Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on August 18, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Technology Insertion (TI)-24 and TI-26 Total Ship Monitoring System

Closed
N00024-20-R-6132Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334511
New
Federal
COMPUTER,FUEL MANAG
Solicitation # N0038327QAA08
Solicitation NO0383-27-Q-AA08, issued by NAVSUP Weapon Systems Support Philadelphia, is a requirement for the repair, testing, and inspection of the Computer, Fuel Manage (NIIN 015238319, P/N 512010-03-01). The scope of work requires the contractor to return assets to a Ready For Issue condition, specifically including the replacement of all seven transorbs on the internal Fuel Interface Card per Engineering Investigation WC2EI-H1Y-0002-21S. The contractor is responsible for providing all necessary tooling, fixtures, and materials, with a strict prohibition on the use of MIL-W-81381 wire in favor of SAE-AS22759 series wire. Performance is subject to a one-year induction period from the date of award, and the contractor must adhere to specific Repair Turnaround Times and report all transactions via the Commercial Asset Visibility system. The government intends to make a single award based on a best-value determination, prioritizing past performance over price. Technical requirements include compliance with ISO 9001 or SAE AS9100 quality standards and ANSI/NCSL Z540 or ISO-10012-1 calibration standards. Packaging must adhere to MIL-STD-2073-1 and ASTM D3951-18, with marking following MIL-STD-129. Administrative requirements include electronic invoicing through Wide Area Workflow and compliance with various FAR and DFARS clauses, including Buy American and cybersecurity reporting. The contractor is also required to manage Beyond Economical Repair and Missing on Induction determinations through DCMA and the Procuring Contracting Officer.
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month

General Info

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

DC, 20001, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

2 updates
PhaseClosed
Posted

Sources Sought

Deadline changed

Response deadline changed from Aug 14, 2020 to Sep 14, 2020.

Notice updated

The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsea Hq
Contacts2 people available
OfficeWASHINGTON NAVY YARD, DC, 20376-5000, USA
Office AddressWASHINGTON NAVY YARD, DC, 20376-5000, USA

Full Description

Show more
The Naval Sea Systems Command (NAVSEA) is conducting market research to identify potential sources that possess the capability to provide engineering design development and manufacture of the Technology Insertion (TI)-24 and TI-26 Total Ship Monitoring System (TSMS) hardware and software systems, technical insertion kits, trainers, and associated spares in support of the Acoustic - Rapid COTS Insertion (A-RCI) upgrades for LOS ANGELES, VIRGINIA, and COLUMBIA class submarines. The procurement will also include technical service, installation support, in-service support, and partial technology enhancements such as server/hard drive updates and infrastructure baselines such as switches and infrastructure cablings, as needed, in support of Fleet requirements for software and/or hardware production improvements on TSMS systems or upgrade kits. The TSMS will be procured under a full and open competitive contract. The TSMS will implement Commercial Off-the-Shelf (COTS) products and non-developmental item(s) (NDI). The TSMS contains upgraded signal processing capability and is reconfigurable to support processing of multiple acoustic and array sensors. The proposed procurement will be a 7-year Cost Plus Fixed Fee (CPFF), Cost Plus Incentive Fee (CPIF), Firm Fixed Price (FFP), and Cost type contract, spanning between Fiscal Year (FY) 2023 and FY 2029. The proposed contract will include approximately 490,000 man-hours of engineering design development and technical support. In addition to the Engineering Development Model (EDM) in FY23, the production procurement will include the following shipset quantities: thirteen (13) in FY24; fourteen (14) in FY25; seventeen (17) in FY26; thirteen (13) in FY27; and eleven (11) in FY28. Respondents must demonstrate the required level of technical expertise, as well as the ability to fulfill the mandatory requirements as described in Attachment 1 - Statement Of Work and Attachment 2 - The overall AN/BQQ-10 A-RCI TI/APB Build Schedule for TI-24, and TI-26. Respondents must provide detailed narratives and supporting rationale/data to identify how their knowledge, skills, and abilities meet the requirements listed in Attachments 1 and 2. These documents will not be posted online as an attachment to the sources sought notice. At this time, national policy does not support release of this document to foreign sources. The respondents must have facilities and equipment necessary for the system development, testing, integration, production and performance of the Statement of Work (Attachment 1) in support of all Technology Insertion (TI) baselines (TI-24, and TI-26). The respondents shall describe the layout of space, and provide a diagram of its facilities to demonstrate that they have adequate design, development, testing, and manufacturing capability and capacity for successful performance of all described requirements, including system and engineering support facilities and manufacturing facilities. The respondents must describe and discuss the facilities for the physical inspection and storage of incoming materials and vendor supplied items, production, fabrication, and assembly, performing critical processes and procedures, and development, production test, and inspection. The respondents shall state whether the facilities are leased or owned. The respondents must have a facility security clearance issued by the Defense Security Service at the SECRET Level. The respondents must be able to field the Key Personnel in Attachment 3 of this notice. Notional Non-Key personnel staffing levels are left to the respondents to propose. Respondents are strongly encouraged to provide an innovative approach that could improve the technical, including staffing, and cost performance without sacrificing the quality of maintenance and timely delivery of the systems to the warfighters. Respondents must provide documentation or examples of the ability to design, integrate, test, produce and support all baselines and hardware deliveries to the fleet and all associated integral and ancillary support capabilities from past experience. Responses to this source sought notice should be submitted to Jim Vossler at james.r.vossler@navy.mil and Ashley Houghton at ashley.houghton@navy.mil. All responses shall be unclassified and must be received no later than 5:00PM Eastern Standard Time (EST) on 14 Aug 2020. The subject line of emails containing responses or questions related to this notice should reference the solicitation number for this notice and "Technology Insertion (TI)-24 and TI-26 Total Ship Monitoring System." Please limit responses to a maximum of thirty (30) pages; a table of contents will not count as part of the 30 page limit. Attachments are allowed for items such as Facility layout diagrams and resumes, and will not count toward the 30 page limit, however, attachments are for reference only. Any discussion of the content of any attachment needs to be addressed within the written response and is subject to the 30 page limit. The cover pages shall include the following information: 1. Company name, Address, Point of Contact, Phone Number, and E-mail address. 2. Identification and verification of the company's business size (i.e., small, large) relative to NAICS Code 334511, Size Standard: 750 employees. Small Businesses are reminded under FAR 52.219-14, Limitation on Subcontracting, for services, that at least 50 percent of the cost of contract performance incurred for personnel shall be expended for employees of the concern. Include the percentage of work that will be self-performed on this project. Procedures for obtaining the Statement of Work (Attachment 1) and the Total Ship Monitoring System Performance Specification are referenced in Attachment 1. The Statement of Work (SOW) and the referenced TSMS Specification will be available only to those companies with a validated security clearance at a minimum SECRET clearance level. To attain validation of security clearance, prospective respondents must submit a written request to Jim Vossler at james.r.vossler@navy.mil and Ashley Houghton at ashley.houghton@navy.mil. The written request must include the company name, cage code, and complete destination address and security point of contact. The controlled documents may only be provided to prospective respondents following approval by the NAVSEA Office of Security Programs and the Contracting Officer. The SOW will be sent by e-mail. The SONAR Specification will be available for view only in the reading room located at Naval Undersea Warfare Center, Newport, RI. No copies or notes will be allowed in the reading room. The Government undertakes no obligation to prospective respondent to assist in the attainment of requisite security clearance(s) so that the prospective respondent may provide a response to this notice. Foreign company access to these documents and other controlled information will be addressed if and when a Request for Proposal (RFP) is issued. Prospective respondents are advised DFARS 252.204-7004 Alternate A, System for Award Management would apply to any solicitation issued for this requirement, and lack of current registration in the System for Award Management database will make a respondent ineligible for award. Information on the System for Award Management database may be obtained via the World Wide Web at https://www.sam.gov. The Government will consider all comments received, but does not commit to providing a response to any comments or questions received as a result of this sources sought notice. This notice is for information and planning purposes, and the Government will not pay or otherwise reimburse respondents for information submitted. The Government is not soliciting, nor will it accept proposals as a result of this sources sought notice. The sources sought notice is a market research tool being used to determine the existence of qualified and experienced sources. All interest parties responding to this sources sought notice is not a request to be considered for award. If a solicitation is issued in the future, it will be announced via the Government wide point of entry (https://www.beta.sam.gov/) and all interested parties must respond to that solicitation announcement separately from any response to this sources sought notice. A response to this notice will not be considered a request to be added to a bidders list or to receive a copy of the solicitation.

More opportunities from Department Of Defense → Navsea Hq

Same awarding agency

NAICS: 334511
New
Federal
AN/BYG-1 Applications Re-Architecture
Solicitation # N0002426R6222
Solicitation N0002426R6222, issued by the Naval Sea Systems Command (Navsea HQ), seeks a contractor for the AN/BYG-1 Applications Re-Architecture. This effort involves the re-architecting of applications associated with the AN/BYG-1 system. The solicitation was posted on October 7, 2026, with a response deadline of November 5, 2026. The primary point of contact for the effort is Michael Ravnitzky, with Matthew C. Hedrick serving as the Contracting Officer. Due to the sensitive nature of the work, strict security and data handling requirements are in place. Offerors must possess a SECRET security clearance and provide a verified DD Form 2345 Military Critical Technical Data Agreement and a signed Terms of Use Agreement to access Government Furnished Information, source code, and technical documents. All data must be handled in accordance with NISPOM standards, and the transmission of information to foreign nationals or outside the United States is prohibited without a valid export license. Furthermore, the use of public cloud repositories or external AI tools for processing technical data is strictly forbidden. Contractors are required to destroy all provided data within 180 days of the RFP closing and maintain destruction records for five years.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 16 days
View Details
NAICS: 334511
New
Federal
Navy Electronic Chart Display and Information System (ECDIS) Hardware and Software Production
Solicitation # N00025-26-R-5246
The U.S. Navy, through the Portfolio Acquisition Executive Mission Systems and Program Manager Warfighting / Applications (PMW/A 520), is soliciting proposals for the development, production, integration, testing, fielding, and lifecycle sustainment of the Electronic Chart Display and Information System (ECDIS) hardware and software. This full and open competition supports both surface and subsurface platforms, specifically focusing on the manufacture and assembly of AN/SYN-1 and Scalable IBS (S-IBS) hardware, alongside the maintenance and modification of software using Government Furnished Information. The contract is structured with one base year and four one-year option periods beginning in FY27, with award anticipated in Q4 FY27. The procurement utilizes a best-value tradeoff process, prioritizing technical approach and management approach over total evaluated cost and price, while past performance is rated on an acceptable or unacceptable basis. Hardware deliverables are priced via a stepladder structure, while software and hardware engineering support are provided as cost-plus-fixed-fee level-of-effort tasks. Key requirements include a Secret facility and personnel clearance, compliance with ANSI/ASQ/ISO9001:2015 quality standards, and strict adherence to cybersecurity and CUI protection frameworks. Deliveries are generally FOB Destination, with specific timelines ranging from 60 days to 18 months after award or option exercise.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 3 months
View Details
NAICS: 336611
New
Federal
USS MAKIN ISLAND (LHD 8) FY28 Docking Selected Restricted Availability (DSRA) Request for Proposal(s)
Solicitation # N0002426R4421
The Naval Sea Systems Command (NAVSEA) is soliciting proposals for the USS MAKIN ISLAND (LHD 8) Fiscal Year 2028 Docking Selected Restricted Availability (DSRA). This Signature Availability is a comprehensive effort combining maintenance, modernization, and repair, requiring a contractor with substantial West Coast facilities, including a capable pier and dry-dock. The scope of work is extensive, with estimated man-days of approximately 284,631 for maintenance and 38,416 for modernization, covering areas such as hull structure, propulsion and electric plants, auxiliary systems, and structural welding. The government anticipates making a single Firm Fixed-Price award in or before March 2027, with performance beginning in November 2027 and an expected completion date of October 30, 2029. The procurement is not set aside for small businesses due to the complexity and magnitude of the requirements. Proposals will be evaluated based on Best Value using trade-off procedures, focusing on technical eligibility, physical resource capacity, past performance, manpower, small business participation, and the proposed schedule and execution approach. Key deliverables include an integrated production schedule and an initial duration analysis due 60 days post-award. The contract includes specific provisions for growth work, including an estimated 211,989 direct labor hours and over 9.5 million dollars in materials, as well as a Small Dollar Value Growth incentive program. Offerors must be registered in the System for Award Management and submit proposals via the PIEE Solicitation Module by November 9, 2026.
Ship Building and Repairing

POSTED

5 days ago

DEADLINE

in 20 days
View Details
NAICS: 333415
Federal
Shipboard Air Conditioning Plant System Sustainment Plan (SSP)
Solicitation # N0002427R4452
Navsea HQ is conducting market research under solicitation N0002427R4452 to identify capable sources for the Shipboard Air Conditioning Plant System Sustainment Plan (SSP). This initiative aims to standardize and scale the sustainment of centrifugal, reciprocating, and rotary air conditioning plants for U.S. Navy surface ships worldwide. The government is evaluating various acquisition strategies, including a single-award Indefinite Delivery, Indefinite Quantity (IDIQ) contract or multiple-source arrangements, to improve materiel condition and operational availability across diverse ship classes and geographic locations. The contemplated scope of work encompasses six primary capability areas: executing Major AC Plant Pit Stops and overseeing Minor Pit Stops, both of which must be completed within a mandatory six-week window; providing embedded AC&R technical expertise at Shore Intermediate Maintenance Activities (SIMAs) for Sailor training and oversight; supplying OEM AC plant materiel and repair parts; managing a global warehouse and rotable pool for Overhaul Parts Packages (OPPs); providing configuration-specific engineering, technical data, and integrated product support; and delivering global unplanned and emergent field services. Interested respondents must submit a response by October 28, 2026, including a completed Capability Certification Matrix and supporting evidence of their ability to perform these requirements organically or through teaming arrangements.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

7 days ago

DEADLINE

in 8 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS