Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Technical Trainer (JRSS/JWICS)

Active

Federal

Response Deadline10/22/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing a Technical Trainer to deliver on-site instruction for the crew of the EPF-8 under MSCHQ Norfolk projects for the Department of Defense. The primary objective is to conduct training sessions focused on the operation of upgraded JRSS/JSCE and JWICS systems, ensuring the crew is proficient in new system views and operational procedures as directed by the Ship's Master. The successful contractor must secure necessary ship and base access to facilitate the delivery of comprehensive crew training and knowledge transfer. This opportunity falls under NAICS code 611430 and requires a response by October 22, 2026.

General Info

Technical Trainer to provide on-site JRSS/JSCE and JWICS training for EPF-8 crew.

Agency

Department Of Defense → Mschq Norfolk

NAICS

611430 - Professional and Management Development Training

Place of Performance

VA

Set-Aside

NONE

Documents

This scope was carved out of N3220527Q7017.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

YUMA VMS MODERNIZATION

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 22

Submission deadline

Response Deadline

10/22/2026, 12:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Mschq Norfolk

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Mschq Norfolk

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs on-site technical training for prime contractors on MSCHQ Norfolk projects, here for the crew of the EPF-8. Conducts training sessions on the operation of upgraded JRSS/JSCE and JWICS systems. Instructs crew on new system views and operational procedures as designated by the Ship's Master. Requires ship and base access. Delivers completed crew training and knowledge transfer.

Similar Contracts

Same NAICS industry code

RFI 243824 Safety and Compliance Training Courses Provider

Solicitation # RFI 243824

Pacific Gas and Electric Company (PG&E) has issued Request for Information RFI 243824 to identify and assess qualified training providers capable of delivering safety and compliance training across its California service territory. The primary objective is to evaluate the instructional capacity, geographic coverage, and service offerings of organizations that can support ongoing workforce development. The scope of work encompasses instructor-led, hands-on, and refresher training in several critical areas, including OSHA 10-Hour and 30-Hour Construction Safety, HAZWOPER, Confined Space Entry, and Flash Suit Training. Additionally, the requirement covers Fall Protection for Authorized and Competent Persons, as well as PG&E-specific training for Cargo Securement and Rigging for Material Handlers. This opportunity is open to various small business designations, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, and Veteran-Owned Small Businesses under NAICS code 611430. All prospective providers must adhere to the PG&E Supplier Code of Conduct. Interested parties were required to register their interest by October 14, 2026, with formal responses due by November 4, 2026, at 12:00 PM PT. As this is an RFI intended for market research and capability assessment, submission of information does not guarantee an invitation to bid in a subsequent formal solicitation.

Pacific Gas and Electric Company

POSTED

about 10 hours ago

DEADLINE

Software Implementation and Training ConsultantThis subcontract opportunity is for a Software Implementation and Training Consultant to provide turnkey software setup and instructional training for prime contractors managing Broward County volunteer projects. The selected consultant will be responsible for configuring systems to meet specific administrative requirements, coordinating the validation of historical data, and developing comprehensive training resources for both staff and volunteers. Delivery of these services will be conducted through webinars and instructional materials to ensure a fully configured system and a proficient user base. Interested parties should note that the response deadline is November 3, 2026, and the project falls under NAICS code 611430.

POSTED

about 21 hours ago

DEADLINE

Investment Software Operational TrainingThe Investment Software Operational Training subcontract involves providing specialized operational and administrative training for prime contractors working on City of Houston municipal projects. The selected provider will be responsible for developing and delivering end-user and system manager instruction utilizing a software sandbox environment to ensure practical application. Key deliverables include the creation of comprehensive training documentation and detailed user manuals. The ultimate goal of the contract is to provide the city with fully trained staff and a complete set of instructional materials. This opportunity falls under NAICS code 611430 and is associated with the City of Houston in Texas.

City of Houston

POSTED

about 22 hours ago

DEADLINE

Emergency Management Training and Education ProviderThe Emergency Management Training and Education Provider subcontract involves delivering comprehensive end-user education and training for prime contractors working on Richmond County Board of Education projects in Georgia. The primary objective is to ensure that staff and administrators are fully prepared to support and utilize a new emergency system through the development of instructional materials, training manuals, and e-learning modules. The selected provider is responsible for conducting instructional sessions and delivering documented training completion reports to verify staff proficiency. This opportunity, categorized under NAICS code 611430, was posted on October 13, 2026, with a response deadline of November 9, 2026.

Richmond County Board of Education

POSTED

about 22 hours ago

DEADLINE

Leadership Development FacilitatorsThis subcontract for Leadership Development Facilitators involves delivering specialized training sessions for prime contractors supporting Illinois Department of Children and Family Services leadership projects. The scope of work includes facilitating four statewide cohorts consisting of approximately 50 participants each over four-day sessions, leading executive facilitation, and conducting outcome-based training. The selected provider is responsible for submitting all completed training sessions and corresponding attendance documentation. To qualify, the lead trainer must possess a Master's degree and a minimum of five years of leadership experience. This opportunity falls under NAICS code 611430 and is managed by the state of Illinois. Interested parties should note the response deadline of October 20, 2026.

PROCUREMENT418 - PROCUREMENT

POSTED

about 23 hours ago

DEADLINE

PO27-059 Leadership Development Program

Solicitation # 27-418DCFS-PROCU-B-54497

Solicitation 27-418DCFS-PROCU-B-54497, contract PO27-059, is a small purchase procurement issued by the Illinois Department of Children and Family Services (DCFS). The agency seeks a qualified contractor to design, develop, and deliver a comprehensive leadership development and organizational effectiveness program. The primary objective is to strengthen leadership capacity, improve employee engagement, and support organizational culture for approximately 200 participants, delivered through four four-day statewide cohorts of roughly 50 people each. The contract is subject to the laws of the State of Illinois and may be funded in whole or in part by federal funds. To qualify, vendors must demonstrate at least five years of experience in leadership development, organizational consulting, executive coaching, and change management for complex public sector or healthcare organizations. The lead trainer and coach must hold a master's degree and possess five years of leadership experience in related disciplines. Required insurance includes General Commercial Liability of 1 million dollars per occurrence and 2 million dollars aggregate, Auto Liability of 1 million dollars per occurrence, and statutory Worker's Compensation. Payments are governed by the State Prompt Payment Act, with invoices for services through June 30 due by July 31. Vendors must submit their responses and resumes via BidBuy, ensuring compliance with Illinois Standard Certifications regarding tax compliance, non-discrimination, and conflict of interest.

PROCUREMENT418 - PROCUREMENT

POSTED

about 23 hours ago

DEADLINE

Nutrition Program Technical Assistance SpecialistThe Nutrition Program Technical Assistance Specialist subcontract involves performing Targeted Technical Assistance Reviews and pre-operational visits for prime contractors supporting the Florida Department of Agriculture and Consumer Services. The selected provider will conduct on-site and off-site evaluations to ensure that new or non-compliant SFAs adhere to all applicable federal and state regulations, specifically focusing on USDA guidelines. Key responsibilities include validating operational readiness, providing technical guidance, and delivering formal TTAR reports and pre-operational certifications. This opportunity is categorized under NAICS code 611430 and requires personnel to undergo background checks. Interested parties must submit their responses by November 2, 2026. The contract focuses on maintaining regulatory compliance and operational efficiency within nutrition programs through rigorous evaluation and specialized technical support.

Department of Agriculture and Consumer Services

POSTED

about 24 hours ago

DEADLINE

Apple Education CPD and Digital Skills TrainingThe Apple Education CPD and Digital Skills Training subcontract involves the delivery of accredited professional development for prime contractors working on Lincoln Anglican Academy Trust projects. The scope of work focuses on enhancing digital skills and curriculum integration, specifically utilizing Apple education applications such as Showbie. The primary objective is to ensure teaching staff are fully trained and receive formal CPD certification. To qualify, the provider must be an accredited training entity with demonstrated real-world classroom experience implementing Apple devices within a 1:1 student-to-device environment. This engagement is categorized under NAICS code 611430 and is managed by the Lincoln Anglican Academy Trust.

Lincoln Anglican Academy Trust

POSTED

DEADLINE

Technical Writer and Training SpecialistThis subcontract opportunity is for a Technical Writer and Training Specialist to support Rural Affairs projects for the Government of Ontario. The selected provider will be responsible for authoring comprehensive system and user documentation, including product manuals and training materials tailored for end-users. A key requirement of the contract is the commitment to update all documentation at least once per year to ensure accuracy and relevance. The primary deliverables include completed user manuals, detailed training guides, and the execution of training sessions for prime contractors. Interested parties must submit their responses by November 13, 2026, in accordance with the solicitation posted on October 13, 2026. The work falls under NAICS code 611430, focusing on professional and management development training.

POSTED

DEADLINE

in about 1 month

GibbsCAM Essentials Training InstructorThis subcontract involves providing instructor-led technical training for prime contractors supporting the NASA Shared Services Center. The selected provider will deliver a GibbsCAM Essentials course via a live online classroom format, consisting of eight sessions conducted over a two-week period. The scope of work includes real-time instruction and interactive question and answer sessions for two students. To ensure the quality of the technical delivery, the contract requires that all instruction be performed by GibbsCAM certified instructors. This professional development effort falls under NAICS code 611430 and is managed through the National Aeronautics And Space Administration.

NASA Shared Services Center

POSTED

DEADLINE

CPE Program Compliance and Educator Certification ConsultingThe CPE Program Compliance and Educator Certification Consulting subcontract involves providing expert consultation to prime contractors supporting the Department of Veterans Affairs Network Contracting Office 6. The primary objective is to ensure that Chaplain Service Offices maintain full compliance with all applicable regulatory and professional standards. This includes delivering specialized guidance on the education and training of CPE residents and students, as well as supporting the certification of ACPE Certified Educators through the application of ACPE Certification Frameworks. Key deliverables for this engagement include the production of detailed consultation reports and the provision of formal certification guidance. The project falls under NAICS code 611430 and is managed through the Department of Veterans Affairs. Interested parties should note the response deadline of October 23, 2026.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Conference Curriculum & Training DesignerThe Conference Curriculum and Training Designer subcontract, issued by the Corporation for National and Community Service, focuses on the creation of educational and training components for prime contractors managing AmeriCorps conference projects. The selected provider will be responsible for developing comprehensive conference management training curricula, including lesson plans, session plans, and resource toolkits tailored for both virtual and in-person environments. A critical requirement of the contract is ensuring that all developed materials and deliverables are fully Section 508 compliant. Operating under NAICS code 611430, the project involves the end-to-end delivery of these instructional resources to support the agency's training objectives.

POSTED

DEADLINE

More opportunities from Department Of Defense → Mschq Norfolk

Same awarding agency

Network Infrastructure Technician (Wireless/PBX)This subcontract for Network Infrastructure Technicians involves the installation of wireless networking and telephony equipment on the EPF-8 vessel for MSCHQ Norfolk projects. The primary scope of work includes replacing obsolete Wireless PBX equipment and Wireless LAN Controllers using Government Furnished Equipment, specifically integrating GFE Part No. 20712158-1 into the JWICS system to deliver a fully operational wireless network infrastructure. The project falls under NAICS code 238210 and requires strict compliance with DFARS 252.204-7018. Interested parties must note the response deadline of October 22, 2026, for this Department of Defense initiative.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 4 hours ago

DEADLINE

VMS Server & Software Integration SpecialistThis subcontract for a VMS Server and Software Integration Specialist involves the installation and configuration of Video Management Servers for MSCHQ Norfolk projects, specifically focusing on an upgrade for the EPF-8 vessel. The scope of work includes the removal of obsolete VMS1 and VMS2 servers, the installation of new hardware, and the upgrading of Ocularis software to ensure alignment with EPF-13 specifications. The selected provider will be responsible for performing comprehensive testing and inspection of the JRSS system to verify full camera functionality, resulting in a fully operational Ocularis VMS. Due to the nature of the work, personnel must obtain and maintain necessary ship and base access. This opportunity was posted on October 14, 2026, with a response deadline of October 22, 2026, under NAICS code 541512.

Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

Tanker Voyage Charter

Solicitation # N3220527R6011

Deep Sea Freight Transportation

POSTED

about 4 hours ago

DEADLINE

YUMA VMS MODERNIZATION

Solicitation # N3220527Q7017

Solicitation N3220527Q7017 is an Invitation for Bid issued by MSCHQ Norfolk for the YUMA EPF Video Management System (VMS) Upgrade. This Women-Owned Small Business set-aside project requires technical services to replace Video Management Servers VMS1 and VMS2 and upgrade to the Ocularis system on EPF-8, utilizing the version currently installed on EPF-13. The scope of work includes the upgrade of Wireless PBX and Wireless LAN Controllers using Government Furnished Equipment, followed by comprehensive testing and inspection of the JSCE and JRSS systems to ensure all hardware, software, and cameras are functioning properly. Additionally, the contractor must provide on-site crew training on JRSS/JSCE and JWICS systems, focusing on operational procedures and the configuration of new views. The period of performance is scheduled from November 16, 2026, to December 18, 2026, with work performed at Lamberts Point, Norfolk, VA. This is a Firm Fixed Price contract requiring a detailed price breakdown of labor hours, hourly rates, travel, and materials. Bids are due by October 22, 2026, at 1:00 PM. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with various Federal Acquisition Regulations, including Buy American and Service Contract Labor Standards. Inspection and acceptance will occur at the destination in Norfolk, VA, under the responsibility of the government.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

Eaton Power Distribution Equipment SupplierThis subcontract involves the procurement and delivery of Eaton brand electrical components for the USNS MERCY Hospital Admin Renovation project managed by Mschq Norfolk. The selected supplier must be an authorized Eaton distributor responsible for providing specific power cables, circuit breakers, and panelboards. All materials must be delivered directly to the MSC Warehouse. Strict adherence to Department of Defense packaging and crating standards is required, specifically DODMANUAL 4140.01, MIL-STD 2073-1, and MIL-STD 129R, including the use of ISPM 15 certified wood crating. The opportunity is categorized under NAICS code 423610, with a response deadline set for October 29, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

USNS ALAN SHEPARD FY26 MTA

Solicitation # N3220526R0025

Solicitation N3220526R0025 is a negotiated Request for Proposal issued by the Military Sealift Command (MSC) Norfolk for the Mid-Term Availability (MTA) of the USNS ALAN SHEPARD (T-AKE 3). The project involves approximately 124 work items, including ship services, inspections, cleaning, repairs, and replacements, to be performed at a contractor facility on the West Coast. This procurement is conducted under FAR Part 15 as a full and open competition. The primary point of contact for the effort is Christina Guevara. The period of performance has been revised through multiple amendments, with the most recent update extending the delivery and performance dates for various line items from November 10, 2026, through December 29, 2026. Offerors are required to execute a Use and Non-Disclosure Agreement for Government Technical Data in compliance with DoDI 5230.24 and DoD-M 5200.01-V4. The final response deadline was established as September 4, 2026. The solicitation has undergone numerous revisions, including amendments to work items, CLIN structures, and liquidated damages clauses.

Ship Building and Repairing

POSTED

DEADLINE

USNS MERCY Hospital Admin Renovation Components

Solicitation # N3220527Q7012

Solicitation N3220527Q7012 is a firm fixed price requirement issued by the Department of Defense, Mschq Norfolk, for the procurement of specific Eaton brand electrical components, including power cables, panelboards, and circuit breakers. These materials are essential for the reconfiguration and renovation of the Hospital Administration space onboard the USNS MERCY (T-AH 19) to ensure the vessel obtains necessary ABS/USCG approval. The contract is unrestricted and falls under NAICS code 335313. All items must be delivered to the MSC Warehouse in Norfolk, Virginia, on or before March 30, 2027, with inspection and acceptance conducted at the destination. The government will award the contract to the lowest priced technically acceptable quoter. Offerors must provide a comprehensive quote including unit and total firm fixed prices, part numbers for verification, lead times, and the country of product origin. Strict packaging and marking standards are required, specifically adhering to DODMANUAL 4140.01, MIL-STD 129R, and ISPM 15 for wood crating. Invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, Buy American preferences, and prohibitions on certain foreign-made systems.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

USNS MEDGAR EVERS ( T-AKE 13) ROH/DD

Solicitation # N3220526R6120

Solicitation N3220526R6120 is a request for proposals issued by MSCHO Norfolk for the Regular Overhaul and Dry-Docking (ROH/DD) of the USNS MEDGAR EVERS (T-AKE 13). This total small business set-aside under NAICS code 336611 requires the contractor to provide all management, procurement, and technical resources necessary to execute maintenance and repair work, including hull, structural, propulsion, and electrical tasks. The work is to be performed at the contractor's shipyard, with inspection and acceptance conducted in Norfolk, Virginia. The procurement utilizes a Lowest Price Technically Acceptable (LPTA) award basis, requiring offerors to be rated as acceptable in both technical and past performance factors to be eligible for the award. The contract structure includes firm fixed price CLINs for Category A and B work items, with specific requirements for the procurement of contractor-furnished materials and the management of government-furnished property. Offerors must submit a two-volume proposal via the PIEE portal by September 15, 2026, including a detailed price breakdown and technical documentation. Key requirements include adherence to ISO 9001:2001 quality standards, execution of a non-disclosure agreement for technical data, and compliance with various FAR and DFARS clauses regarding government property, security, and domestic preferences. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow (WAWF) system.

Ship Building and Repairing

POSTED

DEADLINE

USNS POINT LOMA (T-EPF 15) Mid-Term Availability

Solicitation # N3220526R6128

Solicitation N3220526R6128 is a small business set-aside for a firm fixed price contract to perform the Mid-Term Availability (MTA) for the USNS POINT LOMA (T-EPF 15). Managed by MSCHQ Norfolk, the scope of work includes voyage repairs, overhauls, and alterations to be executed primarily at the contractor's shipyard. The period of performance is scheduled from April 5, 2027, to June 18, 2027. The project is divided into Category A work items, which are the primary requirements, and Category B work items, which serve as contract options. The evaluation process is based on the lowest evaluated price among responsible offerors who are deemed technically acceptable and possess acceptable past performance. Technical evaluations focus on the offeror's understanding of the work item package, the provision of a detailed project schedule with critical path analysis, and the identification of potential problem areas. Proposals must be submitted in two volumes, general and technical, and include a completed SF 33 and detailed price breakdowns. Additional requirements include a technical non-disclosure agreement for government data, a facility survey, and adherence to specific packaging and marking standards for government-furnished property.

Ship Building and Repairing

POSTED

DEADLINE

Transamerica Delaval JP5 Transfer Pump SupplierThis subcontract involves the procurement of one Transamerica Delaval Inc. Model B3EBX-187S JP5 Transfer Pump for prime contractors working on Department of Defense projects. The supplier is responsible for providing a pump specifically compatible with JP5 fuel transfer, ensuring it meets strict Department of Defense unique identification requirements per DFARS 252.211-7003. The contractor must adhere to DOMANUAL 4140.01 and ISPM 15 standards for packaging before delivering the equipment FOB Destination to Norfolk, Virginia. This requirement is managed by Mschq Norfolk under NAICS code 423830, with a response deadline set for October 26, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

MIL-SPEC Marine Hardware Packaging and CratingThis subcontract for MIL-SPEC Marine Hardware Packaging and Crating involves providing specialized packing, crating, and marking services for heavy marine hardware supporting prime contractors on Military Sealift Command projects. The work is managed under the Department of Defense through Mschq Norfolk and falls under NAICS code 333613. The contractor must adhere to strict military and industry standards, including DOD Manual 4140.01 Volume 9, MIL-STD 2073-1, and ASTM D3951 for packing, and MIL-STD 129R for markings. All shipping crates must utilize ISPM 15 certified heat-treated wood and be delivered as fully packed, marked, and certified shipments on an FOB Destination basis.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

MGPS Copper and Aluminum Anode SupplyThis subcontract through the Department of Defense, managed by Mschq Norfolk, involves the supply of specialized anodes for Impressed Current Cathodic Protection or Marine Growth Prevention Systems. The project specifically supports prime contractors working on the USNS COMFORT (T-AH 20), requiring the manufacture and delivery of copper and aluminum anodes and anode kits. Technical requirements specify that anodes must be produced in 4.75 inch diameters with lengths of 24 and 30 inches, including 40-50mm studs. All components must be fabricated from high-grade marine alloys using precision machining to ensure strict adherence to OEM technical specifications.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS