Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Assurance and Sampling Compliance (MIL-STD-1916)

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the implementation of MIL-STD-1916 quality sampling plans to ensure product conformity through rigorous documentation and reporting procedures. It requires adherence to established military standards for statistical sampling and inspection, emphasizing consistent quality control measures across the supply chain. The work involves defining sampling protocols, collecting and analyzing data, and generating compliance reports to verify that delivered products meet specified technical and quality requirements. This subcontract is solicited by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with performance scheduled to take place in Tracy, California, at the zip code 95304-5000. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026. It falls under NAICS code 541370, which corresponds to other scientific and technical consulting services, indicating that the scope includes technical advisory and quality management support rather than direct manufacturing. Participation requires a thorough understanding of MIL-STD-1916 and the ability to integrate compliant processes into existing operational frameworks.

General Info

Implement MIL-STD-1916 quality sampling and reporting for DoD compliance in Tracy, California.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

541370 - Surveying and Mapping (except Geophysical) ServicesView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Implementation of MIL-STD-1916 quality sampling plans, including documentation and reporting to ensure product conformity.

Similar Contracts

Same NAICS industry code

Survey and Mapping Services IDIQThe Port of Seattle is seeking qualified firms or teams to provide Survey and Mapping Services through an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract, with the solicitation posted on July 31, 2026. All survey work must adhere to strict geographic and vertical datum standards: at Airport facilities, surveys must use the Seattle-Tacoma International Airport Grid System or NAD83, while Seaport facilities require NAD83 or Seattle Tidelands as directed. Vertical control is governed by NGVD 29, STIA Vertical Datum, MLLW, or NAVD88, with any deviations requiring written approval from the Port Manager of Survey and Mapping. All land surveying activities must comply with现行 Washington Administrative Code and Revised Code of Washington regulations. Services will be performed under the direct supervision of the Port Manager of Survey and Mapping Services or their designated representative, encompassing both field and office-based support. The primary point of contact for inquiries is Hala Rabbo, with Ann Davidson listed as the Project Manager, and the contract is classified under NAICS code 541370 for Surveying and Mapping Services.

Construction Management

POSTED

about 1 hour ago

DEADLINE

TBIPS - Geomatics Analyst for Mapping & Charting Establishment

Solicitation # W1786-26-X002

The Department of National Defence is seeking to award a single contract for Task-Based Informatics Professional Services to a qualified Supply Arrangement Holder under EN578-170432, Tier 1, specifically for a Geomatics Analyst Level 2 within the National Capital Region. Only twelve pre-qualified vendors have been invited to submit proposals, including prominent firms such as CGI, Stantec, MAXSYS, and Procom. The role requires delivering geomatics engineering, IT infrastructure development and sustainment, and support for new data workflows and applications to serve the Mapping and Charting Establishment and the broader Canadian Armed Forces. The contract is expected to span up to 480 days of effort and will commence on or around 31 August 2028. Access to Controlled Goods is included, and all personnel must meet a Secret security clearance level, with the contractor organization required to undergo Designated Organization Screening. Bidders do not need to hold security clearances at the time of proposal submission but must be able to meet the requirement if selected. The Crown maintains the right to negotiate with any bidder, and proposals may be submitted in either official language. All inquiries must be directed to the Contracting Authority, Valery Plourde, and solicitation documents will be distributed directly via email—not through CanadaBuys. Proposals are due by 19:00 on 10 August 2026, and successful bidders may request a debriefing within 15 working days of receiving bid results.

Department of National Defence

POSTED

DEADLINE

Concrete Moisture and Adhesion TestingThe contract requires performing concrete moisture testing in accordance with ASTM F2170 or F1869 standards and installing an approved adhesion test patch prior to surfacing, ensuring the substrate meets necessary performance criteria for subsequent flooring or coating applications. The work is scoped under a subcontract for the County of Maui in Hawaii, with a response deadline of September 1, 2026, and is classified under NAICS code 541370 for architectural and engineering services. The testing must be conducted accurately to assess moisture levels and verify surface readiness, with the adhesion patch serving as a critical validation step to confirm proper bonding potential before any surfacing materials are applied. All work must comply with the specified standards and be completed in alignment with the project’s technical requirements to ensure long-term durability and safety of the finished surface.

POSTED

DEADLINE

in about 1 month

Quality Control Testing and Inspection ServicesThe contract seeks third-party testing and inspection services to verify material compliance, fire ratings, structural performance, and field quality assurance for projects under the State of Iowa. The services are intended to ensure that all materials and constructions meet required safety and performance standards through comprehensive evaluations conducted by qualified external laboratories or inspectors. The work will involve a range of assessments from laboratory analysis to on-site verification, targeting critical performance criteria essential for public infrastructure and building integrity. This is a subcontract opportunity posted on July 30, 2026, with a response deadline of August 20, 2026. It is classified under NAICS code 541370, which covers engineering services, and is managed by the Iowa agency under the DASIowa procurement system. There is no set-aside designation specified, and the place of performance and office address details are not provided, indicating the work may occur across multiple locations within the state. Interested parties must submit proposals through the provided online portal before the deadline to be considered for award.

POSTED

DEADLINE

Construction Administration & OversightThe contract entails the provision of on-site project management, inspection, and reporting services throughout the construction phase to ensure full compliance with approved design specifications, established budget parameters, and Section 3 requirements aimed at promoting economic opportunity for low-income individuals and businesses. The role requires continuous presence at the construction site to monitor progress, verify adherence to plans, identify deviations, and submit regular documentation that supports accountability and regulatory alignment. All activities must be conducted in accordance with the standards and expectations set forth by the City of Griffin, Georgia, and are governed under the NAICS code 541370, which classifies the services as architectural, engineering, and related technical consulting. Subcontractors seeking to bid on this opportunity must respond by the deadline of September 4, 2026, and are expected to demonstrate proven experience in construction oversight, familiarity with Section 3 compliance protocols, and the ability to coordinate effectively with contractors, engineers, and city officials. The solicitation is issued under the City of Griffin’s procurement system, with performance expected to occur at an unspecified location within Georgia, and bidders must be prepared to meet all administrative, technical, and reporting obligations without reliance on external documentation or references beyond the scope of the issued requirements.

City of Griffin

POSTED

DEADLINE

in about 1 month

Surveying and Site Assessment ServicesThe contract titled Surveying and Site Assessment Services requires the execution of topographic, boundary, and construction surveys to support environmental and development planning efforts in Ione, California, with a zip code of 95640. The work involves precise geospatial mapping that must be seamlessly integrated with CEQA documentation to ensure compliance with state environmental regulations. This subcontract is issued by the California Department of General Services, Real Estate Services Division, Project Management and Development Branch, and is focused on enabling informed decision-making for land use and infrastructure projects. Respondents must submit proposals by August 26, 2026, and the North American Industry Classification System code for this service is 541370, indicating it falls under surveying and mapping services. The place of performance is specifically tied to the Ione location, and all deliverables must align with the project’s planning, environmental review, and construction readiness objectives.

Department of General Services, Real Estate Services Division, Project Management and Development Branch (DGS, RESD, PMDB)

POSTED

DEADLINE

Surveying and Site Layout ServicesThe contract is for surveying and site layout services to support excavation, alignment, and utility coordination activities in Yountville, California, with a ZIP code of 94599. It is classified as a subcontract under NAICS code 541370, which pertains to surveying and mapping services. The work is required to ensure accurate topographic and as-built data collection essential for precise construction planning and coordination with existing utilities. The solicitation was posted on July 30, 2026, and responses are due by August 11, 2026. The contracting authority is the California Department of General Services, Real Estate Services Division, Project Management and Development Branch, with all performance work localized to the specified site in Yountville. Although no point of contact is provided, the proposal must be submitted through the designated online platform accessible via the provided link.

Department of General Services, Real Estate Services Division, Project Management and Development Branch

POSTED

DEADLINE

Inspection and Acceptance at Origin SupportThe contract supports government inspection at origin by coordinating critical quality assurance activities including documentation, sample preparation, and Product Verification Testing to ensure full compliance with AS9003 and Defense Logistics Agency standards. The work requires close collaboration with suppliers and inspection authorities to verify that products meet technical and regulatory requirements prior to shipment, with emphasis on precision, traceability, and adherence to defense-specific quality protocols. All activities must align with the rigorous expectations of the Department of Defense and are performance-based to guarantee consistent product acceptance. Performed at the place of performance in Tracy, California, this subcontract falls under NAICS code 541370 and is open for bidding with a response deadline of August 10, 2026. The solicitation is issued by the Land Supply Chain under the Department of Defense, and while no specific set-aside status is designated, participation is contingent on the ability to fully implement the inspection and verification protocols outlined. The contract does not include a designated point of contact, and all inquiries must be directed through the official DIBBS platform using the provided solicitation link.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Surveying and Site LayoutThe contract involves comprehensive topographic surveying, boundary marking, and site layout services to support construction alignment and grading operations at Tinker Air Force Base, with a zip code of 73145-8000. The work is classified under NAICS code 541370, indicating specialized surveying services, and is structured as a subcontract under the Department of Defense. The solicitation was posted on July 30, 2026, with responses due by August 14, 2026, providing a two-week window for qualified contractors to submit proposals. The performance location is fixed at Tinker AFB, requiring precise geospatial data collection and monumentation to ensure accurate positioning for infrastructure development. While no specific point of contact or set-aside details are provided, the contract is open to eligible subcontractors seeking to support defense-related site preparation activities.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

SRRA ArcGIS GIS Mapping Project

Solicitation # RFP-125352

The Southwest Regional Recreation Authority, operating as Spearhead Trails, is seeking a qualified GIS contractor to support the standardization and integration of field data across its seven trail systems spanning approximately 400 miles in Southwest Virginia. The contractor will collaborate directly with SRRA rangers to unify disparate data collection methods and develop a single authoritative master GIS layer that accurately represents the entire trail network. This project aims to improve operational efficiency, enhance trail management, and provide a reliable geospatial foundation for future planning and public access initiatives. The solicitation, numbered RFP-125352, was posted on July 30, 2026, with a response deadline of August 14, 2026. Work will be performed across the Spearhead Trail System in Southwest Virginia, and all proposals must be submitted through the designated vendor portal. James Marcum is the point of contact for inquiries, reachable via email or phone, and the contracting entity is a state and local government agency under the jurisdiction of Virginia. The project does not specify a set-aside designation or NAICS code, and the contractor must be prepared to deliver a comprehensive, standardized GIS dataset compatible with ArcGIS systems and aligned with SRRA’s operational needs.

Southwest Virginia Regional Recreation Authority

POSTED

DEADLINE

High-Precision Positioning Network Technical SupportThe contract seeks technical support for the High-Precision Positioning Network to ensure the reliability and integrity of software-driven positioning services critical to Florida’s transportation planning, construction projects, emergency response operations, and structural monitoring systems. The contractor will be responsible for ongoing technical oversight, real-time troubleshooting, and maintenance to maintain continuous system uptime and accurate data flow across all intended applications, requiring expertise in high-precision geospatial technologies and robust software infrastructure management. The solicitation is issued as a subcontract under NAICS code 541370, with a response deadline of August 20, 2026, and was posted on July 30, 2026. The Florida Department of Transportation is the contracting agency, and performance is expected to support statewide infrastructure initiatives, though specific geographic locations are not detailed. The nature of the work demands proactive monitoring, rapid incident resolution, and adherence to strict data quality standards to support mission-critical state functions.

Florida Department of Transportation

POSTED

DEADLINE

Surveying and Site Layout ServicesThe contract awards surveying and site layout services for a Department of Defense project located at JBPHH, 96853, under a Small Business Set Aside designation, exclusively available to small businesses. The work involves establishing precise site control points, accurately laying out building footprints according to design specifications, and conducting as-built verification to ensure constructed elements match approved plans. These tasks are essential for ensuring construction accuracy, regulatory compliance, and long-term structural integrity on the military installation. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and falls under NAICS code 541370 for surveying and mapping services. The contract is structured as a subcontract, indicating it supports a larger procurement effort managed by the FA5215 766 Ess Pkp office.

FA5215 766 Ess Pkp

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

TRANSMITTER, PRESSURE

Solicitation # SPE4A5-26-Q-0661

The contract pertains to the procurement of 75 pressure transmitters, identified by NSN 6685-21-912-0457 and part number 622712-2-1 from Honeywell Limited, classified as a commercial item and designated as a critical application item. The requirement is firm fixed price with no variance allowed in quantity, and delivery is mandated 477 days after award date. Inspection and acceptance occur at origin, and the item is to be shipped FOB origin. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced with R-numbers including RC001, RP001, RQ011, and RT001, which take precedence over any other standards. Packaging must conform to MIL-STD-129 and RP001, with hazardous materials adhering to FED-STD-313 and IP025, while non-hazardous items follow ASTM D3951 unless superseded by DLA requirements. Unit of issue is each, and palletization must meet DLA packaging standards. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery destination is Warner Robbins Air Force Base with specific parcel post and freight shipping addresses provided, and the material need date is June 7, 2028.

POSTED

about 13 hours ago

DEADLINE

TRANSMITTER, PRESSUR

Solicitation # SPE4A5-25-T-785M

The contract involves the procurement of five units of the NSN 6685013158618 Transmitter, Pressure, which is designated for delivery to the DLA Distribution at W1A8 within 171 days after award. The procurement is set aside exclusively for Women-Owned Small Businesses (WOSB) under NAICS code 334512, emphasizing opportunities for eligible small business vendors. The solicitation is issued as a Request for Quotation (RFQ), accessible electronically through the provided link, with no hard copies or detailed specifications, plans, or drawings available. All responsible sources are encouraged to submit quotes by the deadline of October 1, 2025, and submissions must be made electronically. The contracting agency is DLA Aviation, part of the Department of Defense, based in Richmond, Virginia. Questions regarding the solicitation should be directed via email to the designated point of contact, with further details available through the official DIBBS website. The contract emphasizes timely response and compliance with the set-aside criteria, ensuring that qualified small businesses, particularly women-owned, have the opportunity to participate in fulfilling this procurement requirement.

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE4A5-26-Q-0618

The contract pertains to the procurement of three non-magnetic shackles identified by NSN 4030-01-481-9608 under solicitation SPE4A5-26-Q-0618, with a firm fixed price and zero variance in quantity. Delivery is required within 76 days after order date, with inspection and acceptance occurring at origin, and delivery terms set to FOB destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA's RP001 packaging requirements, including preservation methods, material specifications, and MIL-STD-129 marking without special markings. Mercury and mercury-containing compounds are prohibited in all aspects of the supply chain including preservation, packaging, and direct contact with hardware, except for specific permitted applications such as batteries, fluorescent lamps, sensors, or weapon systems as outlined by NAVSEA, which must include secondary containment. Ozone-depleting substances are entirely banned, regardless of any conflicting specification language, and all substitutions require prior approval. Technical data is proprietary or insufficient, precluding competitive sourcing, and casting or forging may be necessary for manufacturing, requiring suppliers to request tooling and material assistance through DLA’s designated channels. The item is subject to zero-based sampling per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Item unique identification is not required per customer request, but compliance with the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date based on acquisition type. The contract is a total small business set-aside, and all deliveries must be addressed to DLA Distribution in San Diego, California.

POSTED

about 13 hours ago

DEADLINE

LIGHT, NAVIGATIONAL, AIR

Solicitation # SPE4A5-26-Q-0660

This contract is for the procurement of two units of a light, navigational aircraft component identified by NSN 6220-01-454-3041 and part number 30-2443-2 from Grimes Aerospace Company. The item is classified as a critical safety item and a commercial product of a type, subject to stringent quality oversight including SAE AS9100 requirements for manufacturers and non-manufacturers. All supplies must comply with MIL-STD-129 marking standards, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, with special fragile labeling. Unit packaging and palletization must adhere to MIL-STD-2073-1E and DLA packaging requirements, with no government identification removed from non-accepted items. Inspection and acceptance occur at origin, with firm fixed pricing and zero variance allowed in quantity. Delivery is due 333 days after order date, with FOB origin terms, and freight is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Cybersecurity requirements include CMMC Level 2 self-assessment, and all deviations or waivers require formal approval from the DSC Contracting Officer. Technical and quality requirements are drawn from the DLA Master List, with documentation tied to QAP-106 Revision B dated July 9, 2012, and the item is not subject to Item Unique Identification per Service customer request.

POSTED

about 13 hours ago

DEADLINE

TRANSFORMER, POWER

Solicitation # SPE4A5-26-T-308A

The contract pertains to the procurement of a power transformer, specifically identifiable by part number 397849-07403 and NSN 5950009576725, designated as a critical application item supplied by SIMMONDS PRECISION PRODUCTS INC. The requirement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and compliance with MIL-STD-129 for labeling and packaging. The item must be packaged in accordance with Fed-Std-313, using IP025 for hazardous materials or commercial packaging otherwise, and palletized per DLA Packaging Requirements. The transformer is subject to zero defect acceptance under MIL-STD-1916 or an equivalent zero-based sampling plan, with all attributes treated as major unless otherwise specified, and inspection and acceptance occur at the destination. Cybersecurity requirements include a CMMC Level 2 Self-Assessment and adherence to rules for covered defense information. Delivery is FOB origin within five days of contract award to the Marine Aviation Logistics Squadron 16 in San Diego, with shipment required via the fastest traceable means excluding parcel post. The contract specifies a fixed quantity of one unit, with no variance allowed, and an original delivery date of July 23, 2026, under solicitation SPE4A5-26-T-308A. The unit of issue is each, and all packaging must reflect the prescribed QUP and DLA-recognized labeling. Additional compliance obligations include physical identification of the item, proper use of measuring and test equipment, and removal of government identification from non-accepted supplies.

Welding and Soldering Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

HOUSING, AIR OUTLET,

Solicitation # SPE4A5-26-T-306Q

The contract pertains to the procurement of one Housing, Air Outlet with NSN 1660-01-665-6502 and part number 189386-2, supplied by Honeywell International Inc., under solicitation SPE4A5-26-T-306Q. Delivery is required within 169 days of award, with FOB origin terms and inspection and acceptance points at the destination. The item is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and palletization must adhere to specified military standards. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise contracted, and attributes are to be classified with corresponding verification levels or AQLs. Item Unique Identification is not required per the Service customer's direction. The supplier must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and handle covered defense information in accordance with RD002. Accelerated life testing at 105% of rated voltage is an acceptable alternative to standard voltage testing. The delivery destination is Tinker AFB, Oklahoma, and all labeling, marking, and documentation must reflect the contract’s exact specifications, including the provided parcel post and freight shipping addresses. The unit of issue is EA, with no variance permitted in quantity, and the original required delivery date is February 13, 2028, with a need ship date of January 17, 2027.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

ADAPTER, STRAIGHT, FL

Solicitation # SPE4A5-26-T-299Z

The contract specifies the procurement of a straight flange-to-tube adapter with part number 9969M50P02 from General Electric Company and NSN 4730-01-196-6006, for a quantity of two units. The item is designated as a critical application item and is subject to stringent technical and quality requirements as defined by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and all items must be palletized and labeled per prescribed guidelines. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and unspecified attributes are treated as major. The item does not require unique identification per DFARS 252.211-7003(c)(1)(i) and has no shelf life restriction. Delivery is FOB origin with a 171-day lead time, and the required delivery date is November 27, 2027, with a need ship date of January 17, 2027. The contract mandates zero variance in quantity and requires inspection and acceptance to occur at the point of origin. All packaging and markings must conform to DLA standards, and shipping is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, in accordance with DLAD Proc Note C19 and C20.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

MOTOR-TACHOMETER GE

Solicitation # SPE4A5-26-T-307W

The solicitation SPE4A5-26-T-307W seeks a single MOTOR-TACHOMETER GE with NSN 6105-00-068-7214, to be delivered within five days after award to the designated delivery point at Naval Base Coronado, San Diego, CA 92135-5017 under FOB DESTINATION terms. The contract is a simplified acquisition targeting automated award, with an estimated value of $147,109 based on multiple line items across various quantities and unit prices. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with compliance mandated through clauses RA001 and RQ001. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attributes are assigned AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor defects. Packaging and preservation must conform to MIL-STD-2073-1E, including Method 51 for dry cold storage, while labeling and barcoding adhere strictly to MIL-STD-129 with 2D Data Matrix symbols mandated for Defense shipments. Bare item marking is required under RQ017, and any unidentified attributes default to major classification. Compliance with cybersecurity standards includes a CMMC Level 2 self-assessment and adherence to NIST SP 800-171 via clause 252.240-7997. Contractors must submit payment requests and receiving reports exclusively through Wide Area WorkFlow (WAWF) and are subject to DFARS clauses prohibiting hexavalent chromium, hazardous material storage, and acquisition of items from Communist Chinese military companies. Employment practices must comply with clauses addressing equal opportunity, trafficking in persons, and employment eligibility verification. All contractual obligations are fixed-price under FAR 52.246-2, with final inspection and acceptance occurring at destination. The contract includes clauses for accelerated payments to small business subcontractors, unenforceability of unauthorized obligations, and electronic submission of payment data. No formal evaluation factors are listed, implying a potential LPTA award methodology. Offerors must provide their UEI or CAGE code and complete all required representations, though no specific socioeconomic certifications are indicated. No attachments are formally listed

Motor and Generator Manufacturing

POSTED

about 13 hours ago

DEADLINE

PANEL, STRUCTURAL, AI

Solicitation # SPE4A5-26-T-308G

The contract pertains to the procurement of a structural panel, AI, identified by NSN 1560016882236 and part number 113T1617Y103, with three separate line items each for one unit, delivered under solicitation SPE4A5-26-T-308G. Delivery is required within five days of order, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All items must comply with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA packaging directives, with no special marking codes applied. Palletization must adhere to DLA procurement packaging rules, and shipment must be sent via traceable freight methods; parcel post is explicitly prohibited. The part is designated a critical application item and must meet FAA airworthiness approval standards under RQ019, including conformance certification. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and configuration change management procedures apply through RQ002. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and verification levels for attributes are strictly defined. The item is excluded from Unique Item Identification per government request. Required delivery dates vary slightly across line items, with the latest due on July 21, 2026, and all shipments are directed to McConnell AFB, Kansas, with specific government use identifiers and project codes appended. The contract references technical and quality requirements from the DLA Master List, governing revisions based on acquisition type and amendment dates.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

SHAFT ASSEMBLY, ACTU

Solicitation # SPE4A5-26-T-307M

The contract pertains to the procurement of a single shaft assembly, actuator, identified by NSN 1680-01-011-8060 and part number AA8586 manufactured by Simmonds Precision Products Inc. Delivery is required within 172 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The unit of issue is each (EA), with no variance permitted in quantity. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RA001, RP001, RQ002, RQ011, RQ017, and RT001, which override any conflicting standards. Packaging must comply with ASTM D3951 and MIL-STD-129, aligned with DLA Packaging Requirements for Procurement, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and identification of critical, major, and minor attributes must adhere to specified verification levels or AQLs. Configuration change management, deviation requests, and removal of government identification are strictly controlled. The item is classified as a critical application component. Delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of February 1, 2026, though the original delivery target is February 1, 2027. The solicitation was issued under SPE4A5-26-T-307M with a response deadline of July 31, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

SENSOR ASSY, SKIN TE

Solicitation # SPE4A5-26-T-307L

The contract pertains to the procurement of a Sensor Assembly, Skin Temperature, identified by the NSN 1680-00-792-9233 and part number 969-0032-001, supplied by Honeywell International Inc. and Acron Aviation Inc. The item is classified as a commercial item and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which take precedence over all other specifications. The manufacturing and delivery must adhere to DLA packaging standards per RP001 and MIL-STD-129, with all packaging compliant with ASTM D3951 unless superseded by DLA requirements. Physical marking of the bare item is mandated, and while Item Unique Identification is not required, government identification must be removed from non-accepted supplies. Quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, and inspection and acceptance occur at the destination. The contract specifies a delivery requirement of 133 days FOB origin, with no variance allowed in quantity, and a total of 67 units to be delivered to Tinker AFB, Oklahoma. The unit price is $67.00 per unit, totaling $4,489.00. Cybersecurity compliance is enforced through CMMC Level 2 self-assessment, and all suppliers must meet the DLA’s stringent quality and documentation protocols including source approval requests. The solicitation is a Total Small Business Set-Aside under NAICS 336413, with responses due by July 31, 2026, and performance required by July 21, 2026. Transportation and shipping instructions follow DLA procedural notes C19 and C20, and all labeling, packaging, and documentation must align with the contract’s referenced standards and the specified Unit of Issue.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

SHAFT ASSEMBLY, ACTU

Solicitation # SPE4A5-26-T-9432

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE