Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Surveying and Site Layout

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Surveying and Site Layout is a small business set-aside subcontract under the NAICS code 541370, reserved exclusively for small businesses as defined by the SBA. It requires comprehensive topographic surveying, precise boundary determination, and detailed construction layout services to support site development activities. The work is procured by the Defense Logistics Agency under the Department of Defense, with the requirement to be performed at an undesignated location within the United States. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, with no designated point of contact provided in the solicitation details. All submissions must comply with the terms of the Total Small Business Set-Aside as outlined in FAR 19.5, ensuring participation is limited to qualifying small business concerns.

General Info

Small business set-aside for topographic surveying and construction layout at undisclosed U.S. location under DLA.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541370 - Surveying and Mapping (except Geophysical) ServicesView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Topographic surveying, boundary determination, and construction layout for project site development.

Similar Contracts

Same NAICS industry code

Survey and Mapping Services IDIQThe Port of Seattle is seeking qualified firms or teams to provide Survey and Mapping Services through an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract, with the solicitation posted on July 31, 2026. All survey work must adhere to strict geographic and vertical datum standards: at Airport facilities, surveys must use the Seattle-Tacoma International Airport Grid System or NAD83, while Seaport facilities require NAD83 or Seattle Tidelands as directed. Vertical control is governed by NGVD 29, STIA Vertical Datum, MLLW, or NAVD88, with any deviations requiring written approval from the Port Manager of Survey and Mapping. All land surveying activities must comply with现行 Washington Administrative Code and Revised Code of Washington regulations. Services will be performed under the direct supervision of the Port Manager of Survey and Mapping Services or their designated representative, encompassing both field and office-based support. The primary point of contact for inquiries is Hala Rabbo, with Ann Davidson listed as the Project Manager, and the contract is classified under NAICS code 541370 for Surveying and Mapping Services.

Construction Management

POSTED

about 4 hours ago

DEADLINE

TBIPS - Geomatics Analyst for Mapping & Charting Establishment

Solicitation # W1786-26-X002

The Department of National Defence is seeking to award a single contract for the services of one Geomatics Analyst Level 2 under the Task-Based Informatics Professional Services (TBIPS) Supply Arrangement, exclusively to qualified Tier 1 holders operating in the National Capital Region. The role involves providing geomatics engineering, IT infrastructure support, and development of data applications and workflows to enable production and operational capabilities for the Mapping and Charting Establishment and broader Department of National Defence and Canadian Armed Forces. The contract is expected to commence on 31 August 2028 and span an estimated 480 days of effort. Only nineteen pre-qualified TBIPS holders have been invited to submit proposals, including major firms such as CGI, Deloitte, ESRI Canada, Stantec, and others. The position requires access to Controlled Goods and a Minimum Resource Security Clearance of Secret, with the contractor organization needing to undergo Designated Organization Screening. Although bidders are not required to hold security clearances at the time of submission, the selected individual must be eligible and obtain the required clearance prior to performance. The contract falls under multiple international trade agreements, ensuring open competition among eligible Canadian suppliers. Proposals must be submitted by 19:00 EDT on 17 August 2026, with all inquiries directed to the Contracting Authority, Valery Plourde. All documentation may be submitted in either official language, and bidders may request a debriefing within 15 working days of receiving award notification.

Department of National Defence

POSTED

DEADLINE

Concrete Moisture and Adhesion TestingThe contract requires performing concrete moisture testing in accordance with ASTM F2170 or F1869 standards and installing an approved adhesion test patch prior to surfacing, ensuring the substrate meets necessary performance criteria for subsequent flooring or coating applications. The work is scoped under a subcontract for the County of Maui in Hawaii, with a response deadline of September 1, 2026, and is classified under NAICS code 541370 for architectural and engineering services. The testing must be conducted accurately to assess moisture levels and verify surface readiness, with the adhesion patch serving as a critical validation step to confirm proper bonding potential before any surfacing materials are applied. All work must comply with the specified standards and be completed in alignment with the project’s technical requirements to ensure long-term durability and safety of the finished surface.

POSTED

DEADLINE

in about 1 month

GIS and CMMS Data Integration ServicesThe contract seeks qualified providers to deliver GIS and CMMS data integration services aligned with San Diego County’s existing asset management systems, ensuring seamless compatibility and interoperability between geographic information systems and the computerized maintenance management platform. The work requires engineering deliverables that meet strict technical standards to support accurate asset tracking, data synchronization, and operational efficiency across county infrastructure programs. The solicitation is open as a subcontract opportunity under NAICS code 541370, with responses due by August 31, 2026, and performance expected to take place within San Diego. Participation is limited to entities capable of demonstrating expertise in integrating complex geospatial and maintenance data systems, with a focus on long-term data integrity, system scalability, and compliance with county-specific protocols. While no set-aside criteria are specified, all proposers must show proven experience in similar public-sector asset management integrations to be considered.

San Diego County

POSTED

DEADLINE

in about 1 month

Surveying and Site Layout ServicesThe contract titled Surveying and Site Layout Services is a subcontract issued by the County of Santa Barbara in California, focused on providing precise topographic and boundary surveys, construction staking, and comprehensive site layout services to support accurate land development. The work is essential for ensuring that all infrastructure and building components are positioned correctly according to design plans and regulatory requirements, with delivery of services tied directly to the needs of ongoing or upcoming development projects within the county. The North American Industry Classification System code 541370 indicates the scope falls under surveying and mapping services, emphasizing technical expertise in geospatial documentation and spatial precision. The solicitation was posted on July 30, 2026, and responses must be submitted by August 13, 2026, at 9:00 PM Pacific Time. There is no set-aside designation specified, meaning the contract is open to all eligible subcontractors without restriction based on business size or type. The place of performance is within Santa Barbara County, though specific locations are not detailed in the posting. Interested parties should review the official posting on the public procurement portal for full technical specifications, deliverables, and submission requirements, as the contract expects high standards of accuracy and compliance with local and state surveying regulations.

County of Santa Barbara

POSTED

DEADLINE

Quality Control Testing and Inspection ServicesThe contract seeks third-party testing and inspection services to verify material compliance, fire ratings, structural performance, and field quality assurance for projects under the State of Iowa. The services are intended to ensure that all materials and constructions meet required safety and performance standards through comprehensive evaluations conducted by qualified external laboratories or inspectors. The work will involve a range of assessments from laboratory analysis to on-site verification, targeting critical performance criteria essential for public infrastructure and building integrity. This is a subcontract opportunity posted on July 30, 2026, with a response deadline of August 20, 2026. It is classified under NAICS code 541370, which covers engineering services, and is managed by the Iowa agency under the DASIowa procurement system. There is no set-aside designation specified, and the place of performance and office address details are not provided, indicating the work may occur across multiple locations within the state. Interested parties must submit proposals through the provided online portal before the deadline to be considered for award.

POSTED

DEADLINE

Construction Administration & OversightThe contract entails the provision of on-site project management, inspection, and reporting services throughout the construction phase to ensure full compliance with approved design specifications, established budget parameters, and Section 3 requirements aimed at promoting economic opportunity for low-income individuals and businesses. The role requires continuous presence at the construction site to monitor progress, verify adherence to plans, identify deviations, and submit regular documentation that supports accountability and regulatory alignment. All activities must be conducted in accordance with the standards and expectations set forth by the City of Griffin, Georgia, and are governed under the NAICS code 541370, which classifies the services as architectural, engineering, and related technical consulting. Subcontractors seeking to bid on this opportunity must respond by the deadline of September 4, 2026, and are expected to demonstrate proven experience in construction oversight, familiarity with Section 3 compliance protocols, and the ability to coordinate effectively with contractors, engineers, and city officials. The solicitation is issued under the City of Griffin’s procurement system, with performance expected to occur at an unspecified location within Georgia, and bidders must be prepared to meet all administrative, technical, and reporting obligations without reliance on external documentation or references beyond the scope of the issued requirements.

City of Griffin

POSTED

DEADLINE

in about 1 month

Surveying and Site Assessment ServicesThe contract titled Surveying and Site Assessment Services requires the execution of topographic, boundary, and construction surveys to support environmental and development planning efforts in Ione, California, with a zip code of 95640. The work involves precise geospatial mapping that must be seamlessly integrated with CEQA documentation to ensure compliance with state environmental regulations. This subcontract is issued by the California Department of General Services, Real Estate Services Division, Project Management and Development Branch, and is focused on enabling informed decision-making for land use and infrastructure projects. Respondents must submit proposals by August 26, 2026, and the North American Industry Classification System code for this service is 541370, indicating it falls under surveying and mapping services. The place of performance is specifically tied to the Ione location, and all deliverables must align with the project’s planning, environmental review, and construction readiness objectives.

Department of General Services, Real Estate Services Division, Project Management and Development Branch (DGS, RESD, PMDB)

POSTED

DEADLINE

Surveying and Site Layout ServicesThe contract is for surveying and site layout services to support excavation, alignment, and utility coordination activities in Yountville, California, with a ZIP code of 94599. It is classified as a subcontract under NAICS code 541370, which pertains to surveying and mapping services. The work is required to ensure accurate topographic and as-built data collection essential for precise construction planning and coordination with existing utilities. The solicitation was posted on July 30, 2026, and responses are due by August 11, 2026. The contracting authority is the California Department of General Services, Real Estate Services Division, Project Management and Development Branch, with all performance work localized to the specified site in Yountville. Although no point of contact is provided, the proposal must be submitted through the designated online platform accessible via the provided link.

Department of General Services, Real Estate Services Division, Project Management and Development Branch

POSTED

DEADLINE

Inspection and Acceptance at Origin SupportThe contract supports government inspection at origin by coordinating critical quality assurance activities including documentation, sample preparation, and Product Verification Testing to ensure full compliance with AS9003 and Defense Logistics Agency standards. The work requires close collaboration with suppliers and inspection authorities to verify that products meet technical and regulatory requirements prior to shipment, with emphasis on precision, traceability, and adherence to defense-specific quality protocols. All activities must align with the rigorous expectations of the Department of Defense and are performance-based to guarantee consistent product acceptance. Performed at the place of performance in Tracy, California, this subcontract falls under NAICS code 541370 and is open for bidding with a response deadline of August 10, 2026. The solicitation is issued by the Land Supply Chain under the Department of Defense, and while no specific set-aside status is designated, participation is contingent on the ability to fully implement the inspection and verification protocols outlined. The contract does not include a designated point of contact, and all inquiries must be directed through the official DIBBS platform using the provided solicitation link.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Surveying and Site LayoutThe contract involves comprehensive topographic surveying, boundary marking, and site layout services to support construction alignment and grading operations at Tinker Air Force Base, with a zip code of 73145-8000. The work is classified under NAICS code 541370, indicating specialized surveying services, and is structured as a subcontract under the Department of Defense. The solicitation was posted on July 30, 2026, with responses due by August 14, 2026, providing a two-week window for qualified contractors to submit proposals. The performance location is fixed at Tinker AFB, requiring precise geospatial data collection and monumentation to ensure accurate positioning for infrastructure development. While no specific point of contact or set-aside details are provided, the contract is open to eligible subcontractors seeking to support defense-related site preparation activities.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Quality Assurance and Sampling Compliance (MIL-STD-1916)The contract pertains to the implementation of MIL-STD-1916 quality sampling plans to ensure product conformity through rigorous documentation and reporting procedures. It requires adherence to established military standards for statistical sampling and inspection, emphasizing consistent quality control measures across the supply chain. The work involves defining sampling protocols, collecting and analyzing data, and generating compliance reports to verify that delivered products meet specified technical and quality requirements. This subcontract is solicited by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with performance scheduled to take place in Tracy, California, at the zip code 95304-5000. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026. It falls under NAICS code 541370, which corresponds to other scientific and technical consulting services, indicating that the scope includes technical advisory and quality management support rather than direct manufacturing. Participation requires a thorough understanding of MIL-STD-1916 and the ability to integrate compliant processes into existing operational frameworks.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Solicitation # SPE8E6-26-T-3551

The contract pertains to the procurement of two ROD, WELDING units identified by NSN 3439-01-696-3835 under solicitation number SPE8E6-26-T-3551, issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 30, 2026, with a response deadline set for July 13, 2026, indicating a two-week window for potential vendors to submit bids. The requirement is classified as a federal procurement with no specific set-aside designation, and the place of performance and office address details are not provided, though the contracting entity is based in the United States. All correspondence and submissions must be coordinated through the designated DIBBS platform linked in the contract data.

Welding and Soldering Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2104

The contract pertains to the procurement of 12-volt lead acid storage batteries, specifically the Power-Sonic Corporation model PG-12V35FR, with a total quantity of 90 units distributed across multiple Navy vessels. These batteries are commercial off-the-shelf items with a mandatory Type I shelf life of 12 months, non-extendable, and must be supplied with two bolts and two washers for terminal cable attachment. Strict compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements is enforced, including the special marking code 32 to indicate shelf life classification. All shipments must adhere to DLA packaging and palletization rules, with hazardous materials handling governed by IP025, and mercury or mercury compounds are prohibited except where functionally necessary and explicitly authorized. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise specified. The contract uses a firm fixed price with zero quantity variance, origin inspection and acceptance, and FOB origin terms. Delivery must occur within 60 days of award, and all items must be shipped via traceable freight using VSM, explicitly forbidding parcel post. Each shipment is directed to specific Navy vessel addresses using RDD codes, with transportation governed by DLAD procedural notes, and delivery timelines are individually assigned, ranging from March to June 2026.

Battery Manufacturing

POSTED

about 16 hours ago

DEADLINE

CRYSTAL UNIT, QUARTZ

Solicitation # SPE7M5-26-Q-0812

A crystal unit, quartz with NSN 5955-00-831-6446 is being solicited under contract number SPE7M5-26-Q-0812 by the Defense Logistics Agency on behalf of the Department of Defense. The request is for a single unit with purchase request number 7017418127, and the solicitation was posted on July 31, 2026, with a response deadline of August 7, 2026. This is a federal procurement action with no set-aside classification specified, indicating it is open to all qualified vendors. The place of performance and office address details are not provided, but the contract is managed within the U.S. federal procurement system. Interested parties must submit responses prior to the deadline via the official DIBBS platform through the provided link.

Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

AMPLIFIER, RADIO FRE

Solicitation # SPE7M5-26-Q-0766

The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for 41 units of an amplifier, radio frequency, identified by NSN 5996-01-390-3676, under purchase request 7017384568. The solicitation, numbered SPE7M5-26-Q-0766, was posted on July 31, 2026, with a response deadline of August 10, 2026. The contract is open to federal suppliers and does not specify a set-aside preference or NAICS code. Performance location and point of contact details are not provided, but the solicitation is administered through the DLA’s DIBBS platform, and all submissions must be made via the official link provided. The requirement is for a critical radio frequency component used in defense systems, and timely response is essential to meet operational needs.

Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

POST, FENCE, METAL

Solicitation # SPE8E6-26-T-3754

The contract involves the procurement of 92 units of zinc-coated steel pipe fence posts, each measuring 4.0 inches outside diameter and 13.0 feet overall length, with a weight of 9.11 pounds per foot, intended for use as gate posts in chain link fencing systems. The product is identified by NSN 5660-01-015-9800 and must conform to Federal Specification RR-F-191K Revision K dated February 13, 2023, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting provisions in other standards. Packaging must adhere to ASTM D3951 and fully comply with RP001, DLA’s Packaging Requirements for Procurement, including palletization, while labeling and marking must strictly follow MIL-STD-129, incorporating barcodes and unit of issue data as specified. The items are to be delivered FOB origin with a strict delivery window of five days to Sweihan Air Base, AE, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The total contract value is $8,464.00 at a unit price of $92.00 per unit, with delivery required no later than July 17, 2026. All submissions must be made through the DIBBS portal by the proposal deadline, and invoicing is mandatory via Wide Area WorkFlow with electronic payment instructions governed by DFARS clauses. The contract incorporates multiple FAR and DFARS clauses related to employment equity, trafficking in persons, sustainable products, hazardous material labeling, cybersecurity, subcontracting, and maritime transport, including a strict requirement that sea shipments must use U.S.-flag vessels with 45-day advance notice for waivers. Compliance with safety data sheet requirements and hazardous material declarations is mandatory, and all subcontractors must flow down applicable clauses. Offerors must provide their Unique Entity ID and CAGE code and make accurate socioeconomic representations. Deviations from standard clauses are permitted under specific government-issued deviation numbers, and the contractor is responsible for ensuring all material, packaging, and shipping documentation meets federal and agency standards without exception.

Rolled Steel Shape Manufacturing

POSTED

about 16 hours ago

DEADLINE

POWER SUPPLY ASSEMBLY

Solicitation # SPE7L7-26-T-4377

The contract involves the procurement of a single Power Supply Assembly, identified by NSN 6130-01-476-2036, under solicitation SPE7L7-26-T-4377 issued by the Defense Logistics Agency. Delivery is required within 20 days after order placement to the destination address associated with USS PATRIOT MCM 7 at FPO AP 96675, with FOB DESTINATION terms applying. The contractor, K D K ELECTRONICS, INC., must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements and governed by MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, labeling, and barcoding, including UCC/ITF-14 and Data Matrix symbols. Zero tolerance is enforced for quantity variance, and all hardware must be free of intentional mercury or mercury compounds, with limited exceptions for specific functional applications compliant with NAVSEA 5100-003D. Cyberspace requirements mandate CMMC Level 2 self-assessment and full compliance with the NIST SP 800-171 DOD Assessment Requirements and DFARS 252.204-7012 for safeguarding covered defense information, alongside the Basic Safeguarding of Covered Contractor Information Systems clause. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero acceptance criteria unless otherwise specified. The contract includes clauses requiring adherence to environmental prohibitions such as the elimination of hexavalent chromium and proper handling of hazardous materials, with mandatory submission of Safety Data Sheets prior to award. Payment must be processed exclusively through WAWF using approved document types like the Invoice and Receiving Report, and the contractor must maintain an active UEI and CAGE code while certifying its small business status if applicable. All submissions must be made via DIBBS by the deadline of August 5, 2026, with no alternative submission methods permitted.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-3635

The contract pertains to the procurement of one gate valve with NSN 4820-01-465-8423 under solicitation SPE7MC-26-T-3635, issued by the Defense Logistics Agency on behalf of the Department of Defense. The item is required for delivery within five days of award, with a response deadline of August 5, 2026, and is classified under NAICS code 332911. The procurement is subject to the DLA Packaging Requirements and incorporates all technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on the acquisition size. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware unless explicitly exempted, such as in functional batteries, fluorescent lights, designated instruments, sensors, controls, weapon systems, or specific chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or portable instruments containing mercury must be shockproof and include a secondary containment barrier to prevent leakage, in compliance with NAVSEA 5100-003D. The sole point of contact for the solicitation is Tracy Smith, reachable via email and phone, with performance required at the location identified by zip code 93928-7156 in Jolon.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-142D

The contract is for the procurement of one ball valve with NSN 4820015636585 under solicitation SPE7MC-26-T-142D issued by the Defense Logistics Agency. Delivery is required within 20 days of order issuance to the USS MESA VERDE LPD 19 at FPO AE 09578, with all shipments going FOB destination and no variance allowed in quantity. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all markings must include the correct Unit of Issue and Quantity per Unit Pack. The valve must not contain mercury or mercury compounds except in specific exempted uses such as functional batteries or sensors, and any portable devices containing mercury must have shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and the Government retains full authority to reject nonconforming supplies. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting commercial standards. The contract incorporates multiple Federal Acquisition Regulation clauses including 52.246-2 for inspection, 52.249-8 for default, 52.227-1 Alternates I and II for authorization and consent, and 52.222-50 and 52.222-54 for combating trafficking and employment eligibility verification, all with deviations effective in 2026. Defense-specific clauses under DFARS include 252.240-7997 for NIST 800-171 compliance, 252.232-7010 for levies on payments, 252.246-7003 for safety issue notifications, and 252.223-7001 for hazardous material labeling. Invoicing must be processed exclusively through Wide Area WorkFlow, and payment routing relies on DoDAACs not detailed in the solicitation. Offerors must provide a Unique Entity ID and CAGE code, and may claim small business or socioeconomic status benefits including HUBZone, 8(a), WOSB, or SDVOSB, with automated award preferences applied. Compliance with safeguarding contractor information systems

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

TOOL, PULLING, MALE, DIVI

Solicitation # SPE8E6-26-Q-0607

The contract is for a single unit of a pulling male diving tool designated under the NSN 4220-01-130-5526, part of the MK 12 Diving System, with a delivery requirement of 60 days after delivery order. The solicitation number is SPE8E6-26-Q-0607, issued by the Defense Logistics Agency under the Department of Defense, with a response deadline of August 10, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date based on acquisition scale. Packaging must comply with DLA standards, and the item has no shelf life. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons, including foreign nationals within the United States. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, submitted the DLA Export-Controlled Technical Data Questionnaire, and received formal approval from the DLA controlling authority. DFARS 252.225-7048 governs the handling of this controlled technical data, and government identification must be removed from non-accepted supplies. The point of contact for this solicitation is Jasmine Jiles, with primary communication via email and phone.

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E8-26-T-4762

The contract pertains to the procurement of one marine toilet, identified by NSN 4510016022193 and manufactured by Dometic Corporation under part number 301197506, with three identical line items totaling three units to be delivered. All items are subject to a strict five-day delivery window from award, with FOB Origin terms meaning title transfers at the supplier’s location, and final acceptance occurring upon delivery to the designated Virginia Beach facility. Packaging must comply with ASTM D3951 but is overridden by the DLA Master List of Technical and Quality Requirements, which takes absolute precedence; palletization must follow RP001, and all items must be marked and labeled per MIL-STD-129 with proper NSN, lot number, and machine-readable barcoding. Parcel post is strictly prohibited, and shipments must be sent via the fastest traceable means with RDD 777 designation. The solicitation, identified as SPE8E8-26-T-4762, has a response deadline of August 5, 2026, and requires electronic submission through DIBBS. Pricing is not specified in the document, indicating a blank solicitation for offeror responses, with no total contract value stated. Compliance with extensive FAR and DFARS clauses is mandatory, including cybersecurity safeguards under 252.204-7012, safeguarding covered defense information, combating human trafficking, employment eligibility verification, sustainable product use, hazardous materials identification, and whistleblower protections. Offerors must hold a current UEI and CAGE code and disclose socioeconomic status, including small business or veteran-owned certifications if applicable. Any use of covered defense telecommunications equipment triggers additional disclosures. Inspection and acceptance occur at the destination, and invoice submission must be electronic through WAWF. The contract requires adherence to strict documentation protocols, including the use of standardized reporting formats and compliance with all DLA packaging, marking, and transportation directives.

Plastics Plumbing Fixture Manufacturing

POSTED

about 16 hours ago

DEADLINE

PLATE METAL 4 X 48 X 4

Solicitation # SPEFA5-26-Q-0067

The contract specifies the procurement of plate metal in accordance with MMS-1420, equivalent to AMS4050 Rev K, made from 7050-T7451 aluminum alloy with dimensions of 4 inches by 48 inches by 48 inches. A total of 48 pieces are required under solicitation SPEFA5-26-Q-0067, with a firm fixed price and zero tolerance for quantity variance. All materials must be packed in compliance with ASTM D3951 and labeled per MIL-STD-129, with palletization following DLA packaging requirements, and shipped by the fastest traceable means—parcel post is prohibited. The delivery destination is Fleet Readiness Center East at Cherry Point, North Carolina, with an acceptance point at destination and a 30-day delivery window from award. A Certificate of Quality Conformance is mandatory, and metal certification data must comply with applicable CDRLs and the DLA Master List of Technical and Quality Requirements, which supersede all other standards. Sampling must meet MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and inspection is performed upon arrival. The item has no shelf life and is identified by NSN 9535-LL-NCA-3083 with a required delivery date of July 23, 2026.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E6-26-Q-0606

This contract pertains to the procurement of four Diver’s Knives with NSN 4220-00-372-0665 under solicitation SPE8E6-26-Q-0606, issued by the Defense Logistics Agency. The item must be manufactured in strict accordance with drawing 921557 and associated technical documentation, including qualified assurance provisions and updated revisions as referenced. Material specifications cited in the original drawing, such as MIL-B-16541 and MIL-I-763, are obsolete; acceptable alternatives include any current bronze specification equal to or better than Grade A bronze and any varnished maple hardwood. Production may require casting or forging, and the government does not provide associated tooling, necessitating contractors to submit a Casting and Forging Assistance Request for support. Inspection and acceptance occur at destination, with firm fixed pricing and zero variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-B-117 standards, with marking per MIL-STD-129 and no special markings required. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Tolerances for machined and casting dimensions are defined by strict dimensional allowances based on size ranges, with angular tolerances set at ±0°30′. The supply is subject to full and open competition, with no restrictions on bidder eligibility. Mercury or mercury-containing compounds are prohibited in or on the item except for specific functional uses such as batteries, instruments, or sensors as outlined in NAVSEA 5100-003D, with additional containment requirements for portable devices. The contract incorporates all applicable technical and quality requirements from the DLA Master List of Requirements, referenced by R or I numbers, with revisions governed by the solicitation or award date depending on acquisition size. Delivery is required within 60 days after award, with FOB origin terms and transportation details directed to the Commander, SRF-JRMC Yokosuka Naval Base in Japan. The unit of issue is each, with pricing and order quantity fixed at four units. The contract includes provisions for the removal of government identification from non-accepted supplies and affirms that covered defense information may apply. The item is procured to support a specific government

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

about 16 hours ago

DEADLINE