Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quarterly Vindicator IDS Maintenance

Active

Federal

Response Deadline08/24/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires quarterly maintenance services for the Vindicator Intrusion Detection System located at Otis Air National Guard Base in Buzzards Bay, Massachusetts, with tasks including diagnostic evaluations, calibration, software verification, and performance testing to ensure system reliability and compliance with operational standards. All work must be performed on a scheduled quarterly basis and is focused exclusively on maintaining the integrity and functionality of the intrusion detection system at this designated military installation. This is a small business set-aside subcontract under NAICS code 541330, meaning only eligible small businesses may bid, and it is part of the Department of Defense’s procurement efforts managed by W7NE Uspfo Activity Maang 102. The solicitation was posted on July 22, 2026, with submissions due by August 24, 2026, and performance is expected to occur on-site at the Buzzards Bay location with no alternative address specified. The contract does not include details on payment terms, duration, or specific performance metrics beyond the required maintenance activities.

General Info

Quarterly maintenance for Vindicator intrusion system at Otis Air National Guard Base, small business set-aside.

Agency

Department Of Defense → W7NE Uspfo Activity Maang 102View Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Buzzards Bay, MA, 02542, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 06:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W7NE Uspfo Activity Maang 102

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W7NE Uspfo Activity Maang 102

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform quarterly diagnostics, calibration, software checks, and performance verification on the Vindicator Intrusion Detection System at Otis ANGB.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite Delivery/Indefinite Quantity contract for a range of major construction initiatives. These services will support all phases of project delivery including planning, design, construction, and closeout for various delivery methods such as Design Build, Progressive Design Build, and other alternative delivery approaches. The contractor will be responsible for ensuring that all projects align with approved schedules, budgets, and quality standards, acting as a key partner in the successful execution of the Port’s capital improvement efforts. The contract does not specify a set-aside type and is categorized under NAICS code 541330, reflecting its focus on architectural and engineering services related to construction management. Primary point of contact for inquiries is Hala Rabbo, with additional support available from Project Manager Ann Davidson. Both can be reached via phone and email provided through the Port’s official channels. The solicitation is posted as a forecast with no solicitation number assigned yet, indicating it is an upcoming opportunity for industry engagement. There is no designated place of performance specified beyond its association with the Port of Seattle, suggesting work may occur across multiple project sites within the Port’s jurisdiction. All prospective bidders should refer to the official UI link for updated details and future solicitation releases.

Construction Management

POSTED

about 6 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a demanding 24/7/365 environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance performance, energy efficiency, occupant comfort, system reliability, and longevity while ensuring compliance with safety and regulatory standards. All work will be executed through Service Directives and coordinated closely with Aviation Facilities and Infrastructure to meet defined deliverables and operational needs. The contract is structured as an IDIQ vehicle under NAICS code 541330, managed by the Port of Seattle’s Aviation Facilities and Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as project manager; all inquiries and coordination should be directed through the provided contact information. Work will occur at the airport and is intended to support continuous, safe, and efficient operations without disruption to daily flight activities.

Aviation Facilities & Infrastructure

POSTED

about 6 hours ago

DEADLINE

PROFESSIONAL ON-CALL AIRPORT PLANNING SERVICES FOR EAST GEORGIA REGIONAL AIRPORTThe City of Swainsboro is soliciting proposals for professional on-call airport planning services to support the Airport Capital Improvement Plan at East Georgia Regional Airport. The contract seeks a qualified aviation consulting firm to provide expert planning, design, and technical advisory services as needed over the term of the agreement, ensuring alignment with federal, state, and local aviation standards. All work will be performed in Georgia and is intended to enhance the airport’s infrastructure, operations, and long-term development goals. Proposals must be submitted by August 13, 2026, and the solicitation number is PE-66723-NONST-2026-000000019. The contracting authority is the City of Swainsboro, with Jerry Cadle of Cadle Law Firm serving as the primary point of contact for inquiries, reachable via email at Jerry@cadlelawfirm.com. This is a state and local government procurement under the SLED category, and while no specific set-aside or NAICS code is listed, the solicitation is open to qualified firms with demonstrated experience in airport planning and capital improvement projects.

City of Swainsboro

POSTED

about 23 hours ago

DEADLINE

On-Call Planning, Resilience, and Community Development ServicesThe Coastal Bend Council of Governments is seeking qualified firms and multidisciplinary consultant teams to provide on-call professional services under an Indefinite Delivery/Indefinite Quantity contract for planning, resilience, community development, housing, economic development, and infrastructure planning. These services will support a wide range of local, regional, state, and federally funded initiatives across the Coastal Bend region, beginning with the preparation of a Comprehensive Plan for the City of Refugio, Texas, with additional task orders expected to serve other municipalities, counties, special districts, and grant-driven projects as funding becomes available. The solicitation aims to establish a pool of capable providers who can deliver timely, high-quality technical assistance to regional stakeholders. Firms interested in participating must submit Statements of Qualifications by the August 31, 2026 deadline, and selections will be made based on demonstrated expertise, capacity, and relevance to the anticipated scope of work. The contract is managed by the Coastal Bend Council of Governments, based in Corpus Christi, Texas, with primary point of contact Mary Afuso and Executive Director Emily Martinez available for inquiries. There is no set-aside designation, and the contract will remain open to qualified firms nationwide, with the goal of securing one or more providers to meet ongoing and future needs across the region. All submissions and correspondence must be directed through the designated contacts listed in the solicitation.

COASTAL BEND COUNCIL OF GOVERNMENTS

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Consultancy Services for Car Park and Solar Farm Integration TFACCThe Department of Correctional Services under the Government of Jamaica is seeking consultancy services to integrate a car park with a solar farm at the Tamarind Farm Adult Correctional Centre. The solicitation, identified by number 1662/267, was posted on July 24, 2026, with a response deadline of August 19, 2026, inviting qualified professionals or firms to submit proposals for comprehensive design, planning, and implementation advice regarding the co-location of parking infrastructure and renewable energy generation. The project aims to enhance sustainability and operational efficiency at the correctional facility by combining vehicle parking with photovoltaic solar energy systems, requiring expertise in civil engineering, solar energy systems, spatial planning, and government compliance standards. All work is to be performed at the Tamarind Farm site in Jamaica, with no specific set-aside provisions or NAICS code designated, and the contract is open to any eligible party meeting the technical and procedural requirements outlined in the solicitation. Proposals must be submitted through the official eProcurement portal before the deadline to be considered.

Department of Correctional Services

POSTED

about 23 hours ago

DEADLINE

PROFESSIONAL ON-CALL AIRPORT ENGINEERING, ARCHITECTURAL & CONSTRUCTION INSPECTION/ADMINISTRATION CONThe City of Swainsboro is soliciting qualified aviation consulting firms to provide on-call professional services related to the Airport Capital Improvement Plan at the East Georgia Regional Airport. The scope of work encompasses a full range of engineering, architectural, and construction inspection/administration services including project planning, geotechnical and subsurface investigations, topographic surveying, environmental assessments, preliminary and final design, bidding support, and ongoing construction oversight. The firm selected will be expected to deliver comprehensive technical expertise across all phases of airport infrastructure development, ensuring compliance with regulatory standards and efficient project execution. Responses to this solicitation must be submitted by August 13, 2026, at 5:00 PM, and the opportunity is posted under solicitation number PE-66723-NONST-2026-000000017, with a posting date of July 24, 2026. The contract is issued by the City of Swainsboro in Georgia and is intended for use by state, local, or educational entities. All inquiries and communications should be directed to Jerry Cadle at jerry@cadlelawfirm.com. The services will be performed at the East Georgia Regional Airport, and the selected vendor will be required to maintain a high standard of professionalism and technical competence in support of the airport’s long-term infrastructure goals.

City of Swainsboro

POSTED

about 24 hours ago

DEADLINE

Quality Inspection and Compliance ServicesThe contract requires third-party services to perform mechanical testing, dimensional verification, and quality assurance on U-bolt hardware to ensure adherence to implied government and industry standards before acceptance in Texas. These inspections are critical to verifying that the hardware meets required performance and safety criteria, with all work to be completed in compliance with applicable regulations without explicit written specifications. The scope is focused strictly on pre-acceptance validation to mitigate risk and ensure compatibility with state transportation infrastructure demands. Issued by the Texas Department of Transportation under NAICS code 541330, this subcontract is open for response until August 14, 2026, with a posting date of July 24, 2026. The place of performance is in Texas, though specific location details are not provided. The contract does not specify a set-aside type or point of contact, and inquiries must be directed through the public portal linked in the posting. All submissions must demonstrate capability to deliver accurate, verifiable testing results aligned with industry norms governing U-bolt reliability under load and environmental stress.

Texas Department of Transportation

POSTED

DEADLINE

Independent Quality Assurance / Owner’s Verification Firm (OVF)The contract seeks an Independent Quality Assurance / Owner’s Verification Firm to perform independent reviews and verifications of design documents, construction plans, and contractor submissions to ensure full compliance with contractual obligations and applicable regulatory standards. The firm will serve as a neutral third party tasked with validating the accuracy, completeness, and adherence of all technical and procedural elements throughout the project lifecycle, acting on behalf of the owner to mitigate risk and uphold quality expectations. This role requires deep expertise in engineering and construction standards, as well as the ability to identify discrepancies or noncompliance before they impact project delivery. The opportunity is classified as a subcontract under NAICS code 541330, which pertains to engineering services, and is issued by the Georgia office of the Department of Transportation. The solicitation was posted on July 24, 2026, with a mandatory response deadline of August 24, 2026. No specific place of performance or set-aside criteria are indicated, and while contact information is not provided in the data, interested parties must respond through the official portal linked in the solicitation. The nature of the work demands rigorous attention to detail, technical proficiency, and a proven track record in independent verification within public infrastructure projects.

Department of Transportation-2

POSTED

DEADLINE

Transportation Engineering Design ServicesThe contract seeks qualified firms to provide comprehensive civil and transportation engineering design services focused on the alignment of express lanes, modifications to interchanges, installation of signage, and geometric layout adjustments. All design work must strictly adhere to technical standards set by the Georgia Department of Transportation and the Federal Highway Administration to ensure safety, efficiency, and regulatory compliance. The scope requires detailed engineering analysis and documentation to support infrastructure improvements aimed at enhancing traffic flow and system integration within the state’s transportation network. Bidders must submit proposals by August 24, 2026, with the solicitation classified as a subcontract under NAICS code 541330 for architectural and engineering services. The contract is issued by the Georgia Department of Transportation under the agency designation Department of Transportation-2, and while specific location details are not provided, performance is expected to occur within Georgia. Interested parties can access full solicitation information through the provided state portal link, and proposals must demonstrate technical expertise, experience with state and federal transportation standards, and the ability to deliver precise, compliant engineering solutions.

Department of Transportation-2

POSTED

DEADLINE

RFQ 484-082426 GEC and OVF Services for I-75 South Express Lanes PI #0020636The Georgia Department of Transportation is soliciting proposals for General Engineering Consulting and Owner’s Verification Firm services related to the I-75 South Express Lanes project under PI number 0020636. The solicitation, identified as PE-48401-RFQ-2027-000000616, was posted on July 24, 2026, with responses due by August 24, 2026. The work will be performed entirely within the state of Georgia and encompasses technical engineering support and independent verification services to ensure compliance with project standards, safety protocols, and contractual obligations. This engagement will require qualified firms to provide expert consultation throughout the design and construction phases, including review of plans, specifications, and construction progress, as well as verification of contractor performance and adherence to state and federal regulations. The contract is open to vendors under a sole source or competitive solicitation framework with no specific set-aside designation, and all interested parties must submit proposals through the designated state procurement portal. Temekia Arnold of the Georgia Department of Transportation serves as the primary point of contact, available via phone and email for inquiries regarding technical requirements, submission guidelines, and evaluation criteria. Proposals must demonstrate relevant experience in transportation infrastructure projects, particularly with express lane systems, and a proven ability to deliver objective, real-time verification services. Contractors will be expected to maintain close coordination with state engineers and respond promptly to emerging project needs without disrupting ongoing operations.

Department of Transportation-2

POSTED

DEADLINE

Engineering & Grant Management Services for Water and Wastewater System Resiliency ProjectsThe contract seeks engineering and grant management services to enhance the resilience of water and wastewater infrastructure in Darien, Georgia, in response to the impacts of Hurricane Helene. It encompasses three key projects: upgrading the New River Road Pump Station by replacing outdated pumps, installing a reliable generator, expanding the waterproof wet well, and increasing forcemain capacity; improving the Public Works Pump Station through pump replacement, control panel upgrades, and adding a backup generator to ensure continuity during outages; and modernizing the Wastewater Treatment Plant by replacing aging equipment, adding a new headworks system for pre-treatment redundancy, repairing existing headworks, and implementing electrical improvements to reduce vulnerability to failures. These upgrades aim to strengthen system reliability, prevent service disruptions, and build long-term resilience against future extreme weather events. The solicitation, identified as PE-66435-NONST-2027-000000002, was posted by the City of Darien under the State and Local Government (SLED) category and is open for responses until August 27, 2026. Primary contact for inquiries is Amy Hitt, whose email is listed for correspondence. The work will be performed entirely within Georgia, with no specific city or ZIP code provided in the address details. The goal is to secure expert support for technical design, grant compliance, and project management to ensure efficient use of funds and successful implementation of infrastructure improvements critical to public health and environmental protection.

POSTED

DEADLINE

in about 1 month

Request for Proposal –Potash Bay Culvert, Tributary Floodplain, Shoreline Restoration and Wood Additions - Preliminary DThe Vermont Association of Conservation Districts is soliciting proposals for engineering services related to the Preliminary Design phase of a floodplain and stream restoration project situated along Potash Bay in Addison, Vermont. The work encompasses an existing conditions analysis, conceptual design plans, and a 30 percent preliminary design for two subprojects including culvert replacement, tributary floodplain restoration, shoreline stabilization, and the addition of woody debris to enhance habitat function. The project aims to improve hydrological flows, restore natural stream processes, and increase ecological resilience in a sensitive riparian area. All deliverables must align with the project development report and support future permitting and construction phases. Proposals are due by August 7, 2026, at 9:00 a.m., with the solicitation posted on July 24, 2026, under solicitation number 73982. The request is issued by the Vermont Department of Economic Development through the Vermont Association of Conservation Districts, with Rory Malone serving as the point of contact for inquiries. The work will be performed on-site in Addison, Vermont, and no set-aside provisions are specified. Interested firms must submit responses through the Vermont Business Registry portal using the provided link, ensuring compliance with all technical and procedural requirements outlined in the RFP.

Department of Economic Development

POSTED

DEADLINE

More opportunities from Department Of Defense → W7NE Uspfo Activity Maang 102

Same awarding agency

Copper Cable and Accessories for South Carolina (PSTE)The U.S. Air Force is soliciting quotes for a Total Small Business Set-Aside under FAR 19.5 for a single kit containing copper communication cables and associated accessories, identified under NAICS code 335929. This presolicitation notice, issued under RFO FAR 12.201-1(c)(2), is not a request for quotes but serves to alert qualified small businesses of an upcoming procurement opportunity with a target award date of September 2, 2026. The procurement requires brand name or equal products, and vendors must respond by August 10, 2026, to be considered. The opportunity is open exclusively to small businesses, with a minimum of three qualified sources being directly contacted for pricing and delivery information. The award will be made based on price and delivery schedule, with the sole shipping destination listed as Building 258 at 1325 S Carolina Rd, Eastover, South Carolina, 29044-5000. Official communications and inquiries should be directed to the primary point of contact, 2d Lt Nathan Staples, or the secondary contact, Annese Andrieu, at the designated email addresses and phone numbers provided.

Other Communication and Energy Wire Manufacturing

POSTED

DEADLINE

Other Communication and Energy Wire Manufacturing for Wisconsin (YAQF)The contract solicitation titled “Other Communication and Energy Wire Manufacturing for Wisconsin (YAQF)” with solicitation number W50S8026Q0027 is a 15-day presolicitation notice issued under FAR 12.201-1(c)(2) and RFO 5.1, exclusively targeting qualified small businesses under a Total Small Business Set-Aside. It seeks a single kit composed of communication cables and accessories as detailed in the attachments, with brand name or equal specifications required. The award will be based on price along with past performance and delivery date, and the anticipated award date is September 2, 2026. Responses must be submitted by August 10, 2026, and the requirement is being solicited directly from a minimum of three small business sources to satisfy statutory obligations and promote small business participation. The place of performance is Camp Douglas, Wisconsin, with deliveries to be made to 100 Independence Drive, Camp Douglas, WI 54618-5001. The notice is posted on SAM.gov and is managed by the Department of Defense through the W7NE USPFO Activity Maang 102 office, with primary point of contact 2nd Lieutenant Nathan Staples and secondary contact Mrs. Annese Andrieu.

Other Communication and Energy Wire Manufacturing

POSTED

DEADLINE

Security System Components and Spare Parts SupplyThe contract is a total small business set-aside under the SBA program for the supply of security system components and spare parts compatible with the Vindicator platform, including sensors, control panels, wiring, and access control hardware that must comply with MIL-STD-130 and DFARS regulations. All items must meet stringent federal military standards for marking, traceability, and defense acquisition compliance, ensuring full alignment with Department of Defense requirements. The work is performance-based and targeted exclusively at small business contractors, with the North American Industry Classification System code 334220 indicating the focus on electronic manufacturing services. The solicitation was posted on July 22, 2026, with a firm response deadline of August 24, 2026, at 6:00 p.m. The place of performance is specified as Buzzards Bay, Massachusetts, with a zip code of 02542, indicating the location where delivered goods will be received and integrated. The contracting activity is under the U.S. Navy’s W7NE Uspfo Activity Maang 102, part of the broader Department of Defense procurement structure. While no point of contact information is provided, bidders must submit proposals through the official SAM.gov portal linked in the posting to be considered for award.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Secure Area Upgrade in Building 104The contract entails the design and installation of comprehensive physical and electronic security enhancements in Building 104 located in Buzzards Bay, Massachusetts, under Department of Defense standards. Work includes the implementation of advanced access control systems, integration of surveillance infrastructure, and door hardening measures to ensure compliance with military security requirements. The project is classified as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the Small Business Administration, and is governed by NAICS code 238220 for electrical and other construction installation services. The solicitation was posted on July 22, 2026, with a response deadline of August 24, 2026, at 6:00 p.m. EDT. The contracting activity is managed by W7NE Uspfo Activity Maang 102, an entity within the Department of Defense, and performance is required at the specified location in Buzzards Bay with zip code 02542. All work must adhere strictly to DoD security protocols, and contractors are expected to deliver fully functional, certified systems that meet or exceed federal security benchmarks for protected facilities.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Emergency Service Response for IDS FailuresThis contract requires the provision of on-call emergency response services to address outages, false alarms, and cybersecurity alerts related to the Vindicator IDS system, with an emphasis on rapid troubleshooting and immediate restoration of system functionality. The work is critical to maintaining operational readiness and must be available around the clock to respond to incidents that could compromise security or mission success. The contract is a subcontract under a Total Small Business Set-Aside, as defined by the SBA, and falls under the NAICS code 541512 for custom computer programming services. It is issued by the Department of Defense through W7NE Uspfo Activity Maang 102, with performance required at Buzzards Bay, Massachusetts, 02542. The solicitation was posted on July 22, 2026, and responses are due by August 24, 2026, with no specific point of contact listed. This effort is focused on ensuring uninterrupted IDS operations through timely, skilled intervention during emergencies.

Computer Systems Design Services

POSTED

DEADLINE

Small Business-Compliant Subcontracting SupportThis contract is a small business set-aside for subcontracting services under the Total Small Business Set-Aside category as defined by FAR 19.5, ensuring that only small businesses are eligible to compete. The NAICS code 339113 specifies the work involves miscellaneous manufacturing, likely related to defense-specific components or equipment. Performance will occur in Buzzards Bay, Massachusetts, with a strict deadline for responses on August 4, 2026, and the opportunity was posted on July 22, 2026. The contracting activity falls under the Department of Defense through the W7NE Uspfo Activity Maang 102 office, and the agreement incorporates the accelerated payment clause FAR 52.232-40, which mandates prompt payment to subcontractors to support small business cash flow and financial stability. Compliance with these requirements is mandatory for all awarded subcontractors.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

DoD UID Marking and Data Submission ServicesThis contract requires the permanent 2D Data Matrix UID marking of Automated External Defibrillators and the subsequent submission of detailed item data to the Department of Defense’s Item Unique Identification Registry. The marking must comply with DoD standards to ensure traceability and lifetime identification of each device. All data submissions must be processed through either the Web Automated Workflow system or DD Form 1423, ensuring accurate, timely, and authenticated reporting into the official DoD database. The work is subject to strict technical and procedural guidelines to meet federal traceability and accountability requirements. The contract is structured as a small business set-aside under the SBA’s Total Small Business Set-Aside provisions, meaning only eligible small businesses may bid. It falls under NAICS code 811411, which pertains to electronic equipment repair and maintenance, indicating the work involves technical servicing and marking operations. Performance is designated for Buzzards Bay, Massachusetts, with a zip code of 02542. Proposals must be submitted by August 4, 2026, and the opportunity was publicly posted on July 22, 2026, under the auspices of the Department of Defense’s W7NE Uspfo Activity Maang 102 office. Participation requires adherence to all DoD UID policies and data integrity protocols.

Home and Garden Equipment Repair and Maintenance

POSTED

DEADLINE

Supply of CPR UNI-PADZ Universal ElectrodesThe contract seeks the supply of 15 units of CPR UNI-PADZ universal electrodes designed for compatibility with ZOLL AED devices, ensuring they meet FDA-compliant standards as medical consumables. The requirement is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively targeting small businesses as defined by the SBA, with the NAICS code 339113 indicating classification under Medical Equipment and Supplies Manufacturing. The solicitation was posted on July 22, 2026, with a response deadline of August 4, 2026, at 6:00 PM. Performance of the contract is to be carried out in Buzzards Bay, Massachusetts, with the awarding agency identified as the Department of Defense through the W7NE Uspfo Activity Maang 102 office.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Supply of ZOLL AED Plus Federal Government PackageThe contract calls for the procurement and delivery of five ZOLL AED Plus devices configured to meet Federal Government specifications, including mandatory UID marking compliance to ensure proper tracking and inventory management within defense systems. The units are required to be supplied in accordance with strict federal standards, with delivery targeted to the place of performance in Buzzards Bay, Massachusetts, under a subcontract structured as a Total Small Business Set-Aside under SBA guidelines, reserving full eligibility for small businesses as defined by the NAICS code 339113 for medical equipment manufacturing. The solicitation is hosted by the Department of Defense under the W7NE Uspfo Activity Maang 102 agency, with responses due by August 4, 2026, and the opportunity was posted on July 22, 2026, signaling a structured acquisition timeline aligned with federal procurement protocols.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Supply of ZOLL AED 3 Semi-Automatic DefibrillatorsThe contract involves the procurement and delivery of ten ZOLL AED 3 Semi-Automatic Defibrillators configured with PLUSRX, specifically designated for Department of Defense use and compliant with DoD UID marking requirements. The equipment must meet all technical and regulatory standards for military deployment, ensuring traceability and inventory control through standardized identification marks. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, allowing only small businesses to compete, and is classified under NAICS code 339113 for medical equipment and supplies manufacturing. Delivery is required to be completed at Buzzards Bay, Massachusetts, with a response deadline set for August 4, 2026, and the opportunity was posted on July 22, 2026, indicating a structured acquisition timeline for timely fulfillment.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Joint Base Pearl Harbor Hickam Fiber Optic Cable and AccessoriesThe solicitation titled Joint Base Pearl Harbor Hickam Fiber Optic Cable and Accessories under solicitation number W50S8026Q0037 is a combined procurement issued by the Department of Defense through the Office of W7NE Uspfo Activity Maang 102. It is a total small business set-aside as defined by FAR 19.5, restricted exclusively to small businesses as per SBA guidelines, with the NAICS code 335921 indicating the classification for other communication equipment manufacturing. Responses must be submitted exclusively through the Unsion Marketplace platform, and email quotes are strictly prohibited. The opportunity was posted on July 22, 2026, with a firm deadline for submissions on July 31, 2026, at 5:00 p.m. Eastern Time. The contract’s performance location is Joint Base Pearl Harbor Hickam in Hawaii, with a zip code of 96853, while the contracting office is located at Otis Air National Guard Base in Massachusetts. Primary point of contact is Brian Stutzman, reachable at 508-968-4910 or 102iw.msg.msc@us.af.mil, with secondary support available through Marketplace Support at 877-933-3243 or marketplace-support@unisonglobal.com. All submissions and details must be accessed via the official SAM.gov workspace link and the Unsion Marketplace portal.

Fiber Optic Cable Manufacturing

POSTED

DEADLINE

(102) Zoll Automated External Defibrillators (AEDs)The Massachusetts Air National Guard, through the Department of Defense, is issuing a Firm Fixed Price (FFP) contract under solicitation W50S80-26-Q-0022, amended to correct a typo and clarify shipping details, to acquire 15 Zoll Automated External Defibrillators (AEDs) to support Public Access Defibrillator requirements at federal facilities. This is a total small business set-aside under NAICS code 339112, with a size standard of 1,000 employees, and all offerors must be registered in SAM with active UEI and CAGE codes. The solicitation requires compliance with the Buy American Act, prohibits contracting with inverted domestic corporations and entities doing business with the Maduro regime or Xinjiang, and mandates adherence to strict UID marking standards under MIL-STD-130 and MIL-STD-129, including two-dimensional Data Matrix symbols with ISO/IEC 16022 ECC 200 encoding for item-level traceability. The delivery location is 158 Reilly St, Buzzards Bay, MA 02542-1001, with FOB destination CONUS terms, requiring the vendor to bear all shipping costs and risks until delivery, and performance must be completed within 30 days of delivery date. The contract includes 15 CPR Uni-Padz electrodes and two types of Zoll AED units: 10 AED 3 Semi-Automatic packages with PlusRx and five AED Plus Federal Government packages, with pricing to be submitted via the RFQ attachment and evaluated under a trade-off process where price, technical capability, past performance, and delivery schedule are considered, with technical and past performance collectively equal in value to price. All submissions must be electronic, sent via email by the August 4, 2026 deadline, with no paper copies accepted, and invoices must be submitted electronically through WAWF using approved document types. The contractor must comply with multiple FAR clauses related to child labor, human trafficking, equal opportunity, whistleblower protections, sustainable products, accelerated payments to small subcontractors, and cybersecurity reporting under 252.204-7018. Contract administration will be managed using DoDAAC codes F87700 for payment and F8M0WG for inspection and acceptance, with the government retaining responsibility for formal acceptance at the designated location.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE