordance with DLA procedures and hazardous material handling protocols under IP025. The contract explicitly prohibits quantity variance—zero tolerance for over or under shipment. All packaging and marking must reflect the Type I shelf-life code and comply with hazardous communication standards, including FED-STD-313E for SDS. The procurement is a total small business set-aside under NAICS code 335910, and the solicitation issued on July 29, 2026, with a response deadline of August 7, 2026. The end-use customer requires delivery by December 7, 2026, and the point of contact for inquiries is Sophia Finotti of the Department of Defense’s Land Supply Chain.

Battery Manufacturing

POSTED

about 12 hours ago

DEADLINE

PACKING WITH RETAIN

Solicitation # SPE7L1-26-T-890D

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE