This Solicitation opportunity from Department Of Defense was posted on May 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

TEE, TUBE

Closed

SPE7M3-26-T-5901Federal

Submission Closed06/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M3-26-T-9002

Solicitation SPE7M3-26-T-9002 is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 930 units of pipe plugs, identified by NSN 4730015085709. The requirement is issued under the First Destination Transportation program with shipping based on FOB Origin. The need ship date is October 17, 2026, with an original required delivery date of November 5, 2026, and a delivery lead time of 25 days after order. Inspection and acceptance will take place at the destination, specifically the New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and RP001 for palletization, with DLA Master List requirements taking precedence over ASTM D3951. Invoicing must be processed through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act and the Berry Amendment, as well as DFARS cybersecurity standards for safeguarding covered defense information. Notably, the government will not evaluate or award contracts to offers utilizing additive manufacturing. A price evaluation preference is available for certified HUBZone small business concerns.

FLUID HANDLING DIVISION

POSTED

DEADLINE

47--PLUG,TUBE FITTING,T

Solicitation # SPE7M3-26-T-9067

Solicitation SPE7M3-26-T-9067 is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of threaded tube fitting plugs, NSN 4730012140258. The requirement consists of two line items totaling 98 units, with 41 units on line 0001 and 57 units on line 0002. This is a critical application item and a source controlled drawing item, with approved sources identified as RTX Corporation (P/N 169088-1) and Eaton Aerospace LLC (P/N A40). All items must meet the requirements of basic drawing 55820 169088, Revision C. The delivery period is 49 days after the award, with a need ship date of November 10, 2026, and a final required delivery date of January 18, 2027. Delivery is FOB Origin to DLA Distribution Cherry Point. Quality assurance requires the manufacturer's inspection system to comply with ISO 9001:2015, with sampling conducted per MIL-STD-1916 or ASQ H1331. Inspection and acceptance will occur at the origin per FAR 52.246-2. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Offerors must submit electronic quotes via the DIBBS system by September 21, 2026. The procurement falls under NAICS code 332996 and requires compliance with the Buy American Act, the Berry Amendment, and CMMC Level 2 certification. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system.

FLUID HANDLING DIVISION

POSTED

DEADLINE

27-116 Various Pipe, Coupling & End Sections

Solicitation # 27-116

The City of Augusta, Georgia, is soliciting bids for solicitation 27-116 to establish an annual contract for the provision of various High-Density Polyethylene (HDPE) pipe, couplings, and end sections for the Engineering and Environmental Services Department. These materials are required for the installation and maintenance of water diversion down drains on side slopes and must comply with Georgia Rules for Solid Waste Management and Georgia Erosion and Sedimentation Control Rules. The scope includes a wide range of single-walled and double-walled type S HDPE pipes ranging from 8 to 36 inches, as well as 45-degree elbows, 90-degree bends, and tees. Items will be ordered on an as-needed basis, with delivery required within 60 days of purchase. The successful bidder must agree that no additional shipping, delivery, tariff, or restocking fees will be charged to the city. Bids are due by September 29, 2026, at 11:00 a.m., and must include one original and one electronic version on USB. The award will be granted to the lowest responsive bid that meets all technical specifications, provided the bidder does not require a minimum order amount. A local bidder preference applies to projects of 100,000 dollars or less if the local bidder is within 10 percent or 10,000 dollars of the lowest non-local bidder. Required documentation includes business licenses, W-9s, E-Verify affidavits, and a non-collusion affidavit. Contract terms include a price escalation limit of three percent per item, requested 60 days prior to renewal, and a 30-day written notice requirement for termination. Bidders must also maintain liability and workman's compensation insurance and adhere to strict non-discrimination policies.

POSTED

DEADLINE

Supply of Quick Disconnect Coupling Halves

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Titanium Alloy Tube Elbows (NSN 4730-00-271-9397)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Fluid Flow Restrictors (Orifice Plates)

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Pipe-to-Tube Unions (NSN 4730013078428)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Steel Cadmium Plated Pipe Seal Nuts

FLUID HANDLING DIVISION

POSTED

DEADLINE

Metal Tube Assembly (NSN 4710-01-213-8755) Supplier

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Steel Pipe Assemblies (P/N 5801689872)

POSTED

DEADLINE

Metal Pipe Assembly Fabrication and Supply

FLUID HANDLING DIVISION

POSTED

DEADLINE

Metal Tube Assembly (NSN 4710014345202) Supplier

FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

The contract solicits 48 units of TEE, TUBE with NSN 4730002782433 and part number MS21912W12, governed by SAE AS18280H and SAE AS21912E standards, and classified as a critical application item under a Qualified Products List or Qualified Manufacturers List administered by the Performance Review Institute. All items must be sourced exclusively from accredited manufacturers or assemblers listed in the PRI QML or QPL, and compliance is mandatory. The product must adhere strictly to the DLA Master List of Technical and Quality Requirements, which supersedes all other specifications including ASTM D3951 for packaging. Ozone-depleting chemicals are prohibited, and mercury or mercury-containing compounds are forbidden unless specifically exempted, such as in functional batteries, fluorescent lamps, or instruments specified by NAVSEA; any permitted mercury-containing devices must include shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging and labeling must follow MIL-STD-129 and RP001 DLA packaging requirements, with palletization conforming to DLA standards, and the unit of issue is each (EA) with zero tolerance for quantity variance. Sampling inspections must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance for any non-conforming item, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. Deliveries are to be made FOB origin with a 157-day ADO delivery schedule, with a need ship date of November 3, 2026, and an original required delivery date of December 14, 2026, to DLA Distribution Jacksonville. All items are subject to DFARS and FAR clauses addressing whistleblower rights, cybersecurity information disclosure, safety issue notifications, transport by sea, and the prohibition of internal confidentiality agreements. Contractors must use WAWF for invoicing and receiving reports, maintain active SAM registration, and comply with hazardous materials labeling standards per 29 CFR 1910.1200. The procurement is not a small business set-aside, but offerors must disclose non-domestic materials if applicable and adhere

General Info

Procurement of 48 tube tees for Sikorsky CH-54 helicopters, meeting strict DLA and MIL standards.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

BLDG 175 SWAN ROAD, JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE7M3-26-T-5901 for DLA Land and Maritime Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 29

Solicitation

Response DeadlineJun 3

Deadline has passed

Submission Closed

06/03/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressUSA

Contacts

William Cain

contact@example.gov

+1 (555) 000-0000

Full Description

TEE,TUBE
TEE, TUBE.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
USED ON SIKORSKY CARGO TRANSPORT HELICOPTER
CH-54A AND CH-54B.
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
CLASS 3 THREADS APPLY TO THIS NSN.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
SPE7M3-26-T-5901
SECTION B
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS IS A PERFORMANCE REVIEW INSTITUTE (PRI) QML OR QPL ITEM. PRODUCT
SUPPLIED TO THIS SPECIFICATION SHALL BE MANUFACTURED BY AN ACCREDITED
MANUFACTURER (FOR COMPONENTS) AND/OR ASSEMBLED BY AN ACCREDITIED
MANUFACTURER OR ACCREDITED ASSEMBLING DISTRIBUTOR (FOR ASSEMBLIES) AS
LISTED IN THE PRI QUALIFIED MANUFACTURER LIST (QML)OR QUALIFIED PRODUCTS
LIST (QPL) FOR THIS STANDARD. THE QML OR QPL IS AVAILABLE AT
WWW.EAUDITNET.COM.
CRITICAL APPLICATION ITEM
IAW BASIC NON GOVT STD SAE AS18280H
REVISION NR H DTD 05/01/2021
PART PIECE NUMBER: MS21912W12
IAW REFERENCE NON GOVT STD SAE AS21912E
REVISION NR E DTD 01/01/2023
PART PIECE NUMBER: MS21912W12
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016691430 0001 EA 48.000
NSN/MATERIAL:4730002782433
DELIVERY (IN DAYS):0157
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
SPE7M3-26-T-5901
SECTION B
PR: 7016691430 PRLI: 0001 CONT’D
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
JACKSONVILLE FL 32212-0103
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
RAYMOND MORGAN 904-661-5135
JACKSONVILLE FL 32212-0103
US
Need Ship Date:11/03/2026 Original Required Delivery Date:12/14/2026
SPE7M3-26-T-5901 NSN/Part Number: 4730-00-278-2433 Quantity: 48 EA Purchase Request: 7016691430QTY: 48 Delivery: 157 days ADO