Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Tapered Roller Bearing Assembly Supplier

Active

Federal

Response Deadline10/06/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This small business set-aside subcontract through the Department of Defense involves the supply of two OEM tapered roller bearing full assemblies for Department of the Army procurement projects. The required hardware consists of Cone LL778149 and Cup LL778110, specifically Timken Part LL778149-90012, which must adhere to Imperial Series Lighter Duty specifications with a 23.00 inch bore and 27.00 inch outer diameter. Performance for this contract will take place in Watervliet, New York. The supplier is required to provide Buy American Act certification and ensure UID marking for any items exceeding 5,000 dollars in value. The solicitation was posted on October 1, 2026, with a response deadline of October 6, 2026.

General Info

DoD subcontract for two Timken tapered roller bearing assemblies delivered to Watervliet, New York.

Agency

Department Of Defense → W6QK Acc Wva

NAICS

332510 - Hardware Manufacturing

Place of Performance

Watervliet, NY, 12189, USA

Set-Aside

SBA

Documents

This scope was carved out of W911PT27QA003.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TIMKEN BEARINGS FOR TACCHI LATHE FOR WATERVLIET ARSENAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 1

subcontract

Response DeadlineOct 6

Submission deadline

Response Deadline

10/06/2026, 08:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc Wva

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W6QK Acc Wva

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies OEM tapered roller bearing assemblies for prime contractors on Department of the Army procurement projects. Provides two Tapered Roller Bearing Full Assemblies consisting of Cone LL778149 and Cup LL778110 (Timken Part LL778149-90012). Must meet Imperial Series Lighter Duty specs with 23.00" bore and 27.00" OD. Requires Buy American Act certification and UID marking for items over $5,000. Delivers two physical bearing assemblies.

Similar Contracts

Same NAICS industry code

Supply of Straight Headle Pins (NSN 5315-01-485-3536)This subcontract involves the supply of specialized straight headle pins, identified by NSN 5315-01-485-3536, for prime contractors supporting the Department of Defense Aviation Supply Chain ESOC Buys. The selected provider is responsible for manufacturing or sourcing two units of the specified hardware, ensuring all items are packaged and palletized in strict accordance with ASTM D3951 and RP001 DLA Packaging Requirements. To be eligible for identification and processing, the contractor must provide a valid CAGE Code and Unique Entity Identifier. The performance of this contract will take place in Fort Knox, Kentucky, under NAICS code 332510. Interested parties must submit their responses by October 7, 2026, following the posting date of October 2, 2026. This requirement emphasizes strict adherence to military packaging standards to ensure the integrity of the components during delivery to the prime contractor.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

Supplier of Swivel Casters (NSN 5340-01-511-7402)This subcontract involves the supply of swivel casters, specifically NSN 5340-01-511-7402, to prime contractors supporting Department of Defense Land Supply Chain contracts. The supplier is responsible for delivering two units of the specified casters to a government-arranged transportation point. Strict adherence to technical and quality standards is required, including identification marking per MIL-STD-130N and packaging according to MIL-STD-129. Additionally, the supplier must comply with the DLA Master List of Technical and Quality Requirements and follow 29 CFR 1910.1200 guidelines for the labeling of hazardous materials.

LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Supplier of Tapered Plain Pins (NSN 5315-01-676-8175)This subcontract involves the fabrication or sourcing of 51 tapered plain pins meeting NSN 5315-01-676-8175 specifications for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected supplier must possess a valid CAGE code and is responsible for coordinating source inspection and acceptance while ensuring all packaging adheres to DLA standards. Additionally, the supplier is required to provide DLA Disposition Services Form 1427 for any surplus material generated during the process. This requirement falls under NAICS code 332510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

PIN, SHOULDER, HEADED

Solicitation # SPE4A6-26-T-36QW

Solicitation SPE4A6-26-T-36QW, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for 377 units of Headed Shoulder Pins (NSN 5315-01-074-8334). The procurement is categorized under NAICS 332510, with a delivery requirement of 156 days after order, establishing a need ship date of March 8, 2027, and a final delivery date of May 3, 2027. Delivery is FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Quotations are due by October 2, 2026, and may be candidates for automated award, with a price evaluation preference available for certified HUBZone Small Business Concerns. The contract mandates strict adherence to quality and technical standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, respectively. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring approved JCP certification. Additionally, contractors must meet cybersecurity requirements, including CMMC Level 2 and NIST SP 800-171 standards, and utilize the Wide Area WorkFlow system for all invoicing and payment requests.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A6-26-U-4294

Solicitation SPE4A6-26-U-4294 is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of blind rivets, identified by NSN 5320005021661. This is a unilateral Indefinite Delivery Contract for a one-year period with a maximum contract value of 350,000.00 dollars. The estimated annual quantity is 6 units, with a guaranteed minimum of 1 unit and a minimum delivery order quantity of 3 units. The items must be manufactured in accordance with technical standard NAS1400 Revision 07 and are classified as critical application items requiring source inspection. Delivery is required within 99 days, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. Quality assurance requires the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Award will be made to a responsible offeror based on price and quality standards, with a price evaluation preference available for certified HUBZone small businesses. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A6-26-U-4382

Solicitation SPE4A6-26-U-4382 is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of blind rivets, identified as a critical application item. The requirement consists of an estimated quantity of 1,786 units of part number NAS1919C05S03 (NSN 5320014841716). The items must be manufactured in accordance with NAS1919 Revision 8 and NAS1900 Revision 6. This is a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000.00 dollars. Delivery is required within 71 days after the order, with shipping, inspection, and acceptance all occurring at the origin. The contract mandates strict quality and packaging standards, requiring compliance with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Offerors must submit quotes via the DIBBS portal by October 2, 2026. Award is based on the price quoted for the estimated annual demand and a determination of offeror responsibility, which includes the mandatory submission of a Safety Data Sheet. The contract also incorporates various FAR and DFARS clauses regarding domestic material restrictions, cybersecurity, and the use of the Wide Area WorkFlow system for electronic invoicing.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-36MS

Solicitation SPE4A6-26-T-36MS is a Request for Quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 15 units of part number 91-A5334 (NSN 5315-01-265-9190). The procurement falls under NAICS 332510 and requires quotes to be submitted via the DLA Internet Bid Board System (DIBBS) by October 2, 2026. Delivery is specified as FOB Origin under the First Destination Transportation program, with a required delivery date of February 25, 2027, to the DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Quality assurance requires a zero-based sampling plan per H1331 Table 1 or MIL-STD-1916. Additionally, additive manufacturing is prohibited unless authorized. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A6-26-U-4254

Solicitation SPE4A6-26-U-4254 is a request for quotations issued by the Defense Logistics Agency Aviation for the procurement of blind rivets under NSN 5320011852870. This is a unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars and an estimated annual quantity of 3,957 units. The contract specifies a guaranteed minimum quantity of 395 units and a minimum delivery order quantity of 494 units. Deliveries are required within 252 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Technical compliance requires adherence to reference drawing 81205 BACC15DR Revision AJ and specific part numbers from Company 81205 or SPS Technologies. Packaging must follow ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. The contract is subject to strict export controls under ITAR and EAR, requiring approved JCP certification for access to technical data. Additionally, contractors must comply with the Buy American Act and the Berry Amendment, with a reduced threshold of 150,000 dollars. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-747U

Solicitation SPE4A7-26-T-747U is a federal procurement issued by the Department of Defense, specifically DLA Aviation, for the acquisition of 27 units of a sleeve spacer, identified by NSN 5365-00-114-2256 and Curtiss-Wright part number 52B1062-1. This item is classified as a commercial item and a critical application item. The procurement is managed under NAICS code 332510 and is issued as a solicitation for automated simplified acquisition. Delivery is required within 137 days, with the shipping destination being Arizona Industries for the Blind in Phoenix, Arizona. While the delivery terms are listed as FOB Destination Other, offers must be submitted based on FOB Origin under the First Destination Transportation program. The contract mandates strict adherence to quality and packaging standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List technical requirements taking precedence. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Key regulatory requirements include the Buy American Act, DFARS 252.204-7012 for safeguarding covered defense information, and the use of the Wide Area Workflow system for invoicing. All quotations must be submitted via the DLA Internet Bid Board System.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-792F

Solicitation SPE4A7-26-T-792F, issued by the DLA Aviation ASC Supplier Oper AE and AF Div, is a request for quotes for 16 sleeve spacers under NSN 5365123151744. The procurement falls under NAICS code 332510, with a response deadline of October 2, 2026. Delivery is required within five days after receipt of order, with an original required delivery date of August 17, 2026. The items are to be delivered FOB Origin to the Letterkenny Army Depot in Chambersburg, Pennsylvania, using the fastest traceable means. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically RA001, RC001, RP001, RQ011, and RQ017. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001. Quality assurance requires sampling per MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan, with inspection and acceptance occurring at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A6-26-U-4369

Solicitation SPE4A6-26-U-4369 is a request for quotations issued by DLA Aviation for the procurement of threaded rivet pins, identified by NSN 5320011946473 and part number HL644-6-5. The government is seeking an estimated quantity of 310 units, with a guaranteed contract minimum of 31 units and a minimum delivery order quantity of 77 units. This is a source-controlled, critical application item that must be manufactured and tested according to basic drawing X14F3 AMSCBDOC. Because it is source-controlled, only vendors with access to the cited limited rights data or traceability to approved sources should quote. The procurement may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars for a one-year period. Delivery is required within 75 days after receipt of order, with shipping terms set as FOB Destination. Inspection and acceptance will occur at the destination. Quality assurance requires sampling in accordance with MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging must comply with MIL-STD-129 and RP001, with DLA Master List requirements taking precedence over ASTM D3951. Offerors must submit quotes via the DIBBS portal and comply with domestic material restrictions, including the Buy American Act and the Berry Amendment. Invoicing and payment processing must be handled through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A6-26-U-4259

Solicitation SPE4A6-26-U-4259 is a request for quotations from the Department of Defense, ASC Commodities Division, for the procurement of blind rivets under NSN 5320011953020. This is an Indefinite Delivery Contract for a one-year period with a maximum value of 350,000.00 dollars and an estimated annual quantity of 200 units. The items must be manufactured in accordance with the current revision of the applicable part standards, specifically referencing NASM90354 and NASM81177. Delivery is required within 140 days after the order date, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict quality and packaging standards, requiring compliance with ASTM D3951 and MIL-STD-129 for marking and labeling, while DLA Master List requirements and RP001 palletization standards take precedence. Quality assurance involves zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and manufacturers must maintain an inspection system complying with SAE AS9003 or ISO 9001. Offerors must adhere to domestic material restrictions, including the Buy American Act and the Berry Amendment, and submit all quotes via the DIBBS portal. Payment processing is handled electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → W6QK Acc Wva

Same awarding agency

TIMKEN BEARINGS FOR TACCHI LATHE FOR WATERVLIET ARSENAL

Solicitation # W911PT27QA003

Solicitation W911PT27QA003 is a Request for Quote issued by the Watervliet Arsenal for the procurement of two tapered roller bearing full assemblies for a Tacchi Lathe. The required components are Timken Company part number LL778149-90012, consisting of cone LL778149 and cup LL778110. These lighter duty, imperial series bearings feature a 23.00 inch bore diameter, 27.00 inch outside diameter, 1.9375 inch assembly width, and an open closure type. This procurement is a total small business set-aside under NAICS code 332991, and the government intends to award a single firm fixed price purchase order to the responsible offeror providing the lowest evaluated bid that meets all material requirements. The contractor is responsible for all transportation costs to the destination in Watervliet, New York, with delivery required within 30 calendar days from the date of award. Strict adherence to marking and packaging standards is mandatory, including compliance with MIL-STD-130 and MIL-STD-129, and the provision of DoD unique identification per DFARS 252.211-7003. Inspection and acceptance will be conducted by the government within 30 days of delivery. Invoicing and receiving reports must be submitted electronically through the Wide Area WorkFlow system. All quotes must be submitted electronically to the primary point of contact, Dana Proctor, by the response deadline of October 6, 2026.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Delivery and Logistics for Cannon ContainersThis subcontract opportunity, titled Delivery and Logistics for Cannon Containers, involves the transportation of fabricated containers for prime contractors supporting projects at the Watervliet Arsenal in New York. The selected provider will be responsible for hauling containers from manufacturing facilities and ensuring their secure delivery to designated unheated storage areas on the military post. To successfully execute these requirements, the contractor must utilize heavy-duty transport vehicles and employ drivers who possess the necessary authorizations for military base access. Managed by the Department of Defense under the agency W6QK Acc Wva, this project is designated as a total Small Business Set Aside under NAICS code 484220. The solicitation was posted on September 30, 2026, with a response deadline set for October 13, 2026. All performance activities will take place in Watervliet, New York.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Fabrication of Cannon Containers (Part No. 11581100)This small business set-aside subcontract involves the fabrication of specialized containers for 155mm M776 cannons to support prime contractors on Watervliet Arsenal projects. The contractor is responsible for manufacturing the containers according to Drawing 11581100 REV C, which includes the production of First Article units. All work must adhere to quality standards QAP-APP-WVA 010301 and QAP 167917, and any wood components used must be accompanied by PM compliant wood certifications. Managed by the Department of Defense under the W6QK Acc Wva agency, the project is categorized under NAICS code 332439. Performance will take place in Watervliet, New York. The solicitation was posted on September 30, 2026, with a response deadline of October 13, 2026.

Other Metal Container Manufacturing

POSTED

DEADLINE

Cannon Containers per Drawing for Watervliet Arsenal

Solicitation # W911PT26Q137

Solicitation W911PT26Q137 is a request for quotation issued by the U.S. Army Tank-Automotive and Armaments Command at Watervliet Arsenal for the procurement of 174 Cannon Containers for 155mm M776, manufactured according to drawing 11581100 Rev C. This is a Small Business Set Aside under NAICS code 321920, and the government intends to award a single Firm Fixed Price purchase order to the lowest priced eligible offeror that meets all material requirements and responsibility criteria under FAR 9.104. Delivery is required FOB Destination to Watervliet Arsenal, New York, generally within 60 days after the contract date or 30 days after First Article Test approval. Offerors must be actively registered in the System for Award Management and possess an active JCP record to access the technical data package, as the solicitation contains militarily critical technical data. Proposals must be submitted electronically to the designated contracting officer by October 13, 2026, at 4:00 PM Eastern Time, including signed cover pages and pricing for CLINs 0001-0006. Key requirements include PM compliant wood certifications, adherence to MIL-STD-2073-1 E for packaging, and MIL-STD-130 and MIL-STD-129 for marking and labeling. First Article Testing is required for specific lots, and the government may add a 1,200 dollar testing fee to the total price for evaluation purposes if testing cannot be waived. Payment will be processed electronically via the Wide Area WorkFlow system on Net 30 terms.

Wood Container and Pallet Manufacturing

POSTED

DEADLINE

Raw Material Supply for 155mm Mandrels

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Surface Finishing for Forge Mandrels

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Heat Treatment for Forge Mandrels

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Mandrel 155mm Assembly Fabrication

POSTED

DEADLINE

Mandrels for the Watervliet Arsenal

Solicitation # W911PT26QA139

The Department of Defense, through the Watervliet Arsenal, is soliciting quotes for ten 155mm Mandrel Assemblies for a rotary forge. This total small business set-aside procurement requires the assemblies to be manufactured according to drawing G5573D Rev. A and G5507C Rev. H, incorporating specific component parts G5571F Rev. D, G5572D Rev. B, G5574C Rev. B-Item 2, and G5579B Rev. C-Item 2. The contract is a firm fixed price agreement with a delivery deadline of January 11, 2027, shipped FOB Destination to Watervliet, New York. The vendor must adhere to strict quality and marking standards, including MIL-STD-130 for unique item identification and MIL-STD-129 for shipment labeling. Required deliverables upon delivery include material, heat treat, and finish certifications, as well as detailed inspection reports. Material specifications prohibit the use of castings or merchant quality, leaded, resulfurized, or rephosphorized steels, requiring instead standard AISI grade wrought steels. Award will be based on the lowest evaluated bid that meets all material requirements and responsibility criteria, with performance risk assessed via the Supplier Performance Risk System. Invoicing must be processed electronically through the Wide Area WorkFlow system.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

Manufacture and Supply of Elevating Legs for 81MM MortarThis subcontract involves the manufacture and supply of 116 precision-engineered elevating legs for 81MM mortars to support prime contractors on US Army ACC Watervliet Arsenal projects. The fabrication process must adhere strictly to Drawing 11580032, Revision D, utilizing specialized metal fabrication and precision machining equipment. The scope of work includes the performance of First Article Testing and the delivery of all required contract data as specified by DD Form 1423. Final deliverables consist of the 116 finished elevating legs and the associated general data drawings, with performance taking place in Watervliet, New York.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Leg, Elevating, per Drawing # 11580032, Revision D, for 81MM Mortar, for the Watervliet Arsenal

Solicitation # W911PT26QA049-0001

Solicitation W911PT26QA049 is a request for the procurement of 58 elevating legs for 81MM mortars, manufactured according to Drawing 11580032, Revision D, for the Watervliet Arsenal. The government intends to make a single award based on the lowest evaluated offer that meets all material and responsibility requirements. The procurement is structured into two options: CLIN 0001, which requires first article approval, and CLIN 0002, where first article approval is waived. For CLIN 0001, the contractor must deliver two units within 120 calendar days of the award date—one unassembled without protective finishes and one fully assembled with finishes—for 100 percent inspection. The remaining 56 units are to be delivered within 90 calendar days following first article test approval. The contract is open to all offerors as the small business set-aside was removed via amendment. Technical data is export-controlled, requiring offerors to have a current DD 2345 certification on file with the Defense Logistics Information Service. Evaluation will include risk assessments via the Supplier Performance Risk System regarding item, price, and supplier performance. Key compliance requirements include adherence to NIST SP 800-171 for cybersecurity, MIL-STD-129 for marking and labeling, and the Buy American and Balance of Payments Program. All invoicing must be processed through the Wide Area WorkFlow system, with final inspection and acceptance occurring at the Watervliet Arsenal in New York. The final response deadline for this solicitation is October 8, 2026.

POSTED

DEADLINE

100% Inspection and Quality ValidationThis subcontract involves the comprehensive inspection and quality validation of rough machined forgings for prime contractors supporting US Army 105mm M20 projects. The scope of work requires the dimensional inspection of 54 units to ensure strict compliance with government Quality Assurance Plans and Drawing 12591139 Rev B. Using precision tools such as CMM, calipers, and micrometers, the contractor will perform First Article Testing validation and provide all necessary inspection reports and certifications of compliance. The project is managed by the Department of Defense through agency W6QK Acc Wva and will be performed in Watervliet, New York. Under NAICS code 541380, the contract requires adherence to rigorous government quality standards. The response deadline for this opportunity is October 23, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS