Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SWITCH, DOOR

Active
SPE2DH-26-T-5310Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a single SWITCH, DOOR item with NSN 6530-01-501-1283 and part number 01910190 from TUTTNAUER U.S.A. CO., LTD., required for delivery within five days to Fort Campbell, Kentucky, under solicitation SPE2DH-26-T-5310. The item is classified as a critical application item and must comply with stringent packaging and marking standards, including MIL-STD-2073-1E for packaging, MMS NO. 1 for medical marking—which supersedes MIL-STD-129—and DLA packaging requirements. All shipments must be traceable,不得使用Parcel Post, and must be delivered FOB destination with zero variance in quantity. Mercury and mercury-containing compounds are prohibited unless specifically exempted for functional uses such as in batteries, fluorescent lamps, or weapon systems, with additional containment requirements for portable devices. The item is not regulated by the FDA and must adhere to applicable DoD technical and quality requirements referenced via the DLA Master List. Delivery is to be made to a government facility operated by the Department of Defense, with the shipping and mark-for address identical. The contract mandates commercial packaging in sealed, protective containers suitable for safe transport via common carrier at the lowest cost. Special handling instructions require palletization per DLA guidelines and use of designated packaging materials and methods. The contract is subject to the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date governing compliance. The point of contact is Tina Vu, and the required delivery date is July 22, 2026, with a response deadline of July 27, 2026. The item is part of a larger defense procurement initiative with tracking identifiers including RDD 999/NMCS and project code TP 1, and is intended for military medical supply chains.

General Info

Procure single door switch NSN 6530-01-501-1283, deliver FOB Fort Campbell by July 22, 2026, per MIL-STD-2073-1E and DLA standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

BLDG 5505A WICKHAM AVE, FORT CAMPBELL, KY, 42223-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DH-26-T-5310 for Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWITCH,DOOR
SWITCH, DOOR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS ITEM IS NOT REGULATED BY THE FDA.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
TUTTNAUER U.S.A. CO., LTD. 0YPC5 P/N 01910190
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017543014 0001 EA 1.000
NSN/MATERIAL:6530015011283
DELIVERY (IN DAYS):0005
SPE2DH-26-T-5310
SECTION B
PR: 7017543014 PRLI: 0001 CONT’D
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
BULK BREAK POINT:
W34GMT
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
FORT CAMPBELL KY 42223-5000
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
SPE2DH-26-T-5310
SECTION B
PR: 7017543014 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
W34GMT
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
FORT CAMPBELL KY 42223-5000
US
MARKFOR
W34GMT
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
FORT CAMPBELL KY 42223-5000
US
M/F: (TCN) W34GMT61950170
RDD: 999
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
SPE2DH-26-T-5310 NSN/Part Number: 6530-01-501-1283 Quantity: 1 EA Purchase Request: 7017543014QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
International
Purchasing of Pulse Oximeter Finger 1210020261799The Kingston Public Hospital, operating under the Government of Jamaica, is soliciting price quotations for the procurement of Pulse Oximeter Finger devices under solicitation number 2331/6751. The request is funded through public resources and requires vendors to submit quotes strictly in accordance with the detailed specifications outlined in Section 2 of the attached requirements. The solicitation was posted on July 20, 2026, with a firm response deadline of July 27, 2026, at 8:00 PM Jamaica time, leaving a limited window for potential suppliers to prepare and submit their bids. The procurement is not subject to any set-aside provisions and does not specify a NAICS code, indicating it is open to all qualified vendors without reserved status. Bids must be directed to the hospital’s official procurement channel via the provided government electronic procurement portal, as no physical point of contact or address details are listed for direct inquiries.
Kingston Public Hospital

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
International
Purchasing of Overdoor Cervical Traction System 1210020260745The Kingston Public Hospital, operating under the Government of Jamaica, is seeking price quotations for the purchase of an Overdoor Cervical Traction System as specified in the attached schedules of requirements. This procurement is funded through public resources and is being conducted under solicitation number 2331/6750, with bids due by July 27, 2026, at 8:00 PM. The system must meet all technical and operational specifications outlined in the documentation, and submissions are expected to reflect full compliance with the stated requirements. The solicitation is open to qualified suppliers, with no set-aside provisions indicated, and the place of performance will be at the hospital’s location in Jamaica. All responses must be submitted prior to the deadline to be considered.
Kingston Public Hospital

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
International
To Supply and Deliver Medical Supplies to the Princess Margaret Hospital
Princess Margaret Hospital

POSTED

about 18 hours ago

DEADLINE

N/A
View Details
NAICS: 423450
New
DIBBS
Supply of Commercial Weighing Scales (COTS)The contract calls for the procurement and delivery of 372 commercial off-the-shelf weighing scales that are fully assembled and fully compliant with National Stock Number (NSN) requirements and all U.S. Defense Logistics Agency technical specifications. Each unit must meet stringent standards for packaging, labeling, and quality control as mandated by DLA, with additional adherence to hazard communication protocols and sustainable product guidelines. If the contractor handles any covered defense information, compliance with NIST Special Publication 800-171 is required to ensure proper safeguarding of controlled unclassified information. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, with the North American Industry Classification System code 423450 applying to the procurement. The place of performance is designated as Texarkana, Texas 75507-5000, and responses are due by July 28, 2026, following the posting of the opportunity on July 20, 2026. The contracting activity is the ASC Supplier Operations OEM Division under the Department of Defense.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
SKIN CLEANSERThe contract is for the procurement of a skin cleanser containing 60 percent ethyl alcohol, packaged in 4-ounce bottles with no rinsing required, identified by NSN 8520-01-499-8145 and requiring a quantity of six bottles. The item is classified as a TYPE I (CODE M) product with a mandatory 24-month shelf life that is non-extendable, and delivery to the government must not exceed four months from the date of manufacture. Packaging must comply with DLA packaging requirements, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders must clearly state the source and part number being offered, and any non-accepted supplies must have government identification removed prior to return. The delivery timeframe is 20 days after award, with performance occurring at APO 96213-2166, and the solicitation number is SPE2DS-26-T-249M, issued on July 20, 2026, with responses due by July 27, 2026. The contract is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Marc Canalichio as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
METER, CONDUCTIVITYThe contract solicits a portable conductivity meter with solid-state construction and built-in electrodes, measuring 3 inches wide, 5 inches in diameter, and 4 inches high, accompanied by a carrying case for field use. The device is intended for testing water purified through deionization, osmosis, and boiler systems, as well as highly saline wastewater, ensuring accurate conductivity measurements in demanding environmental conditions. The item is identified by NSN 6630-01-188-5368, with a single unit required under purchase request 7017545637, and must be delivered within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific references R001, RP001, and RQ011 mandating compliance with technical specifications, packaging standards, and the removal of government identification from non-accepted supplies. The solicitation number is SPE2DH-26-T-5331, issued by the Department of Defense’s Medical Supply Chain FSH, with bids due by July 27, 2026, and bidders must clearly indicate the supplier source and part number being offered.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
TEST KIT, STREPTOCOCCIThis contract is for the procurement of 3 kits, each containing 25 rapid detection test kits for Group A Streptococcal antigen, intended for direct use with throat swabs or beta-hemolytic colonies from culture. Each kit includes individually packaged test cassettes with rabbit anti-Strep A antibody and heat-inactivated Strep A antigen, extraction reagents A and B, sterile throat swabs, tubes and tips, positive and negative controls, a package insert, and a procedure card. The kits must be stored at room temperature between 59°F and 86°F (15°C to 30°C) and have a mandatory 18-month shelf life that is non-extendable, with no more than two months elapsed from the date of manufacture to delivery to the government. All labeling must comply with Medical Marking Standard No. 1, specifying the date of manufacture, expiration or retest date, and contract or lot number. Packaging must meet commercial standards for protection and safe transport, and all units must be marked in accordance with MMS No. 1, superseding MIL-STD-129. The acquisition is governed by DLA technical and quality requirements and applies to a Type I (Code K) medical item. The contract number is SPE2DS-26-T-251C, with a delivery deadline of 20 days after order, and the point of contact is Kendall Jones of the Department of Defense Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
BOTTLE, SCREW CAPThe contract calls for the procurement of a single unit of a cylindrical 4 oz (120 ml) screw cap bottle made of clear blueish-pink tinted polyvinylidene chloride (PVC), identified by NSN 6640-00-500-0276 and MILIPORE part number XX65-047-09, with no substitutions permitted. The item is not regulated by the FDA and is intended for medical use aboard the USS Dwight D. Eisenhower, with delivery required at FPO AE 09532 within 20 days of release, on a FOB destination basis. All packaging must be commercial and conform to DLA Packaging Requirements for Procurement (RP001), including sealed unit containers that prevent damage, and commercial exterior shipping containers suitable for safe carrier transport at the lowest possible rate. Packaging must comply with ASTM D3951 for non-hazardous materials, unless overridden by the DLA Master List of Technical and Quality Requirements, and for hazardous materials as defined by FED-STD-313, specific TQ requirement IP025 applies. Marking and labeling must strictly follow Medical Marking Standard No. 1 (MMS No. 1), which supersedes MIL-STD-129 for medical items, and palletization must adhere to RP001 guidelines. The item must be shipped via the fastest traceable means, excluding parcel post, and shipment information must reference RDD 777 and the designated transport control number. Inspection and acceptance occur at destination per FAR 52.246-2, with the government responsible for final evaluation. The contract value is $1.000 for one unit, with zero variance allowed in quantity. Special requirements include compliance with FAR and DFARS clauses on equal opportunity, combating human trafficking, employment verification, sustainable products, hazardous material safety, safeguarding information systems, and export control. The contractor must also adhere to payment instructions through Wide Area WorkFlow, electronic submission of invoices, and avoid unauthorized obligations. Representations regarding small business status, UEI, CAGE code, and compliance with sanctions on Communist Chinese military companies are required. All technical and quality references are governed by the DLA Master List, and no other substitutes or modifications are authorized.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
TEST PAPER AND COLOThe contract pertains to the procurement of TEST PAPER AND COLOR CHART, PH, STRIP, designed to indicate color density changes with results available within one minute, supplied in units of each. The item is identified by NSN 6640-01-632-1192 with a quantity of six units required under purchase request 7017544737. Delivery must be completed within 20 days of award. The solicitation, numbered SPE2DH-26-T-5323, was posted on July 20, 2026, with responses due by July 27, 2026, and is classified under NAICS code 423450. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. The contract is managed by the Medical Supply Chain FSH under the Department of Defense, with Tina Vu as the primary point of contact, reachable via email and phone. Performance is to occur at FPO with ZIP 09517-3310.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
SLED
FY27 Wheelchair Parts and Accessories for RichmondThe Texas Health and Human Services Commission is soliciting bids to establish a blanket purchase order for wheelchair parts and accessories to support maintenance at the Richmond State Supported Living Center, with the contract covering the period from September 1, 2026, through August 31, 2027. The solicitation, numbered HHS0017588, has a response deadline of August 3, 2026, and the total contract value is capped at $40,000 for the term, though no base pricing is provided in the solicitation. Vendors must supply manufacturer-specified components compatible with existing wheelchair models such as Invacare, Quickie, Helio, and Tillite, and are required to provide on-site technician services for removal and installation. All items must meet exact bid specifications, with no substitutions allowed without prior written approval, and deliveries must be made in full, on time, and without split shipments unless explicitly requested. Packaging and labeling requirements include clear identification of contents, agency purchase order number, quantity per carton, and shrink-wrapped, labeled pallets. Evaluation of proposals is based on three primary factors in descending order of importance: compliance with technical and contractual specifications, the bidder’s demonstrated ability to perform—which includes past performance via the Vendor Performance Tracking System (VPTS) with a minimum grade of “C”—and price, which is assessed for competitiveness but is not the sole determining factor. The award will be based on best value, not lowest price technically acceptable, allowing HHSC to select a higher-priced bid if it delivers superior overall value. Bidders must certify compliance with Texas-specific socioeconomic preferences, including Texas-owned businesses, Texas-made products, energy-efficient goods, and recycled materials, and must submit a valid Unique Entity Identifier from SAM.gov. Contractors must adhere to strict access and audit rights allowing state and federal officials to review all records, and must comply with the Texas Public Information Act, ensuring all contract-related information is publicly accessible unless legally exempt. Subcontracting and assignment require prior written approval, and payment is governed by the Texas Prompt Payment Act, with invoicing and remittance procedures to be detailed post-award. All proposals must be submitted via the HHS Online Bid Room or email to pcsbids@hhs.texas.gov, with file formats restricted to PDF, Word, or Excel, and must not exceed 25 MB.
Health and Human Services Commission

POSTED

about 23 hours ago

DEADLINE

in 13 days
View Details
NAICS: 423450
New
DIBBS
Medical Device Distribution and Logistics ServicesThe contract encompasses the warehousing, order fulfillment, and FOB Destination shipping of medical devices to Belle Chasse, Louisiana, with strict adherence to Department of Defense Logistics Agency packaging standards and hazardous materials regulations. All operations must ensure the safe, compliant handling and transport of sensitive medical equipment, maintaining full regulatory alignment throughout the supply chain. The performance location is fixed at the specified zip code in Belle Chasse, and the services are structured as a subcontract under the NAICS code 423450, indicating a focus on wholesale trade of medical and surgical equipment. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, and is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF. The contract requires precise execution of logistics functions including inventory control, order accuracy, and final delivery under FOB Destination terms, placing responsibility for shipping costs and risk on the contractor until goods reach the designated location. Compliance with DLA packaging protocols and hazardous materials standards is non-negotiable, demanding certified processes, documentation, and trained personnel to manage regulated medical items securely and efficiently.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
COVER, STERILITY MAINTEThe contract solicitation SPE2DH-26-T-5295 seeks the supply of 16 x 22-inch polyethylene self-seal covers for sterility maintenance, with a unit of issue of 250 covers per package. Only one package is required, priced at $88.58, with delivery due within 20 days after order placement to FPO AE 09566-4008, designated for the USNS COMFORT T AH 20 medical facility. The item is classified under NSN 6530-01-278-9412 and falls under NAICS code 423450, with procurement conducted under simplified acquisition procedures using a firm fixed-price contract type. Compliance with DLA’s Packaging Requirements for Procurement (RP001) and Technical and Quality Requirements referenced in the DLA Master List is mandatory, and all packaging must adhere to MIL-STD-2073-1E, while marking must conform to Medical Marking Standard No. 1 (MMS NO. 1), superseding MIL-STD-129 for all medical items. Hazardous materials must be labeled in accordance with 29 CFR 1910.1200, and contractors must submit sample labels for approval if using alternative regulatory standards. The contract incorporates multiple FAR and DFARS clauses related to small business representation, employment equity, trafficking in persons, cybersecurity, and government property, with Alternate I versions applied to several clauses including Type of Contract and Postaward Small Business Program Representation. Invoicing must be submitted electronically through Wide Area WorkFlow, and payment processing will be handled via the DoDAAC system. Offerors must hold a valid UEI and CAGE code, and are required to disclose information related to covered defense telecommunications equipment, if applicable. Delivery is FOB destination, with inspection and acceptance performed by the Government at the delivery point. The solicitation closed for responses on July 27, 2026, and was issued through the DLA BSM DIBBS portal, requiring all proposals to be submitted electronically via DIBBS, WAWF, EDI, or FTP. No evaluation factors or award criteria were disclosed, indicating an LPTA approach is likely.
MEDICAL SUPPLY CHAIIN FSH

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 484220
New
DIBBS
Logistics and Delivery CoordinationThis contract requires precise coordination of time-sensitive FOB Destination deliveries for hazardous material shipments, with all deliveries required to be completed within 20 days of award. Compliance with Department of Defense standards is mandatory, including adherence to all regulatory documentation and real-time tracking protocols for hazardous cargo. The work falls under NAICS code 484220 and is categorized as a subcontract within the Medical Supply Chain FSH organization under the Department of Defense. Performance is designated to take place at FPO with ZIP code 09588, indicating operations may involve overseas or military post locations. Responses must be submitted by the deadline of July 27, 2026, following the solicitation posted on July 20, 2026, with no set-aside designation specified, leaving eligibility open to qualified bidders regardless of business size or certification status.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract seeks providers to deliver regulatory compliance services specifically tailored to hazardous materials labeling, safety data sheet preparation, and MIL-STD-129 marking for military shipments. These services are critical to ensuring adherence to federal and Department of Defense standards for the safe handling, transport, and identification of hazardous substances within the military supply chain. The contractor will be responsible for accurately documenting and marking hazardous materials to meet mandated regulatory requirements and to support seamless logistics operations across Department of Defense channels. The work is categorized under NAICS code 541690 and is structured as a subcontract with a response deadline of July 27, 2026. Performance is required at FPO, ZIP 09588, which indicates delivery to military postal addresses typically used for overseas or expeditionary locations. The solicitation originated from the Medical Supply Chain FSH under the Department of Defense, emphasizing the importance of precision and compliance in medical and logistical contexts involving hazardous material shipments. All deliverables must align with current Department of Defense and federal transportation regulations to avoid operational delays or safety violations.
Other Scientific and Technical Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334510
New
DIBBS
Supply of CO₂ Gas Analyzer Measuring TubesThe contract requires the manufacture and supply of 14,000 packages of glass measuring tubes specifically designed for use in CO₂ gas analyzers with a measurement range of 100 to 3000 parts per million. Each tube must feature melted tips to ensure precision and safety during use, and all items must strictly comply with the National Stock Number NSN 6630121893126 and the military packaging standard MIL-STD-129 to ensure uniformity, traceability, and durability in defense logistics. The products are intended for military medical applications and must meet exacting technical and packaging specifications to support reliable operation in field and facility environments. The solicitation, posted on July 20, 2026, with a response deadline of July 27, 2026, is structured as a subcontract under the NAICS code 334510, which classifies it within the Instrument and Laboratory Equipment Manufacturing sector. The contracting activity is managed by the Department of Defense through the Medical Supply Chain FSH, with performance required to be delivered to FPO, ZIP 09588. Although no specific point of contact is listed, the official solicitation can be accessed via the DIBBS portal, indicating this is part of a broader defense procurement process intended to maintain and resupply critical analytical equipment for medical monitoring systems.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Supplier of Physical Therapy Exercise Bands (Medium Resistance, Green Latex, 9in x 2in)
Surgical Appliance and Supplies Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331492
New
DIBBS
Supplier of Nickel-Titanium Alloy for Medical DevicesThe contract seeks a supplier capable of providing medical-grade nickel-titanium (NiTi) alloy specifically for the manufacture of endodontic rotary files, with stringent requirements for full traceability throughout the material’s production lifecycle and mandatory biocompatibility certification to ensure safety for human use. The alloy must meet exacting medical standards to support precision dental instruments used in root canal procedures, with all documentation and quality controls verified and maintained to comply with regulatory expectations for implantable medical devices. The material must be consistently produced under certified processes to guarantee mechanical properties, shape memory characteristics, and corrosion resistance critical to the performance and reliability of the final product. This is a subcontract opportunity posted under the Department of Defense’s Medical Supply Chain FSH, with a response deadline of July 27, 2026, and a NAICS code of 331492 indicating classification under other fabricated metal product manufacturing. The place of performance is designated as FPO, ZIP 96672-4090, indicating potential delivery to military medical facilities or defense-contracted manufacturers. Although no point of contact or set-aside details are provided, the solicitation number SPE2DH26T5305 and public DIBBS portal link confirm the formal procurement process, requiring bidders to submit proposals that fully address documentation, compliance, and supply chain integrity to qualify for award.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling, and Logistics Support for Medical ShipmentsThe contract requires the provision of DoD-compliant packaging, labeling, and logistics services for medical supplies destined for naval hospital ships, ensuring full adherence to MIL-STD-2073-1E and DLA RP001 standards. All packaging and labeling procedures must meet stringent military specifications for durability, traceability, and environmental resilience to support operational readiness in maritime environments. The services encompass end-to-end logistics management, including inbound receipt, storage, consolidation, outbound preparation, and shipment coordination to a FPO address with ZIP code 96672-4090, with performance centered on maintaining the integrity and timely delivery of critical medical assets. This is a subcontract under the Department of Defense, classified under NAICS code 493190, and was posted on July 20, 2026, with a response deadline of July 27, 2026. The contract is managed by the Medical Supply Chain FSH office and targets vendors capable of supporting the unique demands of naval medical logistics, including strict compliance with federal defense regulations and the ability to operate within the constraints of maritime deployment timelines and conditions. No set-aside designation is specified, and the point of contact details are not provided, with all submissions and inquiries directed through the designated DIBBS platform link.
Other Warehousing and Storage

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
Supply of Endodontic Rotary Files (Protaper Gold Rotary Finishing Files)The contract solicits the manufacture and supply of FDA-compliant endodontic rotary finishing files constructed from nickel-titanium alloy, specifically Protaper Gold Rotary Finishing Files, for use in root canal treatments aboard U.S. military hospital ships. These instruments must meet stringent medical device regulations and be suitable for high-precision dental procedures in a deployed maritime environment, ensuring reliable performance under field conditions. The deliverables are intended to support the dental care mission of the Department of Defense, with performance required at the FPO address 96672-4090, indicating shipment to naval vessels operating in the Pacific region. This is a subcontract opportunity under NAICS code 339112, which classifies it within the medical equipment and supplies manufacturing sector, and is being managed by the Medical Supply Chain FSH under the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, leaving a limited seven-day window for qualified manufacturers to submit proposals. Bidders must ensure compliance with FDA standards, military specifications for medical devices, and the logistical requirements of delivering sensitive dental instruments to remote, mobile medical facilities. While no set-aside provisions are indicated, participation is open to all eligible subcontractors capable of meeting the technical, regulatory, and delivery timelines.
Surgical and Medical Instrument Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 488999
New
DIBBS
FOB Destination Delivery and LogisticsThe contract requires end-to-end logistics and delivery services to APO AE 09227-0000 in Kaiserslautern, Germany, under FOB Destination terms, meaning the vendor assumes full responsibility for transportation, customs, and delivery costs until the goods reach the final destination. The delivery must be completed in compliance with all international shipping regulations and military receipt protocols, with ownership and risk transferring only upon arrival at the assigned APO address. The NAICS code 488999 indicates this is a specialized logistics support service outside standard freight categories, likely involving secure, tracked, and time-sensitive transport for Department of Defense medical supply needs. This subcontract is issued by the Medical Supply Chain FSH under the Department of Defense and was posted on July 20, 2026, with a response deadline of July 27, 2026. The place of performance is strictly defined as the APO box address, requiring precise alignment with U.S. military postal guidelines for overseas delivery. No specific set-aside provisions are listed, and the procuring office information is incomplete, but the solicitation number SPE2DH26T5299 and official DIBBS platform link confirm its legitimacy within federal contracting systems. Vendors must ensure complete compliance with all military logistics standards, including documentation, tracking, and delivery confirmation, as failure to meet FOB Destination requirements may result in rejection or financial liability.
All Other Support Activities for Transportation

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Controlled Unclassified Information (CUI)The contract requires implementation of NIST SP 800-171 safeguards to protect Controlled Unclassified Information (CUI) and the ongoing maintenance of cyber incident reporting capabilities as mandated by DFARS 252.204-7012. This subcontract is focused on ensuring that all systems and processes handling CUI meet federal cybersecurity standards, including the deployment of technical, administrative, and physical controls to prevent unauthorized access, disclosure, or alteration of sensitive information. Continuous compliance is expected, with immediate reporting of any cyber incidents affecting CUI in accordance with federal requirements. The solicitation is issued under the NAICS code 541512 for Computer Systems Design Services and is tied to the Department of Defense through the Medical Supply Chain FSH. Performance is to be conducted at APO, ZIP 09227-0000, indicating potential deployment in a military or overseas operational environment. The response deadline is set for July 27, 2026, with the posting date of July 20, 2026, indicating a tight seven-day window for submission. The contract is structured as a subcontract, emphasizing its role within a broader defense or federal supply chain framework, and all participating entities must be prepared to demonstrate rigorous adherence to CUI protection protocols and incident response protocols without exception.
Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Handling and DocumentationThe contract requires strict adherence to OSHA’s Hazard Communication Standard for all hazardous materials involved in cabinet production or preservation processes, ensuring proper labeling, safety data sheets, and employee training are maintained throughout operations. The work is classified as a subcontract under NAICS code 541620 and is managed by the Department of Defense through its Medical Supply Chain FSH entity, with the place of performance located at APO 09227-0000. All activities must comply with federal safety regulations concerning the identification, handling, and documentation of hazardous substances to protect worker health and ensure regulatory compliance. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, indicating a tight turnaround for submissions. There is no set-aside designation specified, and the contract does not include a point of contact, suggesting potential reliance on the DIBBS portal for correspondence. Contractors are expected to demonstrate robust systems for managing hazardous material documentation and safety protocols as part of their proposal, with full compliance mandatory for contract execution. The work is tied to military medical supply logistics, implying that any noncompliance could impact broader defense operations.
Environmental Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339999
New
DIBBS
Medical Item Labeling and Marking ComplianceThis contract requires compliance with Medical Marking Standard No. 1 for the labeling and marking of durable medical items, effectively replacing the outdated MIL-STD-129 standard for all medical-related applications. The work involves applying precise, durable markings to ensure accurate identification, tracking, and inventory management within the military medical supply chain, adhering strictly to the new standard’s technical and logistical requirements. All subcontractors must ensure their marking processes meet the specified durability, legibility, and format criteria to support seamless integration into existing defense medical logistics systems. The contract is issued under NAICS code 339999 for other miscellaneous manufacturing and is classified as a subcontract within the Department of Defense’s Medical Supply Chain FSH framework. Responses are due by July 27, 2026, with a posted date of July 20, 2026, indicating a tight seven-day window for submission. Performance is expected to occur at APO 09227-0000, underscoring the global nature of the supply chain and the need for consistent marking standards across forward-deployed and expeditionary medical environments. Participation requires full understanding and implementation of the new standard without reliance on legacy military specifications.
All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging and Preservation ServicesThe contract requires the provision of packaging and preservation services for narcotic control cabinets in strict compliance with MIL-STD-2073-1E standards to ensure resilience and functionality throughout military logistics operations. The work must safeguard sensitive medical equipment against environmental degradation, physical damage, and contamination during transport and storage, meeting the rigorous durability requirements mandated by the Department of Defense. The packaging must preserve the operational integrity of the cabinets and support long-term storage under varied climatic and logistical conditions typical of military supply chains. This subcontract is issued under the NAICS code 561910 and is designated for performance at APO 09227-0000, reflecting its alignment with deployment-focused logistics networks. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The procurement is managed by the Medical Supply Chain FSH under the Department of Defense, emphasizing the critical nature of the packaged items in maintaining secure, controlled medical protocols in operational environments. All subcontractors must demonstrate proven expertise in military-grade packaging systems and full adherence to federal preservation standards without deviation.
Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details