Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Technical Training & Maintenance Services

Active

Federal

Response Deadline12/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Technical Training and Maintenance Services subcontract supports the USDA Food Safety and Inspection Service by providing specialized training and hardware upkeep for prime contractors. The scope of work includes instructing personnel on kit workflows, sample preparation, and analytical run times, while also executing preventative maintenance agreements. To ensure operational compliance, the contractor must adhere to USDA security awareness training and provide documented maintenance logs and a fully trained laboratory staff. This opportunity is categorized under NAICS code 811219 and is managed by the Department of Agriculture under the FSIS OAS PCMB. The place of performance is located in Athens, Georgia. Interested parties should note that the response deadline for this requirement is December 8, 2026.

General Info

Technical training and hardware maintenance for USDA FSIS in Athens, Georgia by 12/8/2026.

Agency

Department Of Agriculture → Usda, Fsis, Oas Pcmb

NAICS

811219 - Other Electronic and Precision Equipment Repair and Maintenance

Place of Performance

Athens, GA, 30605, USA

Set-Aside

NONE

Documents

This scope was carved out of STEC_Detection .

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STEC Detection

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineDec 8

Submission deadline

Response Deadline

12/08/2026, 05:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Agriculture → Usda, Fsis, Oas Pcmb

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Agriculture → Usda, Fsis, Oas Pcmb

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized training and maintenance for prime contractors on USDA Food Safety and Inspection Service (FSIS) projects. Trains personnel on kit workflows, sample preparation, and analytical run times, and executes preventative maintenance agreements for hardware. Complies with USDA security awareness training for contractors. Delivers trained laboratory staff and documented maintenance logs.

Similar Contracts

Same NAICS industry code

Cisco Extended Warranty and Technical Support Provider

POSTED

about 3 hours ago

DEADLINE

Yaskawa Variable Frequency Drive (VFD) MaintenanceThis subcontract focuses on the specialized maintenance and repair of Yaskawa Variable Frequency Drives for building equipment on California Department of General Services facility projects in Sacramento. The scope of work includes performing diagnostic testing, component repair, and the calibration of VFD settings to ensure optimal performance. To qualify, contractors must possess manufacturer-specific training for Yaskawa drives and maintain strict compliance with DIR General Prevailing Wage requirements. The final deliverables for this engagement consist of fully calibrated VFDs and detailed maintenance logs. The response deadline for this opportunity is December 1, 2026.

California Department of General Services

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Clinical Chemistry Equipment Service TechnicianThis subcontract opportunity is for a Clinical Chemistry Equipment Service Technician to support prime contractors on State of Alabama Clinical Laboratory Services projects. The selected provider will be responsible for performing preventative maintenance, system calibrations, and emergency hardware repairs on clinical chemistry analyzers in strict accordance with manufacturer specifications. Key deliverables include the provision of fully maintained and calibrated equipment along with comprehensive service reports. Qualified candidates must employ manufacturer-certified Field Service Engineers to ensure technical compliance and operational efficiency. This opportunity is categorized under NAICS code 811219 and is associated with the Alabama Clinical Laboratory Services agency. Interested parties should note the response deadline of November 2, 2026.

Clinical Laboratory Services

POSTED

about 7 hours ago

DEADLINE

Managed Maintenance & Helpdesk ServicesThe Managed Maintenance and Helpdesk Services subcontract, issued by the South Yorkshire Mayoral Combined Authority, involves providing technical support and repair services for vehicle fleet projects. The selected provider will be responsible for remote monitoring, diagnostics, fault response, physical repairs, and firmware updates. Key deliverables include maintaining system uptime, resolving fault tickets, and ensuring all firmware is current using remote diagnostic tools. To qualify for remote access, contractors must hold ISO 27001 or Cyber Essentials certification. This opportunity falls under NAICS code 811219 and was posted on October 28, 2026, with a response deadline of December 4, 2026.

South Yorkshire Mayoral Combined Authority

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Laboratory System Technical Support and InstallationThis subcontract for Laboratory System Technical Support and Installation involves providing specialized installation, calibration, and technical support for prime contractors at the Salem VA Medical Center. The scope of work includes coordinating on-site delivery, performing physical installation, and ensuring system calibration using diagnostic software and specialized tools. To ensure quality and compliance, the contract requires the use of manufacturer-certified technicians to deliver a fully commissioned system. In addition to technical setup, the selected provider must conduct technician-led training for VA staff to ensure proper system operation. This opportunity is managed under the Department of Veterans Affairs Network Contracting Office 6 and falls under NAICS code 811219. Interested parties should note the response deadline of November 3, 2026.

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 9 hours ago

DEADLINE

Surgical Instrument Warranty and Replacement ServiceThis subcontract, titled Surgical Instrument Warranty and Replacement Service, is a Service-Disabled Veteran-Owned Small Business set-aside issued by the Department of Veterans Affairs Network Contract Office 19. The project focuses on the replacement and maintenance of malfunctioning or broken spinal surgical instruments for prime contractors operating within the Veterans Affairs Health Care System. The selected provider must possess specialized expertise in Neuro Spine and Ortho Spine to ensure the delivery of fully functional instrument sets maintained over a 12-month period. Key operational requirements include replacing broken or inadequate instruments at no cost and coordinating all preventive maintenance efforts with the Oklahoma City VAHCS Biomedical Engineering Department. Performance will take place in Oklahoma City, Oklahoma. Interested parties should note the response deadline of November 6, 2026, and the classification under NAICS code 811219.

Network Contract Office 19 (36C259)

POSTED

about 9 hours ago

DEADLINE

Non-Crystal Oscillator Repair and RFI RestorationThis subcontract with Navsup Weapon Systems Support under the Department of Defense involves the teardown, evaluation, repair, overhaul, and upgrade of Non-Crystal Oscillators for Navy project prime contractors. The scope of work includes disassembling units to identify failures, replacing faulty components, and utilizing precision electronics testing equipment and specialized tooling to restore NSN 5955-01-426-2653 units to their original specifications. The contractor is required to deliver two repaired oscillators in Ready for Issue status while ensuring full compliance with Buy American and Government-furnished property clauses. This effort falls under NAICS code 811219, with a response deadline set for November 30, 2026.

Navsup Weapon Systems Support

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Power Supply Electronics Repair and OverhaulThis subcontract for Power Supply Electronics Repair and Overhaul involves the teardown, evaluation, repair, and modification of Power Supplies under NSN 6130-01-495-5240. Supporting prime contractors for Navsup Weapon Systems Support Mech projects, the selected provider must execute all work according to technical orders and manuals. Specific technical requirements include soldering to IPC J-STD-001 Class 2 standards and marking in accordance with MIL-STD-130, REV N. The contractor is required to maintain ISO 9001/9002 or MIL-I-45208 quality systems and possess valid CMMC identifiers. This Department of Defense effort falls under NAICS code 811219. The response deadline for this opportunity is November 9, 2026, with the ultimate goal of delivering fully repaired and modified power supply units.

Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

Audiology Equipment Installation ServicesThis subcontract for Audiology Equipment Installation Services supports prime contractors on Indian Health Service projects within the Navajo Area. The scope of work involves the unpacking, configuration, and calibration of hearing aid fitting and verification systems to ensure accuracy across a frequency range of 200 to 16,000 Hz. The selected provider is responsible for integrating this equipment into the Audiology Department workflow to deliver a fully operational system. The opportunity is designated as a Buy Indian Set-Aside under NAICS code 811219. To be eligible, the contractor must hold manufacturer certification for the specific hardware being installed. The project is managed by the Department of Health and Human Services, with performance taking place in the 87420 zip code area.

Navajo Area Indian Health Svc

POSTED

about 9 hours ago

DEADLINE

Electronic Test Set Subassembly Repair ServicesThe Electronic Test Set Subassembly Repair Services subcontract involves the teardown, evaluation, and repair of the Test Set Subassembly (NIIN: 013697791) for prime contractors supporting NAVSUP Weapon Systems Support projects. The selected provider will be responsible for disassembling subassemblies to pinpoint failed components, performing repairs in strict accordance with technical manuals and drawings, and conducting quality conformance inspections following DI-RELI-80322 standards. The project requires the use of specialized electronic test and measurement equipment to ensure the delivery of a repaired subassembly that meets all operational requirements. This opportunity is categorized under NAICS code 811219 and is managed by the Department of Defense. Responses are due by November 27, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

Provider of Leica Laser Scanner Care Packages (CCP)This small business set-aside subcontract involves providing extended warranties and support contracts for prime contractors working on projects for the Navsup Flt Logistics Ctr Norfolk. The scope of work focuses on delivering active warranty and support contracts for a duration of one to two years, specifically covering service level agreements for the BLK ARC Laser Scanner CCP, CycloREG X60 PLUS CCP, and a two-year BLK2GO Laser Scanner CCP Silver. To be eligible for this contract, the provider must maintain status as an Authorized Leica Service Provider. The performance of these services is designated for San Diego, and the opportunity is categorized under NAICS code 811219.

Navsup Flt Logistics Ctr Norfolk

POSTED

about 9 hours ago

DEADLINE

Solid State Laser Repair and Technical EvaluationThis subcontract involves the technical evaluation, teardown, and repair of Solid State Laser systems (NSN 5860-01-456-5828) for prime contractors supporting U.S. Navy NAVSUP Weapon Systems Support projects. The scope of work requires the complete disassembly of laser assemblies to identify failed components and the execution of repairs according to approved written procedures. All work must be performed using precision optical alignment tools and laser power meters within clean-room facilities to ensure the delivery of fully repaired, tested, and inspected units. The project is categorized under NAICS code 811219 and will be performed in Philadelphia, Pennsylvania. Interested parties should note the response deadline of November 12, 2026. This effort is managed under the Department of the Navy to maintain critical laser system capabilities for naval operations.

Navsup Weapon Systems Support

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Agriculture → Usda, Fsis, Oas Pcmb

Same awarding agency

Laboratory Software & Data IntegrationThe Laboratory Software and Data Integration subcontract supports the USDA Food Safety and Inspection Service by providing software interfaces for detection platforms used by prime contractors. The scope of work includes the implementation of software for analyzing stx subtype data and the configuration of secure remote access portals to ensure a fully licensed and operational system. The project requires strict adherence to federal security and accessibility standards, including NIST 800-53 Rev 5, HSPD-12, FISMA 2014, and Revised 508/WCAG 2.0. Performance for this effort is centered in Athens, Georgia, with a response deadline set for December 8, 2026.

Custom Computer Programming Services

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Laboratory Instrumentation & Platform HardwareThis subcontract opportunity involves the supply and installation of technology platforms and hardware for prime contractors supporting USDA Food Safety and Inspection Service projects. The scope of work focuses on delivering fully operational laboratory instrumentation, including physical analytical platforms such as sequencers, PCR machines, and automated analyzers. The selected provider is responsible for the complete installation and configuration of this equipment, ensuring all power and footprint requirements are met. All integrated information and communication technology must comply with Revised 508 Standards and WCAG 2.0. The project is categorized under NAICS code 334516 and will be performed in Athens, Georgia. Interested parties must submit their responses by the deadline of December 8, 2026.

Analytical Laboratory Instrument Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month

STEC Detection & Identification KitsThis subcontract involves the supply of commercially available diagnostic kits and proprietary reagents used for the detection and identification of Shiga toxin-producing Escherichia coli for prime contractors supporting USDA Food Safety and Inspection Service projects. The required kits must be capable of identifying stx/eae carrying strains across all serogroups and provide technology for stx subtype granularity, ensuring full alignment with the Microbiology Laboratory Guidebook 5C methodology. The project is managed under the Department of Agriculture and is associated with NAICS code 311710. Performance of the contract will take place in Athens, Georgia. Interested parties should note that the response deadline for this opportunity is December 8, 2026.

Seafood Product Preparation and Packaging

POSTED

about 9 hours ago

DEADLINE

in about 1 month

STEC Isolation Procedure & Protocol ConsultantThis subcontract opportunity is for a STEC Isolation Procedure and Protocol Consultant to support prime contractors on USDA Food Safety and Inspection Service projects. The selected consultant will be responsible for the development and validation of colony isolation procedures, specifically designing workflows for STEC isolation in meat-based matrices. This work includes defining critical parameters such as incubation time, temperature, and throughput in accordance with MLG 5C and MLG 1 standards, while utilizing microbiology testing platforms to generate essential sensitivity and specificity data. The project requires the delivery of comprehensive validated protocols and detailed technical reports. Performance will take place in Athens, Georgia, under NAICS code 541715. Interested parties must submit their responses by the deadline of December 8, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 9 hours ago

DEADLINE

in about 1 month

STEC Selective Media SupplierThis subcontract opportunity is for a supplier to provide specialized selective culture media to prime contractors supporting USDA Food Safety and Inspection Service food safety projects. The scope of work involves delivering proprietary reagents and selective media, provided as either agar plates or dehydrated media, specifically designed to isolate Shiga toxin-producing Escherichia coli regardless of serogroup in accordance with Microbiology Laboratory Guidebook 1. To ensure quality and accuracy, the supplier must provide third-party validation from AOAC, AFNOR, MicroVal, or NordVal. The performance of this contract will take place in Athens, Georgia, under NAICS code 325998. Interested parties must submit their responses by the deadline of December 8, 2026.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Solicitation # STEC_Detection

The USDA Food Safety and Inspection Service (FSIS) has issued a sources-sought Request for Information (RFI) to identify commercially available kits for the detection and identification of Shiga toxin-producing Escherichia coli (STEC) in raw beef and other food products. The agency is specifically interested in technologies capable of identifying stx/eae carrying strains regardless of serogroup, with a particular focus on the granularity of stx subtype information. This market research effort seeks detailed data on technical capabilities, performance characteristics such as sensitivity and specificity, operational requirements, and per-kit technology costs. The place of performance is identified as Athens, Georgia, under NAICS code 334516 for Analytical Laboratory Instrument Manufacturing. Interested respondents must submit their capability statements and associated literature to Eric Schnitzler by 12:00 PM Eastern Time on December 8, 2026. Submissions must include comprehensive company identification, SAM registration details, and socioeconomic status certifications. Additionally, respondents must demonstrate the ability to comply with stringent IT security standards, including FISMA 2014, NIST SP 800-53 Revision 5, and HSPD-12 for remote access, as well as Revised 508 Standards for accessibility. This RFI is for planning purposes only and does not constitute a formal solicitation, request for quote, or commitment by the government to enter into a contract.

Analytical Laboratory Instrument Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Solicitation # STEC_Media

The USDA Food Safety and Inspection Service (FSIS) has issued a sources-sought Request for Information (RFI) to identify commercially available colony isolation procedures and selective media for Shiga toxin-producing Escherichia coli (STEC). The primary objective is to find protocols that increase the likelihood of identifying and isolating a variety of STEC in raw beef and other food products from mixed populations, specifically seeking media that do not rely on STEC serogroups. This effort is for information and planning purposes only and does not constitute a formal solicitation or a commitment to enter into a contract. Interested respondents must submit capability statements by 12:00pm Eastern Time on December 8, 2026, to the primary point of contact, Eric Schnitzler. Submissions must include a portfolio of media supporting STEC testing, technical performance characteristics, cost options on a per plate and batch basis, and third-party validation data from organizations such as AOAC, AFNOR, MicroVal, or NordVal. Additionally, respondents must provide company details, including their SAM UEI, CAGE code, and tax identification number, and must be registered in the System for Award Management (SAM). The request is categorized under NAICS code 334516 for Analytical Laboratory Instrument Manufacturing, with performance expected in Athens, Georgia.

Analytical Laboratory Instrument Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS