Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Technical Data and Configuration Management Support

Active

Federal

Response Deadline09/01/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires engineering support focused on configuration control, technical data packages, and obsolescence management for legacy ordnance systems, with an emphasis on sustaining operational readiness through reverse engineering when original documentation is unavailable or inadequate. The work involves managing changes to technical specifications, ensuring accurate and up-to-date data packages, and identifying, assessing, and mitigating component obsolescence risks to maintain the functionality and safety of aging military hardware. The effort is structured as a subcontract under the NAICS code 541330, indicating engineering services, and is administered by the Department of Defense through the agency FA8213 Aflcmc Ebhk. The solicitation was posted on July 22, 2026, with responses due by September 1, 2026, and performance location details are unspecified. The scope demands technical expertise in legacy systems, strong documentation practices, and the ability to reconstruct or revalidate technical information without reliance on original manufacturers or sources, ensuring continued support of critical ordnance assets.

General Info

Engineering support for legacy ordnance systems via reverse engineering, obsolescence management, and technical data control.

Agency

Department Of Defense → FA8213 Aflcmc EbhkView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

UT

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineSep 1

Submission deadline

Response Deadline

09/01/2026, 11:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8213 Aflcmc Ebhk

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8213 Aflcmc Ebhk

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Engineering support for configuration control, technical data packages (TDPs), and obsolescence management of legacy ordnance items, including reverse engineering where needed.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction initiatives across various phases including planning, design, construction, and closeout. The scope encompasses support for diverse project delivery methods such as Design Build, Progressive Design Build, and alternative delivery models, with the goal of ensuring projects adhere to established schedules, budgets, and quality standards. The contract is categorized under NAICS code 541330 and is intended for firms capable of delivering comprehensive CM services across the full lifecycle of complex infrastructure projects within the Port’s facilities. Primary point of contact for inquiries is Hala Rabbo, reachable via email or phone, with additional support available through Project Manager Ann Davidson. The contract will be administered by the Port of Seattle’s Construction Management team, though specific delivery locations are not detailed in the posting. Interested parties should monitor the official solicitation portal for future release dates, as this forecast notice indicates potential future procurement activity rather than an active open solicitation. Firms must be prepared to engage on multiple projects simultaneously, adapt to evolving project requirements, and demonstrate proven experience in managing large-scale port infrastructure initiatives.

Construction Management

POSTED

about 4 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a continuous 24/7/365 environment. The primary objectives are to identify and correct system deficiencies, enhance performance, efficiency, comfort, reliability, and longevity of mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems, while ensuring full compliance with safety and regulatory standards. All work will be executed under Service Directives in close collaboration with Aviation Facilities and Infrastructure to meet defined deliverables and operational needs. The contract is structured as an Indefinite Delivery/Indefinite Quantity (IDIQ) vehicle under NAICS code 541330, administered by the Port of Seattle’s Aviation Facilities and Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as Project Manager, both reachable through official port channels. The solicitation was posted in July 2026 and is intended for long-term, flexible service delivery without a fixed scope or dollar value. Work will be performed entirely at the airport, requiring coordination with active operations and adherence to stringent aviation safety protocols.

Aviation Facilities & Infrastructure

POSTED

about 4 hours ago

DEADLINE

Quality Assurance and Conformance TestingThe contract requires the performance of comprehensive quality assurance activities including in-process and final inspections, First Article Testing (FAT), and the issuance of Certificates of Conformance in strict alignment with Federal Acquisition Regulation 52.246-15 and Defense Logistics Agency specifications. All testing and inspection protocols must ensure full compliance with contractual and regulatory standards to confirm that delivered items meet required technical and performance criteria. The work under this subcontract is governed by NAICS code 541330 and is administered by the Strategic Acquisition Program Directorate within the Department of Defense. The contract is open for submission until August 25, 2026, and performance is expected to support defense acquisition objectives without geographic specification. Participation is subject to adherence to all DLA and federal quality assurance mandates, with no set-aside designation specified.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in about 1 month

On-Site Inspection & Quality Assurance SupportThe contract calls for independent inspection and quality assurance support to verify that completed concrete repairs at Scott Air Force Base meet all government performance work statement requirements and acceptance criteria. This work involves detailed on-site documentation and evaluation to ensure compliance with technical standards and regulatory mandates specific to military facility maintenance. The scope is focused exclusively on the verification process, not the repair execution, requiring a qualified entity to perform objective assessments and provide formal records of compliance. This is a total small business set-aside subcontract under NAICS code 541330, indicating it is restricted to small businesses as defined by the SBA. The opportunity was posted on July 24, 2026, with a deadline for responses set for August 14, 2026, at 6:00 PM. The place of performance is clearly identified as Scott Air Force Base, with a zip code of 62225, and the contracting activity is under the Department of Defense through W7M6 Uspfo Activity Ilang 126. All work must be conducted in person at the base, and proposers must be prepared to provide timely, accurate, and defensible reports on inspection findings to support government acceptance of repair work.

W7M6 Uspfo Activity Ilang 126

POSTED

about 11 hours ago

DEADLINE

Project Management & Quality AssuranceThe contract titled Project Management & Quality Assurance requires on-site supervision, quality control, inter-trade coordination, and comprehensive documentation management to ensure full compliance with inspection schedules, submittals, and as-built documentation requirements necessary for contract closeout. The work is focused on maintaining rigorous standards throughout the project lifecycle to support regulatory adherence and successful project completion. All activities must be performed at the designated place of performance in Saint Paul, Minnesota, with the zip code 55108. This is a small business set-aside subcontract under NAICS code 541330, intended exclusively for small businesses as defined by the SBA. The opportunity was posted on July 24, 2026, and responses are due by August 13, 2026. The contracting entity is the USDA ARS AFM APD under the Department of Agriculture, and the subcontractor must be prepared to manage all aspects of documentation control and coordination between trades to meet inspection and compliance deadlines without delay.

USDA Ars Afm Apd

POSTED

about 11 hours ago

DEADLINE

Evaporative Cooling System Design & EngineeringThe contract requires the provision of comprehensive mechanical engineering services for the design and replacement of evaporative cooling systems across USDA laboratory buildings, with a focus on delivering precise shop drawings, accurate load calculations, and detailed technical specifications. All work must adhere strictly to recognized industry standards including ANSI, NFPA, and USDA-specific requirements to ensure operational safety, efficiency, and regulatory compliance. The scope is centered on replacing existing systems within designated USDA facilities located in Saint Paul, Minnesota, with the successful bidder responsible for end-to-end engineering execution from initial design through documentation delivery. This subcontract is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside program, as defined by FAR 19.5, and falls under NAICS code 541330 for architectural, engineering, and related services. The opportunity was posted on July 24, 2026, with responses due by August 13, 2026, at 10:00 PM Eastern Time. The contracting activity is managed by the USDA Agricultural Research Service, specifically the Animal and Plant Health Inspection Service, with performance required on-site in Saint Paul at the zip code 55108. All deliverables must align with federal procurement guidelines and be completed within the established timeline to meet the operational needs of the USDA laboratories.

USDA Ars Afm Apd

POSTED

about 11 hours ago

DEADLINE

Architectural Engineering Services - Veterans Affairs New Medical Center San Antonio SATOCThe U.S. Army Corps of Engineers Fort Worth District is soliciting qualifications for a Single Award Task Order Contract (SATOC) to provide Architect-Engineer (A-E) services for the design and construction of a new approximately 1,400,000 gross square foot medical facility complex for the Veterans Affairs San Antonio Health Care System. The contract, identified as W9126G26RA040, is an Indefinite Delivery Contract (IDC) with a ten-year ordering period—including a five-year base and one five-year option—with a total ceiling value of $90,000,000. Work will be executed through negotiated firm-fixed-price task orders, and performance will occur primarily at the prime and subcontractor offices, with significant coordination required at the existing South Texas Veterans Affairs Health Care System in San Antonio, as well as at USACE offices in Dallas and Washington, D.C. The project site is a 59-acre undeveloped parcel north of the current hospital, owned by the San Antonio Medical Foundation, and includes the construction of a 1,325,000 GSF hospital, a 79,000 GSF administration building, a 2,500-stall parking structure, and a Central Utility Plant, along with supporting infrastructure such as vehicle circulation, stormwater management, and security systems. The design must adhere to the Department of Veterans Affairs Technical Information Library (TIL), Uniformed Facilities Criteria (UFC), and other referenced standards, with phasing strategies required to accommodate potential annual budgetary constraints. Firms must demonstrate specialized technical competence in the planning and design of large-scale healthcare facilities, collaboration with multidisciplinary teams, quality management systems (preferably ISO 9001 certified), and experience with alternative construction delivery methods such as Design-Build, Integrated Design and Construction, and Design-Build to Budget. The evaluation prioritizes professional qualifications of lead personnel across thirteen key disciplines—including project manager, architect, structural, mechanical, electrical, fire protection, civil, geotechnical, and medical planners—and requires demonstrated knowledge of local San Antonio conditions including geology, climate, and construction market dynamics. Capacity to perform multiple concurrent task orders, up to three simultaneously, is essential, and firms must provide detailed resumes and SF 330 documentation supporting experience, past performance, and team composition. Small business participation goals are defined at 8% SB, 5% SDB, 3%

W076 Endist Ft Worth

POSTED

about 11 hours ago

DEADLINE

H-T AE Load RatingThis contract is a special notice for a Small Business Set-Aside under NAICS code 541330, titled H-T AE Load Rating, solicited under number 1240LT26Q0150 by the Humboldt-Toiyabe National Forest under the U.S. Department of Agriculture. Only holders of the Department of the Interior/Fish and Wildlife Service AE MATOC are eligible to submit proposals, and all submissions must comply with this restriction—other SF-330 forms will not be considered. The work involves load rating inspections for bridges located exclusively within the Forest Service’s Intermountain Region (Region 4) in Nevada, and proposers must coordinate with designated Forest Service contacts to align inspection schedules with access availability, as detailed in the attached bridge inspection list. The solicitation was posted on July 24, 2026, with a firm response deadline of August 10, 2026, at 6:00 p.m. Eastern Time. Proposals must be submitted through the designated SAM.gov portal, and all communications should be directed to Derrick Dodson at the provided email address. The place of performance is statewide across Nevada, and the contracting office is based in Sparks, Nevada, 89431.

Humboldt-Toiyabe National Forest

POSTED

about 11 hours ago

DEADLINE

Advanced Notice for N0016426R3122The U.S. Navy’s Naval Surface Warfare Center, Crane Division, is issuing a draft advance notice for a potential solicitation under SeaPort NxG to procure professional, engineering, technical assessment, and management support services for the SWS Ashore, SLCMN, and SITP Programs. This requirement is exclusively open to current SeaPort NxG Multiple Award Contract holders, and only inquiries from these qualified entities will be accepted. The solicitation will be conducted as a full and open, unrestricted competition with no set-aside provisions, targeting specialized expertise in systems hardware and test support. All questions must be submitted by the designated deadline of July 31, 2026, at 7:00 PM Eastern Time, and while the government will review each submission, it reserves the right to not respond to all inquiries. The North American Industry Classification System code for this requirement is 541330, and performance will occur primarily at Crane, Indiana. The official solicitation number is N0016426SNB94, and the document was posted on July 24, 2026, with the primary point of contact being Bryce Jenkins, reachable via email at bryce.c.jenkins.civ@us.navy.mil or by phone at 812-381-5463. The contracting office is located at the NSWC Crane facility in Crane, Indiana, with a ZIP code of 47522-5001. This presolicitation serves solely to gather industry input to refine the final solicitation and does not constitute a commitment to award a contract. Potential offerors are encouraged to review the details on the SAM.gov portal using the provided UI link and ensure all submissions align with SeaPort NxG eligibility and timing requirements.

POSTED

about 11 hours ago

DEADLINE

Transportation Management System (Pavement)The City of Waynesboro, Virginia, is seeking qualified engineering firms to provide services for the analysis of pavement conditions and the updating of its Pavement Management System under solicitation RFP-121455. Proposals must be submitted by August 12, 2026, by 7:00 PM, and the opportunity is open to firms with expertise in transportation infrastructure assessment and data-driven pavement management solutions. This solicitation falls under NAICS code 541330, indicating it is targeted toward engineering services, and is issued by a state and local government entity with performance expected in Waynesboro, Virginia. The work will involve evaluating existing pavement conditions, collecting and analyzing relevant data, and enhancing the city’s system to support long-term maintenance planning and resource allocation. Interested parties should direct inquiries to Elizabeth Helms via email at helmsed@ci.waynesboro.va.us or phone at 540-942-6576, and all submission details and documentation can be accessed through the provided vendor portal link.

City of Waynesboro

POSTED

about 18 hours ago

DEADLINE

Seismic Valve ImprovementsThe City of Tualatin is seeking qualified engineering firms to deliver professional services for the Seismic Valve Improvements Capital Project, which involves installing automatic seismic valves on all six of its distribution system storage tanks to isolate inlets and outlets during seismic events. Proposals must strictly follow the requirements outlined in the Request for Proposals and be submitted via BidLocker by 2:00 p.m. local time on August 17, 2026; late submissions will not be accepted. Pricing information should not be included unless explicitly requested, and all proposers must comply with Oregon’s Public Contracting Code and the City’s procurement rules. The RFP documents are available for download on BidLocker or in person at the City Offices Building, and the City reserves the right to reject any proposal that does not meet prescribed procedures or to reject all proposals if deemed in the public interest. The solicitation number is 6339, and inquiries can be directed to the City’s Procurement contact.

City of Tualatin, OR

POSTED

about 23 hours ago

DEADLINE

Project Inspection, Compliance & Quality AssuranceThe contract pertains to third-party inspection and compliance verification services for projects requiring adherence to the Americans with Disabilities Act, Section 508 of the Rehabilitation Act, the National Electrical Code, and specific university standards. The scope includes systematic assessments to ensure that all facilities and systems meet accessibility, safety, and regulatory requirements, with detailed reporting provided to document findings and confirm compliance. The work is expected to involve field inspections, documentation reviews, and ongoing coordination to address deficiencies and verify corrective actions as needed. This subcontract opportunity is issued by the State of Utah under NAICS code 541330, which classifies it as architectural and engineering services, and is open for responses until August 13, 2026. The solicitation was posted on July 23, 2026, and no set-aside provisions have been designated. While the exact location of performance and point of contact details are not specified, the work is intended to support infrastructure or facility initiatives governed by Utah’s institutional and regulatory frameworks. Interested parties must submit proposals through the provided Bonfire link prior to the deadline.

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → FA8213 Aflcmc Ebhk

Same awarding agency

Cartridge and Engine Starter Component SupplyThe contract seeks qualified subcontractors to manufacture cartridges for engine starter systems used in aircraft and missile platforms, with strict requirements for handling energetic materials and ensuring operational reliability under extreme environmental conditions. The work demands high precision, adherence to defense-grade safety standards, and proven capability in producing components that function reliably under high stress, temperature variations, and dynamic launch environments. This is a subcontract opportunity under NAICS code 325920, indicating specialized chemical manufacturing relevant to defense applications. All proposals must be submitted by September 1, 2026, and the contract is issued under the Department of Defense through the FA8213 Aflcmc Ebhk office. While specific performance locations and point of contact details are not provided, the nature of the work implies stringent compliance with federal defense procurement regulations and likely requires facilities certified for classified or controlled material handling. Bidders must demonstrate technical expertise in energetic components, quality control protocols for mission-critical systems, and experience supporting aerospace or missile platforms.

Explosives Manufacturing

POSTED

DEADLINE

in about 1 month

Linear Charge Assembly SupplyThe contract requires the supply of linear shaped charges, specifically designated as SMDC LINE, intended for precision cutting or separation applications in egress systems and missile staging operations. These components must meet stringent performance tolerances to ensure reliability and safety under high-stress operational conditions, with all manufacturing, handling, and assembly procedures strictly adhering to ordnance safety and handling regulations. The work is classified as a subcontract under NAICS code 325920, indicating specialized manufacturing of other chemical products, and is issued by the Department of Defense under the agency designation FA8213 Aflcmc Ebhk. Responses are due by September 1, 2026, and the opportunity was posted on July 22, 2026, providing potential vendors approximately six weeks to prepare and submit proposals. There is no specified set-aside designation, meaning the contract is open to all qualified suppliers regardless of business size or certification status. The place of performance and point of contact details are not provided, but the work is expected to support critical defense applications, necessitating adherence to federal defense standards and secure logistical protocols throughout production and delivery.

Explosives Manufacturing

POSTED

DEADLINE

in about 1 month

Time Delay and Actuator Component ProductionThe contract mandates the manufacture of explosive actuators and precision time delay components designed for use in sequencing systems that control ejection or missile launch operations. These components must meet rigorous performance standards, including precise timing tolerances and robust reliability under extreme environmental conditions. All produced items require completion of comprehensive environmental testing to validate performance under temperature, vibration, shock, and humidity extremes typical of aerospace and defense applications. Strict lot traceability is enforced throughout the production lifecycle, ensuring every component can be tracked back to raw materials, manufacturing processes, and quality control records to support accountability and mission-critical integrity. The contract is classified as a subcontract under NAICS code 325920 and is issued by the Department of Defense through the agency FA8213 Aflcmc Ebhk. Responses must be submitted by September 1, 2026, and the solicitation was posted on July 22, 2026. No set-aside provisions are specified, and the place of performance details are not provided, indicating potential flexibility in manufacturing location provided all requirements are met. The work is mission-sensitive and must adhere to defense-grade compliance standards without public disclosure of specific technical parameters or performance metrics.

Explosives Manufacturing

POSTED

DEADLINE

in about 1 month

Explosive Initiator ManufacturingThe contract pertains to the manufacturing of precision explosive initiators, specifically M26 and EBW types, intended for use in aircraft egress and missile systems. It encompasses the full lifecycle of production including assembly, rigorous testing, and strict adherence to established ordnance safety standards to ensure reliability and operational integrity under high-stress conditions. All work must be executed in compliance with federal and military specifications governing explosive devices, with an emphasis on quality control, traceability, and safety protocols throughout each phase of development and fabrication. The contract is classified as a subcontract under NAICS code 325920, which corresponds to Other Chemical Product and Preparation Manufacturing, and is sponsored by the Department of Defense through the agency FA8213 Aflcmc Ebhk. The solicitation was posted on July 22, 2026, with a mandatory response deadline of September 1, 2026, at 11:00 PM. The place of performance and specific office address are not designated in the available data, indicating flexibility in facility location provided that all regulatory and security requirements are met. The award is intended to secure a capable and certified supplier with demonstrated expertise in sensitive explosive component production for defense applications.

Explosives Manufacturing

POSTED

DEADLINE

in about 1 month

Technical Data Licensing & Engineering SupportThe contract involves the provision of engineering support and technical data licensing for egress components, specifically addressing situations where the government does not hold data rights to critical technical information. This effort is aimed at enabling the government to effectively maintain, repair, and operate egress systems by acquiring the necessary technical data and expert engineering services previously unavailable due to inadequate data rights. The work will include development, analysis, and documentation of technical specifications and manufacturing details essential for component sustenance and lifecycle support. This subcontract is issued under the NAICS code 541330 for engineering services and is managed by the Department of Defense through the agency FA8213 Aflcmc Ebhk. The solicitation was posted on July 22, 2026, with a firm response deadline of August 7, 2026, at 10:00 PM. Although the place of performance and point of contact details are not specified, the nature of the work implies collaboration with defense systems requiring precise technical input and licensing compliance. The contract is intended to fill critical knowledge gaps in the defense supply chain, ensuring operational readiness of egress systems across military platforms.

Engineering Services

POSTED

DEADLINE

Small Business Prime/Subcontractor Teaming OpportunityThis opportunity is open to certified small businesses seeking to serve as primes or subcontractors on future contracts related to egress components, with a NAICS code of 325920 indicating the industry category. The initiative is designed to facilitate teaming arrangements that position qualified small businesses to respond to upcoming procurement needs under the Department of Defense, specifically through the FA8213 Aflcmc Ebhk office. Interested parties must submit their expressions of interest by the deadline of August 7, 2026, with no solicitation number or specific set-aside designation currently assigned, indicating this is a pre-solicitation effort to identify capable participants rather than a formal bid request. The opportunity does not specify a place of performance or point of contact, suggesting that future contract awards will determine location and liaison details. Participation is intended to build a pool of vetted small business candidates who can be rapidly mobilized when actual egress component contracts are released. While no financial or technical requirements are outlined in the posted data, certification as a small business is implied as a prerequisite. Subcontractors and primes alike are encouraged to engage early to ensure visibility within the DoD’s acquisition pipeline and to align with potential future requirements under this indefinite delivery vehicle.

Explosives Manufacturing

POSTED

DEADLINE

Canopy Remover Unit FabricationThe contract pertains to the fabrication of explosive-mechanical units designed to jettison aircraft canopies immediately prior to pilot ejection, ensuring safe egress under high-speed and high-altitude conditions. These units must meet stringent military-grade reliability and performance standards, integrating precision explosive components with robust mechanical systems to function flawlessly in extreme environmental and operational stress scenarios. The work is classified as a subcontract under NAICS code 332996, indicating specialized manufacturing activity for other primary defense contractors or government systems integrators. The solicitation was posted on July 22, 2026, with a firm response deadline of August 7, 2026, allowing potential vendors seven weeks to submit technical and compliance documentation. The contracting authority is the Department of Defense through the agency designation FA8213 Aflcmc Ebhk, though no specific office address or point of contact is provided. Performance location details remain unspecified, implying flexibility or classification of site data. The contract supports critical aviation safety systems and will likely require certified explosive handling protocols, quality assurance certifications, and adherence to DoD security and export control regulations.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Impulse Cartridge ManufacturingThe contract pertains to the manufacturing of impulse cartridges designed to generate precise gas pressure for activating ejection mechanisms in fighter aircraft, a critical component for pilot safety and emergency escape systems. This subcontract is issued under the NAICS code 325920, indicating it falls within the chemical manufacturing sector, and is administered by the Department of Defense through its agency FA8213 Aflcmc Ebhk. The solicitation was posted on July 22, 2026, with a response deadline of August 7, 2026, requiring prospective contractors to submit proposals within this timeframe. While specific performance locations and points of contact are not provided, the work is expected to support defense aviation systems with stringent technical and reliability standards. The contract does not have a set-aside designation, meaning it is open to all eligible businesses regardless of size or status.

Explosives Manufacturing

POSTED

DEADLINE

Explosive Cord Set ProductionThe contract pertains to the supply and fabrication of explosive cord sets specifically designed for severing aircraft canopies during emergency ejection sequences, ensuring crew safety under critical conditions. These components are precision-engineered to function reliably in high-stress environments and must meet stringent military performance and safety standards. The work is classified under NAICS code 325920, indicating it falls within the specialty chemical manufacturing sector, and is structured as a subcontract under the Department of Defense through the agency FA8213 Aflcmc Ebhk. The solicitation was posted on July 22, 2026, with responses required by August 7, 2026, allowing potential vendors a four-week window to submit proposals. Performance location details are not specified, but the nature of the product suggests the fabrication and delivery must align with defense installation requirements, likely involving secure handling and transport protocols for explosive materials. The absence of set-aside designation implies the opportunity is open to all qualified contractors regardless of business size or classification.

Explosives Manufacturing

POSTED

DEADLINE

Precision Energetic Initiator ManufacturingThe contract seeks a subcontractor to manufacture precision explosive initiators specifically designed for use in ejection seat and canopy egress systems on F-15, F-16, and F-22 aircraft. These components are critical safety and survival devices that must meet stringent performance, reliability, and safety standards required by military aviation operations. The work involves high-precision manufacturing processes for energetic materials, with strict adherence to defense specifications and secure handling protocols due to the hazardous nature of the materials involved. The solicitation is classified as a subcontract under NAICS code 325920, indicating it falls within the specialtychemical manufacturing sector, and is issued by the Department of Defense through the agency FA8213 Aflcmc Ebhk. The opportunity was posted on July 22, 2026, with a firm deadline for responses set for August 7, 2026, at 10:00 PM Eastern Time. No set-aside designation or location-specific performance requirements are specified, but the nature of the work implies strict security compliance and potential location constraints related to defense manufacturing facilities. All submissions must demonstrate technical capability, quality control systems, and experience with military-grade explosive initiators to be considered.

Explosives Manufacturing

POSTED

DEADLINE

FY27 CAD/PAD Sources Sought SynopsisThe U.S. Department of the Air Force, through Air Force Materiel Command at Hill Air Force Base, Utah, issued a Sources Sought Synopsis under solicitation number FA821326R3056 to gather market research information for the potential procurement of critical egress system components for F-15, F-16, and F-22 aircraft in fiscal year 2027. This notice, posted on July 22, 2026, with responses due by August 7, 2026, is not a solicitation or a request for proposals but a preliminary effort to assess industry capabilities, competition, and potential for small business participation under NAICS code 325920, which has a size standard of 750 employees. The required components include energetic and explosive items such as initiators, explosive cord sets, impulse cartridges, and canopy removers, each identified by unique Department of Defense Identification Codes and National Stock Numbers, with technical specifications controlled by third-party entities including Collins Aerospace, Nammo Defense Systems, and Pacific Scientific Energetic Materials Company. Respondents must demonstrate independent access to these proprietary technical data sets, as the government does not hold usage rights, and must prove proven experience in manufacturing, inspecting, and testing such components under stringent aerospace safety standards. All submissions must be emailed to Lauren Johnston at lauren.johnston.4@us.af.mil and must include company profile details such as CAGE Code and Unique Entity Identifier, small business status, and any teaming arrangements, with specific emphasis on participation from 8(a), SDVOSB, HUBZone, and WOSB concerns. No funding is available to support second-source qualification, and offerors must bear all costs associated with preparing their responses; reimbursement is not provided. The place of performance is fixed at Hill Air Force Base, Utah, and delivery and inspection are expected to occur there, though no formal delivery schedule, FOB terms, or payment details are specified. The synopsis explicitly excludes pricing, contract line items, award basis, or evaluation factors, as it serves only to inform future acquisition planning. Security clearances, contract clauses, packaging requirements, and invoicing procedures are not addressed, as the document contains no binding requirements but rather seeks industry input on capability, qualification, and availability to support potential future solicitations.

Explosives Manufacturing

POSTED

DEADLINE

CAD/PAD Bombers FY27 Sources SoughtThe U.S. Air Force, through the Department of Defense and specifically the FA8213 Aflcmc Ebhk office located at Hill AFB, Utah, has issued a sources sought notice under solicitation number FA821326R3057 to identify potential sources capable of supporting the FY27 requirements for CAD/PAD bombers. This solicitation is not subject to any small business set-aside and is open to all qualified contractors, with the NAICS code 325920 indicating the focus is on other miscellaneous chemical product manufacturing, likely relating to specialized components or systems integral to bomber platforms. Responses must be submitted by September 1, 2026, at 11:00 PM Eastern Time, and all inquiries and submissions should be directed to Lauren Johnston at lauren.johnston.4@us.af.mil. The notice is publicly available via the SAM.gov portal, and the anticipated performance location remains unspecified, suggesting flexibility in execution or future determination based on selected capabilities.

Explosives Manufacturing

POSTED

DEADLINE

in about 1 month