Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SWITCH, ROTARY

Active
SPE7M8-26-T-5698Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a rotary switch with NSN 5930-01-236-0272, quantity one unit, under purchase request 7017726926, with a delivery requirement of 20 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The alternate offeror must submit a complete data package that includes detailed information for both the approved and alternate parts. The solicitation number is SPE7M8-26-T-5698, issued on August 4, 2026, with responses due by August 17, 2026. The contract is classified under NAICS code 334419 and is administered by the Electrical Devices Division of the Department of Defense. Performance will occur at Holloman AFB, ZIP 88330-7706, with Dondiego Boler listed as the primary point of contact, reachable via email and phone. No government identification removal requirements are applicable due to lack of available data.

General Info

Procure one rotary switch NSN 5930-01-236-0272, delivery in 20 days, solicitation SPE7M8-26-T-5698, Holloman AFB.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

260 DELAWARE AVE BLDG 311, HOLLOMAN AFB, NM, 88330-7706, US

Set-Aside

NONE

Documents

(1)

SPE7M8-26-T-5698.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ELECTRICAL DEVICES DIV
View Agency Profile
Office AddressUS
Contacts
Dondiego Boler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWITCH,ROTARY
SWITCH,ROTARY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5930-01-236-0272 Quantity: 1 EA Purchase Request: 7017726926QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7L4-26-T-5973
The contract specifies a single unit of a special-purpose electrical cable assembly with NSN 5995-01-623-4267, requiring delivery within five days FOB origin, with no tolerance for quantity variance. The item must meet stringent technical and quality standards defined by the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements, including palletization per RP001, and all markings must adhere to established military protocols. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or equivalent zero-based plans, enforcing zero non-conformances unless otherwise contracted. The cable assembly is subject to Cybersecurity Maturity Model Certification Level 2 self-assessment, and government identification must be removed from any non-accepted supplies. The delivery address is Holloman Air Force Base, and shipment must use traceable freight methods—parcel post is prohibited. The contract was issued under solicitation SPE7L4-26-T-5973 with an original required delivery date of August 3, 2026, and is managed by the Department of Defense’s Combat Vehicles and Armament office, with Anna-Rachelle Betts as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-11YL
The contract is for a special-purpose electrical cable assembly with NSN 6150-01-496-9541, in a quantity of 26 units, under solicitation SPE4A6-26-T-11YL, issued by the ASC Commodities Division of the Department of Defense. The procurement is a total small business set-aside, with responses due by August 12, 2026, and delivery required 291 days after order. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and explicit DLA authorization may access the controlled data. The place of performance is New Cumberland, PA, 17070-5002, and the primary point of contact is Jessica Fuentes-OSSIO, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-12CF
The contract pertains to the procurement of four cable assemblies under solicitation SPE4A6-26-T-12CF, with a specific NSN 5995-01-610-0427 and a delivery deadline of 171 days after award. The item is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with verification levels and sampling protocols governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with corresponding AQLs of 0.1, 1.0, and 4.0. The contractor must comply with DLA packaging standards, ensure physical identification and bare item marking, and remove government identification from non-accepted supplies. The technical data associated with this cable assembly is controlled under ITAR or EAR, restricting export and disclosure to foreign persons without prior authorization, and access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The contract also enforces CMMC Level 2 certification for any third-party assessor and applies covered defense information protocols, with all requirements binding under the version of the DLA Master List effective on the solicitation issue date. The point of contact for inquiries is Kory Walker of the Department of Defense’s ASC Commodities Division, and performance is required at New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-12AC
This contract is for the procurement of 11 special-purpose electrical cable assemblies, designated by NSN 6150-01-469-9741, under solicitation SPE4A6-26-T-12AC. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed, transferred, or exported to foreign persons or entities without prior authorization from the Department of State or the Department of Commerce. This restriction applies universally, including to foreign nationals within the United States and to foreign subsidiaries of U.S. companies. Access to this controlled technical data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been officially approved by DLA. The Defense Logistics Agency enforces these requirements through DFARS 252.225-7048 and mandates adherence to its packaging and data handling standards. The delivery must be completed within 171 days after contract award, and the place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract is managed by the ASC Commodities Division of the Department of Defense, with Jessica Fuentes-Ossio listed as the primary point of contact. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS code 334419 for other electrical equipment and component manufacturing.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-T-12JH
The contract pertains to the procurement of a wiring harness identified by part number PE20777 and NSN 6150991855341, with a total quantity of two units to be delivered FOB origin. Delivery is required within 171 days of contract award, with the original required delivery date set for March 16, 2027, and a needed ship date of January 31, 2027. All items must comply with DLA packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Packaging must be palletized according to DLA procurement guidelines, and the delivery destination is clearly specified as the DLA Distribution San Joaquin warehouse in Tracy, California. Quality verification follows zero-defect sampling protocols consistent with MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major unless otherwise defined. Inspection and acceptance occur at the destination point, with no variance allowed in quantity. The contract is issued under solicitation SPE4A6-26-T-12JH, and technical and quality requirements referenced through R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements. The unit of issue is each, at a price of $2.00 per unit, for a total contract value of $4.00. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under the NAICS code 334419, managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADIO F
Solicitation # SPE4A6-26-T-12JY
The contract specifies the procurement of a radio frequency cable assembly under solicitation SPE4A6-26-T-12JY, with a quantity of 16 units, each identified by NSN 5995-01-301-8654, to be delivered in 285 days to Robins Air Force Base, Georgia. The item is designated as a critical application item with approved suppliers including TE Connectivity Corporation, FrontGrade Technologies Inc., and DCX-Chol Enterprises, Inc., each using specific part numbers. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and must be complied with in full. Packaging and labeling must follow MIL-STD-129 and DLA Packaging Requirements, with palletization adhering to RP001, while cybersecurity compliance mandates a CMMC Level 2 self-assessment. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling protocols based on MIL-STD-1916 or comparable zero-based plans. All government identification must be removed from non-accepted supplies, and physical markings must be applied per RQ017. Delivery is FOB origin with no variance allowed in quantity, and the required ship date is May 25, 2027. The unit of issue is each, and transportation logistics adhere to DLAD Proc Notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-T-12CU
The contract pertains to the procurement of eight wiring harnesses with NSN 6150-01-568-9945 under solicitation SPE4A6-26-T-12CU, issued by the Defense Logistics Agency’s ASC Commodities Division. Deliveries are due within 171 days of award, and all supplies must comply with stringent quality, security, and export control requirements. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2, requiring third-party assessment organization certification, and is governed by technical and quality requirements from the DLA Master List, including physical identification and bare item marking standards. No surplus material is acceptable, and government identification must be removed from rejected items. Components must originate from qualified manufacturers or products listed on official QPLs or QMLs as specified in procurement note H02. Technical data associated with the item is controlled under either ITAR or EAR regulations, and its export or disclosure to foreign persons—even within the U.S.—is strictly prohibited without prior authorization from the Department of State or Commerce, with DFARS 252.225-7048 applying. Only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and received DLA approval, may access the controlled technical data. The place of performance is Anniston, Alabama, and the point of contact is Berkeley Vaughan.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BUS, CONDUCTOR
Solicitation # SPE4A6-26-T-11XL
The contract pertains to the procurement of five BUS, CONDUCTOR units with NSN 6150-01-444-8038 under solicitation SPE4A6-26-T-11XL, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days of award, with performance to take place in Tracy, California, 95304-5000. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which incorporates referenced technical and quality standards identified by R or I numbers. Removal of government identification from non-accepted items and physical marking of bare items are mandatory per RQ011 and RQ017. Sampling and inspection procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0, with unspecified attributes treated as major. Zero non-conformances are required in sampled lots unless otherwise stated, and manufacturers may elect attribute or variable inspection under MIL-STD-1916 unless directed otherwise by the contract. The solicitation opened on August 4, 2026, with responses due by August 12, 2026, and the primary point of contact is Berkeley Vaughan, reachable via email and phone listed in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATOR
Solicitation # SPE4A6-26-T-11QX
The contract pertains to the procurement of two Indicator Light Assemblies with NSN/Part Number 6210-00-551-3748, under solicitation SPE4A6-26-T-11QX, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days of award, and the response deadline for submissions is August 12, 2026. The technical specifications and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating referenced standards such as ISO 9001:2015 for quality management, along with specific protocols for inspection at origin, measuring and test equipment compliance, and removal of government identification from non-accepted items. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and only U.S. contractors with approved JCP certification, completed DLA training, and formal authorization may access such data. DFARS 252.225-7048 applies to the handling of this controlled information, and additional requirements address covered defense information under RD002. The place of performance is Tracy, California, with Shenika Thompson as the primary point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M9-26-Q-0036
The contract is for seven units of a hose assembly, nonme, identified by NSN 4720-01-649-7970, under solicitation SPE7M9-26-Q-0036, which is a total small business set-aside for NAICS code 326220. The pricing is firm fixed price with zero variance allowed in quantity, and delivery is required 106 days after the award date to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, with all supplies subject to packaging requirements per MIL-STD-2073-1E and DLA standards, including specific marking per MIL-STD-129 and no special markings. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. The item must be delivered in accordance with DLA Procurement Notes C19 and C20 regarding transportation and freight, and the packaging must adhere to prescribed materials, cushioning, containment, and palletization standards. The Government point of contact is Jennifer Hopkins, and the purchase request number is 7005352642 with a required ship date of May 30, 2024.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334418
New
DIBBS
SWITCH SUBASSEMBLY
Solicitation # SPE7M8-26-T-5700
The contract specifies the procurement of a switch subassembly identified by NSN 5930-01-448-7706 and part number 10250T5J63-1, with a total quantity of four units—three units under purchase request 7017720056 and one unit under 7017720057—each priced at $1.00, totaling $4.00. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and the original required delivery date is August 4, 2026. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit container type D3, and packing code U, with all marking conforming to MIL-STD-129 and no special marking required. The item must not contain intentional additions of mercury or mercury compounds, except for permitted functional uses in batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA, and any portable mercury-containing devices must have shockproof construction and a secondary containment boundary as per NAVSEA 5100-003D. Shipment must be sent to the parcel post address for USS OSCAR AUSTIN DDG 79 at FPO AE 09581, with vessel or freight transport governed by DLAD procedures C19 and C20. The contract is issued under solicitation SPE7M8-26-T-5700 by the Department of Defense’s Electrical Devices Division, with Dondiego Boler as the point of contact, and is classified under NAICS code 334418. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation issue date.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
ELECTRON TUBE
Solicitation # SPE7M8-26-T-5702
The contract pertains to the procurement of a single electron tube, cathode ray module with NSN 5960-01-170-9886, issued under solicitation SPE7M8-26-T-5702 by the Department of Defense’s Electrical Devices Division. The item is subject to strict export control regulations under either ITAR or EAR, meaning any transfer of associated technical data to foreign persons—even within the United States—requires prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA. DFARS 252.225-7048 governs the handling of this technical data, and the requirement extends to all U.S. companies and their foreign subsidiaries. Delivery is scheduled for 378 days after order, with the place of performance located at New Cumberland, PA, 17070-5002. The solicitation closed on August 17, 2026, and is managed by Rickie Allen, reachable at rickie.allen@dla.mil or 614-693-4328.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-5701
The contract pertains to the procurement of a SWITCH, TOGGLE with NSN 5930-01-691-9749 and part number 6FH 004 570-131, supplied by HELLA INC DBA 1CW22, in a quantity of two units. Delivery is required within ten days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The units must be packaged per DLA-specific standards, prioritizing the DLA Master List of Technical and Quality Requirements over general commercial standards like ASTM D3951; if hazardous under FED-STD-313, packaging must comply with TQ requirement IP025, otherwise adherence to MIL-STD-129 for marking and labeling is mandatory. Palletization must follow RP001 guidelines, and the use of Class I ozone-depleting substances in any phase of manufacture or processing is strictly prohibited without explicit written approval from the contracting officer, though exceptions apply to commercial items as defined in FAR 11.001 or part-numbered-only items. Shipping must utilize traceable freight methods—parcel post is forbidden—and must be directed to the designated distribution management office at Camp Lejeune, NC, with the RDD code E and project identifier TP 2. The required delivery date is July 31, 2026, with a solicitation response deadline of August 17, 2026, issued under solicitation SPE7M8-26-T-5701 by the Department of Defense’s Electrical Devices Division.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-5699
The contract pertains to the procurement of a single unit of a switch and toggle component identified by part number 6FH 004 570-571 and NSN 5930-01-691-9745, with a required delivery within ten days of award. The item must be delivered FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply strictly with DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the item is hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All packaging must also adhere to RP001 DLA packaging standards, with unit of issue and quantity per unit pack as specified. Shipments must be sent via traceable freight to the specified destination at Camp Lejeune, North Carolina, using the freight shipping address, and parcel post is strictly prohibited. The purchase request number is 7017726966, with an original required delivery date of July 31, 2026, and the contract was issued under solicitation SPE7M8-26-T-5699 under the NAICS code 335313. The point of contact is Dondiego Boler, and the contract requires compliance with all applicable DoD and DLA technical specifications, which supersede any general commercial standards.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
New
DIBBS
Unable to Decompose Subcontract OpportunitiesA system outage caused a 504 gateway timeout, preventing access to the prime contract details and making it impossible to decompose the contract into subcontract opportunities. As a result, no specific scope, requirements, or subcontracting parameters can be identified at this time. The solicitation is listed under the title “Unable to Decompose Subcontract Opportunities,” with a posted date of August 3, 2026, and a response deadline of August 14, 2026. It is classified as a subcontract opportunity under the Department of Defense’s Electrical Devices Division, with a place of performance in Joint Base McGuire-Dix-Lakehurst, New Jersey, zip code 08641-5500. No solicitation number, NAICS code, set-aside information, organizational type, or point of contact is available due to the system failure. The official record can be accessed via the provided DIBBS link.

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334518
New
DIBBS
Supply of Flow Switch (NSN: 5930-00-928-5376)The contract requires the supply of 52 units of a military-specification flow switch identified by National Stock Number 5930-00-928-5376, manufactured to meet Sikorsky drawing 65450-01040-101 and compatible with designated part numbers. The item is intended for use in defense applications and must adhere to strict military standards for performance and reliability. The solicitation was posted on August 3, 2026, with responses due by August 18, 2026, and is classified as a subcontract under the NAICS code 334518 for other electrical equipment and component manufacturing. The contract is administered by the Electrical Devices Division under the Department of Defense, with performance required in San Diego, California, at ZIP code 92136-3581. While no set-aside type is specified, the procurement is part of a broader DOD supply chain effort and must be fulfilled by a qualified subcontractor capable of meeting technical and logistical demands. The official solicitation can be accessed through the DIBBS portal via the provided URL, and timely compliance with all technical and delivery requirements is essential for award consideration.
Watch, Clock, and Part Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Management and SDS ComplianceThe contract seeks a small business to identify, manage, and document hazardous materials used in manufacturing and packaging operations, ensuring full compliance with OSHA, EPA, and DOT regulations. Key responsibilities include authoring and maintaining Safety Data Sheets, implementing and verifying mercury-free processes, and maintaining thorough documentation to meet federal environmental and workplace safety standards. The work must be performed at the designated location in New Cumberland, Pennsylvania, with all activities aligned to regulatory requirements for handling, storage, transportation, and disposal of hazardous substances. This is a total small business set-aside under SBA guidelines, classified under NAICS code 541620, which pertains to environmental consulting services. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026. The contracting activity is under the Department of Defense’s Electrical Devices Division, and the subcontract will be managed through the DIBBS system. Performance requires strict adherence to federal compliance frameworks and an ability to deliver accurate, audit-ready documentation for hazardous materials management throughout the supply chain.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CDI SafeguardingThe contract requires the implementation and maintenance of NIST SP 800-171 security controls to safeguard covered defense information, ensuring compliance with federal cybersecurity standards for protected data. All subcontractors must establish and uphold robust safeguards to prevent unauthorized access, disclosure, or compromise of sensitive information, with a strict obligation to report any cyber incidents to the appropriate authorities within 72 hours of discovery. Failure to meet these requirements may result in contractual penalties or termination, emphasizing the critical nature of continuous monitoring and rapid response capabilities. This is a small business set-aside subcontract under the SBA Total Small Business Set-Aside program, designated for businesses that qualify as small according to SBA standards, with the NAICS code 541512 indicating information technology services. The performance location is specified as New Cumberland, PA, with a ZIP code of 17070-5002, and the contracting office falls under the Department of Defense’s Electrical Devices Division. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and must be submitted through the DIBBS platform using the provided reference number.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThe contract requires specialized packaging, preservation, and labeling services for sensitive electronic components, strictly adhering to Department of Defense and Defense Logistics Agency standards including MIL-STD-2073-1E and MIL-STD-129, with full compliance to barcode specifications. All work must ensure the protection, longevity, and traceability of electronic parts throughout storage and transit in alignment with federal military requirements. The performance location is identified as New Cumberland, Pennsylvania, with the zip code 17070-5002, and the work is contracted under the Electrical Devices Division of the Department of Defense. This is a Small Business Set-Aside opportunity classified under NAICS code 561910, reserved exclusively for small businesses as defined by the Small Business Administration. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, with the contract structured as a subcontract under the DIBBS platform.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332211
New
DIBBS
Precision Manufacturing of Sensitive Electrical SwitchesThe contract calls for the precision manufacture and delivery of six sensitive electrical switches, identified by NSN 5930-01-300-7748 and part number EA790-20100, to meet stringent military specifications for use in critical applications. All units must comply with DLA packaging and preservation standards to ensure operational readiness and environmental protection during transport and storage. The work is designated as a total small business set-aside under the SBA program, restricting eligibility to small businesses as defined by FAR 19.5, with the NAICS code 332211 applying to the electrical component manufacturing category. The requirement is issued under a subcontract structure by the Electrical Devices Division within the Department of Defense, with performance required at New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on August 3, 2026, and responses must be submitted no later than August 14, 2026, with all proposals expected to demonstrate technical compliance, quality assurance, and adherence to defense logistics requirements.
Cutlery and Flatware (except Precious) Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Transportation LogisticsThe contract involves the domestic and international transportation of goods to Hill Air Force Base, Utah, with strict compliance required for U.S. transportation regulations, including the mandatory use of U.S.-flag vessels for all sea freight segments. Invoicing must be submitted through the Wide Area WorkFlow system to ensure full governmental accounting and payment processing standards are met. The work scope spans both domestic and international logistics, requiring coordination across multiple modes of transport and adherence to federal compliance protocols. Performance is strictly tied to the specified delivery location at Hill AFB with the zip code 84056-5734. The North American Industry Classification System code 484220 identifies this as a contract under the truck transportation sector, indicating the primary logistics function may involve surface freight movement, though international components necessitate multimodal planning. The solicitation was posted on August 3, 2026, with bids due by August 14, 2026, and it is categorized as a subcontract, suggesting it feeds into a larger prime contract under the Department of Defense's Electrical Devices Division.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 10 days
View Details