This Government Contract opportunity from Government of Canada was posted on June 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Tactical Interface Adapter Manufacturing

Closed

International

Submission Closed06/29/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334511

New

DIBBS

VALVE PORT, NEEDLE FREEVALVE PORT, NEEDLE FREE is a sterile, needleless connector designed for use in medical applications requiring neutral displacement and touch-free operation, supplied in peel pouches to maintain sterility. Each package contains 200 units, with the contract calling for three packages totaling 600 units. The item has a non-extendable shelf life of 60 months, and no more than nine months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA requirements, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders must clearly identify the source and part number being offered. The NSN is 6515-01-591-5707, with a delivery requirement of 20 days after order award, and performance is mandated at Fort Bliss, Texas. The solicitation, issued under SPE2DS-26-T-277A, was posted on July 28, 2026, with responses due by August 3, 2026, and is administered by the Department of Defense’s Medical Supply Chain under the NAICS code 334511. Point of contact for inquiries is Dorothy Marquis, reachable via email or phone provided.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

BLOOD RECIPIENT SET, INThe contract specifies the procurement of 48 units of a Blood Recipient Set designed for indirect transfusion, featuring a Y-type blood and solution set with a standard large blood filter ranging from 170 to 260 microns and a pressure pump. The set includes two ClearLink Luer actuated valves, one positioned 6 inches and the other 42 inches from the male Luer lock adapter, with an approximate drop rate of 15 drops per milliliter and an overall length of approximately 99 inches or 2.5 meters. Each unit must be sealed in a protective container to prevent damage and shipped in commercial exterior packaging suitable for safe transport via common carriers at the lowest cost to the designated delivery point at Fort Bragg, North Carolina. All packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements apply. The NSN is 6515-01-593-0865, the solicitation number is SPE2DS-26-T-277W, bids are due by August 3, 2026, and delivery is required within 20 days of award. The item falls under NAICS code 334511 and is managed by the Department of Defense’s Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

ELECTRODE GEL, ELECTROMThe contract specifies the procurement of electrode gel for electromedical use, supplied in packages of three 4 oz tubes, with a unit of issue as a single package. The product must be a mild, abrasive skin prepping gel designed to remove dry surface skin and moisten the corneum layer to enhance electrical conductivity and ensure high-quality EEG tracings. The gel must have a minimum shelf life of 36 months, with no more than five months elapsed between the date of manufacture and the date of delivery to the government. All units must be sealed in protective containers that prevent damage or breakage and must be packed in commercial exterior shipping containers suitable for safe delivery by common carrier at the lowest feasible rate to the designated delivery point at Fort Bliss, Texas, with a delivery deadline of 20 days after award. Marking must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The product is identified by NSN 6515-01-595-4854 and is subject to DLA packaging and technical requirements outlined in the DLA Master List of Technical and Quality Requirements. Bidders are required to provide their source and part number, and the solicitation, issued under SPE2DS-26-T-277Z, closed for responses on August 3, 2026, with the contract falling under NAICS code 334511 within the Department of Defense’s Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

LASER LEVELING DEVICEThe contract specifies the procurement of a Laser Leveling Device for use with the Codman CSF External Drainage System, identified by NSN 6515-01-612-7325, with a quantity of ten units required. The device incorporates a reusable bubble level and a Class 2 laser lamp, designed to ensure precise alignment in medical settings. The unit is offered as each and must comply with technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being supplied. The solicitation number is SPE2DS-26-T-278W, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with a response deadline of August 3, 2026, and delivery expected within 84 days of award. The point of contact for inquiries is Patrick Esposito, reachable via email and phone provided in the contract data.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

CABLE, INVASIVE BLOOD PThe contract specifies the procurement of an invasive blood pressure transducer cable with a right-angle Edwards connector, intended for use with oval transducers, under the NSN 6515016150921. Each unit is to be supplied as a single item, with no tolerance for quantity variance, and must be delivered within 20 days to Travis Air Force Base in California under FOB destination terms. The product is regulated by the FDA, requiring the contracting official to refer bidder and manufacturer details to a product specialist for confirmation prior to award. All packaging must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 and MIL-STD-129, and must be marked according to Medical Marking Standard No. 1. The cable must be shipped by traceable means only; parcel post is explicitly prohibited. Bidders must provide the exact source and part number being offered, with approved supplier part numbers including MCKESSON 802437 and ZOLL 8300-0787-01. The contract includes multiple CLIN entries for the same item to facilitate separate fulfillment or tracking, all with identical delivery, inspection, and packaging criteria. The required delivery date is July 29, 2026, and the solicitation was issued under SPE2DS-26-T-278N with a response deadline of August 3, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

RESUSCITATOR, HAND OThe contract specifies the procurement of six packages of pediatric hand-operated resuscitators, each package containing six units, for a total of 36 devices. The resuscitators are AMBU bags designed for pediatric use, featuring a latex-free construction, a manometer port, a child mask, a double swivel elbow, a removable accumulator, a PEEP valve, and a 40-inch oxygen reservoir tube. These devices meet exacting technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance tied to the version of the master in effect at the time of solicitation or award. Packaging must adhere to DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. The item is identified by NSN 6515-01-585-5916 with a required delivery within 20 days of award. The solicitation, issued under SPE2DS-26-T-276X by the Department of Defense’s Medical Supply Chain, is targeted for performance at Fort Bliss, Texas, and falls under NAICS code 334511 for medical equipment manufacturing.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

COVER, ELECTRONIC COThe contract pertains to the procurement of 12 units of COVER, ELECTRONIC CO with NSN 5895-01-576-1316 under solicitation SPE7M8-26-T-5626, requiring delivery within five days FOB origin to the designated receiving point at Tobyhanna Army Depot, Pennsylvania. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards, and packaging must adhere to ASTM D3951 while also meeting MIL-STD-129 marking and labeling requirements. Packaging and palletization must follow RP001 DLA Packaging Requirements, and sampling for quality verification must align with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stipulated. Attributes are to be classified with specified verification levels or AQLs, and any unspecified attributes are considered major. The unit of issue is each, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The shipment must be sent via the fastest traceable means excluding parcel post, with detailed shipping, receiving, and marking instructions provided through designated DLA codes. The required delivery date is July 27, 2026, and all technical specifications referenced in the DLA Master List take precedence over all other documents.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

CASE, DEFIBRILLATOR-MONA molded soft carrying case designed specifically for the ZOLL PROPAQ MD defibrillator-monitor is being procured, constructed from vinyl with cushioned siding to safeguard the equipment during transport. Each unit is sold individually and must meet strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is subject to DLA packaging requirements and mandates the removal of government identification from any non-accepted supplies. The procurement is identified by NSN 6515-01-615-0896 with a quantity of one unit and a required delivery within 20 days of award. The solicitation, issued under contract number SPE2DS-26-T-277K, was posted on July 28, 2026, with responses due by August 3, 2026, and falls under NAICS code 334511 for medical equipment manufacturing. Performance is to be delivered to Travis AFB, California, and all bidders must clearly specify the source and part number being offered. The procurement is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Aidan Martz listed as the primary point of contact.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

RECEIVER, COUNTERMEAThe contract prohibits the intentional addition of mercury or mercury-containing compounds to any hardware or supplies provided under this agreement, with specific exceptions for functional mercury used in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents explicitly approved by NAVSEA. Portable fluorescent lamps and portable instruments containing mercury must be shockproof and include a secondary containment boundary to prevent mercury leakage, in compliance with NAVSEA 5100-003D. Additional restrictions apply to preservation, packaging, packing, and marking materials, where mercury or mercury compounds are also forbidden under IP056. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Palletization must follow DLA packaging requirements, and shipment must be sent via the fastest traceable means, excluding parcel post, to the destination address for USS CAPE ST GEORGE CG 71 at FPO AP 96662. The item, a receiver countermeasure with NSN 586501-525-0343 and part number 237413-0001 manufactured by Marotta Controls Inc, is a critical application item requiring one unit delivered within 20 days FOB destination, with zero variance allowed in quantity. Inspection and acceptance occur at the destination. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates technical and quality requirements from the DLA Master List, with CMMC Level 2 self-assessment required, and documentation for source approval must comply with RC001. Removal of government identification from non-accepted supplies and bare item marking are governed by RQ001 and RQ017. Delivery is subject to the Department of Defense’s authorized unit of issue and transportation protocols outlined in DLAD procedural notes, with the original required delivery date set for June 5, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

RING, RETAINING, OPTICALThe contract pertains to the procurement of 42 retaining rings for optical elements, identified by part number BNG-014-A5 and NSN 5855-01-613-3011, under solicitation SPE4A7-26-T-597W. Delivery is required within 20 days of award, with shipment destined for Fort Campbell, Kentucky, under FOB origin terms and no tolerance for quantity variance. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must conform to MIL-STD-129 and DLA-specific packaging guidelines under RP001. Sampling and inspection are governed by MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively, and zero non-conformances required unless explicitly waived. The item must be physically marked per RQ017 and shipped via traceable freight methods, excluding parcel post. The supplier must adhere to CMMC Level 2 self-assessment requirements, and government identification must be removed from non-accepted supplies. The contract specifies the unit of issue as PR, with a total price of $42.00, and the point of contact for inquiries is Soni Randolph of the Department of Defense. The required delivery date is July 22, 2026, though the need ship date field remains blank.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

MASK, OXYGENThis contract specifies the procurement of pediatric non-rebreathing oxygen masks, each equipped with a low-resistance check valve to prevent rebreathing and a safety vent to allow entrainment of room air, ensuring patient safety and comfort. The masks are made of clear, soft vinyl for visual assessment and patient comfort, include a 750 ml reservoir bag, and come with 7 feet of oxygen supply tubing. Each unit is packaged in quantities of fifty, with the total order requiring two packages. The item has a non-extendable shelf life of 60 months and is classified as a TYPE I (CODE S) item under applicable shelf-life requirements. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is subject to DLA packaging standards, requirements for removal of government identification from non-accepted supplies, and potential handling of covered defense information. All bidders must provide the source and part number being offered. The solicitation, issued under SPE2DS-26-T-277X with a response deadline of August 3, 2026, is managed by the Department of Defense’s Medical Supply Chain and requires delivery within 20 days of award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

NEBULIZER, MEDICINALThe contract specifies the procurement of a single ultra-lightweight, battery-operated medicinal nebulizer under NSN 6515-01-614-9279, with the manufacturer part number NE-U100 supplied by BARRINGTON VENTURES LTD. The unit must be packaged in a sealed container that ensures protection from damage, with all exterior shipping containers compliant with commercial standards and capable of safe delivery at the lowest possible freight rate to the destination. Labeling and marking are strictly governed by Medical Marking Standard No. 1, which replaces MIL-STD-129, and require inclusion of the NSN, manufacturer and CAGE code, manufacture date, expiration or retest date, contract number, and lot number prefixed with “MFD” on all containers. Packaging must conform to ASTM D3951 unless superseded by higher-priority DLA technical and quality requirements, and palletization must follow RP001 guidelines. The device is FDA-regulated, requiring a referral through EBS to confirm compliance before award. Delivery is due within 20 days FOB destination to Fort Bliss, Texas, with no tolerance for quantity variance. Shipping must occur via traceable means, excluding parcel post, and includes specific military identifiers such as W8001Z and TCN W8001Z62050070 for government tracking. The required delivery date is July 29, 2026, with contract solicitation closed for response by August 3, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

in 6 days

AI Contract Overview

The contract involves the design, manufacture, and supply of Tactical Interface Adapters that are compatible with Vodia Diagnostic Systems, specifically tailored to meet stringent technical and environmental requirements for defense applications. It is issued by the Department of National Defence under the Government of Canada and is classified as a subcontract opportunity with an associated NAICS code of 334511, which pertains to electronic manufacturing. The solicitation was posted on June 12, 2026, with a response deadline set for June 29, 2026. The scope of work includes ensuring the adapters meet all necessary defense standards and are suitable for use in challenging operational environments. The place of performance is listed as British Columbia and Nova Scotia, indicating that manufacturing or delivery will occur in these provinces. While there is no specific type of set-aside indicated, the opportunity targets organizations qualified to meet government procurement requirements within this specialized sector.

General Info

Design and supply Tactical Interface Adapters for defense, Canadian Department of National Defence contract.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJun 12

subcontract

Response DeadlineJun 29

Deadline has passed

Submission Closed

06/29/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Design, manufacture, and supply of Tactical Interface Adapters compatible with Vodia Diagnostic Systems, meeting technical and environmental specifications for defense use.