Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Technical Reporting and Performance Monitoring Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Health And Human Services → Billings Area Indian Health SvcView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Browning, MT, 59417, USA

Set-Aside

BICiv

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 18

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Health And Human Services → Billings Area Indian Health Svc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Health And Human Services → Billings Area Indian Health Svc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Generate and submit service reports including XpertCheck inspections, maintenance logs, uptime metrics (target: 98%), and corrective action documentation in compliance with federal clinical standards.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 6 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.

Aviation Facilities & Infrastructure

POSTED

about 6 hours ago

DEADLINE

Engineering Design and Technical Data ConformanceThe contract requires technical expertise to ensure that manufactured defense components fully comply with the latest revision of technical data, encompassing detailed drawing validation, reverse engineering of existing parts, and design support services. This work is critical to maintaining operational integrity and adherence to defense specifications, where even minor deviations can compromise performance or safety. Contractors must possess the capability to interpret complex engineering documentation and apply precise methods to bring components into full conformance with current standards. The opportunity is structured as a subcontract under NAICS code 541330, indicating professional, scientific, and technical services related to engineering. It is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with a response deadline of September 3, 2026, and was posted on August 3, 2026. There is no specified set-aside classification or geographic restriction for performance location, suggesting broad eligibility for qualified subcontractors operating in support of national defense systems. All proposals must demonstrate proven experience in defense-related technical data conformance and engineering validation.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

in about 1 month

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is inviting qualified small and disadvantaged businesses, including DBE, SBE, WBE, MBE, and other certified firms, to submit qualifications for participation in the Corydon Well Replacement Design Project under Elsinore Valley Municipal Water District, located in Riverside County and Southern California. The scope of work encompasses a broad range of professional services such as engineering, environmental analysis, surveying, geotechnical studies, permitting, public outreach, and utility location, with relevant NAICS codes covering architecture, engineering, and specialized technical services. The project emphasizes inclusion and compliance with SBA set-asides for Small Business, Small Disadvantaged Business, Women-Owned Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, as well as DBE status under the Department of Transportation. Firms interested in participating must contact Charlie Brown at charles.brown@ghd.com by August 7, 2026, to request solicitation documents and submit their qualifications package. The deadline to receive all solicitation materials is 5 p.m. PST on Friday, August 14, 2026, with a final response deadline of September 15, 2026. All work is expected to be performed within California, and participation is open to firms certified under federal and state disadvantaged business programs. The opportunity is advertised through the SBA’s opportunity portal, ensuring alignment with federal small business procurement goals.

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Engineering Design Services

Solicitation # engineering-design-services

The contract seeks engineering design services to develop detailed drawings required for the installation of a lifeboat davit on an existing pier located in Oregon. The project involves providing technical specifications and plans that ensure safe and compliant integration of the davit system with the current pier structure, adhering to applicable maritime and safety standards. All deliverables must be submitted by the deadline of August 6, 2026, and the solicitation is restricted to small business entities including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses as defined by the SBA. The contracting agency is the Tongue Point Job Corps, operating under NAICS code 541330 for architectural and engineering services. The primary point of contact for inquiries is Elizabeth Williamson, reachable via email at williamson.elizabeth@jobcorps.org or by phone at 503-338-5014. The work will be performed on-site in Oregon, though no specific city or zip code is provided. This solicitation is posted under the SBA’s opportunity portal and does not include a physical office address, reflecting its administrative nature. Proposals must demonstrate technical capability to deliver accurate, buildable engineering drawings that meet all regulatory and operational requirements for maritime safety equipment installation.

Tongue Point Job Corps

POSTED

about 10 hours ago

DEADLINE

Corydon Well Replacement (C2305)

Solicitation # corydon-well-replacement-c2305-1

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California. The scope of work encompasses a wide range of specialized services including structural, geotechnical, potholing, corrosion analysis, architectural, noise engineering, and surveying, all aimed at supporting the successful execution of the project. This procurement is exclusively targeted toward certified DBE firms as well as other small business categories such as Small Business, Small Disadvantaged Business, Women-Owned Small Business, Veteran-Owned Small Business, and SBA-certified Service-Disabled Veteran-Owned Small Business under a set-aside program administered by the U.S. Small Business Administration. The solicitation is open for responses until August 28, 2026, with the official notice posted on August 3, 2026. Proposals must be submitted through the designated portal, and the primary point of contact for inquiries is Lindsay Stout of Ardurra Group, Inc., reachable via email or phone. The project is classified under NAICS code 541330, though additional applicable codes include 237110, 541490, 90735, 90775, 95826, 92500, and 91831, reflecting the multidisciplinary nature of the services required. Performance of the work is expected to occur in California, and interested firms are encouraged to review the full details on the official portal for specific submission guidelines and requirements.

Ardurra Group, Inc.

POSTED

about 10 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, entails comprehensive professional design, bidding support, and engineering services during construction for a well replacement initiative located in Lake Elsinore, California. The solicitation, identified as C2305, seeks qualified firms to deliver full-service engineering solutions spanning the planning, design, and construction phases, with a focus on ensuring compliance, efficiency, and seamless project execution. The contract is open to Disadvantaged Business Enterprises in alignment with Department of Transportation set-aside guidelines and falls under NAICS code 541330 for architectural and engineering services. Proposals must be submitted by September 1, 2026, with AKM Consulting Engineers serving as the contracting agency and primary point of contact. Katie Neubauer can be reached for further inquiries via phone or email provided in the solicitation. The project demands technical expertise in water infrastructure, regulatory coordination, and construction oversight, with all work performance centered in Riverside County, California. Interested parties are directed to the official solicitation link for additional details and submission requirements.

AKM Consulting Engineers

POSTED

about 10 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-1

The Corydon Well Replacement Project seeks qualified firms to provide comprehensive professional design, bidding support, and construction engineering services for the replacement of an existing municipal groundwater production well with a new facility on Elsinore Valley Municipal Water District property in California. The project encompasses the full lifecycle of well acquisition, from initial hydrogeological evaluation and aquifer analysis through design, construction, testing, and eventual abandonment of the old Corydon Well. This includes civil, structural, mechanical, electrical, and instrumentation design for site facilities; borehole geophysical logging and soil investigations; regulatory permitting with the State Water Resources Control Board and local agencies; environmental and water-quality sampling; and full-time on-site construction management and hydrogeological oversight during drilling and equipping phases. The design must adhere to AWWA potable water well standards, match the existing casing depth, specify a 24-inch stainless steel Ful-Flo louvered screen, and comply with the Build America, Buy America Act, requiring domestic sourcing of iron, steel, and other construction materials with documented certification and waiver support. The project is funded in part by a $400,000 Bureau of Reclamation grant, triggering full compliance with federal regulations under 2 CFR Part 200, including debarment and suspension requirements, lobbying restrictions, audit rights, record retention for four years, and Davis-Bacon and Clean Air Act provisions that flow down to subcontracts exceeding $150,000. Firms responding must demonstrate relevant municipal water and groundwater project experience, provide detailed qualifications for key personnel including licenses and resumes, submit a transparent cost proposal broken down by task with hourly rates and incidental charges, and confirm availability to meet the November 2026 start and May 2028 completion window. Proposals must include formal certifications for American Iron and Steel compliance, non-collusion under Executive Order N-6-22, debarment and suspension status via SAM, lobbying restrictions, and insurance requirements, all completed as specified in Attachment 2. All submissions must be made through the EVMWD PlanetBids portal by the September 1, 2026 deadline, accompanied by a cover letter, three references, a conflict of interest disclaimer, and DBE subconsultant participation data. Evaluation will prioritize demonstrated competence and qualifications, with equal weight assigned to technical understanding and project approach, experience, schedule feasibility, innovation, cost-effectiveness, and overall proposal quality. The award will be based on best value, not lowest price,

GEI Consultants, Inc.

POSTED

about 10 hours ago

DEADLINE

Engineering Services for Yuba City Wastewater Treatment Facility HVAC Improvements Project

Solicitation # 2504-RFP-26

The City of Yuba City is seeking qualified engineering consultants to deliver comprehensive professional services for the replacement and upgrade of the heating, ventilation, and air-conditioning systems at its Wastewater Treatment Facility Laboratory. The scope of work includes evaluating the current HVAC infrastructure and building conditions, diagnosing persistent issues related to temperature control, airflow, ventilation, moisture, and air leakage, and developing, comparing, and selecting viable improvement options. Consultants will be responsible for producing detailed plans, specifications, engineering calculations, and accurate construction cost estimates, as well as providing support during the bidding process and throughout construction to ensure adherence to design intent. Special attention must be paid to maintaining ongoing laboratory operations, incorporating proper commissioning protocols, coordinating with hazardous material protocols, and implementing phased construction or temporary systems to minimize disruption. Proposals must be submitted through Public Purchase by the specified deadline, and all inquiries must be directed via the same platform to ensure transparency and consistency in responses. The solicitation, numbered 2504-RFP-26, was posted on August 3, 2026, with responses due no later than September 4, 2026. Proposals will be evaluated and ranked based on criteria outlined in the request, with selection determined by technical merit and capability rather than price alone. The point of contact for questions is Nicholas Menezes, who can be reached via email or phone, and all updates, addenda, and responses to inquiries will be posted exclusively on Public Purchase, making it mandatory for proposers to regularly check for new information. The project is being managed by the City of Yuba City’s Public Works Department under the State of California, with performance required on-site at the wastewater treatment facility in Yuba City.

City of Yuba City

POSTED

about 10 hours ago

DEADLINE

in about 1 month

ARCHITECTURE/ENGINEERING PROFESSIONAL SERVICES FOR SMALL PROJECTS (CATEGORY B)

Solicitation # URFP-125552

Virginia Polytechnic Institute and State University is seeking qualification statements from architecture and engineering firms authorized to do business in Virginia for small-scale professional services under solicitation URFP-125552. This solicitation is open for submissions until July 31, 2031, and is intended to establish a pool of qualified firms capable of performing limited scope design and engineering projects across various campus locations, primarily in Blacksburg, VA, but potentially at other Virginia Tech sites. The effort is categorized as Category B and is designed to streamline the procurement process for smaller projects that do not require full competitive bidding. Firms interested in participating must demonstrate their experience, credentials, and capability to deliver high-quality architectural and engineering services under this long-term framework. All responses must be submitted through the designated vendor portal, and inquiries should be directed to Kimberly Widrig at kdcromer@vt.edu or 540-231-8543. The solicitation does not specify a set-aside classification or NAICS code, indicating a broad eligibility for qualified A/E firms regardless of size or ownership status, provided they are properly licensed and in good standing to operate within the Commonwealth of Virginia.

Virginia Polytechnic Institute and State University

POSTED

about 11 hours ago

DEADLINE

in almost 5 years

Worth County RFP Engineering Grant Services

Solicitation # PE-77201-NONST-2027-000000026

The Worth County Board of Commissioners is seeking qualified engineering firms to provide a broad range of professional services to support community and economic development initiatives funded by state and federal programs. Firms must be technically competent and properly licensed in Georgia to deliver services including preliminary engineering reports, cost estimates, project planning, surveys, design, permitting support, construction documentation, bidding assistance, construction administration, resident inspection, and project closeout. The County intends to establish one or more contracts, with one potential base agreement for general engineering services and additional task-specific contracts or addendums issued on a project-by-project basis for initiatives funded through programs such as CDBG, CDBG-EIP, GEFA, ARPA, GTIB, and LMIG. Selection through this process does not guarantee assignment to any specific project. Proposals must be submitted by September 4, 2026, and only firms capable of demonstrating successful experience working with local governments on federally and state-funded projects will be considered. All responses must be directed to Nicole Jones at the provided contact information, and submissions must comply with the requirements outlined in the solicitation.

Worth County Board of Commisioners

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Vinal Square Safety Improvements Project

Solicitation # BD-26-1253-CTM01-CTM01-131844

The Town of Chelmsford Department of Public Works is soliciting proposals for the design phase of the Vinal Square Safety Improvements Project, aiming to advance the project from 25% to 75% design submission to MassDOT, with the ultimate goal of reaching 100% design and including construction administration services. Proposals must be submitted by 4:00 p.m. on August 19, 2026, at 9 Alpha Road, Chelmsford, MA 01824, with all bid documents available for review starting August 3, 2026, at 10:00 a.m. via the town’s official bids portal. The solicitation number is BD-26-1253-CTM01-CTM01-131844, and evaluations will be conducted by a designated committee that retains the right to reject any or all submissions without explanation. The project is managed under the authority of the Chelmsford Town Manager’s office and is classified under a state and local government procurement. All interested parties are directed to review the complete scope and bidding requirements outlined in the official documentation posted online.

CTM01 - Town Manager

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Health And Human Services → Billings Area Indian Health Svc

Same awarding agency

ISBEE/IEE Uninterruptible Power Supply (UPS) Replacement

Solicitation # 75H70926BAO-070-RFQ

This solicitation, numbered 75H70926BAO-070-RFQ, is a request for quotation for the replacement of uninterruptible power supply (UPS) systems at the Billings Area Office of the Indian Health Service in Billings, Montana. The acquisition is exclusively set aside for 100% Indian Small Business Economic Enterprise (ISBEE) small business concerns, requiring all offerors to be active and registered in the System for Award Management (SAM) at the time of submission. Proposals must be submitted via email to Vincent.Hansen@ihs.gov no later than August 19th, 2026, at 1:00 p.m. MDT, with the solicitation number included in the email subject line. Quotes must remain valid for 90 days from the submission deadline, and the Government will evaluate offers based on technical capability, past performance, and price, with non-price factors significantly more important than cost. Offerors must respond on a brand-name-or-equal basis, providing detailed manufacturer, model, and technical documentation to demonstrate equivalency to the specified equipment. The period of performance is 90 days following contract award, and contract performance is required at the Billings Area Office location. Offerors are required to comply with numerous federal and HHS provisions and clauses, including those addressing electronic and information technology accessibility under Section 508, requiring submission of an HHS Section 508 Product Assessment Template for any affected equipment. Payment must be requested electronically through the Department of the Treasury’s Invoice Processing Platform (IPP), and contractors must certify compliance with labor standards, whistleblower protections, and other regulatory requirements. The Government reserves the right to award without discussions and may accept a higher-priced offer if it provides superior technical value. Questions on the requirement must be submitted no later than August 10th, 2026, at 1:00 p.m. MDT, and failure to adhere to any specified submission format or requirement may result in rejection of the offer.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

INTENT TO SOLE SOURCE Postage for Meter

Solicitation # 75H70926BAO-025

POSTED

DEADLINE

BFSU Solid Waste Removal

Solicitation # SS-BFSU-26-009

The Indian Health Service (IHS), under the Department of Health and Human Services, has issued a Sources Sought notice (SS-BFSU-26-009) to identify qualified Indian Economic Enterprises (IEEs) or Indian Small Business Economic Enterprises (ISBEEs) capable of providing weekly solid waste collection services. The requirement, classified under NAICS code 562111 with a one-year performance period, covers trash removal at the Blackfeet Service Unit and Heart Butte Clinic in Montana. While this notice is not a solicitation or request for proposals, it serves to inform the acquisition strategy and emphasizes the mandatory application of the Buy Indian Act (25 U.S.C. 47), which mandates preference to IEEs when practicable. To be considered eligible, responding firms must demonstrate at least 51% ownership by Indian individuals, federally recognized Indian Tribes, or Alaska Native Corporations, with a similar majority share (51%) of contract earnings accruing to these entities. Additionally, management and daily operations must be controlled by Indian individuals. Responses must include a capability statement detailing relevant experience in routine solid waste collection—specifically within healthcare or federal facility environments—along with prior contract performance history, a completed Buy Indian Act Indian Economic Enterprise Representation Form, and clear evidence on compliance with ownership, earnings distribution, and management control criteria. The contracting office requires submissions by email within five days of the notice posting. Evaluation focuses on meeting these strict eligibility and capability conditions without formal scoring or competitive technical evaluation, with award considerations governed primarily by socioeconomic compliance under the Buy Indian Act authority. No pricing or funding details are disclosed, and the notice outlines no specific invoicing or inspection protocols beyond service locations and the statutory preference framework.

Solid Waste Collection

POSTED

DEADLINE

Weekly Solid Waste Collection ServicesThis contract outlines the provision of weekly non-hazardous solid waste collection, transportation, and disposal services at three Indian Health Service healthcare facilities located on the Blackfeet Indian Reservation in Browning, Montana. The contract is issued by the Billings Area Indian Health Service, part of the Department of Health and Human Services, and is designated as a Buy Indian Set-Aside specific to Indian Health Services, encouraging participation by eligible Indian-owned businesses. The solicitation focuses on NAICS code 562111, which relates to solid waste collection services. Responses to the subcontract opportunity are due by November 1, 2026. The contract ensures proper waste management to support the health and safety standards at these facilities, contributing to environmental cleanliness and compliance with regulatory requirements on the reservation. The location and service frequency emphasize reliable and ongoing waste removal to maintain facility operations effectively.

Solid Waste Collection

POSTED

DEADLINE

Remote Technical Support and Help Desk Services

Computer Systems Design Services

POSTED

DEADLINE

Onsite Preventative and Corrective Maintenance for GeneXpert Analyzer

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

GeneXpert Services

Solicitation # SS-BFSU-25-072

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE