Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Technical Data Package (TDP) Development & Reverse Engineering Services

Active

Federal

Response Deadline07/29/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the development of a complete Technical Data Package for the Induction Compass Transmitter, encompassing all necessary engineering drawings, bill of materials, test procedures, and manufacturing specifications. This effort is to be accomplished through reverse engineering or by leveraging existing documentation, ensuring the TDP meets all functional and technical requirements without reliance on original manufacturer data. The deliverables must support full reproduction, maintenance, and support of the system by third-party manufacturers or government entities. The work is solicited as a subcontract under the NAICS code 541330 for engineering services, with performance located at Aberdeen Proving Ground, Maryland, 21005. The opportunity was posted on July 9, 2026, and responses are due by July 29, 2026, with the contracting activity under the Department of Defense, specifically DLA Land At Aberdeen. No set-aside provisions are specified, and the task is focused on technical documentation and data integrity to enable long-term sustainment and interoperability of the Induction Compass Transmitter system.

General Info

Develop TDP for Induction Compass Transmitter via reverse engineering to enable third-party reproduction and sustainment at Aberdeen Proving Ground.

Agency

Department Of Defense → DLA Land At AberdeenView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Aberdeen Proving Ground, MD, 21005, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 9

subcontract

Response DeadlineJul 29

Submission deadline

Response Deadline

07/29/2026, 09:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land At Aberdeen

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Land At Aberdeen

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Development of a complete Technical Data Package (TDP) for the Induction Compass Transmitter, including engineering drawings, bill of materials, test procedures, and manufacturing specifications, through reverse engineering or existing documentation.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction initiatives across various phases including planning, design, construction, and closeout. The scope encompasses support for diverse project delivery methods such as Design Build, Progressive Design Build, and alternative delivery models, with the goal of ensuring projects adhere to established schedules, budgets, and quality standards. The contract is categorized under NAICS code 541330 and is intended for firms capable of delivering comprehensive CM services across the full lifecycle of complex infrastructure projects within the Port’s facilities. Primary point of contact for inquiries is Hala Rabbo, reachable via email or phone, with additional support available through Project Manager Ann Davidson. The contract will be administered by the Port of Seattle’s Construction Management team, though specific delivery locations are not detailed in the posting. Interested parties should monitor the official solicitation portal for future release dates, as this forecast notice indicates potential future procurement activity rather than an active open solicitation. Firms must be prepared to engage on multiple projects simultaneously, adapt to evolving project requirements, and demonstrate proven experience in managing large-scale port infrastructure initiatives.

Construction Management

POSTED

about 5 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a continuous 24/7/365 environment. The primary objectives are to identify and correct system deficiencies, enhance performance, efficiency, comfort, reliability, and longevity of mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems, while ensuring full compliance with safety and regulatory standards. All work will be executed under Service Directives in close collaboration with Aviation Facilities and Infrastructure to meet defined deliverables and operational needs. The contract is structured as an Indefinite Delivery/Indefinite Quantity (IDIQ) vehicle under NAICS code 541330, administered by the Port of Seattle’s Aviation Facilities and Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as Project Manager, both reachable through official port channels. The solicitation was posted in July 2026 and is intended for long-term, flexible service delivery without a fixed scope or dollar value. Work will be performed entirely at the airport, requiring coordination with active operations and adherence to stringent aviation safety protocols.

Aviation Facilities & Infrastructure

POSTED

about 5 hours ago

DEADLINE

Quality Assurance and Conformance TestingThe contract requires the performance of comprehensive quality assurance activities including in-process and final inspections, First Article Testing (FAT), and the issuance of Certificates of Conformance in strict alignment with Federal Acquisition Regulation 52.246-15 and Defense Logistics Agency specifications. All testing and inspection protocols must ensure full compliance with contractual and regulatory standards to confirm that delivered items meet required technical and performance criteria. The work under this subcontract is governed by NAICS code 541330 and is administered by the Strategic Acquisition Program Directorate within the Department of Defense. The contract is open for submission until August 25, 2026, and performance is expected to support defense acquisition objectives without geographic specification. Participation is subject to adherence to all DLA and federal quality assurance mandates, with no set-aside designation specified.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

in about 1 month

On-Site Inspection & Quality Assurance SupportThe contract calls for independent inspection and quality assurance support to verify that completed concrete repairs at Scott Air Force Base meet all government performance work statement requirements and acceptance criteria. This work involves detailed on-site documentation and evaluation to ensure compliance with technical standards and regulatory mandates specific to military facility maintenance. The scope is focused exclusively on the verification process, not the repair execution, requiring a qualified entity to perform objective assessments and provide formal records of compliance. This is a total small business set-aside subcontract under NAICS code 541330, indicating it is restricted to small businesses as defined by the SBA. The opportunity was posted on July 24, 2026, with a deadline for responses set for August 14, 2026, at 6:00 PM. The place of performance is clearly identified as Scott Air Force Base, with a zip code of 62225, and the contracting activity is under the Department of Defense through W7M6 Uspfo Activity Ilang 126. All work must be conducted in person at the base, and proposers must be prepared to provide timely, accurate, and defensible reports on inspection findings to support government acceptance of repair work.

W7M6 Uspfo Activity Ilang 126

POSTED

about 12 hours ago

DEADLINE

Project Management & Quality AssuranceThe contract titled Project Management & Quality Assurance requires on-site supervision, quality control, inter-trade coordination, and comprehensive documentation management to ensure full compliance with inspection schedules, submittals, and as-built documentation requirements necessary for contract closeout. The work is focused on maintaining rigorous standards throughout the project lifecycle to support regulatory adherence and successful project completion. All activities must be performed at the designated place of performance in Saint Paul, Minnesota, with the zip code 55108. This is a small business set-aside subcontract under NAICS code 541330, intended exclusively for small businesses as defined by the SBA. The opportunity was posted on July 24, 2026, and responses are due by August 13, 2026. The contracting entity is the USDA ARS AFM APD under the Department of Agriculture, and the subcontractor must be prepared to manage all aspects of documentation control and coordination between trades to meet inspection and compliance deadlines without delay.

USDA Ars Afm Apd

POSTED

about 12 hours ago

DEADLINE

Evaporative Cooling System Design & EngineeringThe contract requires the provision of comprehensive mechanical engineering services for the design and replacement of evaporative cooling systems across USDA laboratory buildings, with a focus on delivering precise shop drawings, accurate load calculations, and detailed technical specifications. All work must adhere strictly to recognized industry standards including ANSI, NFPA, and USDA-specific requirements to ensure operational safety, efficiency, and regulatory compliance. The scope is centered on replacing existing systems within designated USDA facilities located in Saint Paul, Minnesota, with the successful bidder responsible for end-to-end engineering execution from initial design through documentation delivery. This subcontract is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside program, as defined by FAR 19.5, and falls under NAICS code 541330 for architectural, engineering, and related services. The opportunity was posted on July 24, 2026, with responses due by August 13, 2026, at 10:00 PM Eastern Time. The contracting activity is managed by the USDA Agricultural Research Service, specifically the Animal and Plant Health Inspection Service, with performance required on-site in Saint Paul at the zip code 55108. All deliverables must align with federal procurement guidelines and be completed within the established timeline to meet the operational needs of the USDA laboratories.

USDA Ars Afm Apd

POSTED

about 12 hours ago

DEADLINE

Architectural Engineering Services - Veterans Affairs New Medical Center San Antonio SATOCThe U.S. Army Corps of Engineers Fort Worth District is soliciting qualifications for a Single Award Task Order Contract (SATOC) to provide Architect-Engineer (A-E) services for the design and construction of a new approximately 1,400,000 gross square foot medical facility complex for the Veterans Affairs San Antonio Health Care System. The contract, identified as W9126G26RA040, is an Indefinite Delivery Contract (IDC) with a ten-year ordering period—including a five-year base and one five-year option—with a total ceiling value of $90,000,000. Work will be executed through negotiated firm-fixed-price task orders, and performance will occur primarily at the prime and subcontractor offices, with significant coordination required at the existing South Texas Veterans Affairs Health Care System in San Antonio, as well as at USACE offices in Dallas and Washington, D.C. The project site is a 59-acre undeveloped parcel north of the current hospital, owned by the San Antonio Medical Foundation, and includes the construction of a 1,325,000 GSF hospital, a 79,000 GSF administration building, a 2,500-stall parking structure, and a Central Utility Plant, along with supporting infrastructure such as vehicle circulation, stormwater management, and security systems. The design must adhere to the Department of Veterans Affairs Technical Information Library (TIL), Uniformed Facilities Criteria (UFC), and other referenced standards, with phasing strategies required to accommodate potential annual budgetary constraints. Firms must demonstrate specialized technical competence in the planning and design of large-scale healthcare facilities, collaboration with multidisciplinary teams, quality management systems (preferably ISO 9001 certified), and experience with alternative construction delivery methods such as Design-Build, Integrated Design and Construction, and Design-Build to Budget. The evaluation prioritizes professional qualifications of lead personnel across thirteen key disciplines—including project manager, architect, structural, mechanical, electrical, fire protection, civil, geotechnical, and medical planners—and requires demonstrated knowledge of local San Antonio conditions including geology, climate, and construction market dynamics. Capacity to perform multiple concurrent task orders, up to three simultaneously, is essential, and firms must provide detailed resumes and SF 330 documentation supporting experience, past performance, and team composition. Small business participation goals are defined at 8% SB, 5% SDB, 3%

W076 Endist Ft Worth

POSTED

about 12 hours ago

DEADLINE

H-T AE Load RatingThis contract is a special notice for a Small Business Set-Aside under NAICS code 541330, titled H-T AE Load Rating, solicited under number 1240LT26Q0150 by the Humboldt-Toiyabe National Forest under the U.S. Department of Agriculture. Only holders of the Department of the Interior/Fish and Wildlife Service AE MATOC are eligible to submit proposals, and all submissions must comply with this restriction—other SF-330 forms will not be considered. The work involves load rating inspections for bridges located exclusively within the Forest Service’s Intermountain Region (Region 4) in Nevada, and proposers must coordinate with designated Forest Service contacts to align inspection schedules with access availability, as detailed in the attached bridge inspection list. The solicitation was posted on July 24, 2026, with a firm response deadline of August 10, 2026, at 6:00 p.m. Eastern Time. Proposals must be submitted through the designated SAM.gov portal, and all communications should be directed to Derrick Dodson at the provided email address. The place of performance is statewide across Nevada, and the contracting office is based in Sparks, Nevada, 89431.

Humboldt-Toiyabe National Forest

POSTED

about 12 hours ago

DEADLINE

Advanced Notice for N0016426R3122The U.S. Navy’s Naval Surface Warfare Center, Crane Division, is issuing a draft advance notice for a potential solicitation under SeaPort NxG to procure professional, engineering, technical assessment, and management support services for the SWS Ashore, SLCMN, and SITP Programs. This requirement is exclusively open to current SeaPort NxG Multiple Award Contract holders, and only inquiries from these qualified entities will be accepted. The solicitation will be conducted as a full and open, unrestricted competition with no set-aside provisions, targeting specialized expertise in systems hardware and test support. All questions must be submitted by the designated deadline of July 31, 2026, at 7:00 PM Eastern Time, and while the government will review each submission, it reserves the right to not respond to all inquiries. The North American Industry Classification System code for this requirement is 541330, and performance will occur primarily at Crane, Indiana. The official solicitation number is N0016426SNB94, and the document was posted on July 24, 2026, with the primary point of contact being Bryce Jenkins, reachable via email at bryce.c.jenkins.civ@us.navy.mil or by phone at 812-381-5463. The contracting office is located at the NSWC Crane facility in Crane, Indiana, with a ZIP code of 47522-5001. This presolicitation serves solely to gather industry input to refine the final solicitation and does not constitute a commitment to award a contract. Potential offerors are encouraged to review the details on the SAM.gov portal using the provided UI link and ensure all submissions align with SeaPort NxG eligibility and timing requirements.

POSTED

about 12 hours ago

DEADLINE

Transportation Management System (Pavement)The City of Waynesboro, Virginia, is seeking qualified engineering firms to provide services for the analysis of pavement conditions and the updating of its Pavement Management System under solicitation RFP-121455. Proposals must be submitted by August 12, 2026, by 7:00 PM, and the opportunity is open to firms with expertise in transportation infrastructure assessment and data-driven pavement management solutions. This solicitation falls under NAICS code 541330, indicating it is targeted toward engineering services, and is issued by a state and local government entity with performance expected in Waynesboro, Virginia. The work will involve evaluating existing pavement conditions, collecting and analyzing relevant data, and enhancing the city’s system to support long-term maintenance planning and resource allocation. Interested parties should direct inquiries to Elizabeth Helms via email at helmsed@ci.waynesboro.va.us or phone at 540-942-6576, and all submission details and documentation can be accessed through the provided vendor portal link.

City of Waynesboro

POSTED

about 19 hours ago

DEADLINE

Seismic Valve ImprovementsThe City of Tualatin is seeking qualified engineering firms to deliver professional services for the Seismic Valve Improvements Capital Project, which involves installing automatic seismic valves on all six of its distribution system storage tanks to isolate inlets and outlets during seismic events. Proposals must strictly follow the requirements outlined in the Request for Proposals and be submitted via BidLocker by 2:00 p.m. local time on August 17, 2026; late submissions will not be accepted. Pricing information should not be included unless explicitly requested, and all proposers must comply with Oregon’s Public Contracting Code and the City’s procurement rules. The RFP documents are available for download on BidLocker or in person at the City Offices Building, and the City reserves the right to reject any proposal that does not meet prescribed procedures or to reject all proposals if deemed in the public interest. The solicitation number is 6339, and inquiries can be directed to the City’s Procurement contact.

City of Tualatin, OR

POSTED

about 24 hours ago

DEADLINE

Project Inspection, Compliance & Quality AssuranceThe contract pertains to third-party inspection and compliance verification services for projects requiring adherence to the Americans with Disabilities Act, Section 508 of the Rehabilitation Act, the National Electrical Code, and specific university standards. The scope includes systematic assessments to ensure that all facilities and systems meet accessibility, safety, and regulatory requirements, with detailed reporting provided to document findings and confirm compliance. The work is expected to involve field inspections, documentation reviews, and ongoing coordination to address deficiencies and verify corrective actions as needed. This subcontract opportunity is issued by the State of Utah under NAICS code 541330, which classifies it as architectural and engineering services, and is open for responses until August 13, 2026. The solicitation was posted on July 23, 2026, and no set-aside provisions have been designated. While the exact location of performance and point of contact details are not specified, the work is intended to support infrastructure or facility initiatives governed by Utah’s institutional and regulatory frameworks. Interested parties must submit proposals through the provided Bonfire link prior to the deadline.

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land At Aberdeen

Same awarding agency

Market Survey for the procurement of NSN 2910-01-368-7644, 2910-01-373-2591, 2910-01-368-9883 (GOVERNOR, DIESEL ENG;) for TQG-Engine Fuel System Components.The Defense Logistics Agency-Aberdeen is conducting a market survey to identify capable sources for the procurement of three diesel engine governor parts—NSNs 2910-01-368-7644, 2910-01-368-9883, and 2910-01-373-2591—used in the Tactical Quiet Generator (TQG) fuel system. These governors are critical components supporting TQG diesel generator sets that provide reliable, low-noise electrical power for military operations in austere environments, including command posts, communications, and weapon systems. The government requires these parts for initial production with estimated quantities of 105, 7, and 7 units respectively, but does not hold the technical data package and has not procured these items since 2014, indicating a need to reestablish supply sources. Responses are requested from manufacturers or suppliers who can demonstrate the ability to produce or supply the specified governors, including their part numbers 8270-1002 and 664543C, with CAGE code 31361. Submitters must provide documentation on past performance, test results, technical drawings, data rights, and prior government or commercial contracts, along with their company name, CAGE code, and technical contact information. This notice is strictly for market research and planning purposes, with no commitment to award a contract or reimburse response costs. Responses are due by August 7, 2026, and must be submitted via email to the designated technical and small business contacts; no phone inquiries are accepted. The information gathered will assess industry capability, support acquisition strategy decisions, and determine potential for competitive or small business set-aside contracts.

Other Engine Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

Test Equipment and Quality Verification Support

Testing Laboratories and Services

POSTED

DEADLINE

Obsolescence Management & Engineering Support

Engineering Services

POSTED

DEADLINE

Optical Alignment Sleeve Supply

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Precision Hand Tool Supply (Miniature Screwdriver & Needle-Nose Pliers)

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

Fiber Optic Cleaning Kit Manufacturing and Assembly

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE

Sources Sought Announcement for Enhanced Position Location Reporting System (EPLRS) ComponentsThe Defense Logistics Agency-Aberdeen is conducting a sources sought announcement to identify qualified manufacturers capable of producing the battery case assembly part number A3159263, NSN 6160-01-348-2410, which supports the Enhanced Position Location Reporting System (EPLRS). This component houses the lithium-ion BA1372/U primary battery and is critical to the EPLRS’s secure, jam-resistant tactical communications capability. The Government possesses the full technical data package (TDP) for the part, including level 3 production information, and intends to release it to qualified respondents under strict controls due to its classification under International Traffic in Arms Regulations (ITAR). To access the TDP, potential suppliers must be active in the Defense Logistics Agency Joint Certification Program (JCP), hold an approved DD2345 form, submit a completed and signed Non-Disclosure Agreement, and provide verification of their CAGE code in the System for Award Management. The TDP release process requires submission of requests within seven days of the announcement posting to DLA.Aberdeen.SourcesSought@dla.mil, and the data custodian and NDA signatory must be the same individual. The Government is evaluating industry capability to determine whether this acquisition can be competed broadly or set aside for small businesses, with responses due by July 14, 2026, and must be submitted exclusively via email to Joseph W. Frye or Jacob Sparr. No phone inquiries are permitted. Respondents are required to include their company name, CAGE code, DUNS number, technical point of contact details, completed questionnaire, evidence of First Article Testing capabilities or results, and information on prior government contracts. This announcement is strictly for planning and market research and does not constitute a solicitation, request for proposal, or commitment to award a contract, nor will the Government reimburse any costs incurred in preparing responses.

Battery Manufacturing

POSTED

DEADLINE

Market Survey for Procurement of Spares in Support of the Secure Mobile Anti-Jam Reliable Tactical (SMART-T) Program.

POSTED

DEADLINE

Afocal Objective Lens ModulesDLA Land at Aberdeen, under the Department of Defense, anticipates issuing a Request for Quote under solicitation number SPRBL1-26-R-A001 for 80 Objective Lens Modules with NSN 6650-01-676-1468 and part number 6439506-1 to support organic repair operations at Tobyhanna Army Depot in Pennsylvania. The contract will be awarded under NAICS code 333310, with delivery required FOB Destination and inspection and acceptance to occur at origin, though accelerated delivery without additional cost to the government is encouraged. The sole designated delivery point for the duration of the contract is Tobyhanna, PA, with the specific schedule to be detailed in the final solicitation. This procurement is not set aside for small businesses and is being managed by the DLA Weapons Support Aberdeen office located in Aberdeen Proving Ground, Maryland. Primary point of contact is Shawn Lyttle, reachable via email or phone, with Kyle White as the secondary contact for further inquiries. The presolicitation notice was posted on July 22, 2026, and all proposals must be submitted through the designated SAM.gov portal.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Obsolescence Management & Sustainment SupportThe contract seeks comprehensive obsolescence mitigation strategies for the Induction Compass Transmitter, a critical component within defense systems, focusing on ensuring long-term operational viability amid aging hardware and supply chain challenges. Key requirements include identifying and qualifying alternative sources for components, implementing viable substitutions without compromising performance or interoperability, and developing robust life-cycle management plans that extend the system’s serviceable life. The contractor must establish sustainable sustainment pathways that address foreseeable obsolescence risks, maintain technical documentation, and coordinate with military stakeholders to ensure seamless integration and continued readiness. This subcontract, issued by the Department of Defense through DLA Land at Aberdeen Proving Ground, targets a specific technical domain vital to navigation and targeting systems, with performance centered at Aberdeen Proving Ground, Maryland. The solicitation is open for responses through July 29, 2026, under NAICS code 541690, which covers other scientific and technical consulting services. The effort demands deep expertise in defense electronics lifecycle management, supply chain resilience, and military system sustainment, requiring proven experience in navigating legacy defense hardware obsolescence while delivering solutions that meet stringent military standards and readiness requirements.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Precision Electromechanical Component Manufacturing – Induction Compass TransmitterThe contract pertains to the manufacture or supply of the Induction Compass Transmitter, identified by NSN 6605-00-531-2992 and part number 664543C, a high-reliability electromechanical device critical to defense navigation systems. This component detects Earth’s magnetic flux and transmits precise data to a compass indicator, ensuring accurate directional sensing in military applications. The work is classified under NAICS code 334519, indicating it falls within the miscellaneous electronic component manufacturing sector, and is structured as a subcontract. Performance is required at Aberdeen Proving Ground, Maryland, with a zip code of 21005, and the contracting activity is managed by DLA Land At Aberdeen under the Department of Defense. The solicitation was posted on July 9, 2026, with a firm response deadline of July 29, 2026, at 9:00 PM Eastern Time. No set-aside type or special procurement preferences are specified, meaning the opportunity is open to all eligible subcontractors capable of meeting the technical and quality demands of this defense-critical component.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Market Survey for the procurement of NSN 6605-00-531-2992 (T-611/ASN Induction Compass Transmitter) on the Gyroscope Displacement systemThe U.S. Department of Defense, through the Defense Logistics Agency-Aberdeen, is conducting a sources-sought announcement to identify potential suppliers capable of providing the Induction Compass Transmitter, NSN 6605-00-531-2992, which supports the Gyroscope Displacement system. This component functions as a transmitter that detects the earth’s magnetic line of flux and converts it into electrical signals for use by control systems or remote compass indicators. The Army estimates an initial production requirement of 56 units, though these quantities are subject to change and are not binding. The Government currently lacks the technical data package for this part and will not release any drawings or specifications. The item was last procured in September 2025 under delivery order SPRBL125F0149 for 20 units, with a CAGE code of 56232 and part number 664543C. Respondents are invited to voluntarily submit information demonstrating their ability to manufacture or supply this part or a substantially similar item, including documentation such as questionnaires, test results, prior government or commercial contract history, data rights, and other relevant performance data. Responses must include the company name, CAGE code, and a technical point of contact with email and telephone details. This announcement is not a solicitation, does not commit the Government to any award, and will not reimburse costs associated with preparing submissions. The Government intends to use the responses to assess market capability, determine competitiveness, and inform future acquisition strategy, including potential small business set-asides. All submissions are due by July 29, 2026, and must be sent via email to the designated technical and small business contacts; no phone inquiries will be accepted. Future procurement actions, if any, will be formally announced on SAM.gov.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE