Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SWITCH, PUSH

Active
SPE7M8-26-T-5396Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a single push switch with NSN 5930-01-311-7287 under solicitation SPE7M8-26-T-5396, requiring delivery within 20 days of award. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date depending on acquisition size, and any amendments superseding prior versions. The use of Class I ozone-depleting substances is strictly prohibited in design, manufacturing, or cleaning processes unless explicitly approved in writing by the contracting officer, and this prohibition supersedes any conflicting specification but does not reduce performance expectations. Mercury or mercury-containing compounds are banned from direct contact with the hardware except for functional applications in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per SPE7M8-26-T-5396 and NAVSEA 5100-003D. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Technical data referenced is incomplete, requiring the supplier to ensure full compliance with both cited specifications and the part-numbered item. The solicitation requires complete data packages for both approved and alternate parts, with no existing data provided, and the primary point of contact is Dondiego Boler at the Department of Defense’s Electrical Devices Division.

General Info

Procure single push switch NSN 5930-01-311-7287, deliver in 20 days, zero defects, no mercury or ozone toxins, comply with MIL-STD-1916.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

UNIT 100145 BOX 1, FPO, AP, 96675, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M8-26-T-5396 for Electrical Devices

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ELECTRICAL DEVICES DIV
View Agency Profile
Office AddressUS
Contacts
Dondiego Boler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWITCH,PUSH
SWITCH,PUSH
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS
NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST
MEET THE REQUIREMENTS OF THE CITED TECHNICAL
DATA IN ADDITION TO THE REQUIREMENTS OF THE
PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
SPE7M8-26-T-5396
SECTION B
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5930-01-311-7287 Quantity: 1 EA Purchase Request: 7017473237QTY: 1 Delivery: 20 days ADO

Similar Contracts

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIALThe contract is for a special-purpose electrical cable assembly with part number 180.01.0054 and NSN 6150-12-324-0183, with a quantity of five units to be delivered FOB origin within 171 days, targeting a delivery date of July 1, 2027. The product must comply with stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede all other standards such as ASTM D3951, and packaging must follow MIL-STD-129 and RP001 DLA packaging guidelines, including palletization per specified protocols. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the contract is subject to Covered Defense Information protocols under RD002. Inspection and acceptance occur at the destination, with zero non-conformances required in sampling per MIL-STD-1916 or equivalent zero-based plans, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. The contract was issued under solicitation SPE4A6-26-T-06FS as a total small business set-aside under NAICS code 334419, with a response deadline of July 22, 2026, and was posted on July 14, 2026. Delivery is to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, using the designated parcel post and freight addresses, with no variance allowed in quantity. The unit of issue is each, with a total price based on a per-unit price specified in the contract line item. All items must be marked and labeled in accordance with military standards, and the manufacturer must adhere to DLA’s unit of issue guidelines referenced in the official DLA documentation. The point of contact for the contract is Chinh Le of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BUS, CONDUCTORThe contract is for the procurement of a BUS CONDUCTOR with NSN 6150015282988 and part number 10371-005, under solicitation SPE4A6-26-T-06DT. The requirement specifies the delivery of 13 units at $13.00 each, with total price of $169.00, delivered FOB origin within 171 days from the required delivery date of April 20, 2027, and must arrive no later than January 10, 2027. Packaging must strictly comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, with marking adhering to MIL-STD-129 and no special marking required. Palletization follows DLA’s RP001 packaging requirements, and the delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania. Compliance with technical and quality standards is mandated through incorporation of the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. Sampling for inspection must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major unless otherwise stated. Acceptance criteria require zero non-conformances unless contract terms otherwise allow. All items must be physically identified per RQ017, and government identification must be removed from non-accepted supplies. Transportation and shipping details are governed by DLAD Proc Notes C19 and C20, and the unit of issue aligns with ANSI X12 standards as defined by DLA. The contract is administered by the Department of Defense’s ASC Commodities Division, with Bradley Willis as the point of contact.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIALThis contract pertains to a special-purpose electrical cable assembly identified by NSN 6150-01-411-5088, with a quantity of two units required for delivery within 261 days after order. The technical data associated with this item is subject to strict export control under either ITAR or EAR, meaning any transfer, including disclosure to foreign nationals within the United States, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program status, verified completion of mandatory DOD export control training, and formal approval from DLA are permitted access. The solicitation, issued under number SPE4A6-26-T-05YC by the Department of Defense’s ASC Commodity Division, was posted on July 14, 2026, with responses due by July 22, 2026. Performance is mandated at New Cumberland, Pennsylvania, 17070-5002, and the primary point of contact for inquiries is Bradley Willis from DLA, reachable via email and phone provided. The NAICS code 334419 reflects the industry classification for other electrical equipment and component manufacturing.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECThis contract pertains to a special-purpose electrical cable assembly identified by part number 124768-101 and NSN 5995014358882, with a total quantity of two units to be delivered under solicitation SPE4A6-26-T-06AV. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Compliance with CMMC Level 2 Cybersecurity Self-Assessment is mandatory, and the product must adhere to strict packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. All materials are prohibited from containing intentionally added mercury or mercury compounds, except for approved exceptions such as functional uses in batteries, lighting, sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Delivery is required FOB origin within 171 days of contract award, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The item must be palletized in accordance with DLA packaging requirements and shipped to the designated receiving address in Tracy, California. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed in sampled lots unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. The contract requires adherence to DoD unit of issue standards and includes specific transportation guidelines referenced in DLAD Proc Notes C19 and C20. The primary point of contact for inquiries is Thanh Hue Nguyen, and the solicitation was issued on July 14, 2026, with a response deadline of July 22, 2026. The original delivery date has been adjusted, and the required ship date is set for January 10, 2027, with the original delivery target being March 18, 2027.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIALThis contract is for the procurement of two special-purpose electrical cable assemblies identified by NSN 6150-01-265-0887, with a delivery requirement of 171 days after contract award. The solicitation number is SPE4A6-26-T-05ZM and is designated as a total small business set-aside under FAR 19.5, with a NAICS code of 334419. The contract incorporates mandatory technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and requires compliance with DLA packaging standards. Quality assurance is governed by MIL-STD-1916 or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major and acceptance requires zero non-conformances unless otherwise stated. Inspection and acceptance must occur at the manufacturer’s origin under RQ009, and the supplier must comply with ISO 9001:2015 quality management requirements regardless of manufacturing status. The technical data associated with this cable assembly is subject to export control under either ITAR or EAR, restricting any disclosure to foreign persons, including employees of U.S. companies or their foreign subsidiaries, within or outside the United States. DFARS 252.225-7048 applies, and access to controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and official DLA authorization. The Defense Logistics Agency further mandates the removal of government identification from non-accepted supplies and imposes strict handling protocols to prevent unauthorized dissemination. The contract is managed by the ASC Commodities Division under the Department of Defense, with performance location at Hill AFB, Utah, and primary point of contact Traci Beaudoin at traci.beaudoin@dla.mil. The solicitation was posted on July 14, 2026, with responses due by July 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details