Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SYRINGE AND NEEDLE, HYP

Active
SPE2DS-26-T-301JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of sterile, disposable, safety-designed hypodermic syringes and needles, each with a 3-milliliter capacity and 20-gauge needle, shipped in quantities of 100 per pack. The syringes feature an automatic retraction mechanism that pulls the needle into the barrel after use to prevent accidental needlesticks, ensuring compliance with safety standards. The product must be non-toxic and non-pyrogenic, and all units must be individually sealed in protective packaging to prevent damage or contamination during transit. Packaging must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, and exterior shipping containers must ensure safe, cost-effective delivery to the designated point of performance at Tinker AFB, Oklahoma. The shelf life is strictly limited to 60 months without extension. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date. The item is identified by NSN 6515-01-452-0408 and falls under NAICS code 339112. Bidders must provide the source and part number, and the item is subject to potential control under Covered Defense Information regulations. The solicitation has a response deadline of August 10, 2026, with a 20-day required delivery timeline after award.

General Info

Sterile 3mL 20-gauge safety syringes with auto-retract needles, 100 per pack, 60-month shelf life, compliant with DLA standards, delivered to Tinker AFB.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

7050 AIR DEPOT BLVD BLDG 1094, TINKER AFB, OK, 73145, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-301J.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
DOROTHY MARQUIS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SYRINGE AND NEEDLE,HYPODERMIC,SAFETY
SYRINGE AND NEEDLE,HYPODERMIC,SAFETY,,
SYRINGE AND NEEDLE HYPODERMIC SAFETY 3ML 20GAGE 100S<(>,<)>
NON-TOXIC; NON-PYROGENIC; DEPRESSING PLUNGER AUTOMATICALLY
RETRACT NEEDLE FROM PATIENT INTO SYRINGE BARREL. STERILE
AND DISPOSABLE
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
UNIT OF ISSUE: PG/100EACH
..
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
.. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE2DS-26-T-301J
SECTION B
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-452-0408 Quantity: 1 PG Purchase Request: 7017702043QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339112
New
DIBBS
SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-300Q
An aneroid sphygmomanometer designed for pediatric use, this device features a two-tube cuff with a blue nylon material and hook-and-loop closure, calibrated for accurate blood pressure measurements up to 300 mmHg. It includes an inflation bulb with tubing and a check valve, a no-pin-stop manometer with integrated tubing, and a carrying case for portability. The cuff is clearly marked with artery labels and index range markings to facilitate proper placement and readings. The manometer is backed by a ten-year calibration warranty, ensuring long-term accuracy and reliability. The unit is supplied as a complete assembly, with each item considered a single unit of issue. This contract requires the delivery of eight units under NSN 6515-01-311-0419, with a purchase request number 7017723157 and a delivery requirement of 84 days after order award. The solicitation number is SPE2DS-26-T-300Q, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance taking place in APO 96260-5479. Bidders must provide the source and part number for the supplied item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The government mandates removal of its identification from any non-accepted supplies. The solicitation closed on August 10, 2026, after being posted on August 3, 2026, under NAICS code 339112 for medical device manufacturing.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE SET, INTRAOSS
Solicitation # SPE2DS-26-T-301Q
The contract specifies the procurement of pediatric intraosseous needle sets designed for use with the EZ-IO battery-powered driver, intended for patients weighing between 3 and 39 kg. Each unit includes five sterile 15-gauge needles, each 15mm in length, constructed from 304 stainless steel and free of latex, along with five EZ-Connect connectors and five wrist bands for securement. The unit of issue is PG/5each, with a total order quantity of two packs. The materials must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and proper packaging is required to ensure protection from damage during transit, with commercial exterior containers suitable for safe delivery by common carriers at the lowest feasible rate. All supplies must be marked in accordance with DLA standards, and the vendor must provide the source and part number for each item supplied, tied to the NSN 6515-01-537-9013. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to DLA packaging and defense information protocols. Delivery is required within 20 days of award, with performance specified at Charleston AFB, and the solicitation was issued under contract number SPE2DS-26-T-301Q with a bid deadline of August 10, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
TUBING, ANESTHESIA
Solicitation # SPE2DS-26-T-301G
The contract specifies the procurement of anesthesia tubing, 22mm by 36 inches, in boxes of ten units, with a total quantity of two boxes required. The item is identified by NSN 6515-01-667-6524 and is intended for medical use under the Department of Defense’s Medical Supply Chain. Packaging must comply with Commercial standards as outlined in the procurement documentation, requiring each unit to be sealed in a protective container to prevent damage, with exterior shipping containers suitable for safe transport by common carriers at the lowest cost to the delivery point at Camp Lejeune, NC. All items must be labeled in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and instructions for obtaining this standard are provided through DLA Troop Support. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is due within 20 days of award, and the solicitation was issued under contract number SPE2DS-26-T-301G with a response deadline of August 10, 2026. The contract is managed by Patrick Esposito of the Department of Defense, and the NAICS code for the procurement is 339112.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, SUPRAGLOTTIC
Solicitation # SPE2DS-26-T-302G
The airway device is a disposable supraglottic airway designed as a simple-to-use alternative for patient ventilation, featuring a dedicated channel that allows passage of a gastric tube and a straightened, beveled distal tip to facilitate proper placement posterior to the larynx and into the upper esophagus. Each unit includes a 60cc syringe and lubrication, is sized as size 5 with a purple tip, and measures 1.02 feet by 0.48 feet by 0.15 feet. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. Labeling must comply with the latest revision of MMS1A and include the manufacturer date, expiration or retest date, and contract and lot numbers. All packaging and marking must adhere to the Medical Marking Standard No. 1 and DLA packaging requirements, with government identification removed from non-accepted supplies. The item is identified by NSN 6515-01-699-9685, with a quantity of 20 units required under solicitation SPE2DS-26-T-302G, issued on August 3, 2026, and due for response by August 10, 2026. Delivery is expected within 20 days after order award to Fort Hood, Texas, with technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. Bidders must provide the source and part number for the product being offered.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
BLOOD COOLER, FIELD TRA
Solicitation # SPE2DS-26-T-301W
The blood cooler is a field transport container specifically designed for combat medics to maintain the cold chain for one unit of whole blood during rescue, evacuation, and stabilization operations in austere environments. It is an ultra-lightweight solution that reliably preserves blood at a stable temperature of 4°C (39°F) for a minimum of 16 hours without requiring external power, ensuring viability in remote or high-tempo operational settings. The system integrates vacuum insulated panels (VIP) protected by an ultralight hard shell to resist punctures, a thermal insulated capsule (TICS), a data logger with an integrated probe pocket for secure internal routing to eliminate snag hazards, and a Coyote Multicam MOLLE carrier for secure attachment to tactical gear. Designed and clinically tested for military use, the unit is built for durability, portability, and uncompromised temperature control under extreme conditions. Each unit must be packaged commercially in a sealed container that protects against damage or breakage, with shipping containers meeting carrier requirements for safe and cost-effective delivery to the指定 location. All packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and proper labeling is mandatory for acceptance. The item is identified by NSN 6515-01-695-0929, with a contract solicitation number SPE2DS-26-T-301W, issued under the Department of Defense, and is subject to all technical and quality requirements referenced in the DLA Master List. Bidders must specify the exact source and part number being offered, and delivery is due within 84 days of award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
DRAINAGE UNIT, PLEURAL
Solicitation # SPE2DS-26-T-301V
The contract specifies the procurement of a mobile chest drain unit designed for pleural cavity drainage with a 500ml collection capacity, featuring a one-way valve, simple air leak detection, and compatibility with both suction and gravity drainage. The unit is compact and lightweight, supplied in cases of six each, with strict requirements governing packaging and labeling. Each unit must be sealed in a protective container and shipped in commercial exterior containers suitable for safe delivery via common carriers at the lowest applicable rate. All items must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and must bear clear labels indicating the manufacturer date, expiration or retest date, contract number, and lot number. The product must be delivered within 30 days of award, and no more than five months may have elapsed between the manufacturer’s date and delivery to the government. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation or award date. Packaging, labeling, and removal of government identification from non-accepted supplies are subject to specific DLA directives. The item is identified by NSN 6515-01-525-4904, and bids must include the source and part number. Delivery is to APO 09227-0000, with the contract issued under solicitation SPE2DS-26-T-301V by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, PHARYNGEAL
Solicitation # SPE2DS-26-T-300W
The contract pertains to the procurement of 12 disposable Berman pharyngeal airway devices, each 60mm in size, for pediatric use, with a unit of issue comprising 12 units per package. All items must be packaged in sealed, protective containers that safeguard against damage or breakage, and shipped in commercial exterior containers designed for safe transportation via common carrier at the lowest possible rate to the specified delivery point in El Segundo, California. Packaging and labeling must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and suppliers are required to provide the source and part number along with the NSN 6515-01-211-6819. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect at the time of solicitation or award controls compliance. The solicitation, issued under SPE2DS-26-T-300W, has a response deadline of August 10, 2026, with delivery expected within 20 days after award. The North American Industry Classification System code is 339112, and this is a federal procurement managed by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
SUPPORT, WRIST
Solicitation # SPE2DS-26-T-301Y
This wrist support is designed to alleviate ulnar sided wrist pain caused by rotating, gripping, and weight-bearing activities. It is a one-size-fits-most device compatible with both wrists, featuring adjustable hook and loop strapping for a secure and customizable fit. The product is constructed without latex, rubber, or DEHP, making it safe for users with sensitivities and compliant for use in MRI environments. It is reusable and supplied in black. Each unit must be individually packaged in a sealed container that protects against damage or breakage, and all units must be shipped in commercial exterior containers that ensure safe delivery at the lowest possible rate to the specified delivery point in APO 09227-0000. Packaging and marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, and all items must be labeled accordingly. The product is identified by NSN 6515-01-700-9525, with a quantity of five units required under purchase request 7017726907, and delivery is due within 84 days of award. Bidders must provide the source and part number being supplied, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements effective as of the solicitation issue date. The contract falls under NAICS code 339112, is managed by the Department of Defense’s Medical Supply Chain, and the point of contact is Patrick Esposito. This solicitation is subject to Covered Defense Information provisions and DLA packaging and supply marking regulations.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
DRAINAGE SYSTEM, EXT
Solicitation # SPE2DS-26-T-300N
The contract pertains to the procurement of two units of an external drainage system without an EVD catheter, identified by NSN 6515-01-523-8459, for replacement collection bags only. The item must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referencing specific R and I numbers, and must meet shelf-life standards of 60 months, non-extendable, with no more than nine months elapsed between the manufacturer’s date and delivery to the government. Labeling must include the manufacturer date, expiration or retest date, contract number, and lot number in accordance with the latest revision of Medical Marking Standard No. 1, which governs all packing and marking requirements. Each unit must be sealed in commercial packaging suitable to prevent damage, and shipping containers must ensure safe, cost-effective delivery via common carrier to the designated point of performance in APO, ZIP 96260-5479. The procurement falls under solicitation SPE2DS-26-T-300N, issued on August 3, 2026, with responses due by August 10, 2026, and delivery required within 84 days after award. Bidders must provide the source and part number being supplied, and all packaging must adhere to the commercial standards specified in the procurement document, superseding older references such as SPE2DS-26-T-300N and MIL-STD-129.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
DRAIN, SURGICAL
Solicitation # SPE2DS-26-T-300Y
The contract calls for the procurement of 25 boxes of Penrose surgical drains, each box containing ten units of 1/2 inch by 12 inch flat drains designed to wick fluid from abdominal surgical sites. Each drain is equipped with a safety pin to prevent backslide into the wound. The item has a non-extendable shelf life of 60 months, with no more than nine months allowed to have elapsed between the manufacturer’s date and delivery to the government. All products must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and require clear labeling with the date of manufacture, expiration or retest date, and contract or lot number. Packaging must meet DLA requirements, and government identification must be removed from non-accepted supplies. Bidders must specify the source and part number being offered, and the item is identified by NSN 6515-01-699-8616. Delivery is required within 20 days of award to Camp Lejeune, North Carolina, under solicitation SPE2DS-26-T-300Y, with responses due by August 10, 2026. Technical and quality standards referenced in the DLA Master List apply, and compliance is mandatory.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
DELIVERY KIT, OBSTETRIC
Solicitation # SPE2DS-26-T-301C
The contract specifies the procurement of two obstetrical delivery kits designed for emergency normal deliveries, particularly in ambulance settings. Each kit contains essential disposable items including one pair of gloves, one drape sheet, two umbilical cord clamps, two O.B. towels, one disposable scalpel, one obstetrical pad, one receiving blanket, six gauze sponges, one bulb syringe, four disposable towels, two nylon tie-offs, two alcohol preps, two twist ties, and one plastic bag. All components must be new, unused, and packaged in sealed unit containers that safeguard against damage or breakage, with exterior shipping containers meeting commercial standards to ensure safe, cost-effective delivery to the specified point of performance in APO 96260-5479. The kits must maintain a 24-month shelf life, with no more than three months having passed from the manufacturer’s date to the delivery date to the government. Labeling must comply with Medical Marking Standard No. 1, clearly indicating the manufacturer date, expiration or retest date, contract number, and lot number, replacing all prior references to MIL-STD-129. The National Stock Number is 6515-01-343-2145, with a delivery requirement within 84 days of award, and the solicitation is governed by the terms of SPE2DS-26-T-301C, incorporating applicable technical and quality requirements from the DLA Master List. Bidders must provide the source and part number of the supplied kits, and all packaging and marking must adhere strictly to DLA’s current packaging and medical marking guidelines.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
SUPPORT, CERVICAL
Solicitation # SPE2DS-26-T-301M
The contract pertains to the procurement of adult-size, adjustable cervical supports with a trachea hole and rear cervical spine port, identified by NSN 6515-01-452-4435, with a quantity of five units required under purchase request 7017702784. Delivery is mandated within five days of award, and the solicitation is issued under contract number SPE2DS-26-T-301M with a response deadline of August 10, 2026. The item falls under NAICS code 339112 and is being procured by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance located at Offutt AFB, Nebraska. Bidders must supply the exact source and part number being offered, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to delivery. The primary point of contact is James Burke, reachable via phone or email for solicitation inquiries.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 621410
New
DIBBS
TEST STRIPS, SANITIZING
Solicitation # SPE2DS-26-T-301P
Test strips for sanitizing testing are designed to measure the concentration of quaternary ammonium compound (QAC) sanitizers used in dishwashing rinse cycles, with a detection range of 50 to 400 ppm. These impregnated paper strips provide a quick and reliable method to verify sanitizer strength, ensuring proper disinfection standards are met in institutional and commercial food service environments. The product is identified by NSN 6550-01-452-1775 and is being procured under a federal solicitation issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a purchase request number of 7017702433 and a quantity of two units. The solicitation, numbered SPE2DS-26-T-301P, was posted on August 3, 2026, with responses due by August 10, 2026. Delivery is required within five days of award, and the place of performance is designated as APO with ZIP code 96278-2060. The primary point of contact for inquiries is Anh Lam, reachable via email at anh.lam@dla.mil or phone at 215-737-7477.
Family Planning Centers

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-302E
The contract specifies the supply of adhesive bandages measuring 0.750 inches by 3 inches, packaged in quantities of 30 per unit, with a total order of three packages. The bandages are sterile, feature a flesh/clear color, and are affixed to a plastic adhesive backing. Each package must be sealed in a suitable unit container that protects the contents from damage, and all units must be packed in commercial shipping containers compliant with low-rate carrier standards for safe delivery to the designated point. The product must have a minimum shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling requirements mandate inclusion of the date of manufacture, expiration or retest date, contract number, and lot number, all formatted in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129. Compliance with DLA packaging and medical marking standards is mandatory, and all supplies must be marked as specified. The bandages are identified by NSN 6510-01-519-5781 and fall under the NAICS code 339113, with a required delivery within 20 days of award. The solicitation is issued under SPE2DS-26-T-302E by the Department of Defense’s Medical Supply Chain, and bidders must clearly state the source and part number being offered. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to defense information controls.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
INTRODUCER KIT, CATH
Solicitation # SPE2DS-26-T-301U
The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, including a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and two inches of 2-0 nylon suture with reverse cutting. The kit is identified by NSN 6515-01-663-2913 with a quantity of 14 kits required for delivery within 84 days of award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the scale of the acquisition. Packaging must adhere to DLA specifications and all non-accepted supplies must be cleared of government identification prior to shipment. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-301U, was posted on August 3, 2026, with responses due by August 10, 2026, under NAICS code 339113 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain under the agency name Medical Supply Chain MD Surg FSF, with performance addressed to APO 09227-0000.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
SPLINT, ANKLE
Solicitation # SPE2DS-26-T-301F
The contract specifies the procurement of a reusable, black, lace-closure ankle splint made of nylon, designed to stabilize ankle injuries and capable of being washed. The item is regulated by the FDA and must be supplied with specific manufacturer part numbers including Medical Specialties Inc P/N 223615 and Henry Schein P/N 2430003; bidders are required to clearly state the country of origin and part number being offered. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a protective container and shipped in exterior containers that ensure safe delivery at the lowest rate to the designated destination. Marking must adhere to Medical Marking Standard No. 1, superseding all prior referencing standards, and copies of this standard are available through DLA Troop Support. The National Stock Number is 6515-01-529-9830, with a quantity of 3 units required at a unit price of $3.00, totaling $9.00. Delivery is due within 84 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The solicitation falls under DLA’s medical acquisition procedures and incorporates all applicable technical and quality requirements referenced in the DLA Master List, with packaging required to meet MIL-STD-2073-1E. The contract is issued under solicitation SPE2DS-26-T-301F, with responses due by August 10, 2026, and the place of performance is APO, ZIP 96260-5479.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325413
New
DIBBS
CHIP, HYDROGEN PEROX
Solicitation # SPE2DS-26-T-300S
The contract specifies the procurement of a single unit of a hydrogen peroxide test chip designed for use with a CMS analyzer, featuring ten measurement capillaries pre-filled with substance-specific reagent for detecting hydrogen peroxide concentrations within a range of 0.20 to 2.0 PPM, enabling ten individual tests. The item is identified by NSN 6550-01-530-8328 and is governed by solicitation SPE2DS-26-T-300S, issued by the Department of Defense’s Medical Supply Chain under the NAICS code 325413. The delivery is required within 84 days of award, with performance taking place at APO 96260-5479. The product must comply with stringent packaging and labeling requirements under Medical Marking Standard No. 1, superseding MIL-STD-129, with all units sealed in commercial-grade containers to prevent damage during transit and shipped in exterior containers suitable for carrier acceptance at the lowest cost. A critical shelf-life condition mandates that the item must have no more than one month elapsed since manufacture at the time of delivery, with a total non-extendable shelf life of 12 months from production. Labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number in accordance with MMS1C guidelines. The procurement is subject to DLA packaging and quality requirements, and the contractor must provide source and part number details, with all technical specifications incorporated from the DLA Master List of Technical and Quality Requirements.
In-Vitro Diagnostic Substance Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
CHIP, CARBON DIOXIDE
Solicitation # SPE2DS-26-T-301A
The CHIP, CARBON DIOXIDE item is a diagnostic unit containing ten measurement capillaries pre-filled with a carbon dioxide reagent, designed specifically for use with the CMS gas analyzer. It has a detection range of 200 to 3000 ppm and is intended for medical use in gas analysis applications. This item is classified as a TYPE I (CODE M) shelf-life item with a strict 24-month non-extendable shelf life, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a protective container, with shipping containers ensuring safe, low-cost delivery to the specified point of performance at Offutt AFB, Nebraska. All labels must clearly show the date of manufacture, expiration or retest date, contract number, and lot number in accordance with MMS1C standards. The procurement is governed by DLA Master List technical and quality requirements, with applicable provisions including packaging standards, removal of government identification from non-accepted supplies, and handling of covered defense information. The contract is issued under solicitation SPE2DS-26-T-301A, with a single unit requested and a delivery requirement of five days after award. The item falls under NAICS Code 621410, and the contract is managed by the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue listed as the primary point of contact. All documentation, labeling, and compliance must adhere strictly to current DLA directives, and the solicitation response deadline is set for August 10, 2026.
Family Planning Centers

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
AIRWAY, ORAL
Solicitation # SPE2DS-26-T-300U
The contract is for the procurement of a large, sterile, disposable oral airway device, specifically the Berman type at 100 mm length, with a unit of issue of 10 pieces per package. The item is identified by the NSN 6515-01-367-5272 and is being solicited under SPE2DS-26-T-300U with a response deadline of August 10, 2026. Deliveries must be completed within 20 days after award. Bidders are required to clearly state the manufacturer source and part number being offered. Technical and quality requirements referenced under RA001, RP001, and RQ011 govern this procurement, incorporating standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition type. Packaging and handling must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. The place of performance is Charleston AFB, South Carolina, under the Department of Defense’s Medical Supply Chain, and the procurement falls under NAICS code 339113 for surgical and medical instrument manufacturing.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 315990
New
DIBBS
GLOVES, CHEMICAL AND
Solicitation # SPE2DS-26-T-300Z
The contract specifies the procurement of 8 pairs of chemical and oil protective gloves, made from neoprene over natural rubber with a 26 mil thickness and 12 inches in length, sized extra-large. The gloves are flock lined, feature a tractor tread grip, and are colored black-over-blue with a safety design. They are puncture resistant and offer resistance to acids, alcohols, oils, and caustics, meeting compliance with 21 CFR parts 170–199. The unit of issue is a pair, and the NSN is 8415-01-448-8646. Bidders must clearly state the source and part number being supplied, and all supplies must adhere to DLA packaging and technical requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation, identified as SPE2DS-26-T-300Z, was posted on August 3, 2026, with a response deadline of August 10, 2026, and requires delivery within 20 days after order placement. The purchase request number is 7017702020, and the place of performance is Beale AFB, California, with a ZIP code of 95903-1908. The contracting agency is the Department of Defense under the Medical Supply Chain MD Surg FSF unit, and the primary point of contact is Marc Canalichio, reachable via email and phone. The NAICS code is 315990, indicating the classification for other textile product mills, and the procurement is for federal use without a set-aside designation.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details