Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Technical Data Package and Compliance Support

Active

Federal

Response Deadline08/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract seeks support for technical data package management focused on engineering drawings, configuration control, and adherence to DLA Master List standards and engineering change procedures. The work involves ensuring accurate, up-to-date documentation and compliance with military and defense-specific technical requirements to maintain system integrity and readiness. Performance is required at Robins Air Force Base, Georgia, with all deliverables subject to strict configuration management protocols. The contract is structured as a small business set-aside under the SBA program, specifically reserved for total small business concerns, and falls under NAICS code 541310 for engineering services. Proposals must be submitted by August 5, 2026, with the solicitation originally posted on July 28, 2026. The contracting authority is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, and the effort will support critical logistics and sustainment operations tied to Defense Logistics Agency systems.

General Info

Small business set-aside for technical data management at Robins AFB under DLA standards, due August 5, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

541310 - Architectural ServicesView NAICS

Place of Performance

ROBINS A F B, GA, 31098-1887, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide technical data package (TDP) support including engineering drawings, configuration management, and compliance with DLA Master List requirements and engineering change processes.

Similar Contracts

Same NAICS industry code

RSSP Unit 1 Fence Security Installation

Solicitation # 20260728046

The University of California, Berkeley is soliciting bids for the RSSP Unit 1 Fence Security Installation under solicitation number 20260728046, with a bid amount of $16. The solicitation was posted on July 29, 2026, and responses are due by August 17, 2026, at 7:00 PM Eastern Time. This procurement falls under NAICS code 541310, which relates to architectural, engineering, and related services, and is categorized as a state, local, or educational entity (SLED) opportunity. The work is to be performed at the Berkeley campus in California, and all inquiries should be directed to the primary point of contact, contractadmin-cp@berkeley.edu. There is no set-aside designation specified for this solicitation, and the full opportunity can be accessed via the provided online portal.

University of California, Berkeley

POSTED

about 15 hours ago

DEADLINE

Architectural and Interior Layout Design ServicesThe contract requires the provision of architectural and interior layout services to generate ANSI/BOMA-compliant floor plans, space measurements, and interior designs specifically for lease submissions to federal office space requirements. All deliverables must adhere strictly to the American National Standards Institute and Building Owners and Managers Association standards to ensure accurate and standardized accounting of usable and rentable square footage under the ABOA methodology. The work is intended to support federal compliance in leasing documentation, with a focus on precise spatial allocation and documentation that meets federal regulatory benchmarks for office space utilization. This subcontract is issued under NAICS code 541310 for architectural services and is managed by the FPAC Bus Cntr-Mgmt Svs Division within the Department of Agriculture. The place of performance is located in Derwood, and proposals must be submitted by the deadline of August 28, 2026, at 8:30 PM ET. The solicitation was posted on July 29, 2026, with no set-aside designation specified, meaning it is open to all eligible contractors. The contract does not indicate a point of contact, and all correspondence or submissions must follow the official SAM.gov portal link associated with the opportunity.

Fpac Bus Cntr-Mgmt Svs Division

POSTED

about 19 hours ago

DEADLINE

Architectural and Engineering Design ServicesThe contract seeks comprehensive architectural and engineering design services for leased federal facilities, encompassing full design documentation including construction drawings, strict adherence to ADA and building code requirements, and integration of low-voltage systems. The scope requires a thorough understanding of federal facility standards and the ability to deliver technically precise, compliant designs that support operational needs in a government context. The work is categorized under NAICS code 541310, indicating specialized professional services in architectural and engineering activities, and structured as a subcontract with no set-aside provisions specified. The opportunity was posted on July 29, 2026, with a response deadline of August 28, 2026, and the place of performance is designated as East Wenatchee. The contracting agency is the Department of Defense through the W071 Endist Seattle office. While no specific point of contact or detailed office address is provided, the contract is publicly accessible via the SAM.gov portal, and bidders must ensure their proposals meet all technical, regulatory, and timeline requirements for federal facility design projects. No set-aside status or small business preferences are indicated, suggesting the opportunity is open to all qualified entities.

W071 Endist Seattle

POSTED

about 19 hours ago

DEADLINE

Architectural Design Services for the Neighborhood Streetscape Project

Solicitation # 6292

The City of Hartford is seeking a qualified architectural firm to provide full-service design support for the Neighborhood Streetscape Project, encompassing schematic design, design development, construction documents, and construction administration, along with preliminary cost estimates. The selected firm will be responsible for coordinating closely with the City of Hartford, local business owners, and the Construction Manager, ensuring alignment with project objectives and community needs. While the architectural services are covered under this contract, the Construction Manager will be selected separately through a different request for proposal. The solicitation, numbered 6292, was posted on July 29, 2026, with responses due by August 11, 2026, and is administered by the Connecticut Department of Administrative Services Procurement Division. All work is to be performed within Connecticut, and inquiries should be directed to Susan Sheppard, the primary point of contact.

DAS Procurement

POSTED

about 20 hours ago

DEADLINE

RFP-785-2700000016-1 | RFP-904 Architect - CHFS - Upgrade Elevators, Louisville KY

Solicitation # RFP-785-2700000016-1

The contract solicitation RFP-785-2700000016-1 seeks architectural services for the upgrade of elevators at facilities under the jurisdiction of the Kentucky Cabinet for Health and Family Services in Louisville, Kentucky. The solicitation is issued by the Finance Facilities/Support Service division of the state of Kentucky and is aimed at securing qualified architectural professionals to oversee the planning and design of elevator modernization projects. The deadline for submitting responses is September 1, 2026, with the request posted on July 29, 2026, providing potential bidders adequate time to prepare comprehensive proposals. Performance of the work is expected to occur in Kentucky, with no specific city identified other than Louisville as the general location. The procurement falls under state, local, or educational government procurement and is not subject to a specific small business set-aside. Primary point of contact for inquiries is Jonathan Burmeister, reachable by phone or email, with additional support contact provided through the Finance Facilities/Support Service and the Department of Juvenile Justice. This solicitation does not specify a NAICS code, leaving scope and classification to the discretion of proposers to align with their expertise. Interested parties must submit proposals through the Kentucky Department of Administrative Services’ online portal, Advantage4, which serves as the official platform for bid submissions and related communications. The project underscores a state commitment to improving accessibility and safety in public service facilities through modern infrastructure upgrades.

Finance Facilities/Support Svc

POSTED

DEADLINE

in about 1 month

Architectural Design and Historic Preservation ServicesThe contract encompasses comprehensive architectural services for the redevelopment of the Aven Building, requiring full-cycle design support, accurate cost estimating, bid management, and construction administration. The scope emphasizes strict adherence to historic preservation standards, ensuring that all modifications and upgrades maintain the building’s cultural and architectural integrity while meeting modern functional needs. All phases of the project must align with established preservation guidelines, requiring specialized knowledge in historic building materials, techniques, and regulatory requirements. The contract is classified as a subcontract under NAICS code 541310, issued by the Mississippi Department of Finance and Administration through the agency name MPTAP. The solicitation was posted on July 28, 2026, with a response deadline of September 4, 2026. While the specific location of the Aven Building is not detailed in the provided data, performance is expected to occur at the building’s physical site. The contract seeks qualified professionals capable of delivering technically sound and historically sensitive architectural services under a subcontract structure, with no set-aside provisions specified.

POSTED

DEADLINE

in about 1 month

Independent Oversight and Quality Assurance (QA) SupportThe contract seeks an independent oversight and quality assurance provider to validate inspection integrity, review documentation, and ensure procedural consistency across multiple school construction sites operated by the Pomona Unified School District. The primary responsibilities include conducting peer reviews and compliance audits to confirm that all construction activities meet established standards, with a focus on maintaining uniformity and accountability throughout the project lifecycle. This role requires a thorough understanding of construction quality protocols and the ability to perform objective evaluations without direct involvement in the construction process. The contract is classified as a subcontract under NAICS code 541310, associated with architectural, engineering, and related services, and is tied to construction sites located in Pomona, California, with a zip code of 91766. The solicitation was posted on July 28, 2026, and responses are due by August 11, 2026, at 5:00 PM. All work must be performed in accordance with district requirements, and the selected provider will be expected to deliver impartial, data-driven assessments to support transparency and regulatory adherence across all project phases.

Pomona Unified School District

POSTED

DEADLINE

Technical Specifications & Construction Document PreparationThe contract requires the development of bid-ready construction documents and technical specifications for roofing and building envelope systems, with a strong emphasis on clarity, accuracy, and full compliance with applicable standards. The deliverables must be sufficiently detailed to support accurate bidder proposals and ensure seamless execution during construction, covering all aspects of material selection, installation methods, performance requirements, and system integration. The work must align with industry best practices and be structured to minimize ambiguity, enabling contractors to submit competitive and technically sound bids. This subcontract is issued by the Massachusetts Facilities Department under NAICS code 541310 and is targeted for performance at Old Lancaster Rd in Sudbury, Massachusetts, with a response deadline of August 19, 2026. There is no specified set-aside classification, and the opportunity is open to qualified subcontractors capable of delivering high-quality architectural and engineering documentation specifically tailored for building envelope and roofing applications. All submitted materials must meet the technical and procedural expectations of the agency, ensuring that the final documents are comprehensive enough to serve as the foundation for procurement and construction activities.

FACIL - Facilities Dept

POSTED

DEADLINE

Historic Preservation Design & Compliance ConsultingThe contract involves providing specialized design consulting services focused on roof and building envelope improvements to ensure full compliance with the Historic District Commission’s stringent requirements. This includes careful selection of materials and integration of design elements that preserve the historic character and aesthetic integrity of properties located in the designated area. The work is intended to support preservation goals while accommodating necessary upgrades, requiring deep knowledge of historic building standards and sensitivity to architectural context. The contract is classified as a subcontract under NAICS code 541310 for architectural services and is posted by the Massachusetts Facilities Department through the CommBuy platform. The response deadline is August 19, 2026, at 5:00 PM, with performance expected to occur at Old Lancaster Road in Sudbury, ZIP code 01776. The solicitation does not specify a set-aside type or point of contact, and the agency is not providing additional details beyond the performance location and compliance mandate.

FACIL - Facilities Dept

POSTED

DEADLINE

Architectural and Engineering (A/E) Design ServicesThe contract calls for comprehensive architectural and engineering design services to support the interior build-out of a U.S. Army recruiting facility, requiring full development of construction documents and strict adherence to all applicable federal codes and standards. The scope encompasses all design phases necessary to translate functional requirements into compliant, buildable plans, ensuring the facility meets the operational and safety needs of the Army’s recruiting mission. The work must align with federal procurement regulations and be executed to support timely construction without delays due to design deficiencies or noncompliance. The opportunity is posted as a subcontract under NAICS code 541310 and is managed by the Department of Defense through the W071 Endist Kansas City office. Responses are due by August 4, 2026, with the performance location identified by ZIP code 72660. The contract does not specify a set-aside type, and while no point of contact is listed, the solicitation is accessible through the official SAM.gov portal. All proposers must ensure their submission addresses the technical, regulatory, and logistical requirements associated with delivering federal government facility design services.

W071 Endist Kansas City

POSTED

DEADLINE

Architectural and Engineering Design ServicesThe contract entails the full architectural and engineering design of leased premises, encompassing all structural systems as well as mechanical, electrical, and plumbing (MEP) components, with the requirement to submit finalized plans for review and approval by RECO. The work is classified under NAICS code 541310, indicating specialized architectural and engineering services, and is structured as a subcontract opportunity managed by the Department of Defense through its W071 Endist Kansas City office. The solicitation was posted on July 28, 2026, with responses due by August 4, 2026, at 9:00 PM, and performance is expected to take place at a location identified only by the city designation of 7100, though no further geographic details are provided. The contract does not specify a set-aside type or point of contact, and the place of performance lacks complete address information.

W071 Endist Kansas City

POSTED

DEADLINE

Architectural Design ServicesArchitectural Design Services for the development of new educational facilities in Quincy, California, are being procured under a subcontract to ensure full compliance with applicable building codes, zoning regulations, and the California Environmental Quality Act. The project is administered by Plumas County and falls under NAICS code 541310 for architectural services, with the place of performance specified as the 95971 zip code. The solicitation was posted on July 28, 2026, and the project is accessible through the CEQANet portal. The work requires the design of facilities that meet all legal and environmental standards, emphasizing sustainable and regulated development within the local community.

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Solicitation # SPE4A7-26-T-599W

The contract is for one head, piston, part number 41001708 with NSN 1650-01-046-2267, to be supplied by PTI Technologies Inc, CAGE 05228, under solicitation SPE4A7-26-T-599W, with a delivery requirement of 20 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The supplier must comply with DLA packaging standards, CMMC Level 2 self-assessment, and tailored higher-level contract quality requirements applicable to both manufacturers and non-manufacturers. Inspection and acceptance must occur at origin, and non-accepted items must have all government identification removed. Physical marking of the bare item is required, and measuring and test equipment must meet specified standards. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot unless otherwise stated, and if applicable drawings or specifications define critical, major, or minor attributes, they must correspond to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size but not for acceptance criteria, which remains zero defects. The supplier must submit a source approval request with full documentation as required. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, and inquiries should be directed to Lawrence Rucker at the provided contact information.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-600M

The contract pertains to the procurement of one cable hanger with NSN 5975-01-603-7325 and part number CMS151024, supplied by JONATHAN ENGINEERED SOLUTIONS CORP., under solicitation SPE4A7-26-T-600M. Delivery is required within five days at FOB origin, with no variance allowed in quantity, and acceptance occurs at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, material codes, and unit container specifications. Marking must adhere to MIL-STD-129 with no special marking code applied, and palletization must follow DLA standards. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking processes, except for functional uses in specified items like batteries, fluorescent lamps, sensors, or naval instrument components, which must include a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and quality attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The deliverable is to be shipped to the Portsmouth Naval Shipyard in Kittery, Maine, via the fastest traceable means, explicitly excluding parcel post. The government point of contact is Tasia Carney, and the required delivery date is September 26, 2025. Technical and quality requirements referenced in the DLA Master List, including RD003, RP001, RQ011, and RQ017, are incorporated by reference, governing material handling, identification, and non-accepted supply removal. All provisions align with DoD unit of issue standards and are to be interpreted per the version of the DLA Master List effective at the solicitation issuance date. The contract is classified with a NAICS code of 335932 under the Department of Defense, and government use codes indicate specific logistics and distribution identifiers for internal tracking.

Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

PLUG, MACHINE THREAD

Solicitation # SPE4A7-26-Q-0918

The contract specifies the procurement of four machine thread plugs identified by NSN 5365-01-441-1667, with a delivery requirement of 125 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract includes stringent cybersecurity and export control obligations, requiring compliance with Cybersecurity Maturity Model Certification Level 2 and adherence to ITAR or EAR regulations for technical data, which prohibits unauthorized disclosure to foreign persons regardless of location. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization may access the controlled technical data. Additional provisions mandate specific packaging, inspection at origin, removal of government identification from non-accepted items, physical marking of bare items, and compliance with tailored quality requirements for manufacturers and non-manufacturers. The solicitation number is SPE4A7-26-Q-0918, issued on July 29, 2026, with responses due by August 5, 2026, under a federal procurement managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, and the point of contact is Renee Bynum at renee.bynum@dla.mil.

Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE4A7-26-Q-0931

This contract pertains to the procurement of 45 units of a shim identified by NSN 5365-01-579-3967 under solicitation SPE4A7-26-Q-0931, with a responsive deadline of August 6, 2026, and a delivery requirement of 175 days after order. The technical and quality standards applicable to this item are defined by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless a subsequent amendment supersedes it. The contract mandates compliance with cybersecurity requirements through CMMC Level 2 certification by a Third-Party Assessment Organization and enforces DLA packaging standards. It includes tailored higher-level quality requirements for both manufacturers and non-manufacturers, with inspection and acceptance to occur at origin. Physical identification of the item must conform to specific marking standards, and any non-accepted supplies must have government identification removed. Export control is strictly enforced on associated technical data governed by ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization from the Department of State or Commerce, and applies to foreign nationals regardless of location. Access to controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed required DOD training and obtained DLA approval. The contract is administered by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with primary contact Renee Bynum at renee.bynum@dla.mil.

Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 14 hours ago

DEADLINE

PANEL, STRUCTURAL, AI

Solicitation # SPE4A7-26-Q-0920

The contract is for one structural panel, item number 1560-01-196-4405, under solicitation SPE4A7-26-Q-0920, with a delivery deadline of 440 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions applicable based on the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions use the revision active on the RFP issue date unless a later amendment supersedes it. The item is subject to multiple DLA-specific requirements including packaging, inspection and acceptance at origin, physical identification and marking of the bare item, measurement and test equipment standards, and configuration change management through engineering change proposals. Importantly, the item is exempt from item unique identification per service customer request, and government identification must be removed from non-accepted supplies. The technical data associated with this item is subject to export controls under ITAR or EAR, requiring explicit authorization for any disclosure to foreign persons, regardless of location, and only contractors with approved JCP certification, completed training, and DLA clearance may access such data. All applicable DFARS clauses, including those governing export control and contractor responsibilities, are in effect. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with NyA Currie as the primary point of contact.

Fabricated Structural Metal Manufacturing

POSTED

about 14 hours ago

DEADLINE

HEAD, LINEAR ACTUATI

Solicitation # SPE4A7-26-T-600L

The contract covers the procurement of two units of a Head Linear Actuator with NSN 1650-01-110-0251 under solicitation SPE4A7-26-T-600L, issued by the Department of Defense through DLA. Delivery is required FOB origin within 67 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the origin, and the item is classified as a critical application requiring strict compliance with DLA’s Master List of Technical and Quality Requirements, which override any other standards. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 packaging guidelines. Sampling procedures must conform to MIL-STD-1916 or ASQ H1331 Table 1, using zero-defect acceptance criteria unless otherwise specified, with critical attributes requiring an acceptance quality level of 0.1. The item is subject to tailored higher-level quality requirements and physical identification standards, though Item Unique Identification is not mandated. The delivery destination is Tracy, CA, with transportation governed by DLA procedural notes C19 and C20. The contract includes no set-asides and is assigned NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

RETAINER, HEATING UN

Solicitation # SPE4A7-26-T-600J

The contract pertains to the procurement of two retainers for a heating unit, identified by NSN 1450-01-361-2850, under solicitation SPE4A7-26-T-600J, with a delivery requirement of 20 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, including foreign nationals within the United States or overseas, without prior authorization from the Department of State or Department of Commerce. Distribution is restricted to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally authorized by the Defense Logistics Agency to handle such data, with DFARS 252.225-7048 governing compliance. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with Lexus Henry as the primary point of contact, and bids must be submitted by August 6, 2026, under a federal procurement process with NAICS code 333924.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-599R

The contract pertains to the procurement of a HASP, HALF item identified by NSN 5342-00-316-0149, with a quantity of six units to be delivered within 20 days FOB origin. All packaging must comply with MIL-STD-2073-1E standards, including specific preservation methods, wrapping materials, unit containers, and intermediate packaging as designated by code, and marking must adhere to MIL-STD-129 without special markings. The item's technical data is available unrestricted, and sampling for quality verification follows MIL-STD-1916 or comparable zero-based plans, with attributes classified according to specified verification levels or AQLs unless otherwise defined. The technical data package references drawings dated 1972 and 1984 under part number 11655291 and is governed by the DLA Master List of Technical and Quality Requirements. Delivery is directed to a facility in Nantou County, Taiwan, with no variance permitted in quantity and inspection and acceptance occurring at the origin. The solicitation number is SPE4A7-26-T-599R, with a response deadline of August 6, 2026, and the contract falls under NAICS code 332994. The point of contact is Lexus Henry, and transportation and freight forwarding are governed by DLA procedural notes C19 and C20.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 14 hours ago

DEADLINE

ATTITUDE INDICATOR

Solicitation # SPE4A7-26-R-X975

The contract pertains to the procurement of a single Attitude Indicator identified by NSN 1680-01-657-6918, manufactured by RIEKER INSTRUMENT CO., INC. with part number 5002-R, under solicitation SPE4A7-26-R-X975, issued as a Total Small Business Set-Aside. The item is subject to a Firm Fixed Price arrangement with no variance allowed in quantity, and delivery is required within 87 days after award. Inspection and acceptance occur at the origin, and packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and marking as per MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and transportation details reference DLAD procedural notes C19 and C20. The contract incorporates technical and quality requirements from the DLA Master List, including tailored quality provisions, inspection protocols, and the requirement for zero non-conformances under a zero-based sampling plan aligned with MIL-STD-1916 or ASQ H1331, with verification levels assigned based on critical, major, and minor attributes. Cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment, and physical identification of the item must meet RQ017 marking requirements. All covered defense information is controlled under RD002, and the contractor must follow government procedures for removal of identification from non-accepted items.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 14 hours ago

DEADLINE

PLUG, MACHINE THREAD

Solicitation # SPE4A7-26-T-599Q

This contract is for the procurement of 14 units of a PLUG, MACHINE THREAD with NSN/Part Number 5365-01-490-0332, under solicitation SPE4A7-26-T-599Q, with a response deadline of August 6, 2026, and delivery expected 171 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any transfer, including disclosure to foreign persons within or outside the United States, requires prior authorization from the Department of State or Department of Commerce. Technical data associated with this item is governed by DFARS 252.225-7048, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, are permitted access. The placing organization is the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with performance location in New Cumberland, Pennsylvania, and primary point of contact Brandon Smith at brandon.1.smith@dla.mil.

Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

ARM, ACTUATING VANE

Solicitation # SPE4A7-26-T-599K

The contract pertains to the procurement of 5,059 units of an ARM, ACTUATING VANE with NSN 2840-00-199-5235, issued under solicitation SPE4A7-26-T-599K by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The item is classified as technical data subject to U.S. export control regulations, either ITAR or EAR, meaning any transfer, including electronic disclosure to foreign persons within or outside the United States, requires explicit government authorization. DFARS 252.225-7048 governs the handling of this controlled information, and access is restricted to contractors certified under the U.S./Canada Joint Certification Program who have completed mandatory DLA training and approval processes. Delivery is scheduled 547 days after award, with the place of performance located at Cherry Point, North Carolina, 28533-5040. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026, under a NAICS code 336412 indicating aircraft and missile propulsion systems manufacturing. The primary point of contact for inquiries is Mahlon Marcus, reachable via email and phone. The acquisition is designated as a federal procurement with no set-aside classification. All parties handling the technical data must comply with stringent controls to prevent unauthorized disclosure, extending to U.S. companies and their foreign subsidiaries, and DLA mandates additional verification steps before granting access to the controlled technical information.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

DUCT ASSEMBLY, AIR COND

Solicitation # SPE4A7-26-Q-0921

The contract is for the procurement of four duct assemblies for aircraft air conditioning and heating systems, identified by NSN 1660-01-138-4412, with a delivery requirement within 300 days after award. The solicitation number is SPE4A7-26-Q-0921, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with a response deadline of August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and been approved by DLA. Packaging, inspection at origin, removal of government identification from non-accepted items, and calibration of test equipment are governed by specific DLA requirements, and all delivered items must adhere to rigorous quality standards applicable to both manufacturers and non-manufacturers.

Sheet Metal Work Manufacturing

POSTED

about 14 hours ago

DEADLINE