Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TAPE, PROTECTIVE, PLA

Active
SPE8E5-26-T-3661Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 12 units of protective plastic tape, identified by NSN 9390-01-565-9197 and part number 8681HS from 3M Company, with each unit measuring 36 yards in length and 6 inches in width, in gray color 36118. The product must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any standard such as ASTM D3951, and must be packaged and labeled per MIL-STD-129. Packaging instructions depend on whether the material is classified as hazardous under FED-STD-313; if not hazardous, commercial packaging per ASTM D3951 is acceptable, but DLA requirements take precedence. All packaging and palletization must adhere to RP001: DLA Packaging Requirements for Procurement. The delivery is FOB origin with a required delivery period of 167 days, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The tape must be delivered to the Distribution Depot in Bremerton, WA, with a required ship date of January 18, 2027, and the original required delivery date is October 15, 2026. The contract is under solicitation SPE8E5-26-T-3661, issued as a total small business set-aside under NAICS code 332510, with procurement activity managed by the Department of Defense through the Puget Sound office.

General Info

12 units 3M protective tape, 36yd x 6in gray, FOB origin, deliver to Bremerton WA by Jan 18, 2027, DLA compliance required.

Agency

Department Of Defense → PUGET SOUNDView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

BLDG 467, BREMERTON, WA, 98314-6001, US

Set-Aside

SBA

Documents

(1)

SPE8E5-26-T-3661.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → PUGET SOUND
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → PUGET SOUND
View Agency Profile
Office AddressUS
Contacts
Nafis Beyah
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TAPE,PROTECTIVE,PLA
TAPE,PROTECTIVE,PLASTIC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
UIROLL, LENGTH 36 YARDS, WIDTH 6 INCHES
GRAY 36118
3M COMPANY 76381 P/N 8681HS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017585214 0001 EA 12.000
NSN/MATERIAL:9390015659197
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
SPE8E5-26-T-3661
SECTION B
PR: 7017585214 PRLI: 0001 CONT’D
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3216
DLA DISTRIBUTION PUGET SOUND
467 W STREET
BLDG 467
BREMERTON WA 98314-6001
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3216
DISTRIBUTION DEPOT PUGET SOUND
467 W STREET
BLDG 467
BREMERTON WA 98314-6001
US
Need Ship Date:01/18/2027 Original Required Delivery Date:10/15/2026
SPE8E5-26-T-3661 NSN/Part Number: 9390-01-565-9197 Quantity: 12 EA Purchase Request: 7017585214QTY: 12 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
RING, RETAININGThe contract is for the procurement of retainer rings identified by NSN 5325-01-116-4977 and part number M2742610163D, with a quantity of 3,344 units to be delivered within 99 days under solicitation SPE4A6-26-T-09AN. All items must conform to the current revision of MIL-DTL-27426E and MIL-DTL-27426/1B standards, and any hardware manufactured after the solicitation date must meet the latest version of these standards. The product is classified as a critical application item, and compliance with tailored higher-level quality requirements is mandatory. Manufacturing and inspection must adhere to the DLA Master List of Technical and Quality Requirements, which override other standards including ASTM D3951. Packaging must follow MIL-STD-129 for marking and labeling, comply with DLA Packaging Requirements for Procurement, and be palletized in accordance with RP001. All items are to be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the origin point. The delivery destination is the DLA Distribution Albany facility in Albany, Georgia, with a required ship date of March 27, 2026, and an original delivery deadline of March 14, 2027. The contract is administered by the Department of Defense’s ASC Commodities Division, and all technical, quality, and packaging specifications are governed by official DLA and DoD directives.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
GROMMET, NONMETALLICThe contract is for the procurement of 2 nonmetallic grommets with NSN 5325-01-481-1737 and part number 863-000613, issued under solicitation SPE4A7-26-T-590K by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 20 days of award, FOB origin, with no quantity variance permitted, and inspection and acceptance will occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with precedence given to the DLA Master List of Technical and Quality Requirements over ASTM standards. The unit of issue is each, with a fixed price of $2.00 per unit, totaling $4.00. Packaging must follow RP001 DLA packaging requirements and be palletized accordingly. Shipments must be sent via traceable freight, explicitly prohibiting parcel post, and delivered to the specified military logistics address at March ARB, CA. The required delivery date is July 16, 2026, and the contract references applicable technical and quality standards identified by R or I numbers from the DLA Master List. The responsible point of contact is Naron Sanderlin, with additional government-use codes and identifiers provided for tracking and disposition.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThe contract is for the procurement of 63 units of a spacer sleeve identified by NSN 5365-00-061-8248 and part number NAS43HT6-24, manufactured in accordance with NAS43 Revision 12 dated 11/30/2012. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951. Inspection and acceptance are to occur at origin, with sampling conducted under MIL-STD-1916 or an equivalent zero-based sampling plan, and zero non-conformances required unless otherwise specified. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and unspecified attributes are treated as major. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements RP001, with palletization following those same standards. The item is designated as a critical application item and must be marked and labeled per RQ017. Delivery is FOB origin with no variance permitted in quantity, and the required delivery date is 107 days from contract award, with an original deadline of February 17, 2027 and a needed ship date of November 15, 2026. The delivery address is DLA Distribution Jacksonville, and all transportation instructions must follow DLAD Proc Notes C19 and C20. The contract number is SPE4A7-26-T-590S, issued as a federal solicitation under NAICS code 332510, with procurement initiated through Purchase Request 7016845196.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, DUST
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
MOUNT, RESILIENT, WEAThis contract, identified as SPE4A6-26-R-XB58, is a Firm-Fixed-Price solicitation issued by the Defense Logistics Agency Aviation, Commodities Division under the Department of Defense, targeting a total small business set-aside with a NAICS code of 332510 for resilient mount supplies. The contract has an estimated aggregate ceiling of $350,000 over a five-year period, with variable delivery order quantities per year ranging from a minimum of 37 to a maximum of 224 units, though no unit pricing has been established and offers are solicited to fill these blanks. Performance is required under F.O.B. Origin terms, with delivery expected within 119 days after receipt of order, and inspections are conducted at the contractor’s facility prior to shipment, adhering to FAR 52.246-2 and 52.246-11 for quality assurance with final acceptance authority resting with the government. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130, including mandatory 2D Data Matrix barcoding, adherence to RP001 DLA packaging guidelines, and strict prohibition of mercury compounds under IP056, while items designated as TYPE I with CODE W must maintain a non-extendable 120-month shelf life through designated preservation methods. The contract incorporates multiple FAR and DFARS clauses mandating compliance with Buy American requirements, prohibitions on hexavalent chromium and fluorinated aqueous film-forming foam, restrictions on toxic materials, and a preference for U.S.-flagged commercial vessels in transportation. Subcontracting obligations require flow-down of key clauses, with full text of the prohibition on foreign-flag vessels and transportation representation requirements binding upon the prime contractor and any subcontractors exceeding the simplified acquisition threshold. Deviations are authorized and annotated in specific clauses, including a unique deviation for the small business set-aside notice and subcontracts for commercial products. Invoicing must occur exclusively through WAWF with no alternatives permitted, and payment processing is governed by specific DoDAAC identification requirements. Solicitation responses require full representation of entity size status and UEI/CAGE codes through SAM, affirmative disclosures regarding prohibited telecommunications, forced labor, or controlled substances, and certification of compliance with cybersecurity and safeguarding requirements under DFARS 252.204-7012
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
CUSHIONING MATERIALThe contract specifies the procurement of cushioning material identified by part number 24760 and NSN 8145-01-603-9516, supplied by Knight's Armament Company, with a total quantity of 13 units to be delivered FOB origin within 56 days, targeting a required delivery date of October 26, 2026. Each unit is priced at $13.00, with no variance allowed in quantity, and inspection and acceptance are to occur at the destination. The material must be packaged in strict compliance with ASTM D3951, subject to precedence of the DLA Master List of Technical and Quality Requirements, and labeled per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and all packaging must be marked and labeled according to the contract. The goods are to be delivered to the designated receiving warehouse in Tracy, California, with shipping instructions governed by DLAD Proc Note C19 and C20. The solicitation, issued under contract number SPE8ED-26-T-1165, falls under NAICS code 332510 and was posted July 22, 2026, with responses due by August 3, 2026. This procurement involves covered defense information and requires strict control over government identification removal from non-accepted supplies during handling.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
SLIDE, DRAWER, EXTENSThe contract pertains to the procurement of one slide drawer extension unit, identified by NSN 5340-01-525-8105 and part number 1506206-R, under solicitation SPE7L1-26-T-862M. Delivery is required within 20 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, including specific packaging methods, materials, and unit containment procedures, with palletization governed by DLA packaging requirements. No mercury or mercury-containing compounds may be intentionally incorporated or come into direct contact with the hardware unless exempted for functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or chemically specified reagents approved by NAVSEA, and any portable mercury-containing devices must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The contract reference incorporates technical and quality requirements from the DLA Master List, with controls tied to solicitation and award dates depending on acquisition type. The delivery destination is the USS RAFAEL PERALTA DDG 115, with shipping instructions and transportation protocols detailed in DLAD procedural notes. All commercial items must adhere to the DoD unit of issue standards, and the contract requires strict compliance with all specified packaging, marking, and regulatory conditions for government acceptance.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
CASE, TRANSIT, AMALThe contract pertains to the procurement of 40 transit cases designated as CASE, TRANSIT, AMAL, with part number 332100-FR and NSN 8145-01-563-8608, manufactured by Becklin Holdings, Inc. DBA ECS Case. Each case measures 33L x 25W x 16H inches, weighs 39 pounds, is colored green with black hardware, and includes special features such as stackability, fire retardancy, composite resin construction, no cushion, an air valve, and non-hinged design. The items must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence and must be followed, including marking and labeling per MIL-STD-129. Packaging and palletization must adhere to RP001: DLA Packaging Requirements for Procurement. Delivery is FOB origin with a 140-day delivery window, no variance in quantity allowed, and inspection and acceptance occur at the destination. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is issued under solicitation SPE8ED-26-T-1167, with a total set-aside for small businesses, and is subject to the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The unit of issue is each, with a total contract value based on the unit price for 40 units, and the original required delivery date is February 19, 2027.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BUCKLE, RATCHETThe contract pertains to the procurement of a single ratchet buckle, identified by NSN 3020-01-293-5153 and part number FE7739-20 from Kinedyne LLC, with a required delivery of one unit within 20 days of award. Delivery is FOB origin and inspection and acceptance occur at the destination, with no tolerance for quantity variance. Strict packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129 must be followed, including compliance with DLA’s packaging directives and prohibitions against mercury or mercury compounds except in specifically exempted functional components like batteries or sensors approved by NAVSEA, which must also include secondary containment as mandated by NAVSEA 5100-003D. The item is classified as a critical application component for naval Trident systems, requiring adherence to all technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements. Shipping must use the fastest traceable method, avoiding parcel post, and must be directed to the receiving officer at the Trident Refit Facility in Kings Bay, Georgia. The solicitation number is SPE7L1-26-T-861T, with a response deadline of August 3, 2026, and the original required delivery date is July 20, 2026. All contractual obligations are governed by the DLA’s authorized unit of issue and federal acquisition regulations, under the oversight of the Department of Defense’s Land Supply Chain organization.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
INCLINOMETER, INDUSTThe contract is for the procurement of two industrial inclinometers, identified by NSN 5340-01-629-1586 and part number 20035A28, under solicitation SPE7L1-26-T-862G. The requirement is for delivery of both units within twenty days of contract award to the U.S. Army SSA SUSBDE APS 405th AFSB at Leutsestraat 34, Zutendaal 3690, Belgium, with FOB origin terms and zero tolerance for quantity variance. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, superseding general industry standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement, with hazardous material exceptions governed by TQ requirement IP025. The unit of issue is each, and the total contract value for two units is based on a fixed price with no variation allowed. The goods must be marked, labeled, and palletized according to DLA specifications, with specific freight and transportation procedures referenced via DLAD Proc Notes C19 and C20. Delivery must occur no later than July 20, 2026, and the contract is managed under the Land Supply Chain of the Department of Defense, with Kristina Derry as the primary point of contact. The solicitation is open to all eligible suppliers under NAICS code 332510, with responses due by August 3, 2026. Government identification on non-accepted supplies must be removed per RQ011, and all packaging data must reflect the QUP of 1 unit per pack. The contract includes mandatory compliance with DLA’s electronic procurement standards and documentation referenced through official DLA and DoD portals.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
SPRING, SPECIALThe contract pertains to the procurement of two specialized springs identified by NSN 5360-00-404-5062, with a required delivery within five days of award. All supplies must comply with DLA packaging requirements and incorporate technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website. The applicable revision of the master list is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment specifically updates the requirements, in which case the amendment date governs. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for authorized functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, and specified chemical reagents approved by NAVSEA. Any portable fluorescent lamps or portable instruments containing mercury must be shockproof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. The solicitation, issued under number SPE7L1-26-T-862Q, was posted on July 22, 2026, with responses due by August 3, 2026, and falls under NAICS code 332510. The contracting activity is managed by the Department of Defense’s Land Supply Chain, with performance to be delivered to FPO, zip code 96632. Primary point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACE, INFLATABLE BOThe contract mandates the procurement of six inflatable boat braces with NSN 2040015006574 under solicitation SPE7M4-26-T-273P, requiring delivery within 20 days to Fort Meade, Maryland, FOB origin, with no variance allowed in quantity. All items must comply with ASTM D3951 packaging standards unless superseded by higher-priority technical or quality requirements from the DLA Master List of Technical and Quality Requirements, and all packaging must be marked and labeled per MIL-STD-129. The Unit of Issue is each, and palletization must follow DLA Packaging Requirement RP001. Shipment must be sent by the fastest traceable method, excluding parcel post, to the specified Fort Meade delivery point with a required delivery date of July 20, 2026. Packaging must include the designated Unit of Issue and Quantity per Unit Pack as specified, and the supplier must remove any government identification from non-accepted supplies. The contract is managed by the Department of Defense’s Fluid Handling Division, with primary point of contact Rory O’Reilly, and the solicitation response deadline is August 3, 2026.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → PUGET SOUND

Same awarding agency

NAICS: 331491
New
DIBBS
SHEET, METALThe contract specifies the procurement of perforated aluminum alloy sheet metal with precise dimensional and technical requirements: 0.051 inch thickness, 36 inches wide, 96 inches long, with 0.188 inch diameter perforations spaced 0.438 inches center-to-center in a staggered vertical pattern. The material must conform to SAE AMS-QQ-A-250/8C and ASTM standards for alloy 5052 in H32 temper, and must be supplied in whole-foot lengths only without test coupons. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the QSLD are eligible for award, and any deviation must be explicitly declared. Unauthorized substitutions may result in criminal penalties. A Certificate of Quality Compliance must accompany each shipment, and continuous identification markings are required on every unit, including DLA contract number, NSN, specification revision, alloy, temper, manufacturer, heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material. Packaging must follow MIL-STD-2073-1E and ASTM B660 for preservation, with marking per MIL-STD-129R, and palletization adhering to DLA packaging requirements. The product is subject to destination inspection and acceptance, with no quantity variance permitted. The delivery address is the DLA Distribution Depot in Bremerton, WA, with a required delivery date of December 24, 2026, and the contract number is SPE8E4-26-T-1911. Technical and quality requirements are governed by the DLA Master List, and the contract is governed under defense information controls with applicable CDRLs and DD Form 1423 certification mandates.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326121
New
DIBBS
PLASTIC ROUND SECTIONThe contract specifies the procurement of 100 units of a high-density, weather-resistant black plastic round section with an outside diameter of 11.0 inches and a length of 0.250 inches, meeting a minimum tensile strength of 2800 PPI and containing carbon at 2.50% plus or minus 0.5% by weight. The material must comply with ASTM D2103 Revision NR as Class H, Grade 1, Type III, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting commercial standards. Packaging must adhere to DLA Packaging Requirements for Procurement (RP001) and MIL-STD-129 labeling, with non-hazardous material packaged per ASTM D3951 unless otherwise dictated by the DLA Master List. Hazardous material, if applicable, must follow TQ requirement IP025 per Fed-Std-313. The unit of issue is each (EA), with a fixed quantity of 100 units and zero variance permitted. Delivery is set for 167 days after order placement, with FOB origin terms, and the required delivery date is November 2, 2026, though the need ship date is January 18, 2027. Inspection and acceptance occur at the destination. The shipment must be delivered to DLA Distribution Puget Sound at 467 W Street, Building 467, Bremerton, WA 98314-6001, with transportation details governed by DLA Procurement Notes C19 and C20. The product is identified by NSN 9330-01-325-2990 and associated purchase request 7017585750 under contract SPE8E5-26-T-3648. Covered Defense Information potentially applies, and removal of government identification is required from non-accepted supplies. The solicitation was issued on July 22, 2026, with a response deadline of August 3, 2026, and is managed by the Department of Defense through the Puget Sound office, with Don Trachtman as the point of contact.
Unlaminated Plastics Profile Shape Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332313
New
DIBBS
SHEET, METAL
Plate Work Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, THROTTLEThis contract pertains to the procurement of a single throttle valve, identified by NSN 4820-01-418-6456 and part number 134B811AAG-3, supplied by Curtiss-Wright Electro-Mechanical Corp or Siemens Government Technologies. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Mercury and mercury-containing compounds are strictly prohibited in the manufacturing or contact with the valve, except for specified functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA, with portable fluorescent lamps and instruments required to have shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. The item must be packaged according to MIL-STD-2073-1E, marked per MIL-STD-129 with no special markings, and palletized in accordance with DLA packaging standards. Delivery is FOB origin with zero variance in quantity, scheduled for 227 days from the solicitation date, with a required shipment date of December 24, 2024, and original delivery deadline of June 20, 2025. The delivery destination is the DLA Distribution Depot in Bremerton, WA, and the point of contact for procurement inquiries is Marisa Thompson. The contract is issued under solicitation SPE7MC-26-T-143Z, with inspection and acceptance occurring at the destination, and transportation details governed by DLA procedural notes C19 and C20.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
TAILPEACE, BALL VALVThe contract pertains to the procurement of six TAILPEACE, BALL VALV units identified by NSN 4810-01-322-5234, with a delivery deadline of 35 days after contract award. The item must be manufactured using a metal casting process requiring specialized tooling, and sourcing inquiries must be directed to DLA’s Aviation or Land & Maritime Supply Chains teams. Full and open competition is in effect under a Small Business Set-Aside, with NAICS code 332911. The item is subject to stringent federal requirements including Item Unique Identification (IUID) per MIL-STD-130, adherence to DLA packaging standards, and compliance with technical and quality specifications referenced in the DLA Master List. The product is classified as a defense article under export control regulations, governed by ITAR or EAR, restricting any disclosure or transfer of technical data to foreign persons without prior U.S. government authorization; only contractors with confirmed JCP certification, completed export control training, and DLA approval may access sensitive information. Additionally, ozone-depleting chemicals are strictly prohibited in production, and all components must comply with substitution approval protocols. The solicitation was posted July 21, 2026, with responses due August 3, 2026, and is managed by the Department of Defense through the Puget Sound office, with Jason Endress designated as the primary point of contact.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171) ImplementationThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard Covered Defense Information and ensure full compliance with DFARS 252.204-7012 regarding cyber incident reporting. This includes establishing, monitoring, and auditing technical and administrative safeguards aligned with the NIST framework to protect sensitive government data stored, processed, or transmitted by the contractor. The contractor must be prepared to detect, report, and respond to cybersecurity incidents in accordance with federal requirements, with timely communication of breaches or potential compromises. This is a small business set-aside subcontract under NAICS code 541512, awarded by the Department of Defense through the Puget Sound office, with performance expected in Bremerton, Washington, 98314-6001. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026. Only small businesses qualifying under the SBA’s Total Small Business Set-Aside category are eligible to respond. The contractor will be expected to demonstrate proven capabilities in federal cybersecurity compliance, particularly in environments handling controlled unclassified information, and ensure continuous adherence to the specified regulatory and technical standards throughout the contract lifecycle.
Computer Systems Design Services

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract titled Hazardous Materials Compliance & Labeling Services requires the proper handling, labeling, and documentation of hazardous items, specifically mercury-containing lamps, in full alignment with OSHA, DFARS, RCRA, and TSCA regulations. The work focuses on ensuring regulatory compliance through accurate identification, labeling, and recordkeeping to mitigate environmental and safety risks associated with hazardous waste. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility to small businesses as defined by the SBA, and is classified under NAICS code 541690 for other scientific and technical consulting services. The performance location is designated as Bremerton, WA, with a zip code of 98314-6001, and the contract was posted on July 19, 2026, with a response deadline of July 30, 2026. The contracting agency is the Department of Defense under the PUGET SOUND organization, indicating this is part of a broader federal effort to manage hazardous materials across military and defense facilities.
Other Scientific and Technical Consulting Services

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Specialized Packaging and Preservation ServicesThe contract requires specialized packaging, preservation, and labeling services for valves and lamps in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring military-grade readiness and traceability. All work must include proper handling of hazardous materials, with full adherence to defense regulations governing storage, transport, and documentation. The services are intended for delivery to a performance location in Bremerton, Washington, with a zip code of 98314-6001. This is a subcontract set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, classified under NAICS code 561910 for other support activities. The opportunity was posted on July 19, 2026, with responses due by July 30, 2026, and is managed by the Department of Defense through the PUGET SOUND office. All vendors must meet exacting military specifications and ensure complete documentation, labeling, and preservation protocols to support federal logistics and inventory systems.
Packaging and Labeling Services

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 335111
New
DIBBS
Portable Fluorescent Lamp SupplyThe contract is for the supply of eight portable fluorescent lamps equipped with mercury in sealed tubes, all of which must meet strict military packaging, labeling, and hazardous materials handling standards. The requirement is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualified under the SBA guidelines are eligible to bid. The North American Industry Classification System code 335111 applies, indicating the scope relates to lighting fixture manufacturing. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026, and the place of performance is specified as Bremerton, Washington, with a ZIP code of 98314-6001. The contracting authority is the Department of Defense through its Puget Sound office, and the opportunity is accessible via the DIBBS platform for potential bidders to review and submit proposals.

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332911
New
DIBBS
Bronze Temperature Regulating Valve SupplyThe contract requests the supply of 14 units of 1-1/2 inch bronze temperature regulating valves, identified by NSN 4820-01-530-2003, specifically for use in military portable water heaters. The valves must be mercury-free except where contained within sealed functional components, ensuring compliance with environmental and safety standards for defense applications. This procurement is structured as a subcontract under a Total Small Business Set-Aside, designated by the SBA, limiting eligibility to small businesses as defined under NAICS code 332911. The request was posted on July 19, 2026, with a response deadline set for July 30, 2026, and the place of performance is specified as Bremerton, Washington, with a zip code of 98314-6001. The responsible agency is the Department of Defense, operating under the Puget Sound office, and the solicitation can be accessed via the DIBBS platform for full details.
Industrial Valve Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, TEThe contract is for the procurement of fourteen 1-1/2 inch bronze regulating temperature valves, intended for use in portable water heaters, under NSN 4820015302003 and part number 122001-1.50 supplied by AERCO INTERNATIONAL, INC. The solicitation, issued under SPE7MC-26-T-141K, is a total small business set-aside governed by FAR 19.5 and issued by the Defense Logistics Agency through the Puget Sound office. Delivery is required within 89 days from the need ship date of October 28, 2026, with final acceptance due by January 9, 2027, and all items must be shipped FOB origin. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging codes, and unique device identifiers; palletization must follow DLA’s RP001 requirements. The valves are subject to strict material prohibitions: mercury or mercury-containing compounds cannot be intentionally added or come into direct contact with the hardware, except for approved exceptions like functional components in batteries, instruments, or sensors as defined by NAVSEA, requiring shock-proofing and secondary containment for any such items. Inspection and acceptance occur at the destination facility in Bremerton, WA, managed by the government, with compliance verified against the DLA Master List of Technical and Quality Requirements. The contract requires adherence to numerous DFARS and FAR clauses including those governing equal opportunity, trafficking in persons, employment eligibility, hazardous material identification, cybersecurity standards under NIST SP 800-171, subcontracting for commercial products, whistleblower rights, and cyber incident reporting. Invoicing must be processed electronically through WAWF, and the contractor must maintain active SAM registration with accurate size and socioeconomic status representations, including any joint venture structures. Historical pricing data for this NSN ranges from approximately $3,870 to $17,111 per unit, though the current contract line item has no assigned price, indicating a competitive procurement under simplified acquisition procedures likely resulting in a firm fixed price award.
Industrial Valve Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details