Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on January 14, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

TAFB Multiple Award Roofing Contract (MARC)

Closed
FA8137-TAFB-MARCFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238160
New
Inland Empire Job Corps-Request for Quote Roof Design & Build
Solicitation # inland-empire-job-corps-request-quote-roof-design-build
Management & Training Corporation is seeking quotes for a fixed-price design-build subcontract to construct an over-build enclosure for the lower roof of Building G at the Inland Empire Job Corps Center in San Bernardino, California. The project involves designing and installing a roof covering approximately 800 gross square feet, featuring a 3% sloped roof with a single ply, EPDM 60 mil roofing system over wood or metal decking. The scope includes structural framing that extends existing bearing walls or utilizes a new post-beam system, the installation of three LED strip light fixtures with one emergency backup, and strict adherence to OSHA safety standards and the Architectural Barriers Act Accessibility Standard of 2007. The total period of performance is 240 days, with a requirement to complete the work within 100 consecutive business days following the Notice to Proceed. Bids are due by November 2, 2026, and will be evaluated based on overall best value. This is a small business set-aside opportunity open to various SBA certifications. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Bidders must conduct a physical site visit and sign an attendance roster to be eligible. The project is subject to Construction Wage Rate Requirements, necessitating compliance with California prevailing wages and the submission of weekly certified payroll reports. Additionally, all inspections and testing must be conducted by an independent, third-party agency registered in California. Required insurance minimums include 1 million dollars per occurrence for general liability, 1 million dollars for auto, and 500,000 dollars for workers compensation.
Inland Empire Job Corps

POSTED

about 1 hour ago

DEADLINE

in 4 days
NAICS: 238160
New
SLED
47971 CONSTRUCTION
Solicitation # 47971 - C
Solicitation 47971-C is a construction project issued by the New York State OGS Design and Construction for the replacement of the roof and associated mechanical systems at the Troop F Headquarters in Middletown, New York. The scope of work encompasses comprehensive architectural, electrical, and structural modifications, including the removal of specific skylights and roof framing, the application of various waterproof and general surface finishes, and abatement work related to the first-floor reflected ceiling plan. Electrical requirements include the installation of keyed systems, the relocation of equipment for HVAC engineers, and the installation of permanent conductive fiber optic cables. The contractor is responsible for providing all necessary tools, equipment, and materials, as well as procuring all permits required for the final certificate of occupancy. All work must adhere to applicable building codes, local safety and zone differential regulations, and manufacturer recommendations. Key deliverables include the final inspection of roof trusses, sheathing, tiles, gutters, downspouts, and storm drainage systems, with final acceptance of the fastening system requiring written approval from the Owner and Architect. The solicitation was posted on October 16, 2026, with a response deadline of November 18, 2026.
NYS OGS Design & Construction - Construction Contractors

POSTED

about 7 hours ago

DEADLINE

in 20 days

General Info

NAICS

238160 - Roofing Contractors

Place of Performance

Tinker AFB, OK, 73145, USA

Set-Aside

NONE

Documents

1

DRAFT+MARC+IDIQ+Roof+SOW_r1_as+of+20200107.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseClosed
Posted

Sources Sought

Notice updated

The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8137 Afsc Pzioc
Contacts1 person available
OfficeTINKER AFB, OK, 73145-9125, USA
Office AddressTINKER AFB, OK, 73145-9125, USA
Contacts
Stephen Palmer

Full Description

Show more
TAFB Multiple Award Roofing Contract (MARC) IDIQ 07 January 2020 THERE IS NO SOLICITATION AVAILABLE AT THIS TIME REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE This Sources Sought Synopsis (SSS)/Request for Information (RFI) Market Research is being conducted to identify potential sources that may possess the expertise, capabilities, and experience to meet the qualification requirements of the Multiple Award Roofing Contract (MARC) Indefinite Delivery / Indefinite Quantity (IDIQ) contract action for use by Tinker Air Force Base (AFB). While industry sources are requested to provide full and comprehensive responses to this questionnaire, they are reminded that all information is voluntary and the Government will not reimburse sources in any way for responses provided. Likewise, a company's participation in the market research via this questionnaire does not obligate the Government to enter into any contractual agreement, either formally or informally with a company. Below is a description of the TAFB MARC IDIQ requirement, Draft MARC Statement of Work (SOW) and a Contractor Capability Survey, which allows you to provide your company's capability. If, after reviewing these documents, you desire to participate in the market research, you should provide documentation that supports your company's capability in meeting these requirements. As part of this Market Research a draft Statement of Work (SOW) for the MARC is attached. Questions relative to this market research should be addressed to Stephen N. Palmer by email at contact@example.gov. TAFB MARC IDIQ DESCRIPTION The following North American Industry Classification System (NAICS) code applies to this request of information: 238160 (Roofing Contractors). The size standard for this NAICS code is $16,500,000.00. The description of work will be identified in each individual Delivery order. Performance and payment bonds will be required per individual Delivery order in accordance with Federal Acquisition Regulation Part 29. The proposed delivery order would consist of a multiple line item, firm-fixed-price, indefinite-delivery, indefinite-quantity vehicle to execute a broad range of roofing projects. Contractor will be required to furnish all materials, equipment, transportation, and personnel necessary to manage and accomplish projects. In general, contractors would be expected to accomplish a wide variety of tasks in the industry trade including, but not limited to: repair and/or replacement of base roofing at TAFB. The contractor's shall be expected to respond have the capability to respond to several Request for Proposals (RFP) in a short period of time and manage several construction projects simultaneously. Should a future requirement evolve from this preliminary planning process, it is anticipated that that a multiple award IDIQ contracts or a single award IDIQ could be awarded, each for a term consisting of one base year plus nine one-year option periods. Delivery Orders written against the MARC are anticipated to range between $3,000.00 and $5,000,000.00. The overall program value is still under consideration; however, at this point the magnitude of construction is between $100,000,000.00 to $250,000,000.00 over the ten-year period. All interested parties are invited to respond and must be currently registered in the System for Award Management (SAM) database (http://www.sam.gov/). The information requested will be used within the Air Force to facilitate decision making and will not be disclosed outside the agency. CONTRACTOR CAPABILITY SURVEY Contractor Capability Statements shall be limited to five (5) pages, Times New Roman and 12 Font. At a minimum capability statement shall state skills, experience, and knowledge required to perform this type of work. Include the following: 1. Company name, address, point of contact (POC), telephone number, fax number, email address, CAGE Code, and DUNS Number. 2. Company's business size and/or socioeconomic statuses (i.e. Large Business, Small Business, Emerging Small Business, SBA Certified 8A Program Participant, SBA Certified HUB Zone Firm, Small Disadvantaged Business, Service Disabled Veteran Owned Business, Veteran Owned Business, Woman-Owned Business). 3. A listing of any government contracts held over the last three (3) years and at least two (2) roofing construction contracts. Include the Contract Number, Period of Performance, Dollar Value of Project, Location of Project and if the project was completed on time and on cost. 4. Company's bonding capacity; single award capacity and an aggregate bonding capacity. 5. If you are a small business, would you consider submitting a proposal as a prime contractor? 6. What percentage of most roofing projects would you have to sub-contract out or is your company self-sufficient in performing roofing requirements? 7. What is the minimum and maximum dollar value project for which your firm would consider submitting a proposal? 8. What are the most critical criteria that would distinguish one company's capabilities from another? Explain. 9. Do you have any other comments or suggestions that you would like to share with us? 10. Reference the draft SOW. a) Does your company consider that the information in each document is clear and concise regarding the duties and responsibilities that the Government expects the contractor to perform? If not, please identify the information that is needed or that requires additional detail and/or clarification. b) Did your company identify any areas in the specifications that presented excessive cost, schedule, or performance risks? If so, please provide detailed information and suggested mitigation. CONTRACT TYPE AND COMPETITION TAFB Construction Program Office is contemplating a firm fixed price (FFP) contract type for each delivery order. Projected Period of performance (POP) for each project will vary. The Air Force is also contemplating IAW FAR Part 6.1 Full and Open Competition unless Market Research otherwise determines and exclusion to FAR Part 6.1. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. ATTACHMENT(S) Draft MARC IDIQ Roof SOW_r1_as of 20200107 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx This is NOT a formal notice of solicitation. Telephone or facsimile inquiries and/or responses will not be accepted. Any questions or request for information must be sent to the Contracting Officer POC email below not later than 24 January 2020. All responses to any questions to this SSS/RFI will be posted on Contract Opportunities Website (www.beta.SAM.gov) in order that all potential sources have the same information available to them. If your firm has an interest in proposing on future requirements as described above, please prepare and mail hard two (2) hard copies of your Capability Statement Survey or email the not to exceed 5 pages not later than 12 February 2020 to: CONTRACTING OFFICE POC Name: Stephen N. Palmer Title: Contracting Officer Office: AFSC / PZIOC 7858 5 Street Suite 1 Bldg 3 Tinker AFB, OK 73145 Email: contact@example.gov "Notice to Offeror(s)/Supplier(s): Funds are not available for this effort. No award will be made under this Sources Sought/ RFI. The Government reserves the right to cancel this Sources Sought/ RFI, either before or after the closing date. In the event the Government cancels this Sources Sought/RFI, before or after the closing date the Government has no obligation to reimburse an offeror for any costs." Any future solicitation, including specifications and/or drawings, will be made available only on the Contract Opportunities Website (www.beta.SAM.gov). Interested Parties are solely responsible for monitoring the aforementioned website for release of a solicitation package and/or any updates and/or amendments.

More opportunities from Department Of Defense → FA8137 Afsc Pzioc

Same awarding agency

NAICS: 236220
New
Federal
2-STEP SEALED BID - TINKER AFB WWYK250019 Remove and Replace Fire Sprinkler in Plasma Booth Dust Collectors and Replace the Building F/A System, B3221
Solicitation # FA813726R0021
Solicitation FA813726R0021 is a total small business set-aside for a MACC full design-build project at Tinker Air Force Base, Oklahoma, specifically located in Building 3221. The scope of work requires the contractor to provide all design, engineering, materials, labor, and equipment necessary to remove and replace fire sprinklers in the plasma booth dust collectors and replace the building fire alarm system. The project is restricted to current Tinker AFB MACBOA holders under NAICS 236220. Once awarded, the contractor must commence work within 10 calendar days of the notice to proceed, with a mandatory performance period of 300 calendar days. The government is utilizing a two-step sealed bidding process. Step one involves a mandatory site visit and the submission of a technical proposal without pricing; only offerors found technically acceptable proceed to step two, where they submit a final price bid. Award will be granted to the lowest evaluated priced proposal that is determined to be technically acceptable and responsible. Technical evaluations focus on the contractor's management approach and ability to coordinate subcontractors and warranty support, while price proposals are evaluated for reasonableness, balance, and realism. Contractors must provide bid, performance, and payment bonds and adhere to strict security and base access protocols. Technical requirements include compliance with NFPA 72 and NFPA 2001 standards, as well as DFARS cybersecurity regulations for facility-related control systems. Invoicing and payments will be processed electronically through the Wide Area WorkFlow system. All proposals must follow specific formatting guidelines and include a detailed construction price breakdown per the CSI Master Format System.
Commercial and Institutional Building Construction

POSTED

about 8 hours ago

DEADLINE

in 2 months
View Details
NAICS: 236220
New
Federal
WWYK240015 - Rehab Tanks 62501E & 62501W
Solicitation # FA813726R0020
Solicitation FA813726R00020, project WWYK240015, is a request for proposals for the rehabilitation of tanks 62501E and 62501W at the Tinker Air Force Base Industrial Waste Treatment Plant in Oklahoma. The scope of work includes replacing failed internal coatings, repairing or replacing the cathodic protection system, repairing secondary containment seals, and removing construction waste from the secondary containment. Additionally, the project requires the replacement of electrical systems for the raised platform and the cleaning and recoating of exterior stairs and structures. This opportunity is exclusively open to current MAC BOA holders at Tinker AFB, and attendance at the initial site visit was mandatory for eligibility. The project is scheduled for completion within 310 calendar days from the receipt of the Notice to Proceed. Award will be based on the Lowest Priced Technically Acceptable (LPTA) source selection procedure, where the contract is awarded to the responsible offeror with a technically acceptable proposal and the lowest evaluated price. Technical evaluations focus on capability and management, requiring a detailed project narrative and a project-specific approach. The contract incorporates various FAR and DFARS clauses, including Davis-Bacon wage requirements and specific cybersecurity and safety standards. Although the solicitation process included multiple updates regarding RFIs and site visits, the posting was officially cancelled on October 28, 2026.
Commercial and Institutional Building Construction

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 237310
Federal
WWYK100209-Repair Perimeter Dr and Industrial Blvd
Solicitation # FA813727R0003
Solicitation FA813727R0003 is a pre-solicitation for the full depth replacement of Perimeter Drive and specific sections of Industrial Boulevard at Tinker Air Force Base, Oklahoma. This opportunity is strictly set aside for SBA Certified Women-Owned Small Businesses (WOSB), with an estimated project value between 5 million and 10 million dollars. The scope of work includes providing all labor, materials, and equipment to remove and replace damaged or severely cracking concrete, as well as installing pavement markings. A mandatory site visit is scheduled for October 20, 2026, requiring an RSVP by October 16, 2026, and requests for information are due by October 27, 2026. The contract mandates strict adherence to quality and safety standards, including the Davis-Bacon Act, EM 385-1-1 safety requirements, and Foreign Object Debris awareness training for all personnel. Key personnel requirements include a Project Manager with 10 years of commercial construction experience and a Superintendent with at least five years of experience. Deliverables include a baseline construction schedule due within 10 calendar days of the Notice to Proceed, weekly inspection records, and final as-built drawings in both PDF and AutoCAD formats. The contractor is responsible for a comprehensive inspection process, including a contractor punch-out inspection and a pre-final inspection within five days of substantial completion.
Highway, Street, and Bridge Construction

POSTED

8 days ago

DEADLINE

in about 23 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS