Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Technical Data Package (TDP) & Safety Documentation Specialist

Active

Federal

Response Deadline12/04/2027, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Defense, specifically the NAVSUP Weapon Systems Support Mech, involves the preparation and submission of technical print packages and safety compliance data. The selected specialist will be responsible for developing TDP Print Packages P0005344 and P0005345 using CAD software and generating Safety Data Sheets that comply with the Globally Harmonized System. The project requires deep expertise in DoD TDP standards and GHS requirements to ensure all deliverables meet strict federal guidelines. Performance will take place in Mechanicsburg, Pennsylvania, under NAICS code 541330. The response deadline for this opportunity is December 4, 2027.

General Info

DoD subcontract for technical print packages and safety data sheets in Mechanicsburg, Pennsylvania.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

541330 - Engineering Services

Place of Performance

Mechanicsburg, PA, 17055, USA

Set-Aside

NONE

Documents

This scope was carved out of N0010427RY050.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

5 year Long-Term Contract

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Response DeadlineDec 4

Submission deadline

Response Deadline

12/04/2027, 09:00:00 PM UTCin about 1 year

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs preparation and submission of technical print packages and safety compliance data for prime contractors on NAVSUP projects. Develops TDP Print Packages P0005344 and P0005345 using CAD software and generates GHS-compliant Safety Data Sheets (SDSs). Requires expertise in DoD TDP standards and Globally Harmonized System (GHS) requirements. Delivers submitted TDP packages and SDSs.

Similar Contracts

Same NAICS industry code

GLCA 318882 - Provide Lake Access to Bullfrog Area

Solicitation # glca-318882-provide-lake-access-bullfrog-area

The GLCA 318882 project, managed by WW Clyde & Co, involves the design of lake access infrastructure in the Bullfrog Area of Utah. The scope of work includes the design of a 150-foot-wide concrete launch ramp with a 10.5% grade servicing water surface elevations between 3450 and 3700, a 16-acre asphalt parking area, and a two-lane asphalt access road connecting the parking area to US 276. This solicitation is set aside for small businesses, including SDVOSB, WOSB, HUBZone, and SDB certifications, and includes a specific Indian Small Business Economic Enterprise requirement. Interested parties must submit responses by November 12, 2026, under NAICS code 541330.

POSTED

about 5 hours ago

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Eligible firms should operate under NAICS codes related to administrative management, engineering services, computer systems design, or public relations and technical writing. Interested parties must submit their responses by November 17, 2026. Primary coordination for this opportunity is managed by Liz Jordan-Wettstein.

Aanko Technologies Inc.

POSTED

about 5 hours ago

DEADLINE

Specialized Building Condition Assessment SupportThis subcontract for Specialized Building Condition Assessment Support involves providing detailed visual inspections of building systems for prime contractors working on facility projects for the Province of British Columbia's Ministry of Environment and Parks. The scope of work focuses on evaluating interior finishes, MEP systems, security components, accessibility, and fire and life safety systems. The selected provider is responsible for documenting all identified deficiencies through photography and assigning specific statuses to various components. Final deliverables include raw inspection data, comprehensive component status lists, and supporting deficiency photographs. This opportunity is categorized under NAICS code 541330 and is based in Canada.

Ministry of Environment and Parks

POSTED

about 6 hours ago

DEADLINE

Cooper City Stormwater Master Plan (H1470 | 4673-305-P14)

Solicitation # RFQ2026-2

The City of Cooper City, Florida, issued solicitation RFQ2026-2 to secure a consultant for the development of a comprehensive, grant-compliant Stormwater Master Plan (SWMP). Funded through the FEMA Hazard Mitigation Grant Program (HMGP), the project aims to improve the understanding of existing infrastructure, identify high-risk flooding areas, and assess water-quality practices to inform long-term capital improvement planning and increase flood resiliency. The scope is divided into two primary tasks: the creation of a preliminary SWMP based on initial flood modeling and the finalization of a completed SWMP for adoption into the Local Mitigation Strategy, with a total project fee of 281,000 dollars. Proposals must be submitted via the OpenGov Procurement Portal by November 30, 2026. The selection process is points-based, evaluating team qualifications, past experience, methodology, and staffing availability, with a potential second tier involving oral presentations. Awarded consultants must adhere to strict federal and state requirements, including the Davis-Bacon Act for prevailing wages, E-Verify, and certifications regarding scrutinized companies. The contract includes mandatory compliance with FEMA and FDEM regulations, and payments are processed within 45 days of receiving a proper invoice in accordance with the Florida Local Government Prompt Payment Act.

POSTED

about 7 hours ago

DEADLINE

Public Safety Training Center Roadway and Levee

Solicitation # 2026-GEN-00109

The Hamilton County Board of Commissioners is seeking Statements of Qualifications from Architectural and Engineering firms to provide professional design and engineering services for the Roadway and Levee Repair Project at the Public Safety Training Center in Noblesville, Indiana. The scope of work includes civil, geotechnical, and environmental engineering, topographic and boundary surveying, and the preparation of federal, state, and local permit applications. The ultimate goal is the delivery of a complete Plans, Specifications, and Estimates package ready for bidding and construction. This project may be eligible for federal-aid reimbursement through the FEMA Public Assistance Program, with funding administered by the Indiana Department of Homeland Security. Selection is based on a qualifications-based method consistent with 2 CFR 200.320(b)(2)(iv) and FEMA requirements, meaning price is not a factor in the evaluation or ranking of firms. Respondents are explicitly forbidden from providing cost information in their submissions. Evaluation is based on firm qualifications and availability, past performance on related projects over the last five years, project approach and timeline, and references. Qualified firms must submit their SOQs via the County eProcurement portal by November 9, 2026. The contract incorporates strict federal compliance standards, including the Davis-Bacon Act for prevailing wages, Title VI of the Civil Rights Act, and various non-discrimination and equal employment opportunity mandates. Required submission documents include a cover letter, firm description, and several certifications, such as Non-Lobbying, Debarment and Suspension, Non-Collusion, and E-Verify affidavits. Once the most qualified firm is ranked and selected, the County will enter into negotiations to establish a fair and reasonable price.

Buildings and Grounds

POSTED

about 7 hours ago

DEADLINE

Building Inspection ServicesThis subcontract for Building Inspection Services supports prime contractors on municipal government services projects for the City of Dunwoody in Georgia. The scope of work involves reviewing building plans and performing critical structural and safety inspections across multiple construction phases, including foundation, framing, electrical, and plumbing. The selected provider is responsible for delivering building compliance reports and signed-off inspection cards to ensure all work meets required standards. Qualified candidates must hold International Code Council certifications or equivalent state or municipal licenses. The solicitation was posted on November 4, 2026, with a response deadline of December 4, 2026. This opportunity falls under NAICS code 541330, focusing on engineering services to maintain safety and regulatory compliance for city infrastructure.

City of Dunwoody

POSTED

about 7 hours ago

DEADLINE

Land Development Inspection ServicesThe Land Development Inspection Services subcontract involves performing critical inspections for prime contractors on municipal government services projects for the City of Dunwoody in Georgia. The selected provider will be responsible for verifying grading and drainage and ensuring all work adheres to established land development regulations. All findings must be reported directly to the Community Development department, with the final deliverables consisting of completed inspection reports and compliance certifications. Qualified candidates must possess professional expertise in civil engineering or land development. This opportunity was posted on November 4, 2026, with a response deadline of December 4, 2026. The project falls under NAICS code 541330, focusing on specialized engineering services to maintain the integrity and regulatory compliance of city land development projects.

City of Dunwoody

POSTED

about 7 hours ago

DEADLINE

BSL-3 Ventilation and HEPA Filter CertificationThis subcontract involves the inspection, testing, and certification of BSL-3 ventilation systems and HEPA filters for prime contractors working on California Department of Public Health facility projects. The scope of work includes HEPA filter leak testing according to IEST-RP-CC034, ventilation performance verification per ANSI Z9.14, and smoke visualization to analyze airflow patterns. All activities must strictly comply with the CDC/NIH BMBL 6th Edition guidelines, and the contractor is required to utilize aerosol photometers and HEPA leak testers to deliver final certification and APV reports. The opportunity is listed under NAICS code 541330 and was posted on November 4, 2026, with a response deadline of December 1, 2026. Interested parties can find further details through the Cal eProcure portal under event 4265/26-10300.

California Department of Public Health

POSTED

about 8 hours ago

DEADLINE

RFSOQ for Electrical Support

Solicitation # 26-196

The Tarrant Regional Water District is soliciting Statements of Qualifications for an Indefinite Delivery/Indefinite Quantity contract to provide electrical engineering support, owner's agent services, and electrical equipment acceptance testing. The scope of work is divided into functional categories, including reviewing electrical designs, providing engineering for internal maintenance and small Capital Improvement Projects, conducting energy audits, and performing acceptance testing for medium voltage cables, transformers, switchgear, VFDs, and MCCs. These services will support numerous projects across Texas, including pump stations, switching stations, and various facility improvements such as the BB1 Backup Power Project and the Waxahachie Oncor Transmission Upgrade Project. Selection is based on Qualifications-Based Selection Criteria, with scoring weighted toward the experience and qualifications of proposed personnel at 50 percent, the firm's prior experience and past performance at 30 percent, and staff commitment and schedule at 20 percent. The District may interview up to three top-ranked firms before making an award, and multiple vendors may be selected. Submissions must be limited to 16 pages and include a completed Conflict of Interest Questionnaire and confirmation of required insurance. The extended deadline for proposal submission is November 20, 2026, at 2:00 pm.

Infrastructure Engineering

POSTED

about 8 hours ago

DEADLINE

Request for Proposals for Professional Consultant Services Required for the Citywide Flow Monitoring Program Implementation - Phase 2

Solicitation # C11-22-26

The City of Hamilton has issued solicitation C11-22-26 for professional consultant services to implement Phase 2 of its Citywide Flow Monitoring Program. The selected consultant will be responsible for providing all labor, materials, supervision, and equipment necessary to install and eventually remove flow monitoring equipment at ninety sites within the city's sanitary and combined servicing areas. Key requirements include managing data quality for all data sets, providing flow monitoring deliverables, and conducting monthly site inspection and maintenance visits to ensure equipment functionality. The consultant must also provide an installation report featuring documentation and photographs for each location and restore all sites to their pre-installation condition upon demobilization. The project requires the submission of a project management plan, a project-specific health and safety plan, and traffic control plans. Mobilization and installation must begin within 30 days of the project award. Monthly invoices are to be submitted to the City's Project Manager, with Stephanie Spada serving as the Procurement Specialist. Proposals must be submitted electronically via the City's Bidding System by December 3, 2026, at 3:00 PM Hamilton time, as hardcopy submissions will not be accepted. All inquiries must be submitted through the bidding portal no later than three business days before the closing deadline.

City of Hamilton

POSTED

about 8 hours ago

DEADLINE

Snapfinger Advanced Wastewater Treatment Facility Expansion - Phase 3E - Design and Engineering Services During Construction

Solicitation # 2026-135-RFP

The County of DeKalb, Georgia, is soliciting proposals for design and engineering services for Phase 3E of the Snapfinger Advanced Wastewater Treatment Facility expansion. This project is part of a 4.27 billion dollar Capital Improvement Projects program and specifically involves adding a primary clarification unit process and replacing dewatering centrifuges. Using a design-bid-build delivery method, the selected engineer will manage five primary tasks, including a 24-month design phase with milestones at 30, 60, 90, and 100 percent completion, a 15-month bid phase, and post-construction services. The contract term is three years from the execution date. Qualified firms must be licensed in Georgia and demonstrate a track record of completing at least three projects in the last ten years at wastewater facilities with a capacity of 15 MGD or greater and a value of 25 million dollars or more. Proposals must be submitted electronically via the County's eProcurement Portal by 3:00 p.m. ET on January 20, 2027. Submissions are divided into a technical proposal, limited to 50 pages, and a separate not-to-exceed cost proposal. Evaluation is based on cost, technical qualifications, and LSBE participation, with the final award decided by the DeKalb County Board of Commissioners. The contract is subject to Davis-Bacon prevailing wage requirements and requires a one-year warranty on all work and equipment.

Purchasing & Contracting

POSTED

about 9 hours ago

DEADLINE

Infrastructure Project Planner/Technical Writer (SME)This subcontract opportunity is for an Infrastructure Project Planner and Technical Writer serving as a Subject Matter Expert for projects within the City of Bainbridge, Georgia. The selected provider will support prime contractors by developing engineering-based narratives and detailed technical specifications for municipal infrastructure improvements, specifically focusing on water, sewer, road, drainage, and natural gas systems. A primary objective of this role is to create technical scopes that demonstrate project feasibility to secure necessary grant funding. The role requires deep technical expertise in municipal utility and transportation infrastructure to deliver accurate project descriptions and cost projections. Interested parties must respond by December 8, 2026, under NAICS code 541330.

City of Bainbridge

POSTED

about 9 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

OEM Electronic Component Parts SupplierThis subcontract opportunity is for an OEM Electronic Component Parts Supplier to provide original manufacturer parts and sub-assemblies to prime contractors supporting NAVSUP Weapon Systems Support projects. The primary objective is to facilitate the repair of NIIN 015577217 through the delivery of genuine OEM replacement components. To ensure quality and safety, the supplier must provide certification of authenticity and Material Safety Data Sheets that comply with OSHA and FED STD 313 standards. Eligible candidates must hold authorized distributor status and demonstrate full compliance with the Buy American and Trade Agreements acts. This Department of Defense requirement falls under NAICS code 423830. Interested parties must submit their responses by the deadline of November 24, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

Electronic Component Repair and Modification ServicesThis subcontract for Electronic Component Repair and Modification Services involves the teardown, evaluation, repair, and modification of electronic components, specifically NIIN 015577217, for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes disassembling components to identify failures, executing repairs according to technical orders and drawings, and conducting testing to ensure OEM specifications are met. The contractor must possess the necessary testing equipment for the specified NIIN and maintain CMMC certification. All repaired components must be identified in accordance with MIL-STD-130 and packaged according to MIL-STD-2073-1. This Department of Defense opportunity falls under NAICS code 811219, with a response deadline of November 24, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

SFCC Functional Testing and Certification ServicesThe SFCC Functional Testing and Certification Services subcontract involves providing comprehensive inspection and performance testing for prime contractors on U.S. Navy SFCC projects. The scope of work requires the verification of form, fit, and function for Circuit Card Assemblies to ensure they meet strict system performance specifications. Additionally, the contractor is responsible for conducting traceability audits and producing precise material certification documents in accordance with SFCC protocols and DoDI 5230.24. Managed under the Department of Defense through the Navsup Weapon Systems Support Mech, this engagement focuses on the delivery of signed certification reports and detailed inspection results for 16 specific units. The project falls under NAICS code 541380, with a response deadline set for December 4, 2026.

Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

Manufacturing of SFCC Circuit Card AssembliesThis subcontract with the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the manufacturing and delivery of 16 certified Circuit Card Assemblies (NSN 5998-01-533-4858) for U.S. Navy shipboard system projects. The contractor is required to fabricate the cards according to TDP Version 010 and SFCC/Fly-By-Wire standards, ensuring all units meet strict SFCC certification and 100% traceability marking requirements. Operational compliance includes the implementation of SMIC codes on wrapping and adherence to MIL-STD-2073 and SPI 03950 10167 packaging standards. Due to the nature of the project, the contractor must be eligible to handle export-controlled technical data. The solicitation was posted on November 4, 2026, with a response deadline of December 4, 2026, under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supply of Specialized Nuts (NSN 5310-01-732-5082)This subcontract involves the manufacture or procurement of 256 specialized nuts for prime contractors supporting US Navy NAVSUP projects. The components must strictly adhere to NSN 5310-01-732-5082 and TDP Version 001 specifications, with a specific requirement that no mercury-containing compounds are added during production. The contractor is responsible for packaging the units according to MIL-STD-2073 and providing a Certificate of Conformance in compliance with FAR 52.246-15. All certified and packaged materials are to be delivered to designated Navy locations. This opportunity is managed under NAICS code 332722 for the Navsup Weapon Systems Support Mech within the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on projects for the Department of Defense agency Navsup Weapon Systems Support Mech. The scope of work involves providing specialized military-grade packaging, marking, and palletization to ensure all deliverables are shipping-ready. All activities must strictly adhere to established military standards, specifically MIL-STD-2073 for packaging, MIL-STD-147 for unit load palletization, and MIL-STD-130 for markings. Additionally, the contractor is responsible for implementing electrostatic discharge packaging in accordance with ANSI/ESD S20.20 using approved anti-static materials. This opportunity falls under NAICS code 488510 and was posted on November 4, 2026, with a response deadline of December 3, 2026.

Freight Transportation Arrangement

POSTED

about 16 hours ago

DEADLINE

OEM Manufacture of Inertial Measuring Units (NSN 6605-01-495-0012)This subcontract involves the OEM manufacture of Inertial Measuring Units, specifically NSN 6605-01-495-0012, for prime contractors supporting NAVSUP Weapon Systems Support projects under the Department of Defense. The manufacturer is required to produce hardware according to TDP Version O09 and design Cage Code 03956, reference 4300859, ensuring all units are marked in accordance with MIL-STD-130, REV N. Production must take place within ESD control facilities that comply with ANSI/ESD S20.20 and ISO 9001 quality systems. The contract falls under NAICS code 334511, with a response deadline set for December 3, 2026. The final deliverable consists of completed Inertial Measuring units meeting all specified technical and quality standards.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

Precision Components for Cylinder Assembly (NIIN 011107355)This subcontract involves the provision of high-tolerance metal components, specialized seals, and raw materials for cylinder assemblies under NIIN 011107355. Supporting prime contractors for the Department of Defense via the Navsup Weapon Systems Support Mech, the supplier must ensure all precision-machined sub-components strictly adhere to Technical Data Package specifications. The agreement mandates strict compliance with DFARS 252.225-7036 Buy American requirements and requires the submission of Material Safety Data Sheets per OSHA and FED STD 313 for any hazardous materials. The procurement process is categorized under NAICS code 334419, with a response deadline set for December 4, 2026.

Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

Cylinder Assembly (NIIN 011107355) Fabrication and RepairThis subcontract involves the manufacture or refurbishment of one Cylinder Assembly (NIIN 011107355) for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The scope of work includes the teardown, evaluation, and modification of the assembly in strict accordance with Technical Data Package Version 001, utilizing precision machining and cleaning equipment specialized for aerospace and naval components. The final deliverable is one new or refurbished assembly equipped with an Item Unique Identification. Compliance requirements for this project include authorized access to classified documents as specified by DD Form 254 and adherence to OSHA and FED STD 313 standards for Material Safety Data Sheets. The opportunity is categorized under NAICS code 333242 and is managed by the Department of Defense. Interested parties must respond by December 4, 2026.

Semiconductor Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supply of Mercury-Free Bonding Materials and ElastomersThis subcontract involves the supply of mercury-free bonding materials and elastomers for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work requires the delivery of high-grade mercury-free epoxy, vulcanizing agents, and vibration damping materials. To ensure compliance and safety, the provider must supply all necessary Material Safety Data Sheets and hazard warning labels to certify that the chemical agents and raw materials are mercury-free. The opportunity is categorized under NAICS code 325211 and was posted on November 4, 2026. Interested parties must submit their responses by the deadline of December 4, 2026, at 8:30 PM. This contract focuses on the procurement of certified chemical agents essential for specialized defense mechanical projects.

Plastics Material and Resin Manufacturing

POSTED

about 16 hours ago

DEADLINE

Vulcanization and Epoxy Bonding ServicesThis subcontract for Vulcanization and Epoxy Bonding Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves performing chemical bonding and curing, specifically executing vulcanization, epoxy bonding, gap filling, and vibration damping applications using specialized epoxy systems and vulcanizing presses. The final deliverable for this engagement is the completed bonded and cured Mounting Plate assembly. To ensure quality and compliance, the contractor must conduct hardness and tensile testing in accordance with MIL-PRF-81733. The contract further mandates strict adherence to process qualification and First Article Testing requirements. Interested parties should note the response deadline of December 4, 2026, for this opportunity categorized under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 16 hours ago

DEADLINE

Precision Machining of Mounting Plate ComponentsThis subcontract involves the precision machining of mounting plate components, specifically fabricating metal bases and structural components for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work requires the use of CNC milling and turning equipment to produce parts according to specific technical drawings, including 497A10012, 497A10104, 497A63201, 497A73300, and 497A73301. All deliverables must strictly adhere to TDP Version 006 dimensional tolerances and ISO 9001 quality systems. The contractor is required to use mercury-free materials to ensure the machined metal components are delivered ready for bonding. This effort falls under NAICS code 332710, with a response deadline set for December 4, 2026.

POSTED

about 16 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Design Liability and Construction Period Services

POSTED

about 16 hours ago

DEADLINE

Directed Energy Weapons (DEW) Modeling & Sensing

FA7022 Amic Det 2 Ol Patrick Pka

POSTED

about 16 hours ago

DEADLINE

in over 2 years

Packaging Engineering & Design (SPI Development)

POSTED

about 16 hours ago

DEADLINE

Engineering and Technical Services for Support Equipment Department at NAWCADLKE

Solicitation # N6833527R1000

Navair Warfare Ctr Aircraft Division

POSTED

about 16 hours ago

DEADLINE

V-22 AIRCRAFT SOFTWARE CONCURRENCY UPGRADES AND FLIGHT TRAINING DEVICE INTEGRATION

Solicitation # N6134027R0TBD

Nawc Training Systems Division

POSTED

about 16 hours ago

DEADLINE

C--Nationwide General Architect/Engineering (A/E) Professional Services MATOC IDIQ. - Stanley-Dowl.

Solicitation # 140PP027F0024

National Park Service Contracting Activity

POSTED

about 16 hours ago

DEADLINE

Architect-Engineer (A/E) Services For Long-Range Planning

Solicitation # N6893625R0024

Naval Air Warfare Center

POSTED

about 16 hours ago

DEADLINE

FEDERAL HIGHWAY ADMINISTRATION (FHWA) - EASTERN FEDERAL LANDS HIGHWAY DIVISION (EFLHD) 2027 INNOVATION DAY

Solicitation # 693C73

Federal Highway Administration

POSTED

about 16 hours ago

DEADLINE

SOURCES SOUGHT FOR INDEFINITE DELIVERY INDEFINITE QUANTITY (IDIQ) ARCHITECT AND ENGINEERING MULTIDISCIPLINE SERVICES FOR SMALL PROJECTS IN THE HAMPTON ROADS AREA OF RESPONSIBILITY PREDOMINATELY FOR NORFOLK NAVAL SHIPYARD AND NAVAL WEAPONS STATION YORKTOWN

Solicitation # N4008527R0030

Navfacsyscom Mid-Atlantic

POSTED

about 16 hours ago

DEADLINE

NAWCAD (WOLF) Airborne Systems Integration (ASI ) Division Technical/Project Management Support (TPMS)

Solicitation # N0042127R1008

Naval Air Systems Command

POSTED

about 16 hours ago

CLOSED

INDUSTRY DAY ANNOUNCEMENT (LIMA, PERU): DAY 1 — ARCHITECTURE & ENGINEERING (A/E) SERVICES

Solicitation # W51DQV27Z1CV8

W2SR Endist Caribbean(provis)

POSTED

about 16 hours ago

DEADLINE

Market Survey for E3 Services Support of C6ISR Systems

Solicitation # N65236-26-RFPREQ-LSUBP00080-0002

POSTED

about 16 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS