Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on June 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Technical Specification Compliance & Testing Services

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
Lateral Line Cleaning and CCTV InspectionThe contract entails the cleaning and video inspection of sewer laterals in accordance with PACP standards to prepare for rehabilitation and establish accurate pre-condition documentation. This work is critical for ensuring the integrity and effectiveness of upcoming sewer lining initiatives by identifying existing conditions, blockages, structural defects, and other issues requiring attention prior to intervention. The task requires specialized equipment and trained personnel capable of conducting thorough CCTV inspections and high-pressure cleaning operations that meet industry benchmarks for data quality and safety. This is a subcontract classified under NAICS code 541380 and specifically set aside for Minority Business Enterprises certified by the National Minority Supplier Development Council, emphasizing procurement preferences for MBEs in non-federal contracting. The opportunity was posted on August 7, 2026, with a response deadline of August 20, 2026, and is administered by SAK Construction, LLC. The work is to be performed at a location associated with Caseyville Township, Illinois, along Potomac Drive, though precise geographic specifics are not detailed in the data. Participation requires compliance with PACP standards and the ability to deliver documented video and cleaning results suitable for engineering evaluation and rehabilitation planning.
SAK Construction, LLC

POSTED

about 13 hours ago

DEADLINE

in 12 days
NAICS: 541380
New
SLED
Controlled Substance and Alcohol Testing Services for Region
Solicitation # KITB2601 / IPRO ITB1323
The State of Idaho, through the Department of Health and Welfare, is soliciting proposals for controlled substance and alcohol testing services in Region 1, encompassing Kootenai, Bonner, and Shoshone counties, under Solicitation Number KITB2601/IPRO ITB1323. The contract is structured as a fixed unit cost, indefinite quantity agreement with an anticipated five-year term from September 29, 2026, to September 28, 2031, and may be extended by mutual written agreement, though the total term including extensions will not exceed five years. The successful bidder must operate three brick-and-mortar testing facilities, each located within fifteen miles of designated department offices in Coeur d’Alene, Ponderay, and Kellogg, and provide a full array of testing services including multi-drug panel urine and saliva immunoassays, hair follicle tests, ethyl glucuronide alcohol testing, surface swab detection, spice and bath salt screening, and extended opiate testing. All non-negative results require GC/MS or LC-MS/MS confirmation within five business days, and samples must be frozen and securely retained for at least one year while chain-of-custody documentation is preserved for six years. The contractor must also provide up to two certified expert witnesses for court testimony, offer a mobile testing unit for rural areas if available, and submit a Quality Assurance Plan within thirty days of contract execution addressing client safety, personnel training, information security, and conflict resolution. Invoicing must occur monthly, be signed, and include detailed service line items aligned with the cost matrix, with payment contingent upon submission of accompanying reports and processed under Idaho Code sections 67-2302 and 67-9218, subject to legislative appropriations with no legal obligation to fund. Bidders must complete the required attachments including the Cover Form, State Signature Page, and the provided Excel Bid Schedule, and submit all materials exclusively via the IPRO portal by the September 1, 2026 deadline. A pass/fail product demonstration may be required, and award will be made to the lowest five-year total cost bidder who is both responsive and responsible, subject to financial review and reference checks. Compliance with stringent data security and privacy standards is mandatory, including encryption per NIST/FIPS 140-2, U.S.-only data storage, HIPAA adherence, and prohibition on storing state data on portable devices. The
State of Idaho

POSTED

about 18 hours ago

DEADLINE

in 25 days

AI Contract Overview

Show more

The contract requires independent verification and validation of switch components to ensure full compliance with military technical standards, covering critical areas such as environmental durability, electrical performance, and safety. The work involves rigorous testing protocols to confirm that components withstand extreme conditions and meet the exacting requirements of defense applications, with deliverables focused on documented validation results and compliance reports. This subcontract is open to qualified vendors capable of conducting standardized military-grade evaluations without reliance on manufacturer-supplied data. The opportunity is posted by the Department of National Defence under the Government of Canada, with a response deadline of July 7, 2026, and is classified under NAICS code 541380 for other scientific and technical consulting services. Performance is expected to occur in British Columbia and Nova Scotia, reflecting the geographic scope of relevant defense manufacturing or testing facilities. The solicitation does not specify a set-aside designation, and while no point of contact is listed, interested parties should refer to the official CanadaBuys portal for full details and submission requirements.

General Info

Independent verification of military-grade switch components for compliance in British Columbia and Nova Scotia by July 7, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Independent verification and validation of switch components against military technical standards including environmental durability, electrical performance, and safety.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 332994
New
International
Nonmetallic Hose Assembly SupplyThe contract involves the manufacture and delivery of custom nonmetallic hose assemblies designed for fuel oil service systems on HFX-Class naval vessels, with strict adherence to military specifications. Each assembly must meet rigorous quality and performance standards, including full traceability from raw materials to final product, mandatory bar coding for inventory and logistics tracking, compliance with defined shelf life requirements, and military-grade packaging to ensure durability during transport and storage. The hoses are critical components in naval operations and must be produced under quality control systems that support defense readiness and long-term system reliability. Submissions are due by August 20, 2026, and the contract is structured as a subcontract under the Department of National Defence of the Government of Canada. The work is to be performed at locations in British Columbia and Nova Scotia, reflecting the geographic scope of naval support infrastructure. The NAICS code 332994 identifies this as a specialty manufacturing activity focused on other fabricated metal product manufacturing, indicating specialized production capabilities are required. Participation is open to qualified suppliers capable of meeting defense-grade technical and compliance demands without set-aside restrictions, and all submissions must align with the procurement framework administered through CanadaBuys.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 484121
New
International
Delivery and Installation of Test EquipmentThe contract entails the local delivery and on-site installation of oscilloscopes and multimeters at DRDC Atlantic in Nova Scotia, with responsibilities including unboxing, proper setup, and basic operational verification to ensure the equipment is fully functional upon completion. All work must be performed at the designated government facility, and the contractor is expected to handle logistics and technical installation without requiring additional support from the client beyond access and site coordination. The task is classified as a subcontract under NAICS code 484121, reflecting its focus on specialized transportation and installation services for technical equipment. The solicitation was posted on August 6, 2026, with responses due by August 13, 2026, at 11 PM, indicating a short, time-sensitive window for submissions. The contract is issued by the Department of National Defence on behalf of the Government of Canada, and while specific contact details are not provided, all deliverables must align with federal procurement standards and be completed at the specified location in Nova Scotia. The agreement does not include set-aside provisions, meaning any qualified vendor may bid, but success will depend on demonstrating reliable logistics capabilities and technical expertise in handling sensitive test equipment within a government research environment.
General Freight Trucking, Long-Distance, Truckload

POSTED

1 day ago

DEADLINE

in 6 days
View Details