This Solicitation opportunity from Government of Canada was posted on September 22, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

TANK,MIXING,INCINERATOR

Closed

W8482-263966/AInternational

Submission Closed09/22/2025, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332420

New

Federal

Eos Veto Water Tank (6250 gallons)

Solicitation # BZ-2027-01

Lawrence Berkeley National Laboratory is conducting market research via a Request for Information to identify capable sources for the fabrication and delivery of an external veto water tank for the Eos neutrino detector. The tank must have a capacity of 6,250 gallons and be installed on a level surface within a wet pan with no more than 2 inches of overhead clearance. Technical specifications include a water temperature scale rated from -40 to +85 degrees Celsius, a Class B maximum impact hazard rating, and the use of Alum 6061-T6 for yoke construction. This activity is for informational and planning purposes only and does not constitute a formal solicitation or a request for quotes. All future procurement awards will be subject to FAR Clause 52.225-1, requiring the delivery of domestic end products under the Buy American Act. Interested parties are encouraged to provide input on materials and fabrication methods, though they are cautioned not to include proprietary information as responses may be disclosed publicly. The primary point of contact for this effort is Brian Zatkow.

Berkeley National Labor - DOE Contractor

POSTED

DEADLINE

147117 - 147117 PANEL, WRAP TANK

Solicitation # 232982

The City of Los Angeles has issued solicitation number 232982 for the procurement of wrap tank panels. This local government opportunity is managed by the City of Los Angeles, with Eric Lau serving as the primary point of contact for inquiries regarding the content and requirements of the bid. The project is based in Los Angeles, California, within the 90012 zip code area. Interested vendors must submit their responses by the deadline of November 19, 2026, at 5:00 PM. Participation may require formal registration on the City of Los Angeles official website to ensure eligibility and compliance with submission guidelines.

POSTED

DEADLINE

Паливозаправний комплекс у складі двох наземних паливних резервуарів 25 м³ і паливороздавальної колонки на два види пального (зі встановленням та пусконалагоджувальними роботами) за ДК 021:2015 – 44610000-9 Цистерни, резервуари, контейнери та посудини ви

Solicitation # UA-2026-11-10-016533-a

The Municipal Enterprise of the Pyatykhatky City Council Communal Service is soliciting bids for the procurement of a fuel supply complex. The required equipment includes two ground-based fuel tanks with a capacity of 25 cubic meters each and a fuel dispensing column capable of handling two types of fuel. The scope of work extends beyond delivery to include full installation and commissioning services. This solicitation, identified by number UA-2026-11-10-016533-a, was posted on November 10, 2026, with a response deadline set for November 25, 2026. The project will be executed in Pyatykhatky, Dnipropetrovsk Oblast, Ukraine. Interested parties may coordinate with the primary point of contact, Mykhailo Yurkov, regarding the technical requirements and submission process.

КОМУНАЛЬНЕ ПІДПРИЄМСТВО П'ЯТИХАТСЬКОЇ МІСЬКОЇ РАДИ "КОМУНАЛЬНИЙ СЕРВІС"

POSTED

DEADLINE

Metallic Hose Assembly ProductionThis subcontract involves the production and supply of 136 metallic hose assemblies for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The assemblies must be fabricated to meet the technical specifications for NSN 4720-01-096741-6, using either standard fabrication methods or approved Additive Manufacturing processes. All deliverables must strictly adhere to DLA Packaging Requirements RP001. The project falls under NAICS code 332420 and is managed by the Department of Defense. Performance for this contract will take place at Robins Air Force Base. Interested parties should note the response deadline of November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Carbon Dioxide Compressed Gas Cylinder SupplierThis subcontract involves the supply of 20 compressed gas cylinders for Carbon Dioxide storage to support prime contractors on DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing units that strictly adhere to NSN 8120-01-681-8875 and the DLA Master List of Technical and Quality Requirements. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with performance taking place in New Cumberland. Compliance with DFARS 252.225-7001 Buy American standards is mandatory for this procurement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Metal Tube Assembly Manufacturing/SupplyThis subcontract involves the manufacturing and supply of metal tube assemblies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The contractor is responsible for producing or sourcing tube assemblies that match NSN 4710-01-608-7819, with all work falling under NAICS code 332420. The scope of work requires the delivery of 47 palletized units via First Destination Transportation. All items must be packaged and palletized in strict adherence to RP001 DLA Packaging standards. Performance for this contract is centered in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-9996

Solicitation SPE4A6-27-T-9996 is a small business set-aside for the procurement of six Air-Pak Fifty SCBA respiratory pack full cylinders (NSN 6830016064643), classified as Commercial Off The Shelf items. The requirement specifies Scott Technologies part numbers 200368 REV M IT.4 or 804721-31-S. Delivery is required by June 17, 2027, with a need ship date of May 4, 2027, to DLA Distribution San Joaquin in Tracy, California. The contract is governed by NAICS code 332420 and requires destination inspection and acceptance. The items are classified as hazardous materials (Compressed Air, Hazard Class 2.2, UN1002) and must be packaged and marked according to MIL-STD-129, MIL-STD-2073-1E, and the Hazard Communication Standard. Specifically, cylinders that cannot fit in a UN certified 4G fiberboard box must be palletized as Load Type IX per MIL-STD-147. The contractor must provide SDS and OSHA hazard warning labels for approval by technical personnel prior to award. Additionally, the contract mandates compliance with the Buy American Act, DFARS cybersecurity reporting, and the prohibition of intentionally added mercury in hardware. Payment and receiving reports must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

CYLINDER, COMPRESSED GA

Solicitation # SPE4A5-27-T-2655

Solicitation SPE4A5-27-T-2655 is a request for the procurement of 20 bottles of compressed carbon dioxide cylinders under NSN 8120-01-681-8875 for the Defense Logistics Agency. The requirement is managed by the DLA Weapons Support ASC Supplier Oper OEM Division, with delivery specified as FOB Origin. The original required delivery date is February 23, 2028, with a need ship date of May 4, 2027, and a delivery window of 171 days after order. Inspection and acceptance will occur at the destination, governed by FAR 52.246-2. The contract mandates strict adherence to packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Domestic shipments must comply with DOT regulations, while export shipments must meet UN International Requirements. Cylinders that cannot fit in UN-certified 4G fiberboard boxes must be palletized as Load Type IX per MIL-STD-147. Additionally, hazardous materials must be labeled according to the Hazard Communication Standard 29 CFR 1910.1200. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment. The solicitation incorporates several critical regulatory clauses, including DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program, DFARS 252.204-7012 for safeguarding covered defense information, and DFARS 252.204-7016 concerning covered defense telecommunications equipment. Offerors are identified under NAICS code 332420 and must provide necessary representations and certifications via the DIBBS portal.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Мембранний бак V 150, за кодом ДК 021:2015 «Єдиний закупівельний словник» - 46610000-9 - Цистерни, резервуари, контейнери та посудини високого тиску

Solicitation # UA-2026-11-06-010381-a

The Military Medical Clinical Center of the Northern Region is procuring a V 150 membrane tank, categorized under the procurement code for cisterns, reservoirs, containers, and high-pressure vessels. This solicitation, identified as UA-2026-11-06-010381-a, is being conducted by a state customer in the defense sector via the electronic procurement system. The process is governed by the specific regulations for defense procurement during the period of martial law as established by Cabinet of Ministers of Ukraine Resolution No. 1275. The contract strictly prohibits goods originating from the Russian Federation, the Republic of Belarus, or the Islamic Republic of Iran. Performance of the contract will take place in Kharkiv, Ukraine. Interested parties must submit their responses by November 16, 2026, with primary coordination handled by Oksana Holovina.

ВІЙСЬКОВО-МЕДИЧНИЙ КЛІНІЧНИЙ ЦЕНТР ПІВНІЧНОГО РЕГІОНУ (ВІЙСЬКОВА ЧАСТИНА А-3306)

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-1959

This solicitation, issued by the DLA Weapons Support Land Supplier Operations Vehicle Support, is for the procurement of 23 pressure tanks under NSN 2530-00-741-1078. The requirement is designated as a small business set-aside and is defined by specific Army drawings and quality assurance provisions. A critical component of the contract is the First Article Test (FAT) requirement, which necessitates the testing of two units and the submission of a test report within 90 calendar days of the contract award. The primary delivery for the tanks is required within 273 days, with a need ship date of May 4, 2027, and a final required delivery date of March 13, 2028. The contract mandates strict adherence to quality and technical standards, including SAE AS9003 or ISO 9001 compliance and sampling methods per MIL-STD-1916 or ASQ H1331. Inspection and acceptance are conducted at the origin. Packaging must comply with MIL-STD-129 and RP001, with specific requirements for hazardous materials per FED-STD-313 and TQ requirement IP025. Additionally, the contractor must comply with specialty metal requirements under DFARS 252.225-7008 and is prohibited from using Class I ozone-depleting chemicals. Payment and invoicing shall be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

CAP, VALVE, GAS CYLINDER

Solicitation # SPE4A6-27-T-9079

Solicitation SPE4A6-27-T-9079, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 39 units of a commercial off the shelf gas cylinder outlet valve cap, specifically Huber + Suhner, Inc part number 9071.99.0647. The technical specifications for the item include a nominal thread diameter of 0.4375 inches, thread class 2A, 28 threads per inch, a nominal sealing length of 4.6 millimeters, and a nominal gas discharge tube of 15.5 millimeters. The required delivery date is June 13, 2027, with a need ship date of May 4, 2027, and a delivery window of 171 days after the order. Shipping is FOB Origin, with the destination for inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, while the DLA Master List of Technical and Quality Requirements takes precedence. Quality assurance will be managed via sampling methods per MIL-STD-1916 or ASQ H1331, with a zero non-conformance requirement for acceptance. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 assessment requirements, and cybersecurity reporting under DFARS 252.204-7012. The procurement falls under NAICS code 332420 and may be eligible for automated award.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Fuel Storage Tank & Dispenser SupplyThis subcontract for Fuel Storage Tank and Dispenser Supply involves providing above-ground storage tanks and fueling hardware for prime contractors working on Maryland Department of Natural Resources facility projects. The scope of work includes the delivery of one 1,000 gallon diesel tank, one 2,500 gallon gasoline tank, side-mount dispensers, pumps, and magnetic digital automatic tank gauges. All supplied equipment must adhere to NFPA 30, 30A, 78 and API 650/620 standards, and the tanks must be delivered with a 30-year manufacturer warranty. The opportunity is categorized under NAICS code 332420 and was posted on November 5, 2026, with a response deadline of December 15, 2026. Interested parties can find further details through the Maryland eMMA portal.

POSTED

8 days ago

DEADLINE

in about 1 month

AI Contract Overview

The Department of National Defence is soliciting bids for the procurement of one incinerator mixing tank, specifically part number WP02M_10_01_01 from WPT S.R.L. The item is to be delivered to CFB Halifax, although the broader place of performance includes both Nova Scotia and British Columbia. Bidders who wish to propose an equivalent or substitute product must provide the brand name, model or part number, and the associated NCAGE. This federal solicitation, identified by number W8482-263966/A, is subject to a preference for Canadian goods and services. The Crown maintains the right to negotiate with suppliers, and submissions are accepted in either of Canada's official languages. Interested parties should coordinate with the primary point of contact, Daphne O'Connor, regarding this requirement.

General Info

DND seeks bids for one WPT incinerator mixing tank delivered to CFB Halifax.

Agency

Government of Canada → Department of National Defence

NAICS

332420 - Metal Tank (Heavy Gauge) Manufacturing

Place of Performance

*British Columbia *Nova Scotia, CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 22

Solicitation

Response DeadlineSep 22

Deadline has passed

Submission Closed

09/22/2025, 02:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of National Defence

Office AddressN/A

Contacts

Daphne O'ConnorPoint of Contact

Full Description

The Department of National Defence has a requirement for the items detailed below. The delivery is requested at CFB Halifax and CFB Esquimalt. Line Item: 001 TANK,MIXING,INCINERATOR Part Number: WP02M_10_01_01 NCAGE: AR140 WPT S.R.L GSIN: 4540 Quantity: 1 UoI: EA to be delivered to: CFB Halifax Bidders proposing an Equivalent or a Substitute Product must indicate the brand name and model and/or Part Number and the NCAGE they are offering. The requirement is subject to a preference for Canadian goods and/or services. The Crown retains the rights to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.